An unexpected error occurred (error code -6584).

I get this error mesage, "An unexpected error occurred (error code -6584)." when I try yo run Time Machine application. Time capsule is not showing up under Devices in Finder, and no backups are happening?

This means the backup has likely become corrupted.
Reboot the TC just to be sure.. and even the whole network.. restarting in correct order, modem.. TC and clients with 2min gap.
No luck then do a verify of the backups.
See A5 here http://pondini.org/TM/Troubleshooting.html
There is another method.. hold the option key as you click the TM icon clock in the top menu.. you will see verify backups there.
Sometimes it is hard to get past it and the only way is to wipe the old backup and start afresh.
See this thread amongst many.. as this is not uncommon.
https://discussions.apple.com/thread/3123920?tstart=0

Similar Messages

  • I'm getting this error message, "An unexpected error occurred (error code -6584)"  Does any know what this is?

    I'm getting this error message, "An unexpected error occurred (error code -6584)"  Does any know what this is?

     

  • Finder An unexpected error occurred (error code -6584).

    I get many errors from my Retina 15" macbook pro
    POP3 account is not displaying messages
    safary frozen and tryin to connect to 201.122.36.151
    Finder unexpected error occurred (error code -6584)
    Time machine error sparse bundle arlready in use

    First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
    1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
    2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
    3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
    4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

  • I keep getting this when trying to open Time machine:   An unexpected error occurred (error code -6584).

    I keep getting this when trying to open Time machine:   An unexpected error occurred (error code -6584). time machine wont even open up. My Time capsule has a green lite and appears fine
    Thaks,

    This often means the backup is corrupted.
    First of all reboot the network.. turn everything off and restart in order.. modem.. TC.. clients.
    If you still have issues, hold the option key when you click the Time Machine icon on the top menu and it will bring up verify backups.
    Do that.
    Read this thread if you need more..
    https://discussions.apple.com/thread/3123920?tstart=0
    It seems to be a fairly complex problem if the above don't work.

  • Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

    Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
    I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
    I tried those solutions for my trash and that helped after some trying.
    However, I still have the problem with copying and moving files.
    I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
    Who can help me??
    Cannot seem to find any info on it on the support-forums or elsewhere.
    My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
    Any help would be greatly appreciated...
    Otto

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • The operation can't be completed because an unexpected error occurred (error code -50)

    I have a Seagate Central 3tb NAS (latest firmware) attached to my wireless router (Netgear wndr3400v3).  I have a late 2011 macbook pro with Yosemite on it.  When I go through finder to use my NAS I keep getting "The operation can’t be completed because an unexpected error occurred (error code -50)" .  I only get it when I am trying to copy a big folder with other folders and files with in.   I can copy a single file or create folders.  If i try to copy a folder with 100 pics in it then I get the error.  I can create the folder on the NAS and select all 100 files.  When I drag them to the NAS, then they copy with no problems.  Every so often my time machine has an error and says that it has to create a new backup. I read some where to make sure that "put hard disk to sleep when possible" should be selected in the energy saver in preferences.  Still no luck.  A can also drag any file from the NAS back to my laptop or view them from the NAS with no problems.
    Thanks for any help in advance.
    Billy

    Hi there,
    Well I have exactly the same problem! Recently I reset my WD My book White light (2 x 1TB RAID disk), due to the fact that the disk ran full because of TimeMachine.
    I reset the disk, and now I can only write some files to it, but most give this error code.
    I wrote to WD, but they could not give an answer.
    Q: did you update the firmware? Maybe that is causing the problem, in that it is maybe not consistant in the filesystem?

