An unexpected error has occurred - photos
I just switched from iPhotos to the new Photos app. When I first used it, it said it was converting my old iPhoto Library. The next time I tried to open Photos, I got an error message,"An unexpected error has occurred. Please quit and restart the application." I've tried rebooting, and opening Photos with the alt key down and nothing seems to work. I can't even open my old iPhoto library, because it says I need to the old iPhoto app to do it. I have lost access to 40 + years worth of digital photos. Can anybody help me?
My iPhoto Library was in Mark/Pictures/iPhoto Library.
There is now a new file called Mark/Pictures/Photos Library, but it won't open.
Hi,
The error here didn't help much.
Please first take a try with what britishdhez suggested.
If it happens again, please click on the advanced tab and post the full error messages here. And please have a share about which wizard you were trying to run, to troubleshoot what?
In addition, please also take a check into Event Viewer to see if we could get any errors to track with.
Best regards
Michael Shao
TechNet Community Support
Similar Messages
-
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
-
'Unexpected Error has Occurred (-50) w/ synch of Aperture photos
Hi - When I go to synch my Ipad 2 (v. 4.3.5) with my iTunes (v. 10.4 (80) and only when I have selected to synch photos from my Aperture (v. 3.1.3) I get the following error in iTunes: 'Unexpected Error Has Occurred (-50). If I try to synch from iPhoto, no problem. If I remove the 'synch photos' no problem synching.
Any ideas?? I think I'm running the latest of all revs. I upgraded everything & rebooted before posting. I'm running Mac 10.6.8
Thanks!Sorry you have had such a bad first impression..
Is the ipv6 turned on? This was an after thought as they seem to have released both firmware and utility and woken up after the event to the fact they actually needed ipv6 on to manage it.
http://support.apple.com/kb/TS4597
Otherwise I don't see what you are using to connect to the TC from the iMac.. is it wired or wireless??
Can I suggest you do the setup again.
This time use ethernet to the TC.. in full isolation from the network. And do the setup manually.
You may need to factory reset again.. sorry about that .. and start over.. only the Mac plugged into the TC.. nothing else.
You may need further help just post where you get up to and we can sort out what is happening from there.
This often works easier at the start from the airport utility in iphone or ipad if you have one. -
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
Hi,
Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
I already removed the update suggested on other threads (KB2844286), but everything remains the same.
I always receive errors like this one:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
When I try to access administration tools it happens the same error, and I don't know what I can do more.
Please help me.
best regards,
Jorge GuimarãesI followed some tips, to trace the error, allowing some trace debug, and got this:
Server Error in '/' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479 -
I am working a SharePoint site with a custom masterpage and css. Everything displays just fine and the site functions with several subsites, and so forth. I have double-checked to ensure that important content placeholders were on the new masterpage, even
if they were "hidden" from view.
However, a new issue came up this week: I was moved from a contributor to a designer list so that I could convert word files in a doc library in web pages. When that change happened, I lost the ability to select "add new items" to lists or add
events to calendars. [not sure if causation, or just correlation] On a similar note, no one--not even those with higher permissions levels than me---can access the "site permissions" page in browser now (not sure if this coincides with my issue over
the lists/calendars, but in both cases the notification "an unexpected error has occurred" comes up).
I temporarily switched a subsite to the default masterpage, and lists and site permissions page functioned fine--no error. Therefore, it appears as though something in the custom masterpage (or embedded css?) is causing this error to come up. But what could
it be?
I ran across a forum question that mentioned a bug related to alternative css:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/53151269-dd61-4c71-8263-c1880450a1bb/sharepoint-2010-unable-to-access-site-settings-site-permissions-from-a-site-created-from-a-template Solutions
said to check the correlation ID and use powershell. The guy in my department who checked the correlation ID said that nothing useful came up, and I got the impression that the powershell solution didn't work out for him either (I don't work on that side of
things; I am on the design side).
So, does anyone have any idea what the problem could be? Again, I have checked and double-checked those content placeholders in my custom masterpage - they are all there. I built the site using one of Randy Drisgill's masterpage templates.
Up until this point, I haven't had any issues with the template, my custom code, etc.I am having the same issue, was this ever resolved?
-
An unexpected error has occurred. Please contact your system administrator
Hi All,
I have created one transaction in AR and i am trying to apply a credit transaction against this transaction in transaction work bench i am getting following error.
Error:
An unexpected error has occurred. Please contact your system administrator.
we are using R12.1.3 version.
