An OpenGL error occured while attempting to load the frame (fragment shader at -1:)
I get this error when I try to load Magic Bullet Looks 1.4.1 from within AE CS5. I'm running Windows 7 x64 with an Nvidia QuadroFX 5800. - Driver version 197.03.
Anyone know what causes this? Thanks
See this page, where some of the Red Giant folks are dealing with a known conflict with Magic Bullet Looks and some graphics card drivers:
http://toolfarm.com/phorumNew5/read.php?14,13914
Even if that thread doesn't directly solve your problem, interacting on that thread is probably your best bet, since the Red Giant staff is there working on a closely related issue. I'll pay attention to that thread, too, to see if it turns out that you need anything from us.
Similar Messages
-
An error has occurred while attempting to load the Crystal Reports runtime in deployed applications
My reports use to work but now i'm getting the following error on all reports in all the applications on my server
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.Hi Willingtolearnja,
This forum is for TFS, I'd like to know whether you use TFS and your question is related to TFS. It would be better to let us know more details about your scenario if it's related to TFS. If not, you might need to open a new thread in the proper tech forum
that your project related for a better response.
However, from the error message, you might use the wrong configuration for x86/x64 mode. Please change the configuartion and try again. Check the links below for more information:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/82e23647-7116-424b-b437-df0cb2be083d/an-error-has-occurred-while-attempting-to-load-the-crystal-reports-runtime?forum=vscrystalreports
http://stackoverflow.com/questions/19286630/an-error-has-occured-while-attempting-to-load-the-crystal-reports-runtime
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
An error has occurred while attempting to load the CR in hosting
I deployed my asp.net with crystal report in hosting server...
They have installed Crystal Report Basic Runtime for Visual Studio 2008.(10.5.3700.0) on windows server 2008 OS X64..
I developed my asp.net application with visual studio 2008 in xp machione x86 now on deploying this im getting the following error on hosting server, in my local server it works fine..
The error:-
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
They have installed 10.5.3700.0 runtime on server still why this error...?You probably installed the 32 bit runtime (x86) but are running the application in 64 bit mode. I think you are using a web app, so you need to do one of two things, install the x64 version of the runtime or switch the application pool for your website to run in 32 bit mode.
-
An error has occurred while attempting to load the Crystal Reports runtime.
Server Error in '/' Application. An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly. Please install
Crystal Report is not working on webServer but It is working on local Saver
on Server i m getting this error
Message was edited by: Ludek UherIf you have your AppPool set for 32 bit then install the 32 bit runtime, if it's set for 64 bit then install the 64 bit runtime.
Try searching, lots of posts on this subject.
Don -
An error occurred while attempting to perform the operation.
Hi All,
I am getting an error while running the report:
"An error occurred while attempting to perform the operation. Then operation did not complete successfully."
Although I can see the data coming is correct, but don't know why this error is coming.
I have seen for NULL values.
How can I see the detail log to trace the error?
Please help.
Thanks,
Himanshu TiwariHi,
You can login as system using SQLPlus and use the DBMS_SYSTEM.set_sql_trace_in_session procedure to set trace on another Discoverer session. This should establish if there is any database error occuring in the Discoverer session.
Rod West -
DBD: An error occurred while trying to load the provider for transport odbo
Hello,
I am trying to create universe on top of BPC cube using 'Business Planning and Consolidation' option under SAP Business Objects in Universe Designer ; however when creating connection I am getting following error messgae
"DBD: An error occurred while trying to load the provider for transport odbo. Failed to load library . System error message: The specified module could not be found."
I am using BO 3.1
Is anyone aware of this issue? Kindly assist.
ThanksWe were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike -
An error occurred while trying to load the dvd player
I try to use a dvd control or dvd tutorial and I get:
An error occurred while trying to load the dvd player
-2147220869
(I was following
http://www.adobe.com/devnet/director/articles/flash_dvd.html
What should I try?