  • I tried to empty the trash, full of back up file from my hard disk and it just says: "The operation can't be completed because an unexpected error occurred (error code -8003)"

    I have an external hard disk of 319.73 GB that I use as back up memory and where I put all the movies and other files that I can't leave on the computer as they occupy too much memory space . One day I was deleting all the previous dated back up to have more space on it , but had to stop the trash for doing it cause it was taking too long and now every time that I try to empty the trash it just says "The operation can’t be completed because an unexpected error occurred (error code -8003)" and even if I press CONTINUE it won't empting it . I'm not really pratical with this things and I tried already to find out the solution here and on Google but apparently nobody ever had a similar error code and I don't know what else to do.
    I've a MacBook Pro with a Mac OS X 10.6.8 Version.
    Thanks again for the help and sorry if I did some english mistakes !
    PEACE & LOVE

    Hey donnie90,
    It seems like this article might be the best for helping you address this issue:
    You can't empty the Trash or move a file to the Trash
    http://support.apple.com/kb/ht1526
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I'm trying to delete files from and external disk and i get this: The operation can't be completed because an unexpected error occurred (error code -1407) can somebody help me? files do not get deleted..and the trash not emptied.. thanks

    I'm trying to delete files from an external disc and it doesn't let me couse this pops up:
    The operation can’t be completed because an unexpected error occurred (error code -1407)
    Please what does it mean? I also have a file in the trash of my mac book named something similar to: a'*.'*.'*'.*.
    and this cannot be deleted either..
    Please let me know what I can do.
    I also have many files in the external disc that I need so I cannot do a format..
    Thank you.
    Best Regards
    Karin

    Have you tried putting the file from your Drobo, onto your computer, then onto to the external hard drive?

  • HT201250 i'm getting message: can't be opened because you don't have permission to see its contents. and he operation can't be completed because an unexpected error occurred (error code -8003).

    I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
    Any advise how to fix my problem?
    thanks in advance

    While you see a single trash can, in reality there are trash folders on each mounted volume.  I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated.  So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty.  Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
    If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal.  We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time).  So launch Terminal (in utilities).  You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
    This first line is the only exception to the copy/pasting since you have to enter some information.
    sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
    where your-TM-volume-name is the name of your TM volume.  That's the part you have to fill in since I don't know it.
    When you hit return the sudo in that command will cause a prompt for your admin password.  Enter it and hit return again.  Note the password will not be shown as you type it.  Post the results so I can tell you what to do next.
    Note this ls command is not doing anything but listing the files in the TM's .Trashes folder.  Remember I said each drive has it's own trash folder.  .Trashes is it.

  • External hard drive networked via AirPort Extreme gives "The operation can't be completed because an unexpected error occurred (error code -50)" roughly every two days

    My lab has about 10 Mac computers.  We all access a central hard drive by the way of wifi provided by AirPort.  It's just a regular external hard drive (Seagate Desktop Drive) that I turned into our central storage space by plugging it into AirPort (USB).  It works pretty well.  We seem to be fine with viewing the file directories, opening files, saving, deleting etc., for a day or two.  But then after a day or two, when when trying to modify files or move new files onto the central hard drive, we get the error message: "The operation can’t be completed because an unexpected error occurred (error code -50)"
    Any suggestions as to what may be causing this problem?
    All of the computers are 2011 iMacs & MacPros.  The AirPort is 802.11n WiFi.  The hard drive is a Seagate USB 3.0 Desktop Drive.
    Thank you for your insight/suggestions.

    Thanks for your reply.  I agree about the communication issue. Let me explain my setup and what I am trying to do and perhaps you can answer my questions or make suggestions.
    I have a MAC Mini with a Sony TV for the video monitor.  The  Mac Mini is hard wired to the AE (Airport Extreme).  The AE has a 2 TB HD hooked up to the USB Port.  I have a 17" Mac Book Pro on the WIFI Network.
    I am trying to use the MAc Mini as a "Media Server" of sorts.  Once I get iTunes running the way I plan I am goign to hook up my Apple TV (2nd Generation) to my television downstairs.
    What I am trying to accomplish is have iTunes on all my computers look to the External HD on the AE for the files.  This is why I am having my (-50 errors).
    So far I have noticed that if I go and try to download from iTunes purchased videos that are not ont he computer (to the external HD) it will also occassionaly give me teh -50 error.
    Is there a way to change where the files go when I download them?  Say I want to download videos to the computer but not to the external HD?  However I would want to still be able to move them to the External HD.

  • Empty trash The operation can't be completed because an unexpected error occurred (error code -8003).

