"An unexpected error occurred while creating a custom installer."

All;
I—and I've seen several others in older posts—have been reported received the error "An unexpected error occurred while creating a custom installer" while attampting to build a customer ARD client installer.  My guess is that this is do to a issue related to 10.8.X (10.8.4, in my case) based console Mac but I cannot confirm this. I have verified that there are no outstanding OS, client or application updates or hot fixes, as well.
Has anyone built an successful installer from Mountain Lion-installed Mac?  Is there any know workarounds?
Thanks in advance, for any help. 

Have the exact same problem.
iMac running 10.8.4
Got through the steps of creating a custom client installer.
if I choose not to customize and just save an installer I don't get the error but it creates a file of Zero bytes in size.
If I chose to configure, when I try to save I get:
An unexpected error occurred while creating a custom installer. Please try again....
Console log reports:
9/1/13 12:32:29.603 AM Remote Desktop[1306]: open on /private/tmp/RemoteDesktopClientInstaller_HEATyAJ5CR/extracted/RemoteDesktopCli ent.pkg/Scripts/RemoteDesktopClient.pkg: No such file or directory
I have tried to save this in several location, with no effect on the error or the information logged, with the exception of the name of the temp directory that DOES contains the file (zero bytes):
RemoteDesktopClient.pkg
Need help with this someone...!
APPLE...I JUST purchase this Applciation for $80.....it just flat out does not work....

Similar Messages

  • UnExpected error occured while creating ejb container

    Hey, I am trying to deploy a new bean that I just wrote with a bean that has already been written. My bean is the News bean, the existing bean is the PPSO bean.
    when I deploy, I get the following exception:
    [26/Feb/2004:11:22:42] SEVERE ( 2104): LDR5004: UnExpected error occured while creating ejb container
    java.lang.ClassNotFoundException: com.pragmatics.ppcig.model.ejb.NewsBean_LocalHomeImpl
         at com.iplanet.ias.loader.EJBClassLoader.findClass(EJBClassLoader.java:457)
         at com.iplanet.ias.loader.EJBClassLoader.loadClass(EJBClassLoader.java:585)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
         at com.sun.ejb.containers.BaseContainer.initializeHome(BaseContainer.java:426)
         at com.sun.ejb.containers.EntityContainer.initializeHome(EntityContainer.java:355)
         at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:230)
         at com.iplanet.ias.server.AbstractLoader.loadEjbs(AbstractLoader.java:345)
         at com.iplanet.ias.server.ApplicationLoader.load(ApplicationLoader.java:81)
         at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:134)
         at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:110)
         at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:294)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.invokeApplicationDeployEventListener(AdminEventMulticaster.java:424)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.handleApplicationDeployEvent(AdminEventMulticaster.java:408)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:291)
         at com.iplanet.ias.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:99)
         at com.iplanet.ias.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:84)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
         at sun.rmi.transport.Transport$1.run(Transport.java:148)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
         at java.lang.Thread.run(Thread.java:534)
    here are pieces of my deployment descriptor:
    <entity>
              <description>PPSO EJB</description>
              <display-name>PPSO EJB</display-name>
              <ejb-name>PPSO</ejb-name>
              <local-home>com.pragmatics.ppcig.model.ejb.PPSOLocalHome</local-home>
              <local>com.pragmatics.ppcig.model.ejb.PPSOLocal</local>
              <ejb-class>com.pragmatics.ppcig.model.ejb.PPSOBean</ejb-class>
              <persistence-type>Bean</persistence-type>
              <prim-key-class>java.lang.String</prim-key-class>
              <reentrant>False</reentrant>
              <env-entry>
    // - select statements here that don't apply - //
    </entity>
         <entity>
              <description>News EJB</description>
              <display-name>News EJB</display-name>
              <ejb-name>News</ejb-name>
              <local-home>com.pragmatics.ppcig.model.ejb.NewsLocalHome</local-home>
              <local>com.pragmatics.ppcig.model.ejb.NewsLocal</local>
              <ejb-class>com.pragmatics.ppcig.model.ejb.NewsBean</ejb-class>
              <persistence-type>Bean</persistence-type>
              <prim-key-class>java.lang.String</prim-key-class>
              <reentrant>False</reentrant>
              <resource-ref>
                   <res-ref-name>jdbc/ppcigDS</res-ref-name>
                   <res-type>javax.sql.DataSource</res-type>
                   <res-auth>Container</res-auth>
                   <res-sharing-scope>Shareable</res-sharing-scope>
              </resource-ref>
         </entity>
    Any ideas what is causing this error?
    Thanks!

