Analog outbound calls 1 ring pause then rings

have a an analog circuit. Put a butt set on port get one ring then long pause then rings through. thoughts?

Similar Messages

Lync 2011 for Mac with iMessage on OSX inbound and outbound calls fail

Running Office 14.4.9 updates and many before that. If you activate or deactivate an iMessage account using the built-in Messages application, Lync can no longer make or receive calls. Calls received will automatically go to voicemail.
Outbound calls just ring and ring. The phone setting in Lync were all three set to Lync as well.
The only way I've found them to work is to following the first instructions at the following link:
https://support.microsoft.com/en-us/kb/kbview/2691870?wa=wsignin1.0
Log on to your computer by using administrative credentials.
Exit Lync if it's running.
Drag the Lync application to the Trash.
To remove your existing Lync preferences, delete the following files:
Users/username/Library/Preferences/com.microsoft.Lync.plist
Users/username/Library/Preferences/ByHost/MicrosoftLyncRegistrationDB.xxxx.plist
Users/username/Library/Logs/Microsoft-Lync-x.log
If you activate or deactivate an iMessage account steps 1-4 must be performed, otherwise, phone calls fail. One additional annoyance I've noticed is that Lync tends to hand with a red X on the icon in the dock when this happens as well. You must
use the terminal and do 'pkill Lync' in order to close it.

Hi MSGuest,
Can you install the latest update and then check again ?
https://www.microsoft.com/en-us/download/details.aspx?id=36517
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT201401 When I receive a call my ring tone only sounds 40 seconds or less and then stops and disconnects the call. What can I do to solve this problem?. I lost a lot of calls because of that.

When I receive a call my ring tone only sounds 40 seconds or less and then stops and disconnects the call. What can I do to solve this problem?. I lost a lot of calls because of that.

Ring duration & voicemail are all controlled by your carrier. Your issue seems to be voicemail...doesn't appear to be setup on your phone. I'm not aware of any carrier that permits a cell phone to ring longer than 30 ~ 40 seconds, so that appears to be normal. Contact your carrier as it looks like your issue is voicemail.

When making an outgoing call, it rings once and then says 'Call failed' - any solutions?

When making an outgoing call, it rings once and then says 'Call failed' - any solutions?

I had the same problem!! I had to complain quite a few times to AT&T & found out I had to get the 3G MicroCell device. You also have to pay an extra $20 a month for it! You have to purchase it yourself($200)...which is a bunch of crap too!! But they can research your area & when they finally figure out that it's a bad servise area they will give it to you for FREE!! Now my phone works like it's supposed to!! So check it out!! Good Luck!!

My iphone turn blank.. When somebody calling it ringging but cant answer it. Coz no button to answer, its completely blank..

Help me.. My iphone totally blank. But when somebody call its ringging but i can not answer the call. Its blank.
When i press all the button arround iphone, it on but directly go to camera. Then i press home button it can not functioning. It just capture the camera.. Please help me..

Restart the phone. Hold the home button and the sleep/wake button together until the apple logo appears.

PSTN Caller no ring back tone when IPPhone is CallForwarded

CallManager version 4.1(3)SR with 6608 T1 blade. IPPhone is call forwarded to an external PSTN number. PSTN caller dials IPPHone DID number, Phone is forwarded to external number via 6608 T1 PRI, PSTN user hears no ring back. User most of the time hangs up. Any help would be great.

Hi John,
You could try changing this setting on the Callmanager Gateway config page (after hours);
Setup non-ISDN Progress Indicator IE Enable
Default leaves this setting disabled (unchecked).
Enable this setting only if users are not receiving ringback tones on outbound calls.
When this setting is enabled, the Cisco CallManager sends Q.931 Setup messages out digital (that is, non-H.323) gateways with the Progress Indicator field set to non-ISDN.
This message notifies the destination device that the Cisco CallManager gateway is non-ISDN and that the destination device should play in-band ringback.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed699.html#wp1311922
Hope this helps!
Rob
Please remember to rate helpful posts...........

TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

HT201401 My iphone would not ring with incoming calls, despite ring tone was set up?

My iphone would not ring with incoming call despite ring tone was set up using sound setting. In the beginning, it did ring. After a while it stops working. Any idea to make it work again?

Is the silent switch on the side of the iphone on?

