An unknown error occurred while using remote from iPhone to iTunes on Mac

I have STF for this answer, but am probably using the wrong words.  I have an iPhone 3Gs with a remote app on it.  I have several things going on.
I have a mini-mac running iTunes 10.4.  This computer runs both my music for the house as well as my Apple TV.  When I use the Remote App lately for playing and controling music, and I tap on a song within an album, I get this error.  "An unknown error occurred.  Please check your library and try again".  I am having miserable luck (basically no luck) finding or playing the music in my iTunes.
Then an error pops up after this.  "Remote can't connect to your iTunes library.  Check your network settings and try again."
Recently (about 5-6 days ago), my Network Gateway crashed.  This was a Linux box running Gateway software. (ClarkConnect).  Since the disk was hosed, I replaced it with a fairly new (8-10 month old) Apple Airport Extreme (version 7.5.2).  I have set this up to port forward and dispense DHCP within my house and wireless network.  Is it possible that something needs to be set additionally on this to allow remote connections to iTunes from my iPhone.  I should also say that my iPad does this just fine using the same Remote App.

I am getting this error whilst attempting to move NEF (Nikon RAW files) either between folders on the same hard-drive or between hard-drives (which are incorporated into my Lightroom catalogue).
Whenever I receive this error, a strange (locked) file appears in the directory/folder to which I intended to move the file and on examining this file in the terminal I can see that it contains the following error message: "cannot execute binary file...logout". The filename of this strange file is usually very random such as 470F00FF-9FBC-4517-84BF-26E52251B2B9-449-0000020C6A4DD5FD
I do not have any problems with missing sidecars and always select "save metadata to files" before attempting to move the files...can anyone figure this out?

Similar Messages

  • "An unknown error occurred while moving a photo" - LR 2.0 on Mac

    Lately, I've been seeing this error message with some regularity. It appears whenever I move photos containing a psd file. The scenario is as follows: I have started to use the 'edit in CS3' function to use the Silver Efex Pro plugin. I then save the image as a PSD and it shows up in LR2. However, when I move photos from the folder to which they are imported in LR2 to their final destination (on an external), I receive this error message. I am able to move all CR2 files without a problem. When I check the folders in Finder, I see that the files have been moved to the correct directory despite this error message. I then have to run the sync command on the target directory to get the files to show up and I promptly remove them from the source directory. Anyone else seeing similar error messages? I'm thinking of trying LR 2.1 RC1 to see if this resolves the issue.
    E

    I am getting this error whilst attempting to move NEF (Nikon RAW files) either between folders on the same hard-drive or between hard-drives (which are incorporated into my Lightroom catalogue).
    Whenever I receive this error, a strange (locked) file appears in the directory/folder to which I intended to move the file and on examining this file in the terminal I can see that it contains the following error message: "cannot execute binary file...logout". The filename of this strange file is usually very random such as 470F00FF-9FBC-4517-84BF-26E52251B2B9-449-0000020C6A4DD5FD
    I do not have any problems with missing sidecars and always select "save metadata to files" before attempting to move the files...can anyone figure this out?

  • Unknown error occurs when I connect my iphone to itunes for the first time, what does that mean

    Everytime I connect my iphone to my laptop and start up itnes get an error messaage stating that an error has occurred and my phone can not be read

    Read here:
    http://support.apple.com/kb/ht1207

  • An unknown error occured while printing (from Firefox)

    When I try to print from web page I get a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a WordPerfect document, I can print a copy. This issue just started 2 or 3 weeks ago; I have not encountered this problem prior to this week. Please advise.

    @sklein65
    I thank you for your reply. My problem occurred when trying to print to the XPS printer, I found, that, if I disabled the UAC, the problem went away. You may want to give this a try. You can access you UAC by entering 'UAC' in the Window's Search Box. I had an additional problem with my 'Pinned' websites becoming unusable, I traced this down to Firefox version 24 (beta channel). I reverted back to v23.0 and I never had the problem, again. Note, that, all versions of v23.0 worked, the problem occurred when v24 was installed. I disabled all auto updating in Firefox.

  • Unknown error occured, While I restore my backup of 3GS taken from differenct pc to iphone 5 on other machine, please tell me any resolution

    There is a problem i keep on getting this error
    "An unknown error occured while resoting back up" I am using latest itunes 11.1
    I have backup file from my previous phone 3GS (PC-1)
    Now I am restoring the same file to my new iphone 5 (PC-2)
    I copied the backup file to the right location and itunes had picked up the file on at last moment it gave error (mentioned above)
    Any solution will be really appreciated, thanks

    or... put your photos in "My Pictures" in My Documents, and viola, itunes syncs it to the iphone. only one sentence needed =/
    maybe im missing your point here, the long paragraph is mindboggling

  • I cannot print from Firefox, keep getting "an unknown error occurred while printing."