    I can't empty my trash.  The operation can’t be completed because an unexpected error occurred (error code -8003).
    I have started up in a guest account and that show empty trash bucket.
    I have use 'option' or all three, control, option, command.  and nothing works.
    This has been a problem for about 3 weeks now.
    I have an external WD hardrive for back up, these are the files that I try to erase - and I have unlocked each one, still no luck....
    Can some one give me a hint what to do?
    Jan

    Don;
    Plus all of you that have tried to help me with my 'empty trash' problem.  I have it solved!
    I am running a Western Digital external hard drive.  I phoned them just now and they asked me to unplug the WD drive, and I reset the back up occasions, it was backing up every hour, which was way too often. The trash emptied when I unplugged and now I have rebooted and the trash is still empty
    Thanks to all who gave me suggestions as to what I needed to do to empty my trash can!  It had more than 1600 items living there.  What a relief.
    Jan

  • The operation can't be completed because an unexpected error occurred (error code -8060).

    Hi,
    I want to copy a folder from desktop to my document (or anywhere else on a MAC) I got this error "The operation can’t be completed because an unexpected error occurred (error code -8060)." everytime at the same position when it's about to finish (sth like 75%).
    I have MBPR + Mountain Lion and the folder is a Xcode project if it helps.
    BTW there is nothing in trash.
    Thanks

    Thanks but I solved this problem with this tip:
    tba55
    Re: Error when trying to copy one of my folders, or compress it in the finder 
    Aug 11, 2012 12:41 PM (in response to Maziyar)
    I found some subdirectories within my Project folder that were complete duplicates of other directories. After deleting those, I no longer had the error.  I don't know where they came from, but think they may have been created after an upgrade, say from Xcode 3.0 to 4.0 but don't remember.  Anyway, don't know any more about it, only that it went away after I deleted those duplicate subfolders.  Good luck !
    I found unlimited folder in folder in my Xcode project folder that made the size from 285MB to 1.5G. It was that duplicate folders made this error.
    I removed and it solved the problem.
    Thanks

  • What exactly is this: The operation can't be completed because an unexpected error occurred (error code -50).

    When I try and create a new folder on an external hard drive or copy files I get this: The operation can’t be completed because an unexpected error occurred (error code -50)
    WHY? What does this mean?

    Linc. Only one hard drive displays this -50 problem. It is plugged directly into the computer but even though the answer i got (the link) only referenced iTunes, I DID unplug the hard drive and REplug into another port ON THE COMPUTER and even though it still is sllow to open when i click on it, the other problem seems fixed. Does all this mean the hard drive or (new) enclosure is faulty? In your opinion?

  • When trying to empty trash, (securely or not), I get this: The operation can't be completed because an unexpected error occurred (error code -8003).

    When trying to empty trash, (securely or not), I get this: The operation can’t be completed because an unexpected error occurred (error code -8003).  FWIW, there are nearly 3000 items in my Trash - although this does not seem the source of the problem.

    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

  • When I try to move files from my mac (v10.8.5) to my external harddrive I get the error message The operation can't be completed because an unexpected error occurred (error code -50).

    When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.

    Some other things to look at.
    https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50

Maybe you are looking for

  • How to execute the download rdl and then reder it to pdf

    Dear all; i am trying to render an ssrs report from mscrm 2013 online version what i can do i can get download the report from the server through SDK of mscrm but i want to execute and rendered that rdl file in pdf format  any suggestion

  • Pls help with .CAP file.

    Hi. I read a lot about how to write java applet for smart card and after read a lot about how to convert .class file into a .CAP file. But I don't know where to find informatin about what to do further. Pls can you tell or give link to a text which e

  • Multiple Copys Of The Same Movie.

    I have 2 copys of the same movie on my ipod touch, One working and one not. i can delete the working copy of the movie but not the broken one. does anyone know how to fix this?

  • Problems with HDMI signal

    I used to connect my macbook pro 13" 10.7.3 to my LCD TV by minidisplay port to HDMI, it worked since december 2011 until yesterday. Now it does not work, my TV does not recognize the signal. How can I solve it?

  • Where did my transitions go???

    I imported a movie I made back in to iMovie to edit it. My transitions work but I the transition icons no long appear when I am editing. I cannot find a way to edit any transitions. But when I hit the space bar the transitions work fine. How can I ge