Caller doesn't hear a ring back if the call is ringing on agent phone

Hi team,
can anybody help me? Here in Germany there are a lot of customers that don't understand why the caller doesn't hear a ring back when the call is ringing on agent phone for instance with UCCX 8. I read some discussions here for that issue but the only solution for that should be to change the MOH on CUCM. This is not a very good solution when the call in queue is set to hold he will hear the ring back tone in the queue as well :-(
Has anybody another solution for that issue???
All the discussion I've read was for IPCC version 4 or so. Is there another solution for this issue in version 8.x
In one discussion I found the following solution:
Yes, To resolve this issue,Set up a Send H225 User Info Message service parameter for Cisco CallManager service in CallManager. Perform the following steps:
In Cisco CallManager Administration, select Service > Service Parameter.
Select the correct server from the drop-down list.
Set the service to Cisco CallManager.
In the Send H225 User Info Message field, under the Cluster Wide Parameters (Device - H323) section, select H225 Info for Ring Back.
Reset the H.323 voice gateway.
After completing this procedure, the caller hears ring back when the agent phone is ringing.
Does it realy work?
Need you help!
Thanks in advance.
Tobias

Hi Tobais
you right one of the solutions is to change the MOH to the ring back one
however there are two types of MOH that you need to select
use MOH is the music to be played while the call on hold/ in queue
use Network MOH which is the oneyou need to change to the ring back MOH source file so when the call get transferred to an agent ring back MOH will be played
these options under the CTI ports in UCCX
also you can search the forum here and there are many discussions about this topic
HTH
if helpful Rate

How can I stop phone calls from ringing on my iPad?

When I receive a phone call it rings on my iPad. How can I shut that off?

Hello Clark Addison,
On your iPad, try going to Settings > FaceTime > and disable "iPhone Cellular Calls"
Thanks for using Apple Support Communities.
Best of luck,
Trent Rand

Cisco 3905 failed but outgoing call still ringing on mobile phone

Dear all,
We setup Cisco Call Manager 10 with Cisco Voice gateway 2911 ( E1 port) and 3905. All outgoing call & incoming call are ok. But we meet a small issue as below:
-Using 3905 do outgoing call to mobile number. Mobile number ringing.
-3905 failed without power but the call still ringing on mobile phone.
Anyway to fix that ?
Thank you & regards,
ThànhNT

Hello,
So, your config looks good.
Pelase, can you explain what you mean when you say:
"-3905 failed without power but the call still ringing on mobile phone."
You can try a "debug isdn q931" on your gateway and see if the disconnect is ok. Use the documentation bellow to understand the debug:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/debug/command/reference/122debug/dbfipx.html#wp1018126
If the disconnection is good, you will need to understand your call flow.
Phone -> CUCM -> Gateway -> PSTN -> Called Party
The final disconnection point is provided by your telco, and it can send the disconnect late.
Please, let me know the result of the debug.
best regards.

Face time incoming call not ringing. Why? Can anyone help?

Face time incoming call not ringing. Why? Can anyone help?

Do you have anything set in restrictions that might be causing this? Settings>General>Restrictions.

How do I quickly turn off the notifications in ios 5 but still allow the phone calls to ring.

I am trying to learn how to set my Iphone 4 with the ios 5 to silent but still allow the phone calls to ring aloud. At night, I do not want to hear emails and text messages come through, but if someone calls I would like my phone to ring and wake me up. Can this be done easily? I do not wish to go into each notification section and turn off and back on. Hopefully their is a quick set point that would allow all notifications to be turned off and still allow the phone itself to ring.

hi mtbomb,
hi Can you while the Power LED is blinking hold the power down don't let it go until the light disappeared.
Technically the Yoga13 should turn off while holding down the power. at least 10 to 15 sec.
I would suggest calling Technical Support if the above steps did not resolve the issue.
It's possible that when you turn on the system, it is not going to sleep but the blinking indicates failure.
Best regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1212 My Iphone 4S is showing a blank scree though a caller hears ring when he calls me.My phone is passcode protected and i am not able to syn it with itunes as it ask me to unloack my iphone .Any solutions??

My Iphone 4S is showing a blank scree though a caller hears ring when he calls me.My phone is passcode protected so i am not able to syn it with itunes as it ask me to unloack my iphone first .Any solutions??

try doping a hard reset. hold the lock and home button together for 10 secs or till the time apple logo appears. once logo appears release the keys and wait for phone to boot ... good luck

My daughter's phone calls are ringing on my phone... how do I fix this?

Hello... I am trying to figure out why my daughters phone call are ringing to my phone and how to fix it. Anyone have this happen before and do you have any suggestions>

Try looking at this if you are sharing the same Apple ID. http://osxdaily.com/2014/09/29/stop-other-devices-ringing-iphone-call/
Also consider setting up seperate Apple IDs and using Family Sharing instead.

Analog outbound calls 1 ring pause then rings

Similar Messages

Maybe you are looking for