Analog to digital question

So while I'm going through manuals etc, I figured I'd post here in case I can't find my answer in other places.
I have a Sony CCD-TRV68 Hi-8 camera and a Canon ZR70mc digital camera.
I've transferred from the hi8 to the dv through an s-video cable before without any problems.
When I do it now, it records and displays on my dv camera in black and white.
Don't think I pushed anything.
Any ideas on where to look or what to look for?
This kinda *****, because I love the warmth of my hi-8 camera and have been using it a lot recently.
Thanks,
Nate

Just wrangled up another cable.
That was the problem.
Just used it last night.
Hate when things crap out on you in less than a 24 hour turn around.
Thanks for your quick response.
Nate

Similar Messages

General analog to digital question

I bought this Pinnacle MovieBox DV product some time ago and am just getting around to using it. Thought at the time it would convert analog vhs and camcorder media to digital. My efforts so far have only included attempts at vhs conversion. Seems the video imports just fine but there is no audio.
My search of the forums hasn't produced much relevant info.
Do I have hardware or software issues - or - both maybe?
Anyone out there using Pinnacle's MovieBox DV?

Thank you
Now if I had an extra $300+ (this time of year).
If there's a means of getting this Pinnacle product to work ... I'ld prefer that for now. Wondering if the quality of the VCR/P could be an issue? Or if there's an audio setting I'm not using?
My searching of the forum indicated the possibility of down grading my system and iMovie versions to 10.3x and 4.0x respectively. Any info re this could be helpful.

MBP video out to TV using DVI - both analog and digital?

I have a Macbook Pro 10.6.4 2008 Model with details are below on graphics card and display options. I am trying two hookups to televisions which may or may not be possible. Can anyone tell me if my DVI output on the macbook pro is capable of delivering an analog signal to my old sony tube tv with component inputs? Second part of my question is do I have the right dvi cable. I purchased a cable with 24 + 5 pin. This cable does not produce a picture on my analog or digital television. Just snow on the analog and no input on the digital. The cable that came with my macbook pro is a DVI to VGA converter and seems to be an 18 + 5 pin plug....with a few pins missing in the middle. Should I buy another cable with the 18 + 5 pin DVI to component or buy a cable to connect the supplied DVI to VGA converter - VGA to component. Please help I'm confused on many fronts.
Thanks
Frank
Chipset Model: GeForce 8600M GT
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3212
Displays:
Color LCD:
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
VGA Display:
Resolution: 800 x 600 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
Macbook Pro 2.4 Leopard 10.5.2 Mac OS X (10.6.4) Brand New 3/08

I made an account and am replying to this because i have the exact same computer as you and i was also at best buy at around 3pm wondering the exact same things you were! The DVI port on our MacBooks are different than the standard DVI ports. Freaking weiiiiiiiiiiiiiird! Get out of my head!!!!
I ended up buying a VGA cable and using the converter that came with my MBP because the DVI to VGA cables at Best Buy had a different VGA than what the MBP has.
Our goals were slightly different though, I wanted a cable so i can connect the MBP to my Toshiba 42inch HDTV. VGA works but doesnt support 1080p, only 1024x768, which is not a fullscreen resolution. So i will be returning the VGA cable tomorrow and looking for a VGA to HDMI cable, if that exist.
So, to answer your question, YES, buy a cable that has the same ports as our adapter, or just use the adapter that came with the Macbook.

Analog to Digital (ie VHS to DVD)

As much as I love the internet I think I've overloaded myself with information, lol.
I have some home movies on VHS that I would like to transfer to DVD and have them be compatible with tweaking in iDVD or iMovie (I'm totally new to Mac BTW, I've only had my Macbook Pro for a little over a month).
I know I need to buy a VCR.... this is where my confusion comes in ... should I just buy a VCR/DVD combo (I'm looking at an LG RC797T for $250 @ Best Buy) and record the VHS tapes to a DVD on the machine? Will that video on the newly burned DVD now be digital video that will be importable and editable (are those words?) on my MBP with iDVD and/or iMovie?
Or, do I need to go w/some sort of analog to digital converter? I was looking at purchasing either a Canon Elura 100 Mini-DV or Canon ZR700 Mini-DV camcorder since they do analog to digital conversion (would have to go from VCR, out via S-Video into the Camcorder and then out of the Camcorder via Firewire into the Mac (actually an external HDD will be necessary so I don't suck up all my space).
I'm not a guru when it comes to file compression and rendering and video formats and all that happy stuff - I'd like a simple method that works well and produces a decent quality DVD.
I think if I can do it w/just the VHS/DVD machine that'll be the route I take (it'll be least expensive). If I have to buy a camcorder along w/a VHS machine then that's adding $$ to the project and I still need to buy an external HDD - scouring good sales for that info.
Thank you a million times over in advance, I've researched and read and dug and shopped my brains out for the past week and it seems like there is no simple solution.
B's Fan

