An internal error was encountered in the extensible spatial index

HiAll,
Ran a query on
CREATE TABLE results1 NOLOGGING AS
SELECT a.rowid1 poly_rowid, a.rowid2 point_rowid
FROM TABLE (SDO_JOIN ('PARCEL', 'GEOMETRY', 'ND_TABLE', 'GEOMETRY')) a;
Thsi query ran for 20 hours! and came up with this error An internal error was encountered in the extensible spatial index.
But when you just run teh select statement the results come in seconds...
I am running on 11GR2 and this query was ran on Sql Developer.
Any help is much appreciated.
Edited by: CrackerJack on Mar 31, 2013 2:50 AM

How fast for the following queries?
insert into results1 SELECT a.rowid1 poly_rowid, a.rowid2 point_rowid
FROM TABLE (SDO_JOIN ('PARCEL', 'GEOMETRY', 'ND_TABLE', 'GEOMETRY')) a;
insert /*+ append */ into results1 SELECT a.rowid1 poly_rowid, a.rowid2 point_rowid
FROM TABLE (SDO_JOIN ('PARCEL', 'GEOMETRY', 'ND_TABLE', 'GEOMETRY')) a;

Similar Messages

  • An error was encountered performing the requested operation:

    I frequently get this error while I initially open a connection and click on a table:
    An error was encountered performing the requested operation:
    Stream has already been closed
    Vendor code 17027
    I cannot see the columns information and have to refresh. After this error, if I switch to Data tab from the default Columns tab, I usually get another error that says:
    Connection is currently busy. Try again?
    [Try Again] [Abort]
    I never had these errors using Toad for Oracle tool.
    My environment:
    Windows 7 64-bit with 16G RAM
    Oracle Database 11g R2
    Edited by: 恩承四季 on Jan 28, 2013 1:27 AM
    Edited by: 恩承四季 on Jan 28, 2013 1:27 AM

    Hi,
    Vendor code 17027Searching the forum for that issue only yields hits for prior SQL Developer releases. Be aware that the release shipped with DB 11g is rather out-of-date so, if you haven't already downloaded and installed the latest release (3.2.20.09.87), I would recommend upgrading. Easiest is to select the 32-bit version with JDK included.
    Regards,
    Gary

  • An error was encountered by the CAS Security Provider:   Error Code: SVR_ER

    Hi Everybody,
    when i open dimension library that time i get a error
    An error was encountered by the CAS Security Provider:
    Error Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR
    How i can resolve i donot know ,pleas any body know help me.
    Regards,
    Ashis

    I ran into the same problem. It appears to be an "undocumented feature"; however, there is a patch that is supposed to resolve the issue. The link to the patch is here:
    https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=9921096
    See the following for more details:
    Workspace: An error was encountered by the CAS Security Provider: Not SpecifiedError Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR [ID 1265746.1]
    Modified 22-NOV-2010 Type PROBLEM Status PUBLISHED
    In this Document
    Symptoms
    Cause
    Solution
    References
    Applies to:
    Hyperion Planning - Version: 11.1.2.0.00 and later [Release: 11.1 and later ]
    Information in this document applies to any platform.
    Symptoms
    When trying to access BPMA via the Workspace, Active Directory users get the following error:An error was encountered by the CAS Security Provider: Not SpecifiedError Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR.
    Cause
    This behaviour is described in unpublished bug 9921096
    When MSAD is configured as an external directory there is an option to enable or disable support for external groups. If Support Groups is disabled this triggers a code bug which leads to the observed behaviour on navigating to the Dimension Library.
    Solution
    As a workaround you can enable Support Groups.
    If you want to be able to disable Support Groups you must apply patch 9921096.
    References
    Related
    Products
    •Middleware > Enterprise Performance Management > Planning > Hyperion Planning
    Hope this resolves your problem!
    Jennifer

  • An error was encountered performing the requested operation:  Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor    Vendor code 12505

    From sql developer I am trying to connect to database in my local machine. It shows the following below error. Any suggestions?
    An error was encountered performing the requested operation:
    Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    Vendor code 12505

    lsnrctl results are as shown below
    C:\Users\ndodd_000>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:40
    :25
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date                18-AUG-2013 15:29:41
    Uptime                    0 days 2 hr. 10 min. 50 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\app\ndodd_000\product\11.2.0\dbhome_1\network\admin
    \listener.ora
    Listener Log File         c:\app\ndodd_000\diag\tnslsnr\Vamsi\listener\alert\log
    .xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "sysdba" has 1 instance(s).
      Instance "sysdba", status READY, has 1 handler(s) for this service...
    Service "sysdbaXDB" has 1 instance(s).
      Instance "sysdba", status READY, has 1 handler(s) for this service...
    The command completed successfully
    lsnrctl service results
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:
    :20
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:0 refused:0
             LOCAL SERVER
    Service "sysdba" has 1 instance(s).
      Instance "sysdba", status READY, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:186 refused:0 state:ready
             LOCAL SERVER
    Service "sysdbaXDB" has 1 instance(s).
      Instance "sysdba", status READY, has 1 handler(s) for this service...
        Handler(s):
          "D000" established:0 refused:0 current:0 max:1022 state:ready
             DISPATCHER <machine: VAMSI, pid: 904>
             (ADDRESS=(PROTOCOL=tcp)(HOST=Vamsi)(PORT=49237))
    The command completed successfully

