An unexpected error has occurred. Details: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
While Integrating Reporting Services with SharePoint 2010 getting below error:
An unexpected error has occurred. Details: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
Thank,
Said Al Balushi.
1- Clicked web service URL, getting the fallowing
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded. The error was: System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'
or one of its dependencies. The system cannot find the file specified. File name: 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' at Microsoft.ReportingServices.SharePoint.Objects.RSSPImpSecurity.set_StaticCatchAccessDeniedException(Boolean
value) at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper..ctor() at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelperFactory.get_ServiceHelper() WRN: Assembly binding logging is turned OFF. To enable assembly bind
failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
. (rsSharePointObjectModelNotInstalled) Get Online Help
2- Port 135 is open from WFE (App and WEF is same server) to Reporting server
3- I am using default instance
Thanks,
Said Al Balushi
Similar Messages
-
'Unexpected Error has Occurred (-50) w/ synch of Aperture photos
Hi - When I go to synch my Ipad 2 (v. 4.3.5) with my iTunes (v. 10.4 (80) and only when I have selected to synch photos from my Aperture (v. 3.1.3) I get the following error in iTunes: 'Unexpected Error Has Occurred (-50). If I try to synch from iPhoto, no problem. If I remove the 'synch photos' no problem synching.
Any ideas?? I think I'm running the latest of all revs. I upgraded everything & rebooted before posting. I'm running Mac 10.6.8
Thanks!Sorry you have had such a bad first impression..
Is the ipv6 turned on? This was an after thought as they seem to have released both firmware and utility and woken up after the event to the fact they actually needed ipv6 on to manage it.
http://support.apple.com/kb/TS4597
Otherwise I don't see what you are using to connect to the TC from the iMac.. is it wired or wireless??
Can I suggest you do the setup again.
This time use ethernet to the TC.. in full isolation from the network. And do the setup manually.
You may need to factory reset again.. sorry about that .. and start over.. only the Mac plugged into the TC.. nothing else.
You may need further help just post where you get up to and we can sort out what is happening from there.
This often works easier at the start from the airport utility in iphone or ipad if you have one. -
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
-
hello adobe muse when opening the program after entering my account information it says an unexpected error has occurred, what should I do
Hi
This looks an older version of Adobe Muse, Please try the steps given in this article
An unexpected error occurred I -200 -
Hi,
Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
I already removed the update suggested on other threads (KB2844286), but everything remains the same.
I always receive errors like this one:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
When I try to access administration tools it happens the same error, and I don't know what I can do more.
Please help me.
best regards,
Jorge GuimarãesI followed some tips, to trace the error, allowing some trace debug, and got this:
Server Error in '/' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479 -
Getting 'an unexpected error has occurred' while editing report viewer webpart in Sharepoint webpart
Hi All,
I have added report viewer webpart in a page. On click of edit webpart link I am getting webpart edit toolbox. But after clicking on apply or save button, getting the following error.
'an unexpected error has occurred'
If I refresh the page then report is working fine, but webpart edit settings are not getting saved.
Please suggest.
Thanks in advance !
Soumya DasHi ,
For troubleshooting your issue, please take steps as below:
1. Open web.config file of current web application
2. Find the node that begins
<trust level=
3. Change the trust level from WSS_Minimal to
WSS_Medium
4. Save the file
5. Drop to command prompt and execute :
iisreset
If your issue persists, please provide detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Hi All,
I am using sharepoint designer 2007 and am trying to use a sqldatasource to populate a gridview and then display that on an .aspx page. While in designer everything seems to configure okay. I am able to test the connection and display the data
as expected from the sqldatasource within designer. Then I have the gridview control use the sqldatasource. At that point the grid (within designer) displays the headings as expected. The data that is displayed in the cells is "test data" rather
than actual data value - I'm not sure if this is normal - for example, the data values in every column / row are all equal to 'abc'. Date values are all equal to current date.
Then when I actually display the sharepoint page (via Preview in browser) I get an error "An unexpected error has occurred".
I am using SQLExpress on my laptop as the database for the sqldatasource. I have tried both integrated (windows) and SQL authentication with the same results.