.VWe were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike -
Error - DBD: An error occurred while trying to load the provider for ...
Error - DBD: An error occurred while trying to load the provider for transport odbo.
Failed to load library. System error message: The specifed module could not be found.
While I am trying to create connection in universe designer to MS Analysis Services 2005.
Thank you - Ashok
Edited by: akojha on Jan 4, 2010 5:27 PMWe were having the same problem, found this note in the SAP KB
https://websmp130.sap-ag.de/sap/support/notes/1321459
Mike -
Error 1316.A network error occurred while attempting to read the file .msi
Hi to all,
this is my first post on OTN forum! anyway...
My attempt to install Essbase-ExcelAddin-11121 Fail. During the execution of Spreadsheet Add-in the process generate this issue:
Error 1316.A network error occurred while attempting to read the file ...AppData\Local\Temp\_is711B\Setup.msi
i've seen also seen that in the directory AppData\Local\Temp\_is711B\ there is no file called Setup.msi but AppData\Local\Temp\_is711B\Setup.INI
i have to modify the installer?how? anybody resolve this problem?
I checked on google but, at this moment, no results.
thanks for all support
GaetanoHello Gaetano,
It sounds like you are using Windows 7 and/or Vista.
When running the installation try to right click on the executable and select "Run as Administrator".
Regards,
John A. Booth
http://www.metavero.com -
DBD: An error occurred while trying to load the provider for transport sap.
Hi,
I just installed the BO XI 3.1 SP2 & SAP integration KIT 12.0 and could able to import all the roles from SAP client in BO CMC.But when i am trying to create new Universe & creating a connection to SAP it is throwing an error " DBD: An error occurred while trying to load the provider for transport sap.System error message:The specified module could not be found ".
I even applied FIX packs 1.7 & 1.8 for both BOXI 3.1 & SAP Integration KIT,but still throwing the same error.
Could any please help me out in this issue.
Thanks in advance,
SanjayHi,
this looks like a Bug:
Check SAP Note - 1365062
I would recommend installing SP2 for BOXI 3.1
Regards
-Seb. -
An error occurred while attempting to export the virtual machine (0x80070050)
I was exporting several VM's from a Vhost so that i could import them into a new cluster. Four out of the five machines went off with no hitch and were exported and then imported. However one of the machines throws up an error durring the export
"An error occurred while attempting to export the virtual machine.
Filed to copy file during export.
Failed to copy file from 'D:\path\of\vhd\VM.vhd to 'D:\path\of\export\VM.vhd': The file esists (0x80070050)"I have found an answer to my own question after
further investigation … In hopes of helping anyone who may have a similar problem in the future....
What happened was the server has two VHD’s one is located in C:\vm\vhd\server.vhd the second was located in a different directory such as C:\vm\vhd1\server.vhd
as both vhd files were named identically when the export was attempted it tried to move both files into the same directory I assume giving the “file already exists error”. -
An error occurred while attempting to update the database
Hi
the update from 2.82 to 2.9.0 fails for me with following message
An error occurred while attempting to update the database.
the update log ends like this
[Microsoft][ODBC SQL Server Driver][SQL Server]DELETE failed because the
following SET options have incorrect settings: 'QUOTED_IDENTIFIER'. Verify
that SET options are correct for use with indexed views and/or indexes on
computed columns and/or filtered indexes and/or query notifications and/or XML
data type methods and/or spatial index operations.
1> 2> 3> [16:56:20] RunShellCommand: Command: osql exited with code: 1
[16:56:20] RunShellCommand: Exit code indicates failure.
[16:56:20] UpdateDatabase: Failed to run database update script.
hope that anyone can solv this for meIt seems that my problem is with one of ldapservers.
When the periodic update runs.
then there will be error periodic update failed
log file mdm_error looks like this
[00:01:46] Failed running query:
IF NOT EXISTS(SELECT LDAPContainerName FROM LDAPContainers WHERE LDAPContainerName=? AND LDAPServerSAKey = ?)