Just a question.....if you have all these old VHS home movies, don't you already have a VCR? What have you been playing them on all these years?
I agree w/ Sue and Kirk. If you want to edit these old movies, you need to digitize the footage onto DV format.
I just connected my camcorder to my VCR (It is the VCR/TV combo unit and worked fine for this) and recorded the raw VHS footage onto DV tapes. Yes, there were a lot....I think I have about 150 DV tapes (one hour each).
I have been slowly importing them into my iMovies as I create them. I put my still photos and videos in chronologic order, so I import about one or two tapes per movie. Usually the 60min tape gets edited down quite a bit before I am finished. You know, you have plenty of bad shots, blurry images, terrific movies of the floor, ceiling, your hand, etc that can be cropped out.
If you really don't need to edit your movies, and just want them preserved as DVDs, I know that the Sony VHS/DVD combo unit works great. My brother copied some of his old Muhammed Ali fight tapes that he had recorded from tv. He didn't need to edit, just was afraid that the VHS tapes were degrading.
However, I recommended to him that he do the same as I, and get the footage on DV tapes to preserve them. I am sure that DVDs are not going to be the technology of the future. They can become broken, melted, scratched, etc. I save all my edited movies on DVDs and on more DV tapes. I (almost)always export my finished movies back to my camcorder after I have made my DVD.
The DV tapes are small, can be easily stored in a cool dry environment, and your memories are not lost.
Because VHS tapes are not great quality to begin with, you could (and I have done this also) copy the finished DVD to your camcorder by connecting them and recording from the DVD. Supposedly there is a quality loss, but you will not notice because the digital version of your movies will be so much better than the original. I have occasionally had to do it this way when I deleted my iMovie after making my DVD, but forgot to export it back to the camera.

Which is the best Analog to Digital Converter

Hey everyone,
Im new to this movie making digital world. I have been using imovie for a while and looking to upgrade to FCP. Before I spend the money, just a few questions hoping someone would know the answers.
1: Can I use idvd to burn my movies with FCP?
2: Im need an analog to digital converter, but not sure which one to get. I have VHS, Hi8, mini DV, etc... Which converter is best with mac, specifically with FCP?
3: Does FCP work well with an external harddrive?
Thanks...

1. Yes
2. Canopus and DataVideo are popular but some camcorders have a built in A-D converter. Note that Mini-DV works without needing a converter. Just plug in your camera with FireWire.
3. Yes

Macbook Pro 4,1 (early 2008) is the DVI port analog or digital?

I have been tasked with a slide show presentation on a family member's HD TV using my MacBook Pro 4,1. The TV is a slightly older big screen TV without HDMI inputs. I would lke to use the component (YPbPr) inputs on the TV rather than VGA. VGA degrades the image appearance too much.
I purchased a "ViewHD" HDMI input (Digital) to YPbPr (analog component) Output Switch Converter with the thought of using my 2nd Gen Apple TV (ATV) to connect the ATV via HDMI into the Converter and output the component YPbPr to the TV set. I am looking for a simple, elegant solution as I know this question will rear it's ugly head again.
First, I could find no resources that discusses the output of the DVI port on the MBP. Is it DVI-D, DVI-A, or DVI-I?
Is there an adaptor out there that I can use to change the DVI out on the MBP (if it is digital) to HDMI so I don't have to use the Apple TV?
Any help or solutions would be greatly appreciated.
TIA

The DVI connector on a MacBook Pro supports both Analog and Digital output.

Simultaneous analog and digital waveform read with PXIe-6361 and BNC2120 ?

Hi there,
I am trying to collect both analog and digital signals from a PXIe-6361 linked to a BNC2120, using the attached VI. I am running Labview 2011 64bit. This is the first time I am working with digital input. On the 2120 board, I have the digital input BNC cable connected to User Input 1 and wire between the screw terminal of UserInput 1 and the P0.1 (Digtial I/O) screw terminal.
I have two questions related to this:
1) When I try to run the VI in its current state, I get the following error:
Error -89137 occurred at DAQmx Start Task.vi:3
Possible reason(s): Specified route cannot be satisfied, because it requires resources that are currently in use by another route.
Property: RefClk.Src
Source Device: PXI1Slot2
Source Terminal: PXIe_Clk100
Required Resources in Use by
Task Name: _unnamedTask<6>
Source Device: PXI1Slot2
Source Terminal: None
Destination Device: PXI1Slot2
Destination Terminal: RefClockInternal
Can anyone point me in the right direction for troubleshooting this?
2) I would like to combine my regular waveforms and the digital waveform into one array which would then be written to file. I can't figure out how to combine the two different waveform types...can anyone give me a hint on this?
Thanks for your help,
Claire.
Attachments:
Export Waveforms To Spreadsheet File (1D)_wo extra line.vi ‏33 KB
Multi-Device Synch-Analog Input-Finite Acq-Analog Start_Claire_wDigitalin.vi ‏105 KB