Here is the aspx code from designer:
<asp:GridView runat="server" id="GridView1" AutoGenerateColumns="False" DataSourceID="SqlDataSource1">
<Columns>
<asp:boundfield DataField="Case Creation Date Time" HeaderText="Case Creation Date Time" SortExpression="Case Creation Date Time">
</asp:boundfield>
<asp:boundfield DataField="Case #" HeaderText="Case #" SortExpression="Case #">
</asp:boundfield>
<asp:boundfield DataField="Source" HeaderText="Source" SortExpression="Source">
</asp:boundfield>
<asp:boundfield DataField="Priority" HeaderText="Priority" SortExpression="Priority">
</asp:boundfield>
<asp:boundfield DataField="Status" HeaderText="Status" SortExpression="Status">
</asp:boundfield>
<asp:boundfield DataField="Category" HeaderText="Category" SortExpression="Category">
</asp:boundfield>
<asp:boundfield DataField="Creator group" HeaderText="Creator group" SortExpression="Creator group">
</asp:boundfield>
<asp:boundfield DataField="Assigned Group" HeaderText="Assigned Group" SortExpression="Assigned Group">
</asp:boundfield>
<asp:boundfield DataField="Security Event Title" HeaderText="Security Event Title" SortExpression="Security Event Title">
</asp:boundfield>
<asp:boundfield DataField="Security Event Resolution Details" HeaderText="Security Event Resolution Details" SortExpression="Security Event Resolution Details">
</asp:boundfield>
<asp:boundfield DataField="SLA Achieved" HeaderText="SLA Achieved" SortExpression="SLA Achieved">
</asp:boundfield>
<asp:boundfield DataField="Event Reported Date Time" HeaderText="Event Reported Date Time" SortExpression="Event Reported Date Time">
</asp:boundfield>
</Columns>
</asp:GridView>
<br>
<br>
<br>
<asp:SqlDataSource runat="server" id="SqlDataSource1" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=WN-MNA79GY0V0JD\SQLEXPRESS;Initial Catalog=CD_OPS_DATA;Persist Security Info=True;User ID=Sharepoint_User;Password="xxxxxx""
SelectCommand="SELECT * FROM [Critical Cases] ORDER BY [Case Creation Date Time] DESC">
</asp:SqlDataSource>
<br>
<br>
</td>
</tr>
</table>
</asp:Content>
Any help is appreciated.
Thanks !Thanks Daniel.
I am unable to connect to my SQL EXPRESS db on my laptop via SPD 2007: I get the error -
I am able to access that database via SQL Server Mgmt. Studio (both with Windows and SQL Server authentication). I can also access a SQL Express database on a remote server from the exact same SPD 2007 session: I get -
So, I wonder why I can connect to the remote but not the local? Anyway, if you have any ideas I would appreciate it. I am willing to do the work from the article you mention but wanted to rule out there being a simple DB access issue first. I'll also
start to find the ULS logs and review them.
Thanks again !!
Update on 1-3-14: Hi, since yesterday I also have been able to connect to the SQLEXPRESS database / table and display the .aspx page with the gridview in Visual Studio 2010.
Update 1-26-14: Sorry for the delayed response. I determined the reason why I could not connect to the SQLEXPRESS instance on my laptop was that there was a local host intrusion (firewall) rule on my machine that prevented an inbound connection
on port 1433. SharePoint server >>> inbound connect on port: 1433 >>> to Laptop device, not allowed.
Thanks. -
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
I am working a SharePoint site with a custom masterpage and css. Everything displays just fine and the site functions with several subsites, and so forth. I have double-checked to ensure that important content placeholders were on the new masterpage, even
if they were "hidden" from view.
However, a new issue came up this week: I was moved from a contributor to a designer list so that I could convert word files in a doc library in web pages. When that change happened, I lost the ability to select "add new items" to lists or add
events to calendars. [not sure if causation, or just correlation] On a similar note, no one--not even those with higher permissions levels than me---can access the "site permissions" page in browser now (not sure if this coincides with my issue over
the lists/calendars, but in both cases the notification "an unexpected error has occurred" comes up).
I temporarily switched a subsite to the default masterpage, and lists and site permissions page functioned fine--no error. Therefore, it appears as though something in the custom masterpage (or embedded css?) is causing this error to come up. But what could
it be?
I ran across a forum question that mentioned a bug related to alternative css:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/53151269-dd61-4c71-8263-c1880450a1bb/sharepoint-2010-unable-to-access-site-settings-site-permissions-from-a-site-created-from-a-template Solutions
said to check the correlation ID and use powershell. The guy in my department who checked the correlation ID said that nothing useful came up, and I got the impression that the powershell solution didn't work out for him either (I don't work on that side of
things; I am on the design side).
So, does anyone have any idea what the problem could be? Again, I have checked and double-checked those content placeholders in my custom masterpage - they are all there. I built the site using one of Randy Drisgill's masterpage templates.
Up until this point, I haven't had any issues with the template, my custom code, etc.I am having the same issue, was this ever resolved?
-
An unexpected error has occurred. Please contact your system administrator
Hi All,
I have created one transaction in AR and i am trying to apply a credit transaction against this transaction in transaction work bench i am getting following error.
