Analog audio to ipod

I have successfully transfered analog audio (reel to reel) to mp3 files and have heard them on my computer in I-toons, however when i transfer them to my video i-pod, although they list, they will not play. any thoughts??

Try converting the files to the AAC format and see if that does the trick.
Ben

Similar Messages

Optical Audio - Analog Audio Adapter?

I have been thinking for a while about buying an Apple TV.
One of the main reasons I want an Apple TV is for streaming music through the Apple TV into my stereo system WITHOUT having the TV turned on.
So this means I need to use the Optical Audio port to go straight into the stereo.
I have a Kenwood XD-551 stereo system which is reasonably old and only has Analog Audio input. That means I can't connect an Apple TV to the stereo using an optical audio cable. Is there an adapter I can buy that connects Optical Audio to Analog Audio?
I know I can stream music to the speakers through an AirPort Express (I have a 3.5mm to Analog cable), but I want an Apple TV also to stream HD Movies and TV Shows from iTunes, as well as AirPlay Mirroring from my iPod Touch.
My current set up:
TV --- 3.5mm jack to Analog Audio Input --- Stereo
My intended setup:
Apple TV --- HDMI --- TV
Apple TV --- Optical Audio to Analog Audio Input --- Stereo
I REALLY NEED A SOLUTION TO THIS OR ELSE I MAY NOT END UP BUYING AN APPLE TV

I am also looking for a exactly a similar setup.
streaming music through the Apple TV into my stereo system WITHOUT having the TV turned on
@alexei Ok, so this solution works with you. just to understand the setup,
you connected the apple tv's 'optical digital-audio port' to a DAC using which kind of cable ? links from amazon or other websites will be very useful.
Output from this DAC, you connected to the speaker via 3.5mm jack, correct? again a cable name (both ends) will be extreemly helpful.
With this when you airplayed music on 'apple tv' via itunes just the audio played on your speaker, correct? assuming your TV turned off during the music play.
And when you airplayed video/movies on 'apple tv' it automatically played on your TV.
Just wanted to know, you see only one airplay configured on your iphone/ipad correct ?
If this exact setup works with you..then bingo..I can go ahead buy all those stuff. If you have a different set-up with which you play music and video sepeartely using apple tv then please do share..
Your answers to these quesions will help me to decide if I need to buy Apple TV for music(which is equally important) and watching movies. And the invetsment dosent stop there..therz DAC and cables.
Thanks!
PS: I know I can stream music to the speakers through an AirPort Express, but want to go for apple tv.

No output sound from output port/analog audio: Need help

hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.

I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
i hope this works for you. good luck and have a good new year.

Apple TV2 missing analog audio output for multi-zone system

Found out the hard way that most receivers can't support digital audio in multiple zones (i.e., Zone 2). Since Apple TV2 (ATV2) dispensed with any analog output, if you have a whole-house system that depends on mult-zone to distribute audio to various speakers, you won't be able to use ATV2 to stream music to anything other than Zone 1. The only outputs are HDMI and optical (both digital audio). I think I found a work around (which, of course costs more money) which is a "de-embedding" device from Atlona that takes HDMI in and splits out the audio to analog and passes the HDMI through to the receiver. The analog audio output then lets me connect to the analog in on the receiver so it can stream to all zones. I figure Apple just didn't have enough real estate on the new product to make room for analog, but it's a pain. Hope this helps someone. If anyone knows a better work-around, I'd love to hear it.

I have the same issue with a MacMini I use for music. My solution was to use an inexpensive optical splitter - one feed to the optical input of my receiver and the second to a DAC. Then run standard RCA audio cables from the DAC to the analog Zone 2 inputs.
Here is a link for a DAC
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042302&pid=6884&seq=1&format=2
They should have the splitter as well.

No audio on ipod touch 4th generation when recording videos

no audio on ipod touch 4th generation when recording videos

Does the Voice Memos app work? It has a VU meter to show recording level.
Is the microphone hole clear? It is the hole on the backside of the iPod by the camera lens.
Did it ever work?

AppleTV audio out to old amp with only analog audio

I'm thinking about getting the Apple TV for both video and for playing my music on my home stereo system. I currently have an old amp with only analog audio capabilities, but the new ATV looks like it only supports digital optical out, and the digital to analog converters I've looked for seem pretty expensive. How can I get the audio from my music collection (iTunes) to play wirelessly through ATV through my amp?
I currently also have an Airport Express which I use for audio, but I was thinking of selling that and just using the ATV since the ATV can essentially do the same thing as the AX with added video benefit. I've seen some threads on streaming audio from the ATV to the AX, but do I really need both? Seems like there should be another way.
I was thinking of connecting the ATV to my TV via HDMI cable for audio, and then using an analog audio out from the TV to my amp. But, if I'm correct, that would only provide me with sound coming from the TV. It wouldn't give sound out from iTunes, for example. Is that right?
Are there any other options?