Hi ClaireJ,
Sounds like a reference clock conflict. This KnowledgeBase (KB) talks about this error when using simultaneous sampling. Also, might want to check the device routes in Measurement and Automation Explorer (MAX) as discussed here. Finally, if you are routing your PFI line over a RTSI connection, this error can occur. This KB discusses it.
As to your second question, this post should help.
Bill E. | Applications Engineer | National Instruments

Analog Vs Digital What provides the best end radio results! AUDIO RECORDING

This is always an interesting topic so I though I start I chat on this. Here are some questions to get you guys going.
1. What is the difference between Analog and Digital?
2. Which sounds better Analog or Digital?
3. What type of music works best with Analog and which type works best with digital, meaning in terms of production. (oppinion)

I moved straight on from analog and digital to my current "Digilog" setup.
All my mics, speakers and anything that interfaces directly with the real world are digital (I sample the individual quantum states of each energy quanta - far more accurate and realistic that straight sampling.)
Those signals go staight into my digilog quantum computing system, running a specially modified version of Logic 7.5 QE (Quantum Edition). (You can also get the SHSE version - Steven Hawking Special Edition, although I wouldn't recommend recording vocals in that one...)
You'll be no doubt pleased to hear that sample editing has been improved in this version to "Quantum Accurate Editing" in the arrange page, which works great.
Analog and digital are so last century. Get with the program and upgrade to Digilog! And as an extra bonus, you can remaster your existing recordings into the digilog domain and sell them all over again!
Just remember not to clip anything in a digilog system, or else the universe collapses into a single quantum singularity, and once that happens it's impossible to uncompress the universe back into it's former dynamic range even with Logic QE's Quantum Expander.
BTW I recommend staying away from the "AnalDig" system. I tried it once, but it never sat comfortably with me...

How does ipad digital AV adaptor works? does it have a Analog to Digital conversion?

I wonder how the Digital AV adaptor works? I heard the ipad 30-pin connector does not have digital video out. Does it have an Analog to Digital converter inside the adaptor?

Yes..same thing here..I get a pop up saying This Accessory is not Suported...I click Ok and I get a 4x3 "mirror" mode on my TV. However when I play a movie it is in the proper aspect. Same goes for the SlingBox" app. I tested photos and they appear in the 4x3 ratio as well.
I only use the adapter for the occasional movie while staying in hotels so it's not a big deal to me that most of the items are in a 4x3 ratio.
I'm coming from an iPad 1 so mirroring wasn't an option so technically, I didn't even know what I was missing..not sure if the iPad 2 mirror function displays in 16x9 ( or whatever the native aspect is )

How to store the output of a analog to digital converter into an 2D array

Hi
I am doing my M.Tech Thesis in Image reconstruction and I am using labview for simulation and I want to know how to store the output of a analog to digital converter into an 2D labview array.

nitinkajay wrote:
I want to know how to store the output of a analog to digital converter into an 2D labview array.
How exactly are you performing 'Analog to Digital'???
Grabbing image using camera OR performing data acquisition using DAQ card OR some other way????
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Analog to digital protocol

Hi again,
I got a lot of help yesterday on hardware devices that allow capture of analog video. Thanks.
That got me to wondrin... If I'm going to try to do this, I might as well learn the basics.
When a card or outboard hardware device captures and digitizes analog video (with audio) for import to a Macintosh, what is it doing, exactly? It seems like it might be converting the analog data to a digital format or protocol. If so, what format or protocol is it?
Do these devices have a dedicated processor on board, running a codec? Or do they do something less demanding, move the data to the computer, and then let the computer's CPU run the codec?
If the codec runs on the capture device, that would explain why some such products get a lot of praise while others earn general contempt. It would depend on the speed of the processor running the codec, it seems. In that case, you probably get what you pay for, more or less.
If I'm getting the fundamentals all wrong, just tell me!
Cheers,
Tim

