An internal error occurred while writing imported graphics in this document. The file has been saved

An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
How do i fix this, there are no images in the document
thanks
emma

We are running FM version 7.2b144 on MS Win xp Pro (32 bit), and I did not notice this until service pack 3 was installed. I believe I have found a work around to the situation and another contributing cause. If graphic files are placed directly in an anchored frame instead of importing by reference, the file somehow becomes misplaced. If you right click the graphic and open the Object Properties dialog box, and see the phrase "no referenced file" below Main Editor: Referenced File: in the lower left hand corner, this has happened. I found if I removed all graphics files without references and imported them by reference, the source file may then be properly saved. I am also using a program called CCleaner, which removes cookies, temp files, browsing history and the like from a system. If the program settings are chosen too aggressively, and the application runs when FM has a file open, this same error will occur, even if all files are referenced properly. I don't know if SP3 has some similar application which is now running in the background and causing this.
To summarize, if you want to retain SP3, I have eliminated this error by confirming the links to referenced graphics files and avoiding using 3rd party "cleaners" while FM is open.

Similar Messages

  • Internal error occured when writing

    Hi all
    I successfully imported an APO planning area into the quality systems, however the same request ends with error 12 in the production system. Landscape is SCM 5.0 sp8 with BI 7.0 sp12. When i checked the import job RDDEXECL (user DDIC), it shows:
    Date Time Message text Message class Message no. Message type
    07/08/2007 00:02:57 Job started 00 516 S
    07/08/2007 00:02:57 Step 001 started (program RDDEXECL, variant , user ID DDIC) 00 550 S
    07/08/2007 00:02:57 All DB buffers of application server <server_name> were synchronized PU 170 S
    07/08/2007 00:03:17 <b>Internal error occurred when writing</b> D0 054 E
    07/08/2007 00:03:17 Job cancelled after system exception ERROR_MESSAGE 00 564 A
    I thought there will be an ABAP dump, I found this internal error (in bold in the log above). I tried searching for info on this but no help, it does not says error writing to what? Please help.
    Thanks
    Ali

    It seems a syncronization problem..
    You can create a customer message providing the following information:
    1. The symptoms that occurred
    2. The highest Support Package
    3. The current SAP_BASIS Support Package level
    4. The queue that is currently selected
    Header Data

  • Internal Error occurred while calling the ProcessDPCommands API

    We have installed Business Objects XI  with MySQL. We are getting following error when we click on view query on the WEBI Reports
    " Internal Error occurred while calling the ProcessDPCommands API  Error WIS 30270".
    When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
    Please hep to fix this problem
    Installation is on Solaris 10
    Edited by: AshishDatar on Nov 6, 2009 3:00 PM
    Installation is on Solaris 10

    did you check whether universe connection is pointing to the correct db?The following url might be helpful:
    [http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

  • A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

    Need help.  I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client.  It just prompts for password but will not
    take it. I'm sseeing this on my front end server multiple times:
    A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
    Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
    All my certs are good coming from internal CA.  My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers.  Issue only occurs when trying to connect using a lync 2013 client.
    1 Login: FAIL (hr = 0x1) 
    this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
    1.1 Get-NewWebTicket: FAIL (hr = 0x1) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
    1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
    1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    Rich

    Hi,
    Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
    For the detailed IIS configuration, please check:
    http://technet.microsoft.com/en-us/library/gg412871.aspx
    As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
    lyncdiscoverinternal.<sipdomain> Host (A) record and then
    lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
    More details:
    http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • An internal error occurred while calling 'submitReport' API. (Error: ERR_WI

    An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
    We get above mentioned error message at any point in WebI Rich Client.
    DataSource: Teradata 12.0 (Local machine)
    BO XI 3.1 Client installed on local machine
    Universe (Secured connection)
    WebI : desiging and creating in Standlone mode
    WebI client version : 12.1.0.882
    Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
    Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
    Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
    1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
    2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
    3) Draging out the mesaure or dimension from report (only 2nd error)
    Report is simple and no other stuff except the cross tab table
    Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
    What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.

    You can have a look here:
    Input Controls with Break Error on webi report
    http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
    Re: internal error occurred while calling the 'submitReport' API.
    I'm Back
    HAPPY NEW YEAR

  • ORA-00607: Internal error occurred while making a change to a data block

    hi
    i hv use testing purpose oracle 10 Xe in unix
    but when today i hv connect database following error occured
    SQL> startup
    ORACLE instance started.
    Total System Global Area 83886080 bytes
    Fixed Size 1257284 bytes
    Variable Size 75497660 bytes
    Database Buffers 4194304 bytes
    Redo Buffers 2936832 bytes
    Database mounted.
    ORA-00607: Internal error occurred while making a change to a data block
    ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
    I hv check alert log , but no proper solution is given , how can start database

    Duh, and of course I missed the significance of
    oracle 10 Xe in unix
    XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
    Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
    Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
    Good luck, APC

  • An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)

    Hi ALL,
    I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
    The error message scrnshot:
    This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
    Recently we had upgrade of BO 4.0 SP7 patch 9.
    The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
    Would be thankful for any help recieved in resolving the above issue.
    Regards,
    Jaywant Kulkarni.

    Hi jaywant,
    Please check the note: 1760827 it may be helpful
    ( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
    Scenario 1:
    Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
    Suggested Solution:
    Modify problematic report in Webi. 
    Change the prompt definition to be a constant, run the report in Webi, and save it. 
    Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it. 
    Re-open the report in InfoView and refresh.
    Scenario 2:  Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
    Suggested Solution:
    Remove the merged dimensions and then re-establish them.
    Scenario 3:  Error occurs when the InfoView report has been open and idle for a long time.
    Suggested Solution:
    This error can be an indication of a time-out, based on the server’s settings.  Make sure you save your work often.  You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.