Please help us.
Regards,
Raju.GHi Raju,
Please check for any errors in the DB and Application log file and post them here.
Also refer notes:
Transactions Workbench: Credit a Transactions Ends in Error: An Unexpected Error Has Occurred. Please Contact Your System Administrator (Doc ID 1552365.1)
Troubleshooting Credit Memos in the Transaction Workbench and AutoInvoice in Receivables (Doc ID 1110573.1)
Transactions Workbench Error: Listing of FRM Errors (Doc ID 1321612.1)
Thanks &
Best Regards , -
Web console: An unexpected error has occurred
Hi
When I try to open SCOM 2012 web console I get this error:
An unexpected error has occurred
<endgetresponse><beginonui></beginonui></endgetresponse>
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support : System.ServiceModel.CommunicationException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are
unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer --->
System.Net.WebException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
---> System.Net.WebException: [HttpWebRequest_WebException_RemoteServer] Arguments: NotFound Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.0&File=System.Windows.dll&Key=HttpWebRequest_WebException_RemoteServer
at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult) at System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<endgetresponse>b__9(Object sendState) at System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<beginonui>b__0(Object
sendState) --- End of inner exception stack trace --- at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state) at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult
result) --- End of inner exception stack trace --- at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result) at System.ServiceModel.ClientBase`1.ChannelBase`1.EndInvoke(String
methodName, Object[] args, IAsyncResult result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.DataAccessServiceClientChannel.EndExecute(IAsyncResult result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.IDataAccessService.EndExecute(IAsyncResult
result) at Microsoft.EnterpriseManagement.Presentation.DataAccess.Proxy.ServiceReference.DataAccessServiceClient.OnEndExecute(IAsyncResult result) at System.ServiceModel.ClientBase`1.OnAsyncCallCompleted(IAsyncResult result)</beginonui></endgetresponse>
<endgetresponse><beginonui>Please assist.</beginonui></endgetresponse>
thanks
<endgetresponse><beginonui></beginonui></endgetresponse>Hi,
Take a look at this article to fix this issue:
SCOM 2012 Web Console HttpWebRequest_WebException_RemoteServer
http://www.bictt.com/blogs/bictt.php/2012/05/06/scom-2012-web-console-httpwebrequest_webexception_remoteserver
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Just as the title infers, I have a user who is experiencing an unexpected error when he clicks on "EDIT" after clicking on the ellipsis. Document in the Document library is an MS Word file.
Hi,
According to your post, my understanding is that an unexpected error has occurred when a user clicks on ellipsis then "EDIT".
Please make sure he has the edit permission.
Please make sure the Office 2013 is installed correctly on his computer.
In addition, I recommend to use another brower to check whether it works.
If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS
log file is in the location: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can check the ULS log by the methods here:
http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
More information:
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"
Hi mike,
Seems like a frustrating problem! Try restarting your device, and trying again. If that doesn't work, in settings, under store, tap your apple id at the bottom of the page, and then sign out. Sign back in again, and try again.
Also, check you have enough remaining space on your iPad for the app you want to download, you can do this in settings, then general, then usage.
I also reccomend buying the app in iTunes on your computer, and then syncing it to your device.
Let me know how you get on, and I'll get back to you with further help if needed,
Nathan -
My contact list just disappeared? Says an unexpected error has occurred? I can't add new contacts to my email, on my I pad.
I don't know how to get my contacts back.petty0103 wrote:
... it says an unknown error has occurred.
That Error message is important... what was the exact wording.? -
I transfered my iWork '09 to my new Mac Air. Now my Keynote won't open. I get message, "An unexpected error has occurred, please quit and reopen Keynote." This doesn't work.
so Keynote still isnt working after installing, I thought you had it sorted from your last post.
If you have not done so remove any files relating to iWork and Keynote and reinstall iWork
files that must go are:
the iWork ’09 folder from the main HD > Applications;
the iWork ’09 folder in HD > Library > Application Support
the individual iWork application plist files found in HD > Users > (your account) > Library >
There are a number of free application removal tools that will do this for you:
trashme webpage
apptrap webpage
appcleaner webpage -
These errors only appear on my laptops. Running FBMW Add Ons with grease money on 1 laptop , and the other laptop does not have these installed. The problem started 3 days ago.
From Firefox Error Console:
Warning: Error in parsing value for 'background-image'. Declaration dropped.
