Analogue Output is very weak

I bought an apple TV and updated the system to the newest version. The Apple TV is connected by a HDMI-to-DVI converter to a Samsung screen. Additionally, my hi-fi system is connected with the analogue output of the Apple TV, because no audio signals can be transfered to my monitor via DVI.
To hear just something, I need to amplify the audio signal that much with my hi-fi system. Why is the analogue output of the Apple TV so weak? When I connect a iPod to my hi-fi system, i don't need to amplify it that much!
Does anybody have a hint, what's the problem? The Apple support told me, that it seems to be normal? Does anybody have the same experiences / problems?

patrick85 wrote:
I bought an apple TV and updated the system to the newest version. The Apple TV is connected by a HDMI-to-DVI converter to a Samsung screen. Additionally, my hi-fi system is connected with the analogue output of the Apple TV, because no audio signals can be transfered to my monitor via DVI.
To hear just something, I need to amplify the audio signal that much with my hi-fi system. Why is the analogue output of the Apple TV so weak? When I connect a iPod to my hi-fi system, i don't need to amplify it that much!
Does anybody have a hint, what's the problem? The Apple support told me, that it seems to be normal? Does anybody have the same experiences / problems?
if your hi-fi system has an optical in jack, connect ATV and stereo with a toslink cable.

Similar Messages

Right channel output is very weak through headphones

I use my iPod touch when I workout. I have a pair of Bose headphones connected and I have noticed over the past few days that the right channel output when playing songs on the iPod is extremely weak.

- If it works with other headphones the try inserting/removing the plug a dozen times or so. Also try cleaning out/blowing out the headphone jack
- Next Try the standard fixes to rule out a software problem.
- Reset. Nothing was lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If still problem that points to a problem with the headophone jack.

Very weak Right Channel output

Looks like this is a growing hardware defect on the iPod Classics. This leaves me wondering how long Apple will ignore this before resolving the problem or do their sales level leave them unmotivated to even discuss it.
I have the 160GB model, about 15 months old. The right channel has gone VERY weak.
I am using the standard factory headset which works fine in any other device so the headset is ruled out.
The headset jack in the iPod is clean and makes good contract with the headset and persists when connected via the base connector (see below), so the headset jack is ruled out.
I can connect the iPod to a portable docking port that connects to the iPod via the connector at the base of the headset. The right channel is also weak when playing music out the portable dock speakers. So, this rules out all connectors.
Next, I tried changing the Equalizer settings across all personalities (Rock, Jazz, etc) with no change in the problem.
Next, I tried doing a master reset (Press and hold the Play/Pause and Menu buttons simultaneously until the Apple/iPod logo appears). No joy. Problem
Finally, the Factory Reset was tried using iTunes (which only seems to erase the hard disk and reload all my music).
None of this has worked. Either there was a bad firmware update from Apple, which they will never admit to by policy obviously, or there is a hardware defect in the latest design of the iPod Classic. There are far too many people posting this problem on the net for this to be an isolated case.
Has anyone found a resolution to this problem (WITHOUT armchair guessing)?
Thanks.

- If it works with other headphones the try inserting/removing the plug a dozen times or so. Also try cleaning out/blowing out the headphone jack
- Next Try the standard fixes to rule out a software problem.
- Reset. Nothing was lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If still problem that points to a problem with the headophone jack.

Guitar sound very weak?

Hi
I'm turning around trying to sort out a problem with a 'real' guitar whilst recording. I've been having no problems plugging in my guitar into my Presonus Firebox, setting up a guitar sound (ex : dynamic wah), and then playing along with whatever I'm doing.
However this morning I don't seem to be able to get the guitar to work. The sound/signal is almost non existent! My microphone seems to work fine (I'm also using a firebox control to boost by 12db etc) but for some strange reason very weak levels (if any).
Can someone either give me some suggestions, or run through the set up as maybe there's something not correctly lined up.
° I'm going into my Firebox on channel 2 (tried 1 but didn't make any difference) - boosted as already mentioned.
° The channel strip is set up - input 1, output 1-2
Help!!

problem solved, the guitar jack input somehow went down over night!

I bought my iPhone 4 open line in Vancouver, Canada last week for use here in my home base in Bangkok, Thailand. But when I tried using my Thai sim, I get a very weak signal, if not a weak signal, then a no service status. What do I do?

