An internal Audigy card for Laptops

Hello everybody in the room(s)!
I?d just was wondering whether an internal soundblaster Audigy card for laptop has been released or not yet (a really internal one, not that for the PMCIA port). I own an almost-new Dell laptop. Do anybody knows something in this respect?
Thanks everyone!
Luneros

Thanks, I took the plunge and got one of those cards. It installed fine - not sure which way to connect the two antennae - but have tried both ways (main and aux - black and white cables???)
The drivers have installed fine and the OS works with the provided utilities but I have not been able to get a wireless signal yet. There are several wireless networks where I live as I used to be able to see them on my old iBook, but I can see none with this machine. Sadly I sold the iBook so have nothing else to check if the base station(s) are live.
I did have SSID broadcast disable, so I set it in the clear but it is still nto showing up.
Apart from the wireless on/off button at the side, is there anything else I could have overlooked? - I noticed fn+F8 has a wireless icon on the key but it appears to have no effect?
Thanks for any suggestions.

Similar Messages

Best draft n card for laptop to use with ae?

Has anyone got any recommendations on a draft n card for my laptop?
thanks again
2608.jmcg

Has anyone got any recommendations on a draft n card for my laptop?
thanks again
2608.jmcg

Raid or internal sata card for my mac?

Hi People,
I have some problems with my internal sata ports and therefore I'm thinking about buying either a raid card (I want to run my two internal harddrives in raid0 so doing it hardware would not be a bad idea) or just a simple internal sata card. But I can't seam to find any products like that except for the raid card apple wants like 1400$ for which is way overkill for this little hack. This can be done for something like 80$ on PC, isen't it possible to get something for my powermac g5 quad that will work?
Thank you in advance.

Hi-
Replied to your other post. Check out the Firmtek line (PCI Express) at OWC (will ship worldwide):
http://eshop.macsales.com/Search/Search.cfm?Criteria=SATA%20High%2DSpeed%20Contr oller%20Mac%20Cards&sort=a
For RAID, this Highpoint would set you up right:
http://eshop.macsales.com/item/Highpoint%20Technologies/RRAID2310/

Capture card for laptop

I'm wondering what capture cards people have gotten to work with either Mac or PC laptops and Flash media encoder. SDI + HDMI + Analog in woul be nice but any two would work.
Thanks
Philip

Black Magic Design (www.blackmagic-design.com) make a USB3 capture card that will capture SD and HDMI inputs. The other option I know of is the epiphan range of DVI framegrabbers - they have a DVI2USB option. Howver I have heard reports that the epiphans don't necessarily capture great quality but have been unable to test this myself. The epiphan devices cost about 4x the black magic devices.
If you have a very recent Mac model that has the new thunderbolt interface then Black Magic also have a thunderbolt version of the Intensity capture device. If I had money for a new laptop and a new cap device, I would be getting a MacBook Pro and thunderbolt intensity card.

Sound Card for laptops?

Hi. Sorry if this question has been asked before, I cannot find it. I have an Acer aspire 5570-2997, 1.73 ghz, 2GB DDR2, 160 GB HDD, intel graphics media accelerator 950, windows vista 32 bit home premium. I use my laptop to record music, and am wondering how I can upgrade my sound card. I know for a desktop you just pull the old sound card and put a new one in. How do these work on laptops? How much do they cost? Are they worth the $? Again, I'm sorry if this is a stupid question and the answer is easy to find, I cannot seem to find it. Thanks for you help, Billy.

Youll like this one for sure:
Creative Labs Sound Blaster X-Fi Surround 5.1 External USB Sound Card
Model: SB1090 | SKU: 8953705
Its on the Best Buy website for $59.99
It hooks in via USB.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Iphone as a broadband wireless card for laptop

I'm interested to find out if we Iphone owners will be able to use it as a broadband device here we can't get Wi-Fi on our Laptops?

Well I kept researching and found out theres something called teathering but it looks like you have to hack my phone. It looks like someone could write an app. and post it. After all theres lots of funtionality and game apps. out there for the iphone, http://cre.ations.net/blog/post/tether-your-iphone

SATA Card for G5 Dual 1.8Ghz

I'm looking for an internal SATA card for my PowerMac G5 Dual 1.8Ghz. I've got a couple hard drives laying around that I wanted to RAID together with my Time Machine Backup drive. Instead of spending hours looking on Google, I figured I'd poll the masses.
Newegg.com has a ton but I want to make sure I get one that is compatible with my hardware.
Thanks in advance!