BEGIN INSERT INTO LDAPContainers(LDAPContainerName, DisplayName, LDAPContainerType, ParentContainerSAKey,
LDAPServerSAKey, LDAPMemberType, AllowHandsOffEnrollment) VALUES (?,?, 2,
(SELECT LDAPContainerSAKey FROM LDAPContainers WHERE LDAPContainerName =? AND LDAPServerSAKey =?) , ?, 1, 1) END
SQLError:
I think this is the reason that the upgrade fails.
How can i solve this? -
Hello:
I have recently started getting this error when trying to Hot Sync my device:
An error occurred while attempting to initialize the Borland Database Engine (error $2108)
The device is a Symbol scanner with Palm OS v4.17. It is connected to my computer with a serial cable. The only relatively recent changes I can think of to my system are:
1. Installed a Borland software product (StarTeam) that is newer than my Palm software.
2. Installed MS Office 2007.
Please let me know if you need any more information.
Thanks!
Post relates to: NoneI would have to recommend you contact your vender where you got the scanner from. If a device got this error that we support we would hard reset the device and rename the backup folder under the username for hotsync. With this device I wouldn't know where to start.
-
"An error occurred while attempting to retrieve the KPI value from the list"
Hi all.
when I used KPI, this error occured:
An error occurred while attempting to retrieve the KPI value from the list
what happened?
any suggestion.
thanks.Hello,
Unfortunatly, I don't have the option to re-create my SP list. I have created my KPI list in the same site as the targeted list. I have made all items available in the list view, I've tried several different list views, I still get the
An error occurred while attempting to retrieve the KPI value from the list.
message.
I am at a loss here, I've search the internet high a low and haven't found any helpful info.
In MOSS 2007 I've created a list with about 24 columns. I need a KPI based on one of the columns. I've tried to creat a view with that one column, I've tried to creat a view with all columns
and make it the defualt column... I don't know what else to try here.
Any help would be very appriciated!
Cheers,
~Bryan -
An error occurred while attempting to create the d...
I keep receiving this message
An error occurred while attempting to create the directory: C:\Users\owner\AppData"
anyone knows how to fix this?I might be wrong but the issue is most likely related to missing permissions for the C:\Users\WinUserName\AppData folder. If this is the case, then not only Skype but all other programs which need to access this folder will not install properly. In order to locate this folder one has to type %appdata% in Windows Start Search box and press Enter. Right click on the AppData folder, select properties and Security tab. Select in turn all the user names listed there. Should be something like SYSTEM, your win user name and Administrators. For each of the users look for which permissions are given for this folder. If some permissions are missing, then click Edit and change to Allow. You will only be able to do this if you have Administrative privileges.
Maybe you are looking for
-
ITunes Account Access 12.0.1
Hello, On my mac, I updated to Yosemite. I could successfully log in to my Apple ID the initial time and then when I click on my profile and select any of the options under my account like "Wish list" or "Redeem" it makes me put in my password again.
-
How to find the list of open shopping carts
Hi , i want to develop a custom program to find out the list of open shopping cart ( that is shopping cart in approved state but no follow on document created ). what is the best way to find this ? the idea is to find the lsit of all open shopping c
-
could it be to do with the compatability being set to a windows setting?
-
Unicode Conversion Preparations not finished
Hello, we are upgrading our system to ERP 6.0 EHP 4 with unicode conversion. During the "Preprocessing" phase I get the following error: Error: The Unicode Conversion Preparations on the startrelease (transaction SPUMG) have not been finished yet. Yo
-
HT2515 Why is this outdated information still being posted?
http://support.apple.com/kb/HT2515 Both Apple options were disabled months ago. In Snow Leopard there is no option to sign up via iCloud. GoogleTalk require software download and apparent install (from them) to sign up. Other than AIM, how can I easi