Followings are my observations in audio streaming with Apple TV 3 and Airport Express through AirPlay protocol:
-- Apple TV 3 come with only digital audio outputs through HDMI and optical SPDIF outputs. If you connect optical link from the optical output to optical input of any DAC and HDMI cable from the HDMI output to HDMI input on TV set, audio output will be transmitted through both digital outputs. Thus is is not necessary to turn on TV set unless visual feedback is required. There is no audio analog line output for Apple TV 3.
-- AirportExpress come with single combo mini jack (digital + analog) for audio output regardless of old/new models. You can connect either digital optical link (with Mini/Toslink adaptor) to digital input of DAC or analog line cable (inferior) to analog line input of amplifier. When analog line is used, digital-to-analog conversion is done by DAC built into AirportExpress for which do not expect quality is as good as most external DAC models. What do you expect from a single-chip DAC implementation vs standalone DAC models cost few thousand dollars ? Moreover analog line is susceptible to interference more than digital line.
So the decision to use Apple TV or AirportExpress, analog or digital transmission for audio streaming depends on whether you need WiFi base station features of AirportExpress to establish wireless network and quality of your audio system to justify all-digital audio transmission. Followings are what I use in audio streaming from iMac/iPad mini /iPhone 5 to audio system in living room. Quality of audio output is comparable with Sonos Zone Player as audio source.
Apple AirPort Extreme wireless base station (802.11n, 5GHz)
Apple TV 3 (firmware 5.1.1, Xtreme HD Toslink optical cable)
Antelope Audio Zodiac DAC
Bel Canto power amplifier
Bowers & Wilkins 683 speakers
Yamaha YST-SW215 subwoofer

Splitting front & back panel analog audio

Hello,
I'm new to arch linux, and I'm trying to reproduce what I was doing using Windows: I have my headphones and my speakers always connected to my computer, and I switched output "by the OS" whenever I wanted to.
Here, in arch linux, I see I have (in gnome sound panel) the two analog outputs I'd like to switch to when necessary: headphones and line-out.
However, both of them seem to output audio only to headphones.
I've tried different things:
- If I remove Auto-Mute, I can have the audio output on both front and back panel. However, if I re-enable it, I just have front panel analog audio
- I've tried this, without impact: https://wiki.archlinux.org/index.php/Pu … ont.2Frear
I guess it's not a real problem with pulse audio but more with drivers. However, I don't know how to fix it.
Would profiles help? http://www.freedesktop.org/wiki/Softwar … /Profiles/
I doubt it, but if it's the way to go, I'd like to learn about it.
Here is info about my hardware:
http://pastebin.com/gnpw0bF4
And about my pulse audio sinks:
http://pastebin.com/zaeS0KD5
Last edited by evjp (2014-10-03 08:23:56)

MSC wrote:Based on your description, I assume your speakers are plugged in to the back panel and your headphones are plugged in to the front? And you're trying to get output to one or the other, but not both?
Indeed, they are both plugged at the same time, and I want to select my "unique" output.
MSC wrote:One thing you could try is muting the headphone output before switching to line out in PulseAudio, or vice versa. See also if you can control the volume independently - can you turn the headphone volume all the way down without also silencing the speakers?
I can't control them independently. Turning the volume down for headphones silences the speakers.
MSC wrote: Failing that, is auto-mute the only setting your card provides, or are there others? IIRC Gnome hides a lot of switches by default; you can see the full list of settings by running alsamixer in a terminal. You should also look over the ALSA page on the wiki if you haven't already. My guess is that it's not an issue with the hardware itself, but rather some setting that needs to be toggled.
I don't see much more in alsamixer... I've tried toggling everything up/down, the only way to output on the speakers (back panel) is to switch Auto-Mute on/off.
In the alsa page, I only see that part as relevant: https://wiki.archlinux.org/index.php/AL … g_speakers However, it's for HDMI, which is not the case here.
Maybe changing alsa model?
I'm kinda lost...

Analog audio to optical connection

I am trying to connect an analog Bose Cinemate home theater system to my new HDTV. The TV does not have an analog audio in, only a SPDIF (optical) in connection. Is there a way to convert the analog to the optical connection? I was told there is a converter for that, but I have not found one. Thanks for your help.

You should be looking for outputs on your TV, not inputs, as all TVs have analog inputs.
Please post the make and model of your TV set.
Disclosure: Former BBY employee.

PulseAudio doesn't recognize analog audio plug

One day pulseaudio just stopped recognizing my analog output jack, It only lists my hdmi audio out and nothing else.
>>> list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9050
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 19.81 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfbbbc000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa50"
device.product.name = "Cypress HDMI Audio [Radeon HD 5800 Series]"
device.string = "hdmi:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100200"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
active port: <hdmi-output-0>
I should also note that this problem is exclusive to pulseaudio. When I use regular alsa everything works.
How do I make PulseAudio recognize my headphones again?