The only sure thing is the Firmtek Seritek cards.
They are also the only ones that support boot to the connected drives.
Native OS X support is also an important point.
Firmtek also provides excellent tech support
After that, Highpoint has compatibles, and non compatibles.
They don't support boot, and, but can perform well enough.
If you take the path less taken, and get a card that uses generic Silicon Images drivers, then OS X support, and successful use, is highly variable (to say the least).

PCMCIA firewire card for G4 laptop (follow-up to excessive timecode breaks)

1.) It was recommended that I get a new firewire bus to resolve excessive timecode breaks when importing from a Canon camcorder to an external hard drive. I've been reading through posts on this topic...and saw getting a new firewire port mentioned a few times... How come when I called Apple to check on the cost of a new firewire card for my laptop Powerbook G4, I was told that nothing could be added without replacing the entire logic board? Am I missing something? I didn't say "PCMCIA firewire drive" - is that something special? Any idea of the cost to purchase and install?
2.) Apple recommended just capturing to my internal hard drive, and transfering the projects. Apart from this being cumbersome... I need a little verification: if I transfer PROJECT X to my external hard drive, then do I also need to transfer my Audio Render, Autosave,Capture Scratch, Render, Thumbnail, and Waveform folders? [I realize this is basic, but I'm wary of losing the information the project needs and getting it all messed up]
Powerbook G4, Mac OS X (10.3.9) FCP 4.5, LaCie external HD
Powerbook G4, Mac OS X (10.3.9) FCP 4.5, LaCie external HD

http://www.bhphotovideo.com/bnh/controller/home?A=details&kw=BEAFWT2&is=REG&Q=&O =productlist&sku=304014
pcmcia is an card slot. If you have a 12" PB you may not have one.
If you have a pcmcia slot, buy the card. Slide the card into your computer and start up. Put the camcorder on the card and your fw drive on the port built-in to your computer. Even if this does not solve the timecode issues, it will save you other headaches in the future.
Question. Does capturing to your internal drive solve the timecode issues you are having?
I disagree with the advice of capturing to your internal drive and transfering the project after the fact. There are a bunch of reasons why, and all of them are qualified, so I hesitate to go further until I know whether or not capturing to the internal drive is making your timecode headaches go away.
I suspect capturing to the internal drive will not help the timecode issues which will make the whole point moot. But hopefully I'm wrong :>
Tom
ps
When you talk to representatives from Apple, you have to be conscious that if they are not specialists in the area you are focused on their advice may be based on general recommendations from an IT or home user perspective. There is a difference between talking to a sales person on the floor of the Apple Store and someone from the Genius Bar. And the person at the Genius Bar may have a tremendous background in network installations, but never have opened FCP. Or you might get lucky and get a FCP savvy genius, who would be a bit weak when talking about some other area.
This is not a knock, just a reality. It is difficult to be deeply conversant with even one area. It is not realistic for the generalists you usually deal with to know the best answers to very specific questions.
I'm working toward becoming a certified trainer with FCP and it is not easy or cheap to become an expert at this one application, never mind all the possible applications and hardware combinations for wildly different needs and budgets.