    Hi shanu, thanks for your reply,
    Yes I configured the JMS Objects in my AS before deploying the MDB.
    I set
    - a Queue: RFIDLocatorQueue
    - a connection Factory: RFIDLocatorConnectionFactory
    - and a Physical destination for my logical queue called: RFIDLocatorPhysicalQueue
    The latter was linked to the RFIDLocatorQueue by putting RFIDLocatorPhysicalQueue in the name parameter of the RFIDLocatorQueue.
    Is there maybe something else I forgot to configure ?
    thanks a lot

  • An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))

    We are using DPM Version: 4.1.3465.0 with System Center 2012 Service Pack 1 to back up VMs in our Hyper V Cluster. We have a total of 37 VMs with a combination of 2008r2 servers and 2012 servers. One of our 2012 servers will not backup, and we consistently
    get the message "An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))". I have seen this error message when I Googled it, but cannot get past it. I have deleted the Protection Group and
    data and tried to re-create, but get the same errors. I also thought the the server might be mis-reporting the data size, but I expanded that to cover the replication data. I have also tried to perform consistancy checks multiple times with no luck. I have
    not seen a difinitive answer from my Google searches, so was hopeful someone has seen this also, and have had success in resolving. Currently this server has no backup recovery points, so I am worried if it does crash. I think I have the rollups installed
    as well.

    Hi Kelly,
    does the issue still persists?

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

  • An error occurred while executing a custom action:_PopulateUserRoles

    I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
    the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

    After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The  error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
    error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
    These are the steps (I had to create the DWORD 32 bit):
    Click Start, click Run, type regedit, and then click
    OK.
    Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    In the right pane, locate the ServicesPipeTimeout entry.
    Note  If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
    On the Edit menu, point to
    New, and then click DWORD Value.
    Type ServicesPipeTimeout, and then press ENTER.
    Right-click ServicesPipeTimeout, and then click Modify.
    Click Decimal, type 60000, and then click
    OK.
    This value represents the time in milliseconds before a service times out.
    Restart the computer.
    Hope this helps!
    BR,
    Robert
    Robert

  • An unexpected error occurred while the job was running. (ID: 104)

    I'm getting this error in the event logs when trying to run a consistency check / sync with one of our file servers.
    This server was working fine, but w needed to migrate the data to a new partition (GPT) to allow it to expand past the 2TB limit of MBR partitions.  I added a new 3TB disk migrated the data and changed the drive letter to what the old partition was
    prior.  Since then we seem to get this error.
    I have installed the update roll up on both the server and the agent side.  I have also removed the server from the protection group then re-added it.  I've also removed and reinstalled the agent on the file server.
    Any help is appreciated!  Here's the full error from the DPM server:
    The replica of E:\ on server is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. (ID: 3106)
    An unexpected error occurred while the job was running. (ID: 104)

    Server Version is Windows 2012 R2 STD.  DPM is 4.2.1235.0 (DPM 2012 R2).  I expanded the production file server.  All that server does is host up file shares.
    I suspected the fact that I created a new volume and changed drive letter back to the original to be the source cause of the issue.  What I ended up doing is blowing away the backups from this server on disk and re-adding it to the protection group. 
    It now runs much longer, but still times out at random with the error mentioned above.
    Vijay:  The error was copied from Event Viewer.  Not sure what else you require?  Event ID is 3106 from DPM-EM.
    The DPM logs say:
    Affected area: E:\
    Occurred since: 2015-01-05 2:04:38 AM
    Description: The replica of Volume E:\ on servername is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery
    points, but new recovery points cannot be created until the replica is consistent.
    For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
     An unexpected error occurred while the job was running. (ID 104 Details: The semaphore timeout period has expired (0x80070079))
    Date inactivated: 2015-01-05 7:03:04 AM
    Recommended action: No action is required because this alert is inactive.
    Affected area: E:\
    Occurred since: 2015-01-05 2:04:38 AM
    Description: The replica of Volume E:\ on servername is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing
    recovery points, but new recovery points cannot be created until the replica is consistent.
    For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
     An unexpected error occurred while the job was running. (ID 104 Details: The semaphore timeout period has expired (0x80070079))

