"An unknown error occurred while moving a photo" - LR 2.0 on Mac
Lately, I've been seeing this error message with some regularity. It appears whenever I move photos containing a psd file. The scenario is as follows: I have started to use the 'edit in CS3' function to use the Silver Efex Pro plugin. I then save the image as a PSD and it shows up in LR2. However, when I move photos from the folder to which they are imported in LR2 to their final destination (on an external), I receive this error message. I am able to move all CR2 files without a problem. When I check the folders in Finder, I see that the files have been moved to the correct directory despite this error message. I then have to run the sync command on the target directory to get the files to show up and I promptly remove them from the source directory. Anyone else seeing similar error messages? I'm thinking of trying LR 2.1 RC1 to see if this resolves the issue.
E
I am getting this error whilst attempting to move NEF (Nikon RAW files) either between folders on the same hard-drive or between hard-drives (which are incorporated into my Lightroom catalogue).
Whenever I receive this error, a strange (locked) file appears in the directory/folder to which I intended to move the file and on examining this file in the terminal I can see that it contains the following error message: "cannot execute binary file...logout". The filename of this strange file is usually very random such as 470F00FF-9FBC-4517-84BF-26E52251B2B9-449-0000020C6A4DD5FD
I do not have any problems with missing sidecars and always select "save metadata to files" before attempting to move the files...can anyone figure this out?
Similar Messages
-
An unknown error occurred while using remote from iPhone to iTunes on Mac
I have STF for this answer, but am probably using the wrong words. I have an iPhone 3Gs with a remote app on it. I have several things going on.
I have a mini-mac running iTunes 10.4. This computer runs both my music for the house as well as my Apple TV. When I use the Remote App lately for playing and controling music, and I tap on a song within an album, I get this error. "An unknown error occurred. Please check your library and try again". I am having miserable luck (basically no luck) finding or playing the music in my iTunes.
Then an error pops up after this. "Remote can't connect to your iTunes library. Check your network settings and try again."
Recently (about 5-6 days ago), my Network Gateway crashed. This was a Linux box running Gateway software. (ClarkConnect). Since the disk was hosed, I replaced it with a fairly new (8-10 month old) Apple Airport Extreme (version 7.5.2). I have set this up to port forward and dispense DHCP within my house and wireless network. Is it possible that something needs to be set additionally on this to allow remote connections to iTunes from my iPhone. I should also say that my iPad does this just fine using the same Remote App.I am getting this error whilst attempting to move NEF (Nikon RAW files) either between folders on the same hard-drive or between hard-drives (which are incorporated into my Lightroom catalogue).
Whenever I receive this error, a strange (locked) file appears in the directory/folder to which I intended to move the file and on examining this file in the terminal I can see that it contains the following error message: "cannot execute binary file...logout". The filename of this strange file is usually very random such as 470F00FF-9FBC-4517-84BF-26E52251B2B9-449-0000020C6A4DD5FD
I do not have any problems with missing sidecars and always select "save metadata to files" before attempting to move the files...can anyone figure this out? -
There is a problem i keep on getting this error
"An unknown error occured while resoting back up" I am using latest itunes 11.1
I have backup file from my previous phone 3GS (PC-1)
Now I am restoring the same file to my new iphone 5 (PC-2)
I copied the backup file to the right location and itunes had picked up the file on at last moment it gave error (mentioned above)
Any solution will be really appreciated, thanksor... put your photos in "My Pictures" in My Documents, and viola, itunes syncs it to the iphone. only one sentence needed =/
maybe im missing your point here, the long paragraph is mindboggling -
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
-
Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please VoteHi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019 -
sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.
Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
VLD-0917: An unknown error occured while generating FACT
I'm trying to move my OWB repository from machine_1 to machine_2 this is what I did:
1. Export of the OWB metadata for the entire project. (machine_1)
2. Import of the OWB project in machine_2, import is successfull.
3. Configure locations for the source/target schemas (double, triple checked)
4. deploy the objects...
Here comes the problem: all tables referencing shared tables from other locations (i.e. modules), fail to generate with error
VLD-0917: An unknown error occured while generating FACT.
An unknown error occurred while generating FACT.
Error details: java.lang.NullPointerException.
following is the Design Center client log for the error:
**** Exception when generating ****
java.lang.NullPointerException
at oracle.wh.repos.sdk.environment.WBEnvironmentHelper.getDbLinkName(WBEnvironmentHelper.java:775)
at oracle.wh.service.impl.generation.common.WBGenerationUtils.isSameInstance(WBGenerationUtils.java:355)
at oracle.wh.service.impl.generation.ddl.TableGenerator.getMapSchemaName(TableGenerator.java:914)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKey(TableGenerator.java:1047)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generateForeignKeys(TableGenerator.java:894)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generatePhysical(TableGenerator.java:612)
at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:463)
at oracle.wh.service.impl.generation.ddl.TableGenerator.generate(TableGenerator.java:145)
at oracle.wh.service.impl.generation.ddl.DDLGenCommon.generate(DDLGenCommon.java:306)
at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generateAUX(DDLGeneratorManager.java:186)
at oracle.wh.service.impl.generation.ddl.DDLGeneratorManager.generate(DDLGeneratorManager.java:101)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:423)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Even more, this happens when I create a new FACT and a new shared table (located in another location) so it isn't the repository metadata being imported. If I remove the constrainsts referencing tables in other schemas then deployment is successfull.