  • An internal error was found in the SAP lock management system when opening

    Hello SDN Experts ,
    When i am trying to open any t-ocde in my productive system
    it is displaying an error message "An internal error was found in the SAP lock management system " , not only for me but also for all the users .
    Could please tell me what colud be the problem and solution for this??
    it's very urgent .....
    Thanks in Advance !
    Siva reddy

    Hi,
    Check in SM12 if tht particular Tcode is being locked by some other person.
    Else contact your basis team. There may be some auth issues.
    Regards,
    Lalit

  • How do I find out what the internal error was?

    I got a fatal internal error when I pressed the "Show Errors" button under Windows->Show Errors menu option.
    Silly me, I didn't write it down. When I relaunched LabView, it offered to go and try to diagnose the error,
    but not I can't find any trace of what the error actually was! Obviously, I should have written it down,
    but why didn't Labview also record the error?

    Hi Doughera!
    When you say: "When I relaunched LabView, it offered to go and try to diagnose the error", do you mean that LabVIEW gave you the option of Investigate Now, Investigate Later, & Do Not Investigate? Assuming this is what you are referring to, by choosing either Investigate Now or Investigate Later, LabVIEW will generate an error log .txt file. This file is automatically placed in your My Documents\LabVIEW Data\lvfailurelog folder.
    Hope this helps!
    Travis H.
    National Instruments
    Travis H.
    LabVIEW R&D
    National Instruments

  • Error message while opening a project: "an error was encountered while loading the image"

    We've run into a new error message here today:
    an error was encountered while loading the image
    It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
    It's on a windows 7-machine.
    Anyone encountered it and knows what it means?
    is the project lost forever?

    Hi there
    Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
    Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
    If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
    Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
    And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
    Best of luck to you in sorting things. You should also consider filing a Bug Report.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

    I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
    Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

    Hi,
    These blog posts might help debug problem
    Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
    daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
    Regards,
    Jari

  • New-AzureQuickVM - InternalError : The server encountered an internal error. Please retry the request

    HI, I am trying to use quickVm create in powershell as I have a need to autmate the creation. Since this monring, I am stryudggling to acheive this task. Cloud service gets created and deployed and then I get :
    OperationDescription                               OperationId                                       OperationStatus                                  --------------------                               -----------                                       ---------------                                  New-AzureQuickVM                                   2afd21d7-e246-8883-903f-5b80ef3f223d              Succeeded                                        New-AzureQuickVM : InternalError : The server encountered an internal error. Please retry the request.At line:1 char:1+ New-AzureQuickVM -Windows -ImageName $imagename -InstanceSize ExtraSmall -Locati ...+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~    + CategoryInfo          : CloseError: (:) [New-AzureQuickVM], CloudException    + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.ServiceManagement.IaaS.PersistentVMs.NewQuickVM
    I tried again, I came across another error
    New-AzureQuickVM : Service already exists, Location cannot be specified.
    According to powrshell doc, we can reuse an exisiting service name but it seems that this is not true, I needed to remove the cloud service manually in the portal, I reissued agai and again but getting always the same error
    The server encountered an internal error. Please retry the request.
    Thanks for your help

    $location="North
    Europe"
    $imagename
    ="a699494373c04fc0bc8f2bb1389d6106__Windows-Server-2012-R2-201503.01-en.us-127GB.vhd"
    New-AzureQuickVM
    -Windows-ImageName$imagename-InstanceSizeExtraSmall-Location$location-Password'myâssword'-NamesieracDevOps-ServiceName'sieracDevOpsPro'-AdminUsername'myuser'

  • BB 9900 - Activation failed. An error was encountered when sending the activation transmission

    Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi  or contact your service provider to change your service plan.  Regards,Sunil K

    sunilkesavareddy wrote:
    Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi  or contact your service provider to change your service plan.  Regards,Sunil KAre you sure you are connected to a BIS plan (BlackBerry Internet Service) ? Regular data plan will not work, ask Airtel if it's a BIS plan.

  • App-V 5: An error was encountered while trying to stop the monitoring session

    Hello,
    I have a problem with sequencing an application with the App-V 5 sequencer. During the moment that the sequencer is collecting system changes an dialog box appears with the message "An error was encountered while trying to stop the monitoring session.
    Please check the event log for more details.". When I sequence the same application with App-V 4.6 SP2 sequencer I have no problems.
    In the eventviewer (Microsoft-AppV-Sequencer/Admin) you can see the message "An attempt to stop the monitoring session failed (startIndex cannot be large than lenght of string. Parameter name: startIndex). Event Id: 5003
    I have checked the background activities, but I couldn't find anything suspicious.

    Is the only difference between the platform the sequencer is hosted on the version of the sequencer? have you tested on a vanilla deployment of Windows?
    Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
    answer your question). This can be beneficial to other community members reading the thread.
    This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
    Twitter:
    @stealthpuppy | Blog:
    stealthpuppy.com |
    The Definitive Guide to Delivering Microsoft Office with App-V

  • The server encountered an internal error. Please retry the request.

