An issue with the remote control

The remote control works with other programs, however its doesn't when I use it with Front row. I have paired it with the Imac(10.6.4), it also works ok with the Macbook.
Any suggestions what may be the problem and how to fix it?
Thanks in adv

No not yet, I have two Apple TV's, one was connected directly to my time Capsule in the lounge, the other was connected in the bedroom via WiFi through an Airport express that is located a few metres away.
What happened was that when I got the new replacement Apple TV I fitted this to the main TV due to the new 1080p HD facility. I then took the Apple TV that was in the lounge and working perfectly well and resited it in the bedroom.
It was then that the fault appeared again, so it either means that the fault is on the WiFi side or the HDMI lead I suppose.
The confusion came when the genius said that it wouldnt matter about the WiFi connection.
I will check with a different HDMI Lead if you think it may be that.
thank you for your help
Paul

Similar Messages

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

How can I fix the remote control order of the chapters?

I am using the new 6.0 theme of Reflection Black--submenu Chapters. THis gives you two rows of chapters (which shows the looping movies and title of the chapter). I am importing the .mov slideshows in the order I want them accessed with the remote control of the TV (or DVD Player remote), but this is not the case. Instead, when clicking the right arrow on the remote control, the next chapter is not the one laid down in order, but another chapter. (From the first chapter, it skips to the second row, then back to first row, then back to second row.) Basically, the remote does not forward to the next chapter in the order they were imported.
Can anyone help? I have been told by Applecare that the map icons cannot be reordered. But starting a new iDVD project and importing in order does not work. I tried other themes and the ones with lists work and can even reorganize the order for you if you drag and change the position of the chapter!
Thanks

There seems to be some order in some themes, but this particular one has no order. Hoping also to hear of a solution. Applecare said to reinstall iDVD if I can't fix the problem with creating a new project, but I don't think this is the issue, since other themes work.

How do you use the ATV with the remote when you place it out of sight?

I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
Thanks.

Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.

I bought a second apple tv and would like to control it with the remote app but cannot find a way to add a second device. Anyone have an idea how to do that?

I bought a second apple tv and would like to control it with the remote app but cannot find a way to add a second device. Anyone have an idea how to do that?

I'm having the same issue and would like to get some help. I set up a second Apple TV in our bedroom and wanted to be able to control it using my iPhone like I do with the Apple TV in the living room. The new Apple TV is active on the network and I've made sure the same Apple ID is used for both the Apple TV as well as the Remote App on my iPhone. I'm just wondering what I might be overlooking.

HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Welcome to the Apple Community.
To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

VPN Issue: Could not Negotiate a connection with the remote PPP server

Hello Folks,
I setup VPN on Windows Server 2003 Enterprise R2. I am successfully able to connect to VPN via laptop internally and externally. However, on my iPhone I am not able to connect and receiving the following error "Could not Negotiate a connection with the remote PPP server".
There doesnt seem to be a lot of documentation regarding this on Apple and or throughout the web.
Anyone resolve this issue?
Peace
Phil C.

I am not entirely sure my full setup. I had a friend help me set it up. Now for some reason when on WIFI on my own network I am able to connect to VPN ( I wasnt able to before), but when I switch to edge there is still no response for the PPP server. I even messed around with the PPP options still no response. Unfortunately I am not extremely server literate so my troubleshooting is limited. However it is now working via my own WIFI and will try it on another WIFI network tomorrow. I am wondering though if it connecting had to do with any updates from microsoft. Since this is a newly installed server 2003 it has been running updates. Some food for thought.
Peace
Phil

I have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

i have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

I have a Mac Book Pro 2008
I have my MBP paired with Apple TV and use it all the time
My only complaint is that when I use the Apple TV remote it sometimes turns things off and on in iTunes.
Besides all the options from Apple TV I can listen to anything on my mac over my TV surround system thru Apple TV

Control chapter marker with number keys on the remote control

hey guys,
do you know where i can set chapter marker of track so, that when i hit a number key on the remote control (e.g. 2 for chapter 2) it jumps to this marker.
thx
chris

Perhaps this will help:
Using the Apple Infrared Remote with the iPod Universal Dock

The remote control which comes with FX5600-VTDR256 is not functioning

Hi,
I just bought FX5600-VTDR256 card and installed MSI Media Center Deluxe II. Everything works fine except the remote control. It isn't working at all.
By the way, I installed the Video Adapter driver from NVidia (ver 52.13). Has it anything to do with it?

I've already checked the batteries and the IR reciever is plugged in correctly before I send this message. For the batteries, I tried swapping from my mouse. For the IR receiver, I tried plugging in the Video Input and I get the picture on the screen.
Quote
Originally posted by GlennVidia
Some things to check.
New Battery? Batteries inserted properly?
Is the IR reciever plugged in all the way?
No offense is intended at sighting the obvious but you'd be surprised
Video Drivers shouldn't affect it but I haven't the pruduct in my grubby hands to verify. I hate to recommend drvers off of the CD or from the MSI website but it's the only way to be sure. These are the only instances I would consider recommending this and I would do it myself to remove any doubt.