  • An unexpected error occurred while configuring the Network Bridge

    Windows XP Pro SP2, a new TP61 6460 6WG, all Win updates, all Lenovo updates.
    Everything works fine except... when I'm trying to create a network bridge I always get the following: An unexpected error occurred while configuring the Network Bridge.
    This is not the situation described in Microsoft's Knowledge Base KB309640 (http://support.microsoft.com/kb/309640/en-us). I have no ICS, no ICF.
    Any ideas?

    I had the same problem and was really frustrated. I was about to pull my hairs out but then i was finally able to solve it. The solution is deleting some files of WMI repository. The complete details can be found on my blog http://cheatppc.blogspot.com/2008/07/unexpected-error-has-occured-while.html
    Hope this solves the problem.

  • Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

    I have tried all the resets, the firmware is the latest version, the green light is on.
    But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
    Any ideas?

    Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
    Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
    Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
    Reset the TC again.. sorry.. !! You're welcome ... done.
    Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
    You need to open the network preferences to find out. Yep - that's good ...
    ****** I then reconnect the TC WAN to the router - is this right?
    And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
    The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
    Then open the airport utility and you should be able to setup the TC.
    Do as little setup as possible and then run the TM backup and see how it goes.
    I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
    So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
    I named network RFG, named device RFGTC.  RFG network shown as IP 192.168.0.72
    Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
    I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link.  All are effectively connected to the BT Homehub - is there a conflict there?
    Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
    And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • An error occurred while creating a Page Server subprocess.

    I am using XI R2 SP5 on solaris.
    When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
    An error occurred while creating a Page Server subprocess.
    I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
    Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

    checked this SAP Note?
    1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
    Symptom
    When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
    "The Page Server is unable to create a child process"
    In the syslogs, you see the following error messages:
    "An error occurred while creating a Page Server subprocess."
    "The function PEOpenEngineEx failed. Reason: Report engine not opened."
    "Internal error for dll procreport."
    "Unable to load dll procreport."
    "Internal Job Server error."
    Cause
    The following file in the MainWin registry has become corrupt:
    bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
    This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
    Resolution
    Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

  • A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

    Need help.  I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client.  It just prompts for password but will not
    take it. I'm sseeing this on my front end server multiple times:
    A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
    Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
    All my certs are good coming from internal CA.  My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers.  Issue only occurs when trying to connect using a lync 2013 client.
    1 Login: FAIL (hr = 0x1) 
    this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
    1.1 Get-NewWebTicket: FAIL (hr = 0x1) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
    1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
    1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    Executing wws method with windows auth auth, asyncContext=0A4FC348,
     context: WebRequest context@ :173931816
      MethodType:4
      ExecutionComplete? :1
      Callback@ :0A5A1864
      AsyncHResult:80f10041
      TargetUri:https://domain.com/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
     Error:
    There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
    The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
    The requested resource requires user authentication.
    1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000) 
    CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
    Rich

    Hi,
    Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
    For the detailed IIS configuration, please check:
    http://technet.microsoft.com/en-us/library/gg412871.aspx
    As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
    lyncdiscoverinternal.<sipdomain> Host (A) record and then
    lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
    More details:
    http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • HT3275 I continue to get the following error message: Unable to complete back up.an error occurred while creating backup folder. It's a brand new drive. When I attempt to repair it using disk utility I get:unable to repair disk cannot unmounted

    I have been trying to use time machine on a new lacie 2tb usb 2 drive for back up. I continue to get: "unable to complete backup.An error occured while creating backup folder". When I use disk utility to repair I get another error message: unable to repair disk unmountable.
    Help me Obie One Canobie you are my last hope