Source File: https://support.mozilla.com/en-US/questions/new?product=beta&category=b2&search=IN+FB+Mafia+Wars+getting+this+message+++Unexpected+Error+has+occurred.+++Requested+URL+not+found%3A++400+++What+do+I+do%3F&showform=1
Line: 0
These types of errors appear whenever I try doing any new actions in Mafia Wars.Hello everyone with AVG, I have the simple solution. 1) Open your AVG Antivirus File 2) Under Tools, Open Advance Settings 3) On the left side, Click on LinkScanner 4) On the Box on the right-hand side... Unclick "ENABLE SURF-SHIELD" Click OK on the bottom of the page. PROBLEM FIXED
-
While ordering book:'Unexpected error has occurred, please try again later'
Hello,
Not sure if this is a suitable forum, but when I was using Iphoto '08 V7.1.3 (latest version), and I tried to purchase an album, the following error always appeared : "Unexpected error has occurred, please try again later".
It always appears after iphoto has transfered all the data across after I click 'Buy Now'. And it is driving me crazy!
I called up apple support and have tried to do whatever they told me to, which includes:
1) Creating a new album
2) Creating a new apple i.d.
but its all futile! The dreaded message always appears!
Does anyone know if theres any way I can just SEND THE THING over manually, in a CD or something, cos I really want the album book! Or, do any technical guys here have any idea?? Im also kinda tired of waiting on the hold line on the phone!I wish I could help - but I am having the same exact problem. It is totally frustrating to make the book and then go through all the steps only to have the same message appear.
-
We are in day 5 of using SP 2010 on our 4 server farm. The farm was created by taking our MOSS 2007 databases and attaching to our database.
We have had a variety of cases of users encountering the "An unexpected error has occurred". In perhaps 10% of the cases, we have found the correlation id in the logs - which are tracing using the default logging levels.
We have used the Merge-SPLogFile and get-splogeven cmdlets but get no records returned for the others.
They are not occurring frequently. But when they do, we don't have a lot to go on to figure out what is wrong.
I have read various other threads on the site. I have looked in all of the 14 hive logs on all 4 servers (which should not be necessary after having used merge-splogfile) but do not find the correlation anywhere. I have used uls viewer - still do not find
it.
This is a production system where users are making use of the system 24x7. I need to find things to try that do not take down the system.
Is there any way that increasing the verbosity of the logging might be requried so we can see these errors?It truly depends on the error that occurs, but I would say that increasing your logging level would be the first place to start.
BE AWARE... Setting logging levels to Verbose WILL fill up drive space very quickly, so if your servers don't have much free drive space, you run the risk of crashing the server when it runs out of space... in the very least, server performance will grind
to very poor levels.
If you're not finding the correlation IDs, then upping the level might be the only way to get the messages. The best approach is to try and find a recreatable scenario. If you can recreate the error through UI actions, you can up logging levels
on an App server (to avoid impact on end users) and point directly to that App server (using HOSTS entries) in order to recreate the error. Once you've recreated the error, you can restore normal logging levels on the server again and then proceed to
parse the logs using ULSViewer in order to find the target correlation ID.
I trust that answers your question...
Thanks
C
http://blog.cjvandyk.com |
LinkedIn | Facebook |
Twitter | Quix Utilities for SharePoint |
SharePoint Admin Nav Console (SPANC)
Maybe you are looking for
-
I can't burn a disc even though my computer is authorized
I'm having trouble burning discs from a brand spanking new laptop with Windows 8, and the latest itunes version! My computer is authorized, but the option to burn a playlist to disc still doesn't show-up in the file catagory. I'm baffled and frustrat
-
Problem with copying files between OS 9 to OS 10.4.9
We have updated 2 computers to 10.4.9 after som minor problems its working fine the only problem we still have is that we cannot copy files from our older Mac running OS 9.2.2 to the macs running 10.4.9 if we copy 1 file its working when we want to c
-
Itunes says there's an update but doesn't appear in app store
Anybody else get this? I have been getting this for a while with iTunes updates... There will be updates available but they never appear in the App Store....
-
Change vertical size of audio widget box in 2-column layout?
The vertical size of this audio widget is just too big. If I grab one of the square adjustment handles I can drag it a little smaller, but that reduction always reverts back to its prior size after I navigate away from the page and return later. The
-
How do i get my apple email to work after switching to icloud?
how do i get my apple email to work after switching to icloud?