[SOLVED]Laptop Internal SD card reader no longer working

Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues. Today I decided to load up a XBMC distro to a new SD card, but my internal card reader doesn't seem to autodetect or mount my new card. I tried inserting my other card with Arch ARM that I know is a good card, but it no longer works with that card either. Here are all my logs that I could think of to post for any advice:
uname -r
3.9.8-1-ARCH
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
lsusb
Bus 001 Device 002: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
|-sda1 8:1 0 9.3G 0 part /
|-sda2 8:2 0 63.3G 0 part /home
`-sda3 8:3 0 1.9G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes, 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000f2f32
Device Boot Start End Blocks Id System
/dev/sda1 * 63 19535039 9767488+ 83 Linux
/dev/sda2 19535040 152296199 66380580 83 Linux
/dev/sda3 152296200 156301487 2002644 83 Linux
dmesg | tail
[17198.557922] mmc0: new SDHC card at address aaaa
[17535.391900] mmc0: card aaaa removed
[17537.984043] mmc1: new SDHC card at address aaaa
[18198.208331] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[18199.855227] mmc1: card aaaa removed
[18221.345032] usb 4-1: USB disconnect, device number 3
[18473.771242] mmc1: new SDHC card at address aaaa
[20787.874847] mmc1: card aaaa removed
[21102.784624] mmc1: new high speed SDHC card at address e624
[21119.691467] mmc1: card e624 removed
It seems I have all the necessary information, but I am not sure where to go from here. It's obvious my laptop is detecting the card being inserted and removed, but the card reader is never listed in /dev so I can't mount it. It's listed under lspci but not under lsusb. I'm assuming that it was two weeks ago and that's why it worked, but I'm not sure how to get lsusb to detect it so it will work again. Thanks for any help you guys have.
Last edited by coolcashews (2013-07-06 00:32:55)

Thanks for your quick reply. Here are the logs you asked for:
lsmod | grep mm
mmc_core 94486 2 sdhci,sdhci_pci
usb_common 954 1 usbcore
pacman -Qi linux
Name : linux
Version : 3.9.9-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.9.9
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65511.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Wed Jul 3 16:00:01 2013
Install Date : Fri Jul 5 11:31:57 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

How do I connect my laptop to my Linksys wireless router through the internal wireless card?

I just purchased a gateway laptop and was trying to hook my Linksys wireless router up to it. Ive gotten it hooked up but only through the secondary device (that catches the signal)... I was wondering if there is anyway that I could make my internal wireless internet card a point or no? Can I only connect it to the USB network adapter or is there really a way to go COMPLETELY wireless? Thank you for your time...

Is your internal wireless card enabled? Go to device manager and make sure it is enabled.
Chuck

What steps do I need to take once Verizon unlocks my sim card for international use on another carrier

Hi, I am traveling to Romania in a few days. I called Verizon Global Support and had them unlocked my sim card for the 4s.
They told me there was some steps I had to take after they unlocked it and I will find these steps on the Apple website.
Well I cant find what they are talking about and my search on the internet is not giving what I want.
I see things about Sprint 4s and that u must connect your phone to Itunes to complete the unlock process is this the same for verizon ?
The Verizon Rep told me I will be able to use a Internation Sim but I had to connect my phone to a computer after replacing the International sim and go threw a whole process of Restoring and resetting my phone threw Itunes. Is there true ? I dont not have a internation sim with me is there any other way to see if its unlock and how the process is ? Do i need to set my phone to only run on GSM when I get there or will the International sim automatically switch the band ?
I know its alot of question all at once but i just want to get to the point.
Thanks any help will be appericated

This is the only thing I could find but it does not answer my question or even what I was told by the Global Support Rep.
Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
1. Meet the following requirements:
* Must be a Verizon Wireless customer.
* The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
* The line of service must be active at least 60 days.
* The line of service must be in good standing for the past 60 days.
* Only one SIM Unlock per line every 10 months.
If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
5. Enjoy your new unlocked iPhone 4S!

Help me choose a good Graphic Card for my Laptop

Hello guys, first let me say I'm glad I've found this forum, It's been some time that I wanted to decide and buy a new graphic card for my laptop, but I guess this is the time and I'll start by asking for some help from you.
My laptop is HP Pavilion g6, the specs are the following (using CPU-z)
CPU: http://prntscr.com/5fqo9f
Caches: http://prntscr.com/5fqohx
Mainboard: http://prntscr.com/5fqomk
RAM: http://prntscr.com/5fqos4
SPD: http://prntscr.com/5fqoxh
Graphics: http://prntscr.com/5fqp1b
I wanted to ask you what kind of graphic card would suit my laptop, and which one do you recommend me buy?
I would to play all the latest games... I believe I need another 4GB of RAM memory, and I believe my CPU is good enough, what do you say guys?
Thank you!
This question was solved.
View Solution.