I bought my iPhone 4 open line in Vancouver, Canada last week for use here in my home base in Bangkok, Thailand. But when I tried using my Thai sim, I get a very weak signal, if not a weak signal, then a no service status. I also have very weak wifi reception. What do I do?
I already tried the following:
a. Turned the phone off and then on.
b. Checked all wifi connections – no problem given that all our laptops and desktops can connect seamlessly.
c. I tried restoring the phone to original factory settings via itunes
d. Tried resetting the phone.
e. Tried different microsims from all networks
f. However, all methods failed given that the network reception is very weak and often reflects – “no service”. And with regards to the wifi reception It has difficulty in reading even the signal right in front of the wifi router.
I went to two Apple resellers here in Bangkok and requested that they please look at my Iphone and have it serviced. I was frustrated when they said that given that I bought my phone in Canada, they are not able to support me and should instead try to contact the Apple store in Canada.
I went to apple.ca website and went to the expresslane support and I was said to register and callback. Tried calling the 1800 number but given that I was in Thailand I had difficulty getting a connection.

1st sentence, 4th page of the iPhone warranty found here:
Apple may restrict service to the country where Apple or its
Authorized Distributors originally sold the hardware product.
From the Repair terms and conditions found here:
9. Availability of Service.
Apple may restrict service to the country where Apple or its authorized distributors originally sold the
hardware product, and to the countries listed in the table below. A list of authorized distributors is
available online at:
http://images.apple.com/legal/warranty/docs/iPhoneAuthorizedDistributors.pdf
If you do not believe that, then see these search results which confirm my statement.

My antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

my antenna signal is very weak and I have the iOS 6.1 I CAN´T GET THE WIRELESS CONNECTION

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

Optical audio but Analogue output

Hi, I connected my AppleTV to my Bose audio system ONLY with optical audio cable.
I figured out that sounds comes out with a movie in DD and ALSO with other sources (like youtube videos).
The Audio & Video settings on ATV is setup to ON regarding DD.
Question: I thought that with that configuration I could hear only DD audio stream. Is a BOSE features or ATV output audio through optical always regardless its source format ?
Thanks, Roberto.

Oh yes, this is the reply I was looking for, so in this case I could avoid using the analogue output (RCA) on ATV ? In the case I'm going to use it anyway which will be the channel used by ATV for outputting audio ?
Question: if I have a movie with two audio tracks (the first one stereo and the the second one in DD) and connect the ATV to my Bose audio system with optical audio cable and my ATV is setup with Dolby Digital on which will be the audio stream passed to my Bose audio system ?
Thanks, Roberto.

TS1398 i have new ifone 5 and my wi fi reseption is very very weak

i have new ifone 5 and my wi fi reseption is very very weak
If I am away for more than three meters a router so I have no reception at all

of cors i trid to reset network seting before i wrote this post
i apdate version and reboot and pormat the iphone
nothing helps

Can I get an analogue output from Apple TV?

I am trying to connect my Apple TV to the Zone 2 of my AV receiver and it requires an analogue output. I purchased a digital to analogue converter and am running an optical cable from the Apple TV to the converter. It hasn't worked. Is there something I should be doing or trying?

If you have it set for Dolby Digital out I'd alter that to Off in Settings as the DAC probably only handles stereo.
AC

I have version 4.1.2 and recorded a lead guitar track (live classical guitar) using the acoustic guitar echoes (flange enabled). Now, when I burn a CD, the guitar track is very weak. Any clues?

I have version 4.1.2 and have been doing great rercording for several years. I use only real instruments. This week I added "acoustic guitar echoes" to my classical guitar, and that enabled the "flanger" setting which is what I wanted. Mysteriously, every time I burn a test CD, that lead guitar track is very weak, even though the recording level is quite high. Nothing I have done has helped the mix. Does anyone know why this is happening and what I can do to circumvent it? I've tried burning straight from GB to a CD and also via Itunes; it doesn't make any difference. Thanks.

P.S. I usually record my classical guitar on the "vocal" and "live performance" settings, using my Blue YETI mic, set on stereo. I get great recordings which always transfer perfectly to my CDs. I'm puzzled why adding the acoustic guitar echoes would be failing in the burn process. Hope this clarifies.

Compared to Word, the spell check is very weak. Am I missing something?