    I have confused myself with the facts!  Started out keeping track of every step and every variable but have sort of lost it as we progress here.  First I quit all applications then swapped connections between mouse port and backup disk port to influence possible bad connections question.  Changed power outlet receptacle for the backup disk. Disabled the put-the-HD-to-sleep option.  Then powered down the computerator.
    Next started up computerator.  Turned Time Machine ON  and experienced multiple successful backups!  Then I started up a few applications, Mail and Text Edit (but not Safari so far).  Had a few more successes.  After each backup, I used Disk Utility to verify the backup disk is still OK.  This because the error about unable to unmount the backup disk seems to go hand in hand with Disk Utility finding the backup disk to be bad.
    Put computer to sleep for the night.  Upon starting up in the morning, and before doing anything else, I did a backup disk verification... BAD!   Did a restart and verified the backup disk... OK.
    Did a few    Sleep-bad, Restart -OK    repetitions.
    It seems consistent:  Sleeping the computer apparently messes up the backup disk but doing a Restart "repairs" it.
    =============================
    Now then, I don't understand everything I know here.  Methinks that maybe keeping the HD from sleeping during lulls in activity has allowed successful backups through the day but manually putting everything to sleep for the night causes a return to the problem of spinning-back-up-too-slowly (which was explained earlier).  Is there any truth in this?
    I may abandon this Seagate thing for something more compatible.  What's out there that we know works reliably for us?

  • BO CMC Crystal Reports : An error occurred while creating a subprocess in the processing server. [RCIRAS0603]

    Hi All,
    I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]"  error while opening the previous instances of the crystal report in BOCMC.
    I am trying to run or schedule the report but it is always going to "PENDING STATUS".
    (Previously it was resolved after restarting the server. Error : problem in ProcessingServer)
    Could you please suggest.
    Details :
    Crystal Reports 2008
    Clarity 13
    Server Details:
    BO XI 3.1 SP5
    OS : Red Hat 6
    Patch X11
    Symptom
    " Crystal Reports 2008/2011/2013 Processing Server fails to create child
    processes after applied X11 client libraries security update on Redhat
    Linux 6
    " "An error occurred while creating a subprocess in the processing server.
    [RCIRAS0603]" error occurs when viewing the Crystal Reports in InfoView/BI

    Hi Rajeev,
    This is a known issue you can refer to below note,
    2098659 - "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error occurs after applied X11 client libraries security update on Redhat Linux 6
    Regards,
    ~Shree

  • An error occurred while creating a subprocess in the processing server.

    Hi,
    I have developed a Crystal Report using CR 2008 with SAP BW as the datasource. The report is executing fine in CR 2008, but when saved to the BOE, in Infoview it is throwing the following error:
    An error occurred while creating a subprocess in the processing server. [RCIRAS0603]
    Did anyone face similar issue? Is there any resolution for the same.?
    I have deleted the report from enterprise and saved it back, still facing this problem.
    Appreciate your help in this regard.
    Thanks
    Ravi

    Crystal Reports processing (CR Page) server is not operational.
    There could be many reasons for this.
    CR processing server traces will need to be enabled and analysed by support.
    You should also be on the latest patch release.
    Sometimes following steps help :
    1) Stop all of the XI 3.1 processes using the ./stopservers command (ensure they are all down before proceeding)
    2) Once all processes are stopped ensure the serverpids directory is empty
    <install dir>/bobje/serverpids/
    If any files are within the 'serverpids' folder, remove them.
    3) Go to bobje/tmp
    Remove any MW, .MW, mw, .mw and regss files and/or directories
    4) Go to /tmp
    Remove any MW, .MW, mw, .mw, and regss files and/or directories
    5) start servers back up.
    If this doesn't help - you'll need to open a Support Incident

  • HT3275 I get the following message - "Time Machine could not complete the backup."  "Unable to complete backup."  "An error occurred while creating the backup folder.""

    I get the following message - "Time Machine could not complete the backup."  "Unable to complete backup. An error occurred while creating the backup folder."" 
    This MAC is partioned with Windows 7 with only  50 gig devoted to Windows so my son can play Flight Simulator X on the machine. 
    I have a WD Passport External Hard Drive for the Back Up
    I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message.  Any thought?
    Maxx

    Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
    You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
    Reset the TM to the new name.. use the A4 in Pondini's great KB.
    http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for