Hi,
What is the model/product of your laptop ? Generally speaking: we can't upgrade video card for nearly all laptops.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have an imac with internal airport on for ipad and iphone use how do i get my HP laptop to use internet thru the macs airport

I have an imac with internal airport on for my ipad and iphone to have wifi internet connection thru dsl ethernet wired modem , How do iget a HP laptop to use airport connection

Hi..
Try this thread > https://discussions.apple.com/thread/3285582

3rd Party SATA raid cards for internal drives?

All --
Apart from the discussion as to if RAID actually benefits a home desktop system, I am wondering if anyone has the lowdown on using 3rd party SATA raid cards to support the INTERNAL hard drives on the Mac Pro series?
My Mac Pro is still slated to be built at Apple and for now I have the minimum memory and HD spec being requested at Apple, with the plan to upgrade the memory and drives from OWC or another vendor.
I've toyed with the idea of utilizing Disk Utility's software RAID features (e.g. RAID 0 for scratch disks, RAID 1 for boot, RAID 0+1 for all else.) I've also toyed with the notion of searching for a hardware raid solution which would allow me to transfer the internal SATA cable runs from the motherboard to a host adapter card for an internal multi-channel experience (with options to create and break mirrors to external devices for backup purposes.)
So....
Has anyone experience or utilized 3rd party hardware raid controllers which can connect to the internal HD bays? Are there limitations to this (ie, does the boot drive HAVE to reside off the internal motherboard controllers, or can an internal hardware controller successfully boot the system) of which ought be noted?
Finally, in the event that a host adapter card cannot drive the interna bays, can anyone give feedback to hardware SATA cards to power external drive bays with support for Disk Utility (to allow RAID1 pairings of internal drives to external snapshot-backup drives)?
Thanks for your time,
Ian Poulin
Richmond, Va

I am wondering if anyone has the lowdown on using 3rd party SATA raid cards to support the INTERNAL hard drives on the Mac Pro series?
There are many 3rd party controllers that support the internal HDs if an internal iPass connector is used. The problem is that some are bootable but most are not.
The Areca ARC-1680ix-12 and the HighPoint RocketRAID 4320 are bootable. However, the system cannot be installed via the Apple DVD. Instead the user needs to clone a boot drive with the proper drivers to the boot volume on the controller and then boot from the 3rd party controller.
The other issue I found is that these controllers do not support Boot Camp. If Boot Camp is desired, my recommendation would be to leave the internal HDs on the Mac Pro internal bus intact and use the 3rd party controller for external storage. This method provides four internal bays that are bootable, support Boot Camp and can be used for system backups. I use the 3rd party controller for external storage for large RAID sets and hot swapping hard disks.
With the internal bays intact and external hot swap RAID storage available the user can support Boot Camp, multiple system volumes and large external RAID sets. From my experience using a 3rd party controller with the internal HD bays always has some limitations. The user usually does not realize it unit later when Boot Camp does not work or the computer fails on a system upgrade or the controller does not work at all with a new version of Mac OS X.
Staying with the standard internal Mac Pro bay configuration will be the best configuration to avoid compatibility issues with future versions of Mac OS X. It is rumored that the new Snow Leopard may require 64-bit drivers. If that is the case, I would expect most if not all existing 3rd party controller drivers to fail. Some drivers will be upgraded after a few months while others may not. Having the internal Mac Pro SATA controller intact should at least allow the Mac Pro to boot if my guess about compatibility issues is correct.
can anyone give feedback to hardware SATA cards to power external drive bays with support for Disk Utility (to allow RAID1 pairings of internal drives to external snapshot-backup drives)?
There are a large number of external controllers that work with Disk Utility. Here are some of my favorites.
1. FirmTek SeriTek/2SE2-E and the SeriTek/5PM
http://firmtek.stores.yahoo.net/sata5pm2se2.html
http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/5pm/
2. Sonnet Tempo E4P
http://www.amug.org/amug-web/html/amug/reviews/articles/sonnet/mac-pro/
3. DAT Optic eSATA_PCIe8
http://www.amug.org/amug-web/html/amug/reviews/articles/datoptic/pcie8/
Have fun!

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
http://fastmac.com/bluetooth.php
In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

An internal Audigy card for Laptops

Similar Messages

Maybe you are looking for