    Whenever I attempt to print something from Firefox (email, receipt, and so on), printing fails and I get the message "an unknown error occurred while printing." Printing from Internet Explorer works without any problem.

    I came across the same problem today, also using a 2600N. Window updated the drivers through a Windows update yesterday, so I suspect that's what caused the problem since it was working fine before.
    I tried the reset in about:config and that didn't do jack, but I was able to solve it by removing the printer with device manager and then disconnecting it from my PC, plugging it back in, and letting Windows reconfigure it automatically. It works now.
    Good luck

  • SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

    Hi All,
    I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
    in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
    Any clue why it is happening.
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi All,
    Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing. 
    Once I cleared the space, report started working and above error was not displaying. 
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

    When I run the report on production I got the following error message:
    Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
    request on the server. The status code returned from the server was: 12019
    It hasn’t happen on Dev and Test before.                           
    I googled, The error is described as:
    12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
    The requested operation cannot be carried out because the
    handle supplied is not in the correct state.
    But I cannot find the solution for that. 
    Has it happend to you before? How to solve that?      

    Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
    Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
    code returned from the server was: 12019

  • Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

    sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

    Hi SP,
    Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
    http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
    http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
    http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
    If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer

    I am not able to run Report in Report viewer due to the below error:
    Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer
    This report works fine in SSRS tool. but after i deployed into sharepoint 2013 site, it throws error.
    Please advise what needs to be done
    Any help is really appreciated.
    Thanks,
    SP

    Hi SP,
    Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
    http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
    http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
    http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
    If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • "An error occurred while extracting files from the package "BaseSystem.pkg".

    Hello!
    I have a
    MacBookPro5,5
    Prozessortyp:Intel Core 2 Duo
    Prozessorgeschwindigkeit:2.26 GHz
    Anzahl der Prozessoren:1
    Gesamtzahl der Kerne:2
    L2-Cache:3 MB
    Speicher:2 GB
    Busgeschwindigkeit:1.07 GHz
    Boot-ROM-Version:MBP55.00AC.B03
    SMC-Version (System):1.47f2
    Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
    Problem:
    I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
    Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
    Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
    Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n    NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n    NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n    PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
    Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
    Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
    Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
    Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
    Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation:   139 MB wired,   259 MB trapped,   397 MB active,     7 MB inactive,  1246 MB free,  1650 MB usable,  2048 MB total

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • Error occurred while downloading files from Administration Server...

    Hi guys,
    If i already have my application deployed and exploded in ../tmp/_WL_user , when I restart the managed server it will try to download again the files from the upload directory in the Administration Servers? (I'm using stage mode).
    Sometimes I got the following error:
    Caused By: java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from Administration Server for deployment request "0". Underlying error is: "null"
    and I already have the war exploded in /tmp/_WL_user
    the staging mode is not only for the first deployment? when i don't have the war exploded in /tmp/_WL_user?
    I've some confusion related to the process or deployment/startup of the managed servers.
    Thanks

    Hi,
    when you get following error * DeploymentService:290066 * then that means
    A service on the machine is preventing the WebLogic Server remote instance from downloading the configuration file. This can be Hosts Intrusion Prevention (HIPS) agents or any other agent causing this issue.
    Disable the agent interfering with the download process to fix this issue.
    Regards,
    Kal

  • 1018"an unknown error occurred while printing"

    HP1018
    Windows 7 64-bit
    Print test works ok, prints from OpenOffice and some other applications.
    However, from Adobe Reader X 10.1.6 nothing happens after clicking on the print dialog button. I have also tried "Print as Image," and there is no response from that either.
    Firefox 18.02 returned "Printer Error: An unknown error occurred while printing."
    I have also updated the driver to "lj1018_1020_1022-HB-pnp-win64-en.exe" which installed identifying itself as a "1020 Series".
    That install appeared to install correctly, and the above applications which _could_ print before can still print ok, but the same problem occurs with Adobe Reader X 10.1.6, with not repsonse after successfully using print dialog, both regular and "print as image", and same error, "Printer Error: An unknown error occurred while printing," is returned from Firefox 19.0
    Barry

    It sounds like there's a compatibility problem.  You might try a different reader.  Here's a link to a PDF reader that is similar to Adobe.  Click Here  You might try another browser such as Chrome.  
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

Maybe you are looking for