I am attempting to switch from Word to Pages but I find the spell check is very weak. Am I missing something?

Barry
I sense a pressing urgency in Ken's request.
Peter

Very weak signal

Hello
I have just moved, and in last home the airport express sent a strong signal to my iBook and my G5.
Now that I have moved (and I added the connection to my speakers) the signal is very weak (but working) on my G5 but full signal on the iBook.
I checked Airport Admin and increased robustness also I don't think it's other items that may cause interference.
The Express is now on the same shelf as my TV, DVD, stereo, but I don't think that should matter should it?
Please help

It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing you from getting a good clean signal.
I suggest you perform a simple site survey, using utilities like KisMAC, MacStumbler, iStumbler, or IPNetMonitorX to determine potential areas of interference...and then, try to either eliminate or significantly reduce them.

E90 Very weak WiFi signal

My E90 has a VERY weak WiFi signal, and in places I regularly use a 9500 and my laptop with no problem, my E90 simply will not work e.g. from first floor to ground floor. If I move closer to the Wireless router, then it is fine on both Email and Web.
So it seems purely that the strength on E90 is far weaker than 9500.
Has anyone else found this?
Is there any way to alter signal strength in the various WiFi settings?
Or is this yet another shortcoming of E90 over 9500?
Message Edited by beaumec on 09-Aug-2008 01:57 PM

beaumec wrote:
Yes I already altered Tx power settings. Thanks for suggestion. Makes no difference.
It really seems this E90 just has a vastly lower power WiFi rating than my 9500.
It is very tedious to be unable to connect even within one's own home and frankly renders the phone totally useless, quite apart from all the other problems well documented on here.
I think I can see why so many are up for sale on Ebay.
Does anyone at Nokia read these discussion pages and does anyone care that their products seem to fall short in SO MANY aspects?!
That's right, it seems no one reads these discussion.
However, if u have ur problem solved, pls advise
badran

Very weak WLAN signal on Satellite Pro L10

Hi,
I have a Sat Pro L10 that came without a mini pci wireless card so I bought and installed one and fitted internal antenna behind the screen. When I am in the same room as the router I have a brilliant connection but as soon as I leave the room I lose it all together. The router is fine as other people have no problem connecting to it. The card I bought is made by Agere but came labelled as Toshiba, I have updated the driver to the newest I could find which is june 2002.
Any help on this matter would be greatly appreciated as I'm sick of dragging this wire around with me.

Hi
I think there is no much to do. I think the environment has a strong influence on the Wlan signal receiving. Its the same issue like yours.
My brother uses the Wlan at home and the signal is strong enough if he is in the same room but in other rooms the signal is very weak. But at my home he can receives the WLan signals without any problems. The signal is strong also if he is in different rooms
I think the room walls are the reason for the weak signal.
But you could check the Wlan card properties in the device manager. There you could change some settings in the Advanced tab. For example disable the power saving, etc

Airport Extreme (5 Gen) suddenly very weak Wifi signal

Hello, everyone. I have a 5th generation Airport Extreme that was working fine until a few days ago. My power had gone out, and since then I am getting a very weak Wifi signal. The network still appears and connects on all of my devices. However, it is dreadfully slow (0.3 MB/s per Speedtest.net), whereas before it was 50 MB/s. I have tried resetting to factory settings and opening up the option to 5GHz. The 5 GHz wireless network works just fine on my iMac. It doesn't show up as an option on my iPhone, though, and that's what's really bugging me.
I'm wondering if anyone else has had this problem and can help me out. Of course, my phone support expired a few months ago and now they want $19 for a tech call. Any help here would be greatly appreciated.
Thanks!

Reset to factory again.
Setup again using all short names, no spaces and pure alphanumeric. If you were doing this make sure you use different names. Empty all the old names from the clients so they start over with fresh clean setup for wifi.
Use a different name for 5ghz.
Use fixed channels.. try 1, 6, 11 for 2.4ghz and try 36, and 150 for 5ghz.. around about.. exact channel is not such a big thing for 5ghz.
Check the link speed and make sure it is full speed if you are in the same room as the AE.
Test by copying a file on the local lan.. rather than testing to internet which could be a totally unrelated issue.
Test by using ethernet only on a computer plugged into the AE to see if the internet link has gone slow.

Analogue Output is very weak

Similar Messages

Maybe you are looking for