Error:
An unexpected error has occurred. Please contact your system administrator.
we are using R12.1.3 version.
Please help us.
Regards,
Raju.GHi Raju,
Please check for any errors in the DB and Application log file and post them here.
Also refer notes:
Transactions Workbench: Credit a Transactions Ends in Error: An Unexpected Error Has Occurred. Please Contact Your System Administrator (Doc ID 1552365.1)
Troubleshooting Credit Memos in the Transaction Workbench and AutoInvoice in Receivables (Doc ID 1110573.1)
Transactions Workbench Error: Listing of FRM Errors (Doc ID 1321612.1)
Thanks &
Best Regards , -
Web console: An unexpected error has occurred
Hi
When I try to open SCOM 2012 web console I get this error:
An unexpected error has occurred
<endgetresponse><beginonui></beginonui></endgetresponse>
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support : System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are
unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer --->
System.Net.WebException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult) at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<endgetresponse>b__9(Object sendState) at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<beginonui>b__0(Object
sendState) --- End of inner exception stack trace --- at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state) at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult
result) --- End of inner exception stack trace --- at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result) at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String
methodName, Object[] args, IAsyncResult result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult
result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result) at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)</beginonui></endgetresponse>
<endgetresponse><beginonui>Please assist.</beginonui></endgetresponse>
thanks
<endgetresponse><beginonui></beginonui></endgetresponse>Hi,
Take a look at this article to fix this issue:
SCOM 2012 Web Console HttpWebRequest_WebException_RemoteServer
http://www.bictt.com/blogs/bictt.php/2012/05/06/scom-2012-web-console-httpwebrequest_webexception_remoteserver
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Just as the title infers, I have a user who is experiencing an unexpected error when he clicks on "EDIT" after clicking on the ellipsis. Document in the Document library is an MS Word file.
Hi,
According to your post, my understanding is that an unexpected error has occurred when a user clicks on ellipsis then "EDIT".
Please make sure he has the edit permission.
Please make sure the Office 2013 is installed correctly on his computer.
In addition, I recommend to use another brower to check whether it works.
If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS
log file is in the location: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can check the ULS log by the methods here:
http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
More information:
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"
Hi mike,
Seems like a frustrating problem! Try restarting your device, and trying again. If that doesn't work, in settings, under store, tap your apple id at the bottom of the page, and then sign out. Sign back in again, and try again.
Also, check you have enough remaining space on your iPad for the app you want to download, you can do this in settings, then general, then usage.
I also reccomend buying the app in iTunes on your computer, and then syncing it to your device.
Let me know how you get on, and I'll get back to you with further help if needed,
Nathan -
My contact list just disappeared? Says an unexpected error has occurred? I can't add new contacts to my email, on my I pad.
I don't know how to get my contacts back.petty0103 wrote:
... it says an unknown error has occurred.
That Error message is important... what was the exact wording.? -
I transfered my iWork '09 to my new Mac Air. Now my Keynote won't open. I get message, "An unexpected error has occurred, please quit and reopen Keynote." This doesn't work.
so Keynote still isnt working after installing, I thought you had it sorted from your last post.
If you have not done so remove any files relating to iWork and Keynote and reinstall iWork
files that must go are:
the iWork ’09 folder from the main HD > Applications;
the iWork ’09 folder in HD > Library > Application Support
the individual iWork application plist files found in HD > Users > (your account) > Library >
There are a number of free application removal tools that will do this for you:
trashme webpage
apptrap webpage
appcleaner webpage
Maybe you are looking for
-
How Do I Transfer Clips From One Project To Another?
I have what is probably a basic question. I have two projects that I'm working on, and need to transfer a set of clips from my first project to my second. How would I do that.
-
Why is quality of photo poor when viewing in the organizer?
When i am viewing photos in the photoshop elementss 10 organizer the quality is poor when I am viewing one photo at the largest size yet it says it is high quality and in focus. Is this normal? Thank you.
-
How to view the myanmer fonts in iPad?
How could I view the Myanmer fonts in iPad?
-
Galaxy Stellar Email Brightness Settings
The pre-installed email product on my Samsung Galaxy Stellar is experiencing the following problem after OS System Updates: All other programs on the phone utilize the brightness settings from the Display settings, but the email product is dim (pre-s
-
[Solved] Filesystem check failed - manual repair too
Good Evening. Recently my Arch box hang up and I had to reboot forcefully. I expected to get a filesysem scan. The messages on bootup say, that the filesystem check failed and I have to repair it manually. The exact error message is similar to http:/