Hi
Just some thoughts.
In my mind the videoconverter converts an analog video + audio signal
to streamind DV (digital format) that can be read by the FireWire port that
only accepts digital info.
So at least there is an analog to digital converting chip inside and in more
advanced models the other way around. Quality and speed is vital I think.
But the boxes/cards can sometimes make more. That may indicate some
more logic like a CPU or a signal processor of some kind.
My Canopus ADVC 300 can alter the video and sound so I get a better
material to work with and I get the feeling of that it even fixes some drop-
outs on the VHS tape. This I think can be worth to pay for.
Yours Bengt W

Analog to Digital conversion of hi8 tapes

I have many hi8 video tapes that I have been trying to digitize so that I can import them into my imac. I have connected my analog hi8 camera to a Sony DSC-PC350 mini dv camcorder that has an analog to digital converter (pass through). In the VTR mode I can view my movies on the Sony camcorder. However, when I connect the Sony to the iMac with a firewire, I get a 'no tape' message on my iMovie screen. At the same time the video screen on the Sony camcorder goes blank. Can someone help me with this problem? Or is it possible that you cannot import a conversion on iMovie '09?

Hi again ftts (having a little trouble pronouncing that)
I went to the Sony web site and simply downloaded the operator's manual for that camcorder...
http://esupport.sony.com/US/perl/model-documents.pl?mdl=DCRPC350
I also compared it to the manual of my TVR-330 which is a Digital8 camcorder and does have the pass through functionality. I did that to find the wording they use when talking about pass through (Sony never calls it "pass through"). All indications of the manual for your camcorder indicate you can input an analog signal and record it to digital tape. But nothing indicates you can use the camcorder as an A2D pass through device like you can with my Digital8 model.
So you will have to go through the two step process of first recording onto the MiniDV with tape. Then secondly importing it to the Mac. If you want to use that one.
For the DCR-TRV22 ...
http://esupport.sony.com/US/perl/model-documents.pl?mdl=DCRTRV22
it looks like that one WILL do the pass through function (see page 173 of the manual). So if you want to skip the tape part then use the TRV22 camcorder instead.
Cheers,
Patrick

Analog to digital sound input

I have a Mackie mixing board sending a stereo signal to a Sony DVMC analog to digital converter box. I can capture audio in FCP (although I can't hear it via headphones while capturing) but it plays back fine. I'm trying to get soundtrack or garageband to see firewire audio in via the converter box, but it's not being recognized. Any ideas?
Thanks,
K

let's see, i have a 14-channel mixer that i use as my sound centralizer.... microphone, vcr, phono, guitar, video recorder, 4-track stereo in, DVD player, and G4 output.... i send a control room signal to my amplifier... i use headphone output from my computer.

Analog to Digital VI

Hi
I am using analog to digital converter VI. In that VI, I see all parameters except sample rate. An ADC should always come with sample rate like 10KSPS,1MSPS. Can you tell me how to control sample rate of ADC. I have attached snapshot of my code.
Solved!
Go to Solution.
Attachments:
ADC_Sample_rate.JPG ‏54 KB

If number of samples per second is fixed( which is adc sample rate) and if we change the frequency of signal , number of capture points should change.
Example : If frequency of triangle signal is reduced by half, then number of samples captured in one cycle should be double.
Is this way simulated signal VI works/Designed?

Analog to Digital Converter boxes

Does anyone think Apple will ever fix iMovie to restore usage of many analog to digital converter boxes that were broken by iMovie 5?
I have a SONY DVMC-DA1 firewire unit and wish I could use it again in iMovie. Does anyone know what the exact component is that they left out or changed that would cause this problem? I'm just trying to understand.

The ADVC-55 is capture only. It includes composite & s-video inputs and stereo audio inputs. Firewire output.
The ADVC-110 is bidirectional (meaning you can both capture and output through it - this is a very good way to monitor your video during production as you can see the actual quality on a monitor/TV rather than just your computer screen, which has limited capability to show you the actual video quality.) It includes composite & s-video inputs and outputs; stereo audio inputs & outputs; Firewire input & output.
The ADVC-300 is also bidirectional and includes composite, s-video and component video i/o (D1 connector) inputs & outputs; stereo audio inputs & outputs; Firewire input & output; and software that enables you to tweak its video settings. Helpful in cleaning up particularly bad analog videos.
I've used these things for years and they all work great. I do not believe there is any difference in the internal conversion hardware ... The primary differences are support for one-way vs. bidirectional conversion; input/output connectors; and the software that comes with the ADVC-300.
If you have basically clean analog video, any of these units will be fine. You can use any analog source (VHS deck, camcorder, DVD player, etc.) and would typically use iMovie or Final Cut Express to capture your video on a Mac.

Analog to digital question

Similar Messages

Maybe you are looking for