An HNAP call to the device failed because the HTTP connection was broken - EA3500
OK - thanks in advance for your help -
I have a linksys Linksys WMP300 and am able to connect to the EA3500 (shows connected at 270 Mbps) Excellent Connecttion but I can't access the internet or any of the other computers on my network. The stupid thing is that I can connect to my neighbor's unsecured network which is also a linksys router.
All of the other computers on the network connected just fine - my son has a laptop running windows Vista, we have a family computer using Vista, my wife's laptop is Windows 7 (we just had a guest that connected just fine).
Here's the error code I get - any help would be appreciated!
Error code: 82BD0304
Error description: An HNAP call to the device failed because the HTTP connection was broken.
Model name: unknown
Model number: EA3500
Serial number: 12C10603215584
Firmware version: unknown
Operating system: Windows XP SP 3
Software version: 1.4.12005.2
Connection type (WAN): unknown
IP address (LAN): unknown
IP address (WAN): unknown
Computer IP address: 192.168.1.36
Thank you for the reply -
Router is assigning IP address automatically. Although I have been using a static IP address in the past, this is no longer the case.
The WMP300 is on an Windows XP, SP3 PC.
Since running into this issue, I have not only disabled all security (to make sure that firewalls and/or virus software was causing problems) I completely uninstalled my McAfee. I have disabled Windows Firewall also. "Flying Naked" as it were.
I am surprised that Cisco has no solution - others are also having this problem.
It MUST be the router - I am able to connect to my neighbor's router, able to connect to my old Linksys WRT150N. Anyone else have thoughts?
This is frustrating.
Similar Messages
-
CTI warning: The request failed because the timeout limit was exceeded.
hi,
For a perticular IP Phone extension when agent is going to login using CTI agent toolkit then CTI generatin this msg "CTI warning: The request failed because the timeout limit was exceeded". but the other ph is working fine. I have deleted this phone and add againg. And the ph re-associate with PG and JTapi user. but still have the prob. For more plz see the find attached.Your first troubleshooting step here should be to check what JTAPI Gateway thinks is the state of that extension, you can easily check that through procmon. Here's an example from my lab.
C:\Documents and Settings\Administrator>procmon ipcc pg1a jgw1
>>>>jdi 2000
>>>>
Addr: 2000 ActiveLines: 0 RegistrationState: IN_SERVICE
m_CurrentInvokeID = 0
m_elapsedTPServicesRequestSeconds = 0
queuedDTMFDigits = null
sendingDTMFInProgress: N
sendQueuedMsgAddCallObserverResponse: Y
monitoredVirtualDialerPort: N
virtualDialerPort: N
loggedInAgent: N
DeviceStatus : UnmonitoredDevice
addressDeviceType : GWMSG.DEVICE_TYPE_DEVICE
observeredTypeString : logged Out Agent Device
isAddressRestricted: N
addressDeviceProtocol : PROTOCOL_SCCP
silentMonitorStatus : 0
silentMonitoredCallID : -1
TerminalName : SEP001BD52C547F
The RegistrationState should be IN_SERVICE for a phone that is registered with CUCM. If you can see that the phone is registered with CUCM in it's adminsitration pages, made sure that it's in the list of associated devices, made sure you're running the correct version of the jtapi plugin and still see it as OUT_OF_SERVICE, you're probably looking at a CTI Manager defect. CSCti07947 and CSCti11651 spring to mind but there are probably a couple more.
Most of these defects should be fixed in releases like CUCM 7.1(5), 8.0(x) and up. If the issue persists, you're probably best off opening a TAC Service Request to identify the exact cause. The PG (JTAPI Gateway) only shows you what it gets from CTI Manager, so as you can see from my above observations, you'd want to focus your troubleshooting on the CUCM end. -
I have used Azure managed Cache (Basic tier) in my Web App deployed on cloud service.
Now I am getting exception. ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state) on Production environment.
I know, this exception is occurred when memory usage reached more than 95%.
I want to handle this issue in code so please provide the right solution.
My Clients are facing it... so please help me .
Its very urgent.
Server Error in '/' Application.
ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state)
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0007>:There
is a temporary failure. Please retry later. (The request failed because the server is in throttled state)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state)]
Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ErrStatus errStatus, Guid trackingId, Exception responseException, Byte[][] payload, EndpointID destination) +551
Microsoft.ApplicationServer.Caching.SocketClientProtocol.ExecuteApi(IVelocityRequestPacket request, IMonitoringListener listener) +287
Microsoft.ApplicationServer.Caching.SocketClientProtocol.Upsert(VelocityPacketType type, String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[]
tags, String region, IMonitoringListener listener) +357
Microsoft.ApplicationServer.Caching.SocketClientProtocol.Put(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener
listener) +74
Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener
listener) +288
Microsoft.ApplicationServer.Caching.<>c__DisplayClass2f.<Put>b__2e() +146
Microsoft.ApplicationServer.Caching.DataCache.Put(String key, Object value, TimeSpan timeout) +263
Microsoft.Web.DistributedCache.<>c__DisplayClass31`1.<PerformCacheOperation>b__30() +19
Microsoft.Web.DistributedCache.DataCacheRetryWrapper.PerformCacheOperation(Action action) +208
Microsoft.Web.DistributedCache.DataCacheForwarderBase.PerformCacheOperation(Func`1 func) +134
Microsoft.Web.DistributedCache.DataCacheForwarderBase.Put(String key, Object value, TimeSpan timeout) +148
Microsoft.Web.DistributedCache.BlobBasedSessionStoreProvider.SetAndReleaseItemExclusive(HttpContextBase context, String id, SessionStateStoreData item, Object lockId, Boolean newItem)
+177
System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) +1021
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.34009
Thanks
hemaYou should add retry logic in case of retriable exceptions. If the retries fail as well you should reset the DataCacheFactory as suggested in this link.
http://blogs.msdn.com/b/cie/archive/2014/04/29/cache-retry-fails-what-next.aspx
Thanks,
Pallav -
Hi,
We need to implement multi-lingual functionality in SharePoint 2013 on premise server. We have implemented the functionality by referring the below URL.
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/12/sharepoint-2013-variations-creating-site-and-variation-labels.aspx
But after this once we translate any page/document, we are getting below error.
Error: The
translation failed because the online translation service was unavailable. Please resubmit this file for translation. If the files fails again with this error message, contact system administrator.
Machine
We have configured the internet over SharePoint server, also referred below url, but
no success.
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
http://technet.microsoft.com/en-us/library/jj729796(v=office.15).aspx
https://social.msdn.microsoft.com/Forums/office/en-US/dcd0e1d3-2b26-41fa-ad07-77fe234fbc23/machine-translation-service?forum=sharepointdevelopment
If you have faced a similar issue and has any information on how to resolve this issue or how to achieve multi-lingual functionality or configure machine translation service in SharePoint 2013,
it will be great help.
Regards,
Shailendra GuptaHi Shailendra
Please check this below
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7bf9604-d652-4566-aac5-6bcb10dd6ce5/failed-because-there-was-no-translation-available-online-translation-service?forum=sharepointgeneral
Please remember to click 'Mark as Answer' on the answer if it helps you -
I am trying ti sync my iPad. It says the sync failed because the sync did not start.
This usually mean an iTunes error.
The information below may help fix you.
http://appletoolbox.com/2012/05/ipad-iphone-ipod-could-not-be-synced-because-the -sync-session-failed-to-start-fix/ -
Recently installed SharePoint 2013 RTM, on the newsfeed page an error is displayed, and no entries display in the following or everyone tabs.
"The operation failed because the server could not access the distributed cache."
Reading through various posts, I've checked:
- Activity feeds and mentions tabs are working as expected.
- User Profile Service is operational and syncing as expected
- Search is operational and indexing as expected
- The farm was installed based on the autospinstaller scripts.
- Don't believe this to be a permissions issue, during testing added accounts to the admin group to verify
Any suggestions are welcomed, thanks.
The full error message and trace logs is as follows.
SharePoint returned the following error: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException. Internal error code: 55. Contact your system administrator
for help in resolving this problem.
From the trace logs there's several messages which are triggered around the same time:
http://msdn.microsoft.com/en-AU/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxHandling an exception. Exception details: System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in
FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault)./LM/W3SVC/2/ROOT/d71732192b0d4afdad17084e8214321e-1-129962393079894191System.ServiceModel.FaultException`1[[Microsoft.Office.Server.UserProfiles.FeedCacheFault,
Microsoft.Office.Server.UserProfiles, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]], System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089Unexpected exception in FeedCacheService.GetPublishedFeed: Object
reference not set to an instance of an object..
at Microsoft.Office.Server.UserProfiles.FeedCacheService.Microsoft.Office.Server.UserProfiles.IFeedCacheService.GetPublishedFeed(FeedCacheRetrievalEntity fcTargetEntity, FeedCacheRetrievalEntity fcViewingEntity, FeedCacheRetrievalOptions fcRetOptions)
at SyncInvokeGetPublishedFeed(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not
set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault).
SPSocialFeedManager.GetFeed: Exception: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. ) : Correlation
ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of
an object.. ) : Correlation ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)
at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)
at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Social.SPSocialException: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException.
Internal error code: 55.
at Microsoft.Office.Server.Social.SPSocialUtil.TryTranslateExceptionAndThrow(Exception exception)
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass48`1.<S2SInvoke>b__47()
at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)Thanks Thuan,
I've restarted to the Distrubiton Cache servicem and the error is still occuring.