  • A fatal error occurred while creating an SSL client credential. The internal error state is 10013.

    Hi All
    I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
    Log Name:      System
    Source:        Schannel
    Date:          10/04/2015 9:21:17 AM
    Event ID:      36871
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:     
    Description:
    A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
    I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
    All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers 
    Any suggestions on where to look?
    Thanks

    Hi,
    According to the event log, the issue is related to Schannel instead of Exchange.
    Please try the following steps:
    1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
    2.In Local Security Settings, expand Local Policies, and then click Security Options.
    3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
    4. Ran gpupdate /force
    If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
    Here is a similar thread for your reference:
    https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • Error occured while writing cube data

    Hi all,
    I was working around with the manage ownership section. When i tried to change [PCON] or [POWN] values and save it, I get an error message saying "Error occurred while writing cube data". After doing some googling I found out that this was because [PCON] and [POWN] are system accounts and hence we cannot submit data to it.
    Is there any way how I can resolve this issue? I have 2-3 entities which have minority and do not have 100% ownership/consolidation. Please help me out in this matter.
    Regards,
    Ramith

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • Error occurred while writing cube data - PCon

    Hi,
    Could you help me? I have created new application, but when I try to enter and save PCon values, I get a message: "Error occurred while writing cube data.". What could be the reason? I was able to update other data forms.
    Thank you in advance

    It should work, check if this helps. Page 133 http://docs.oracle.com/cd/E12825_01/epm.111/hfm_user.pdf

  • API5317: Error occured while writing to archive file

    We have been making daily archives for weeks and then one morning started getting this error:
    API5317: Error occured while writing to archive file f:\OWB\Archives\Daily\backups\Friday\projects\erm_phase1\project.mdl
    We have checked space on the disc, and running the archive from different PCs. Is possible that there is a limit on the archive file? The archive file is in the order of 21M. I am worried about the upgrade to the new version if we cannot make archives. Any suggestions?

    Marlene,
    Which OWB version are you using and what is the database version?
    Regards:
    Igor

  • 2 error msgs while synching to I-pod touch.  "An error occurred while writing to the device.  Also, I-pod cann be synced, required disk cannot be found.

    Two error messages appear while trying to synch to I-pod touch.  "I-pod cannot be synced.  An error occurred while writing to the device."  Second msg:  I-pod cannot be synced, required disk cannot be found." 

    The latter error can usually be resolved by deleting the iPod Photo Cache folder.  See the following for its location.
    iTunes: Photo sync creates iPod Photo Cache folder
    For the former error, I would try again.  Then I would reset the iPod and try again.
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next I would restore the iPod.

  • An internal error occured while calling 'getBlob' API. (error: ERR_WIS_3027

    Hi Team,
    Please help me in resolving the below error message.
    One of my user is experiencing this when trying to run a report.
    "An internal error occured while calling u2018getBlobu2019 API. (error: ERR_WIS_30270)". I have checked the previous discussion on the same, But I could not get it. Could some one help me as what I can do to resolve this.
    Thanks in Advance
    Mmvihar

    Hi George Pertea,
    Appreciate your prompt response.
    I found a simple solution for this.
    This error message occurs when the TOMCAT server memory exceeds more than 1.3 gb. Hence, restart the TOMCAT server would resolve this issue.
    Here are the steps in detail.
    1. Log into each server through either citrix, remote desktop or mstsc from run command.
    2. Click on task Manager.
    3. Click on process, if you find TOMCAT memory is more than 1.3 gb, come back to CCM and stop tomcat server.
    4. Wait for 20 seconds and then start tomcat server. Check all the remaining servers and do the same
    This resolved the issue.
    Thanks & Regards
    Mmvihar

  • "An internal error occured while calling 'answerPrompts' API.(Error: wis_30

    Hi Gurus
    Getting an error message while running a webi report from infoview link(server:8080/InfoViewApp/logon.jsp)
    as
    "An internal error occured while calling 'answerPrompts' API.(Error: ERR_WIS_30270)
    I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
    If it is unchecked it is running without any error.
    while running report from webirichclient(where we are developing reports) it is running without any error.
    Thanks in Advance
    Regards
    Ritu Raj

    It seems you are on SP3, and I assume the operating system of the BO server is Windows based.
    Please cross-check that the Excel version you have matches the ODBC driver in the supported platforms document for XI3.1 SP3 [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25]
    Second thing, I would like to see screenshots of what you mean by
    "I found that while selecting refresh checkbox in one of the query which is using .xls file from the local system this is showing above error while running from above link.
    If it is unchecked it is running without any error."
    just to avoid misunderstandings from my side
    Thanks!
    Best regards,
    Simone

  • An internal error occured while calling 'getBlob' API.(Error: ERR_WIS_30270

    Hi,
    I am using BOXI R3.1, when i open a Webi Report & getting one Error:
    An internal error occured while calling 'getBlob' API. (Error: ERR_WIS_30270).
    Do anyone know how to fix error?
    Regards,

    Hi,
    this is an old thread..
    There are a great many potential reasons for this problem.
    I would recommend you use  our Knowledge Base search on SMP - link here:  http://service.sap.com/xsearch
    .. and search for terms :  webi 'getBlob' API
    Also, some information about your Product version and Patch level is requiered.
    Also, any explanation of workflow -  
    does it only happen when opening report? 
    are you using OpenDoc  hyperlink  navigation? 
    Moving between report tabs?   
    Are many Schedules running concurrently at that time ?
    regards,
    H

Maybe you are looking for