    Hi,
    I have a VM with Windows 2012 Server. It has an automation script to start the VM every day at 7 o'clock and end at 23:30.
    Point is that until yesterday it worked well but this morning didn't started. I've been trying manually but until now it have been impossible to start the VM.
    After a while I have the following error message: "The server encountered an internal error. Please retry the request."
    I don't know what else I could do to not lost the productive data in the server and start it without problem.
    Any help will be appreciated.
    Thank you in advance,
    Sergio

    Hi,
    In some cases as availability of free blades or free space within a blade in a cluster fluctuates, the constraints to find an allocation for the service may not be met. When these constraints are not satisfied, we return back an allocation failure error
    message.
    To avoid this error create multiple affinity groups to house services that are not required to be placed together, spin up smaller numbers of VM’s at a time, ensure retry logic is in place when an operation is unsuccessful and also utilize multiple datacenters
    for your deployments. 
    Try Multiple Restarts for the VM, however if the VM still does not start, please try the below steps
    Resize the Virtual Machine from the Portal but ensure to Back up the Data in the Temporary Drive ( D:\) since the data will be lost while Resizing.
    If the issue is still not fixed, please recreate the VM by retaining the attached Disk’s and attaching the same to the new VM
    Hope this helps !
    Regards,
    Sowmya

  • 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request

    When I try to go to my website, I get a blank screen and this message:
    Method Not Implemented
    GET to / not supported.
    Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
    Can anyone help me fix this bug, please? Thanks!

    I did as you said and it worked magic! I didn't even have to restart Mozilla. Thank you so much for your help! :-)

  • Error: The server encountered an internal error. Please retry the request.

    I constantly gets this error "The server encountered an internal error. Please retry the request" whenever I try to start my VMs. Sometime it takes 4 - 5 tries to start a VM. What's wrong here? any idea?
    thanks.

    In order to diagnose further we might require further more information including Subscription ID and Log Reports.
    Microsoft respects Customer Data Privacy and hence would not recommend you to share the same on public forum.
    I suggest you to try Analyzing the Operations History from the Management Portal. It helps you to view Historical Logs of all Create/Update/Delete Operations performed on all Services in Azure
    You might want to refer to the below link to know more about Operation Logs
    http://blogs.msdn.com/b/azuremobile/archive/2013/11/26/operation-logs.aspx
    Hope this helps !
    Regards,
    Sowmya

  • An internal error has occurred in the secLdap plugin - CR XI (Login to Ent)

    Hi,
    We recently changed the authentication type on BO XI R2 Enterprise from Enterprise to LDAP mode and have been able to add and configure all the LDAP groups. We know that the authentication is successful as users have been able to successfully login via the Infoview/CMC.
    However, we are facing a problem from certian workstations (for example mine) when ever we try to login to BO Enterprise via the Crystal Reports XI client thorough LDAP as it gives the error 'An internal error has occurred in the secLdap plugin'. (PS: The Enterprise Authentication mode works) From what I have understood that this error is workstation specific as the same login is successfull from another workstation.
    The CR XI client on all the workstations are of the same version (11.0.0.1282)  but the Windows Updates differs. For e.g.: I have Windows XP SP 3 (with the latest of the updates with IE 8)
    Is there any updates to CR XI Client to solve this issue or am I missing something here?

    Your client is CR R1, your server is XI R2. This is a known bug. To fix you need BOE XIR1 SP3 or above. I'm not sure this was fixed in a CR service pack. Sorry I can't find a link for that right now.
    Or use [this link|http://resources.businessobjects.com/support/additional_downloads/service_packs/crxir2.asp] to get CR R2, uninstall CR R1, and replace with CR R2. NOTE: they should still use the same license keys. If using CR to XIR2 you should always keep the same version so this is the preferred method.
    Regards,
    Tim

Maybe you are looking for

  • Purchasing Security - By User ID

    I am working on a security requirement in Purchasing.  We would like to prohibit people from changing other people's purchase orders.  I know about authorization object m_best_ekg, which allows you to have different security levels by purchasing grou

  • I cant export my photos from my mac to my ipad , bluetooth wont      se

    i cant export my photos from my mac - osx - 10.6.8 to my ipad air , bluetooth wont recognise it

  • Syncing Audio

    Hello all. I'm trying to sync an animation in Flash with a piece of music I created in Reason 4. The audio is at 120BPM and the Flash movie is currently set to 24FPS - I haven't actually created the animation yet - I've merely imported the audio into

  • OIF: How can I create the SP metadata if unable to get from SP

    Hi, I have OIF working as IDP and there is one SP but for that unable to get metadata. Is it possible just for testing purpose to create one sample SP metadata using the details of SP which is not having its own metadata. I want to do this because I

  • Re: Old iWeb to new iweb problems -please help

    1. I've been experimenting with the new iweb, and I inserted the html on the page, then I uploaded onto the internet to see what it looked like, and now I can't delete the html from the page. What should I do? 2. I took my original iweb pages and cre