Repository resides in an oracle database 10g r2 and OWB is 10.2.0.3 running on a cluster machine with AIX 5...
Any ideas how to solve this or a possible workaround?
Thanks,
GermanHi,
I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
Any idea what might be happening here?
Best Regards,
--oswaldo.
[osantos] -
VLD-0917 - unknown error occured while generating (OWB10R2)
I have two cubes which I'm trying to drop via the control center, so that I might add a new version with a new dimension. However, when I try deploying the drop, I get the "VLD-0917 - unknown error occured while generating <cubename>" together with:
An unknown error occurred while generating <cubename>. Error details: java.lang.NullPointerException.
Any ideas?
edHi,
I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
Any idea what might be happening here?
Best Regards,
--oswaldo.
[osantos] -
Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
"An unknown error occurred while trying to start the collection process."
I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.Hi,
This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
and Team Foundation Server.
You have problems when using Concurrency Visualizer Extension, please ask in
the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
CRS 5 Backups fail with this error: Unknown error occured while connecting to the host
Dear All,
We have backup issue with UCCX 5.0(2)SR03_Build317, while trying to take backup giving following error "Unknown error occurred while connecting to the host".
I have found the solution in the Cisco and tried all the suggestion, still not working and same error observed. Due to backup issue we unable to do any changes on the CRS, when we try to create new agents, those agents are not reflecting in the CRS.
Also I have observed bellow error , when try to re-sync the JTAPI,
Error while handling the input request.
Top of Form
Config Changes are not allowed during 'Backup' operation, which was started by 'Scheduler' at 'Fri Jun 08 18:00:03 GMT+08:00 2012 '. Please try again after 'Backup' is complete.
Bottom of Form
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00809a752c.shtml
Solution
Complete these steps in order to resolve this issue:
•1. Access the UCCX server and navigate to Start > Run, and type CET.
•2. When the warning message appears, click NO.
•3. Choose com.cisco.crs.cluster.config.ArchiveAdminConfig.
•4. On the right side, double-click the record ID.
•5. Click the com.cisco.crs.cluster.config.ArchiveAdminConfig tab, and clear the password under Backup Storage.
•6. Click Apply.
•7. Navigate to Appadmin > Tools > Backup and Restore.
•8. Under Backup Storage Location, type the new password, and click Update.
After you complete these steps, you can run the backup. If the backup fails, restart the server, and try the backup again. If the backup still fails, you can navigate to CET, clear all the fields, and then type the new information for the storage location.
Please help me with your suggestions.
Thanks & Regards,
Naveen .SPlease any one help me on this issue..
-
I am not able to run Report in Report viewer due to the below error:
Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer
This report works fine in SSRS tool. but after i deployed into sharepoint 2013 site, it throws error.
Please advise what needs to be done
Any help is really appreciated.
Thanks,
SPHi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
HT201077 An error occurred while joining this photo stream. Please try again later.
Why am I getting this error message? An error occurred while joining this photo stream. Please try again later.
Welcome to the Apple Community.
Have you tried again later. Have you asked the owner if they can access the photos. -
Can't delete certain emails from Mail. Instead, I get the message "An error occurred while moving messages to the mailbox, etc." The problem appears randomly.
I had the same problem, and it was solved by going to the Mailbox menu and selecting "rebuild."
Maybe you are looking for
-
When ever you create an event how can you create folders inside the event for different folders of b-roll? The reason why I ask is becuase when you create events, there becomes way too many events making a clutter. I have tried to cut, copy, import
-
"not enough memory to place file" in CS3 - Huh??
Can't seem to find anything about this anywhere. User is trying to place PSD file into an AI document. When he does this, a dialog box pops up asking him which way he wants it placed (as an object or flatten document). When he chooses either option,
-
Replicate Table with spatial columns
I'd like to know how to replicate (updatable snapshot) a table with spatial columns. when i try to create a master repobject i've got ORA-23318 error. What can i do? null
-
Not able to execute interface in ODI
Hi Experts, I have configured J2ee agent and it got succeeded. When I try to execute interface from designer it is throwing following error. com.sunopsis.core.SnpsInexistantSchemaException: SnpLSchema.getLSchemaByName(): SnpLschema does not exist
-
Swing scroll pane is not visble
hi i am trying to add a Jtree is swingscrollpane. the tree is visible but scroll bar is not visible even if it is expanded and node is overflow. ;ease send me a sample code. thanks and egards