Well that is the problem, When I use pulseaudio (I just reinstalled it) It ignores the analog audio port completely and doesn't list it anywhere.
Not in pacmd list-cards:
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfbbbc000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa50"
device.product.name = "Cypress HDMI Audio [Radeon HD 5800 Series]"
device.string = "1"
device.description = "Cypress HDMI Audio [Radeon HD 5800 Series]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_00.1.hdmi-stereo/#2: Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#2: Monitor of Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
and not in pavucontrol.
It's definitely not a hardware issue, The card is recognized and functioning when using alsa.

The old Apple TV had a port for Analog the new one does not. Where do I find a (TosLink), Optical to Analog Audio for the Optical Output on the Apple TV so I can run my Analog outside speakers?

Where do I find a TosLink, Optical to Analog Audio for the Optical Output on the Apple TV 2?

click here for information.

How to import analog audio into garage band

I have an iMac with 2.5 GHz Intel Core 5i 8 GB memory OSX 10.7.5 and I am trying to import analog audio from a reel to reel tape deck so I can edit it and burn to a CD. I have a elgato video capture device with RCA female plugs on one side and USB on the other. (I've used this device to import analog video and audio to iMovie and Adobe Premiere Elements). I am told that I could import analog audio to Garage Band to edit and burn , however when I launch Garage Band I am not sure what part of the program I should be selecting and how to go about importing the analog audio. Any help would be greatly appreciated.
Teddy

teddyfromhauppauge wrote:
I am not sure what part of the program I should be selecting
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)
teddyfromhauppauge wrote:
how to go about importing recording the analog audio.
http://www.bulletsandbones.com/GB/GBFAQ.html#recordusingaudiointerface
(Let the page FULLY load. The link to your answer is at the top of your screen)

Converting analog audio to MP3/WAV using Garageband

I'd like to use Garageband to convert analog audio (reel-to-reel, cassette, LP) to MP3/Wav formats. What kind of audio capture device do I need for the iMac in order to do this and where are they available?
I have a new iMac running Snow Leopard (MAC OS X 10.6.3); been using PCs for decades, but new to the Mac.
Thanks.

CEM156 wrote:
do you know if it matters whether I'm coming directly out of a deck/turntable, or do I need to go through an amplifier first before going into the audio-in port?
for a cassette or open reel, the line-OUT is fine, for a turntable you need the RIAA curve of a dedicated Phono input.
for more info read the tute on transferring LPs:
http://www.bulletsandbones.com/GB/Tutorials.html#allabouttransferringlps
note: read the caution about guitar amps, the same applies:
http://www.bulletsandbones.com/GB/GBFAQ.html#amplineout
(Let the page FULLY load. The link to your answer is at the top of your screen)

Mac Pro no analog audio input

The analog audio input on my Mac Pro has stopped working. Audio output still OK; USB audio input works fine but nothing from analog audio input.
I know it's getting a signal as I can send the mixer output to a Zoom H4n and it records fine, but I need it to go directly into the computer for tutorial voiceovers. I've tried recording in Quicktime Player, Soundtrack Pro, Camtasia and Screenflow.
I get no volume indication in the System Preferences>Sound panel.
I opened Apple Midi Setup>analog input and I can adjust volume on the two channels but "Master" is stuck at zero. Could this be the problem?

See if a smc reset shakes it loose.
Just to be clear here. Are you inputting into a program and expect to hear it as well? If so, then unless the program itself has some kind of audio playthru to the speakers you need a app like LineIn to handle that function.

Stereo line-level analog audio input?

The analog audio input on my machine seems to be mono only. If I put in a stereo line-level signal it just duplicates the left channel on the right. Is there any way to input a stereo line-level signal through this jack?
ALFRED GUZZETTI

The input source is a DV tape deck. At the head of finished tapes I record bars and tone. The first segment of the tone is on both channels. It is followed by tone on the left channel only, then the right channel only. When I monitor what the computer is getting either through headphones or direct the input to Soundtrack Pro, where the meters display left and right, I hear and see sound on both channels from both the stereo input and the left-channel input (which shows up on both channels in the computer). The right channel only input is not audible or visible on the meter. The computer has always been this way. I assumed, maybe wrongly, that the input uses a stereo jack since these are pretty universal, but that in effect, the input is mono.
Alfred Guzzetti
2.66gHz Mac Pro
OS 10.4.11

How to sync movies to as audio with iPod shuffle

how do you sync movies from itune as audio to iPod shuffle, any idea?

You can't sync movies with iPod shuffle because the obvious lack of display. You may be able to get only the audio by using software like AoA Audio Extractor. Here's a guide: http://www.addictivetips.com/windows-tips/how-to-extract-audio-from-movies-and-v ideo-files-easily/. Afterwards you may add the audio file by going to iTunes, then pressing Files, add files, then choose the file you want and it will be added to your music library.

Analog audio to ipod

Similar Messages

Maybe you are looking for