The AppFabric Caching Service is running under the service apps account, and does appear operational based on:
> use-cachecluster
> get-cache
CacheName [Host]
Regions
default
DistributedAccessCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityFeedCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedActivityF [SERVER:22233]
eedLMTCache_1e9f4999 LMT(Primary)
-0187-40e8-aa92-f830
8d47d6e9
DistributedBouncerCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedDefaultCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedLogonToke [SERVER:22233]
nCache_1e9f4999-0187 Default_Region_0538(Primary)
-40e8-aa92-f8308d47d Default_Region_0004(Primary)
6e9 Default_Region_0451(Primary)
DistributedSearchCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedSecurityTrimmingCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
DistributedServerToAppServerAccessTokenCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9 -
My iPad screen is totally frozen with a message box asking me to go to photo stream settings but when either option (ignore or settings) is selected nothing happens. I can't turn off the device either because the screen won't respond. Help please
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
My e mail keeps coming back with a message saying failed because the server does not allow relaying. Please help
Check the suggestions at this website. They may help you get email working all the time.
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/ -
I am getting the message that "the backup disk image '/volumes//data/ ---'s MacBook pro.sparsebundle" is already in use. ---"s is my administrator designation. I don't know what this means or what I should do. My husband and I both use the same time machine with our MacBooks. It is our router for our home network although for the most part our computers are separate. We share an email site, and some files. I am concerned that we are not backed up securely
Most common message in history of the TC.. something has failed to unmount.. Lion and esp. Mountain Lion are affected.
Simple way.. reboot the TC to lose the connections..
Might take a network reboot.
That means restart the whole network from off.. start in order, modem.. router/TC.. clients. 2min gap between them.
But from 5.6 utility you can disconnnect all users.
Read C12 here. http://pondini.org/TM/Troubleshooting.html -
My Time Machine for my iMac has suddenly developed a problem: on repeated attempts to do a backup, it returns the message that the backup failed because the volume is already in use. The solution to the problem may well be simple and obvious, but it'll be a revelation to me and any help will be gratelfully received.
Have a look at Pondini's excellent information here...
http://pondini.org/TM/Time_Capsule.html
Perhaps here...
The Backup disk image ... sparsebundle ... is already in use. -
How do I get rid of "Your connection failed because the communication device is unavailable." ? Pops up 4 or 5 times every time I log on to my MBP.
Hi there
Do you happen to use a USB modem or something like that? This could be the cause.
You could try creating a new network location to see if that fixes it (if not you can just reverse it)
1. Go to Menu -> System Preferences
2. Then go to Network on the 3rd row
3. Make sure the padlock is unlocked (bottom left) with your admin password
4. Choose 'Automatic' next to 'Location' at the top.
5. Choose 'Edit Locations'
6. Then click the + button, and create a new one called home/test/somethingorother
7. Click Done -> Save and wait a few seconds
8. You may have to reconnect to your Wi Fi network etc.
If you have a USB modem, the above steps will most likely remove its config from the Network preferences. As I said, its reversable (just change location back to automatic)
Have fun -
While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, PyxidisI have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age. -
I am getting this error message when trying to burn a DVD: The disc can’t be burned, because the device failed to calibrate the laser power level for this media. iMac, Mac OS X 10.6.8 Memorex DVD-R 12x Any ideas?
First, try a different batch of recordable DVDs. If you still have problems, you may want to make an appointment at the genius bar and have it checked. The drive may be failing.
-
There is precious little information concerning this warning dialog. If I am disconnected from any network; wifi, Bluetooth, Thunderbolt Ethernet, doesn't matter, I get this error in a pop-up dialog. "Your connection failed because the communication device is unavailable. Make sure it's connected to your computer and try reconnecting" Creating a new Location under System Preferences / Network does not solve the problem. 1. What is asking to be connected? 2. How do I stop this? Running Yosemite 10.10.2 on a MBP 13"
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
I have a mac book pro OSX 10.7.5 I am getting this message when trying to burn a cd: The disc can’t be burned, because the device failed to calibrate the laser power level for this media.
Look here:
Burner - device failed to calibrate the laser power level for this media.
Maybe you are looking for
-
I have two adobe accounts and I want to synchronize them.
I have two adobe accounts: one for work and one for home. I want to synchronize them so I can download the cloud on my work computer.
-
I have a brand new Mac and it did not come with iDVD. What gives?
Is iDVD supposed to come on new equipment? It's not on the app store and iMovie tells me I need it in order to burn a DVD.
-
PC server not showing up in Finder under shared
Hi I installed Leopard on the 26th and my home windows PC is not showing up under shared and its not showing up in the network folder under mshome like it did in tiger. ive checked the PC and file sharing is enabled in the firewall and i even install
-
IMessage is not working on my phone. Is this a system issue or individual phone issue?
My iPhone 4S is not allowing me to send any iMessages. It will say "not delivered" and send as a text. Is this an individual phone issue or system issue? I checked my settings and they are all correct.
-
Hi, been using Indesign software for a couple of years now, migrated from Quark. Does anyone know of any third party plugin for fancy borders. Indesign ones are a little basic. I know you can manipulate them in corner effects, but I'm after something