Solved IOS 6 issue with headphone remote

Upgraded my Iphone 4S to IOS 6 and my Klipsch headphone remot would not work. Volume buttons worked, and the center button would start playing music, but it would not stop or pause the songs. I tried my original Apple earbugs with the remote and did not have any problems. The I used the Klipsch again, and now they work great.
Sounds strange, but that is what happened.

Hi All,
I was facing all sorts of issues with my earphone controls.
This solved my problem.
Double click home button. (press twice).This will show you all the apps that you have currently open.
Long click on the 1st app in the list [about 3 seconds]. This will make the icons wiggle and show a red minus sign on the left hand top corner.
Scroll [right] to see your music app (if you can't see it already).
Press the red minus sign. This will completely close the music app.
Restart your music app and things should be back to normal. [I also would close all other app in the same fashion, just in case, cause things like youtube apps use the controls on your earphones as well. ]
In short: - kill, kill-em-all and restart your music app.

Just bought Apple TV today, have one problem, how to have the remote control the TV alone, not my mac pro ...

just bought the Apple TV today, connected with my Pioneer Elite receiver, works great with my iPhone 5, HD movie steam without any problem. but when i open my MBP, problem start surface, i try to do the home sharing, but the remote control not only control my apple tv, but control my MBP as well, so it mess up everything. please help also the Apple TV keep on resume playing music or video without permission, for example, i was trying to watch a photo slideshow, but it keeping switch back to playing the video files i last watched. any ideas?

As for the remote issue, what version of OS X are you using?
With the latest version of Mountain Lion 10.8.2 you will find the remote control setting in Preferences/Sharing/Privacy then click the Advanced button at the bottom. Check "Disable remote control infrared receiver" or pair a different Apple remote to prevent the ATV's remote from controlling the computer.

The remote controls stopped working

I bought with an official Apple dealer the new i Pod Shuffle (generation 3) to use during my bike rides. After the first ride the remote controls stopped working and the voice over feature spontaneously started repeating the songs title. As well the volume control stopped working altogether. I didn't have time to return the Shuffle after only a week so I disable the voice over feature and keep on using my Shuffle with no volume adjustment, fast forward etc ….
After a visit to the Apple website I saw that several owners complained about this problem and assumed Apple would know about it and be ready to offer a fast solution. So picked an official Service Center as close as possible from my location.
First shock the Service Center was dirty, the paint obviously several decades old and faded, the light kept to the minimum.
Second shock not Tech on duty to check something as simple as a headsets. I realized there was no way to have a fast resolution to my problem. The Shuffle will be send to a regional repair center, I could have save the trip and just go to an Apple dealer. What the use to have Service Centers if they don't provide service?
Now when a product is returned, after 25 days of ownership (can't say use), a product designed by a company with the reputation of Apple you expect some kind of sign that the company is sorry, stands behind it's product and will do all possible to solve the problem. WRONG.
Third shock. The person who took my Shuffle obviously never saw a Shuffle generation 3 before or even knew it existed. She explained over and over that I may (but it sounded more like I will) be charge for the repair. Even asked me to pay upfront a basic fee to cover the time of a Tech checking on the product. And that the Tech will give me a quote if I am to be charged. Furthermore She found tons of reasons why eventually I would be charged to repair the product, however no technical person ever checked on the product. Well I guess only users read messages on Apple website not employees of Apple.
So what now? I am suppose to receive an E-mail in 24 hours to 5 working days, in which I'll be explained the result of the Tech investigation.
I guess most owners of Apple products have a better experience with the Customer Service or where the reputation of Apple being a “cool” company comes from? But based on my experience it looks like Apple's products and Apple's Customer Service may not meet Apple's reputation or customer's expectations. Or am I asking for too much?

I seriously doubt you were at an Apple Store and you were not dealing with Apple employees. You were dealing with a 3rd party shop that does work on Apple products.
Don't know where you are located but you could contact Customer Service at Apple and complain but they are somewhat limited it dealing with a 3rd party company. But they will at least have you complaint on file. Or you could attempt to find an actual Apple Store and take your Shuffle there. Or you could try one of the workarounds listed on the threads here.

Performance issues with the Tuxedo MQ Adapter

We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?

Hi Todd,
We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
This is our configuration:
"MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
SYSTEM_ACCESS=FASTPATH
MAXGEN=1 GRACE=86400 RESTART=N
MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
SICACHEENTRIESMAX="500"
/tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
*SERVER
MINMSGLEVEL=0
MAXMSGLEVEL=0
DEFMAXMSGLEN=4096
TPESVCFAILDATA=Y
*QUEUE_MANAGER
LQMID=QMTESX01
NAME=QMTESX01
*SERVICE
NAME=txgralms0
FORMAT=MQSTR
TRAN=N
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
Thanks in advance,
Marling

An issue with the remote control

Similar Messages

Maybe you are looking for