Analyse zenworks inventory reports

Hello,
We want to use the zenworks inventory to check whick user is installing
"illegal software" on his pc.
This by running a software inventory report and comparing the results of
this inventory.
This software inventory report give us a very large listing of exe files and
versions, for example querying all software of Microsoft Incorporated gives
us 33 pages of different programs.It is nearly inpossible to interpret this
listings.
Is there a way to bundle this information of are there programs who can do
it ?
Thanks,
Bearelle Jacques

Jacques,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Zenworks Inventory Scope only shows "servers"

    When I go into ConsoleOne v1.3.6h, Tools, Zenworks Inventory, Reporting... the scope says "servers." I can't choose workstations. When I try to do a quick report, it also has "servers" chosen by default. Workstation and Both are greyed-out.
    I can go into individual workstation and look at their inventory.

    spsmith,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Physical inventory Report

    Hai Friends,
    i have one requirement.
    I NEED TO GET ONE REPORT IN THAT
    Physical inventory report - in which i need get the details of  What is the material  ? how much stock i have posted ? how much system stock ? & what is differece between system stock & posting stock ?
    please let me know if there is any SAP Standard report ?

    For Physical Inventory SAP Standard reprts are enough.
    T-Code - MIDO -Physical Inventory Overview
    This transaction code you can check everything. it has links to many other Physical Inventory reports also.
    Complete List pf Physical Inventory reports:
    MI20 - Print List of Inventory Differences
    MI21 - Print Physical Inventory Document
    MI22 - Display Physical Inventory Documents for Material
    MI23 - Display Physical Inventory Data for Material
    MI9A - Analyze Archived Physical Inventory Documents
    MIBC - ABC Analysis for Cycle Counting
    MIDO - Physical Inventory Overview
    MI24 - Physical Inventory List
    enjoyyyyyy
    Akshit

  • Inventory Report in C1

    When starting a Inventory report in C1 I get this error:
    ZENworks Reporting encountered an error because of Crystal Reports. For more
    information, see the ZENworks error message online documentation at
    http://www.novell.com/documentation
    The Zen7 documentation give 2 reason vor this:
    1. wrong/old MDAC (I have win XP SP2)
    2. wrong snap-ins (I have install C1 on my PC und only copy the zen 7
    snap-ins on it)
    So I think there is an other problem.
    Please help.
    Thanks

    Christian,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Zenworks Inventory Data Export

    I am trying to get a report of our current systems using the Zenworks
    Inventory Data Export as shown in edir.
    When I run the export it also shows systems we have deleted. I am
    running
    zfd 4.01 sp2.
    Is there a way to get a report on only the systems that are in edir or
    filter it for only current systems?
    Thanks,
    Paul

    paul,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Asset Tag not propagating to server inventory report

    We have Dells and we use the cctk.exe to set the asset tag. On my clients, the local zenworks client (10.2.1) can see the Asset Tag of my computer.
    But the detailed inventory report of the server does not show the asset tag.
    Anyone experience this before or have an idea on how to get this in reports?

    On 11/3/2009 11:26 AM, brestt wrote:
    >
    > We have Dells and we use the cctk.exe to set the asset tag. On my
    > clients, the local zenworks client (10.2.1) can see the Asset Tag of my
    > computer.
    >
    > But the detailed inventory report of the server does not show the asset
    > tag.
    >
    > Anyone experience this before or have an idea on how to get this in
    > reports?
    >
    >
    We only have ZCM Standard and I noticed that I stopped seeing the asset
    tag in inventory about the exact same time my 'Asset Management' trial
    expired. Can anyone confirm this?
    Cliff

  • Inventory reports without value/price

    Hi there,
    I am looking for an inventory report like MC.9, MCBA, MCBE without value. Is there any standard inventory report without value or is it possible to restrict these reports without value through authorization?
    Regards,
    R.S

    HI,
    ,try this not sure
    MB53 - Display Plant Stock Availability
    MB52 - List of Warehouse Stocks on Hand
    MB5T - Stock in transit CC
    MMBE-stock overview
    MB51-material document list
    MC50-dead stock
    MC.1  INVCO: Plant Anal. Selection: Stock
    MC.2  INVCO: Plant Anal.Selection, Rec/Iss
    MC.5  INVCO: SLoc Anal. Selection, Stock 
    MC.9  INVCO: Material Anal.Selection,Stock
    MC.A  INVCO: Mat.Anal.Selection, Rec/Iss 
    MC.L  INVCO: Mat.Group Analysis Sel. Stock
    MC50  INVCO: Analysis of Dead Stock      
    MCBA  INVCO: Plant Analysis Selection    
    MCBC  INVCO: Stor. Loc. Analysis Selection
    MCBE  INVCO: Material Analysis Selection 
    MCBK  INVCO: MatGrp Analysis Selection   
    MCBR  INVCO: Batch Analysis Selection  
    Regards
    Kailas Ugale

  • INVENTORY REPORT for customer but not consignment company owned

    HI Everyone,
    I am working on creating an inventory report and sending it out to a customer.
    We have a customer who needs to see their inventory we are going to ship. we are making materials for them on an MTS scenario based on a forecast... So the customer before placing a PO should be able to look at the inventory levels we make for them. on a daily basis.... No what I am trying to is execute a program that sends out an inventory report (the programs I am using are( RSMIPROACT and ROEMPROACT)... I try to fill in the fields and save as a variant and we run it as a background job every morning and we send out an idoc to the customer...
    The above process is a scenario that still needs to be worked on...
    THe customer should be able to look at only his stock and not any other stock....
    Now can we use a display of listing/exclusion function to send out the material stock report.... we need to send the total inv as well as the mat numbers... can we acheive it with the listing/exclusion funtion..
    Or is there a program that pulls all the data from the tables which store the customer material info record where we maintain all the materials for a customer...
    If there i a better way through which this can eb done please suggest me... thank you..
    Once again the above stock is not consignent stock... we are manufacturinng based on the forecasts and we need the customer t be able to look at the stock on a daily basis.... Please help...

    There is no report / funtionality is SAP to acheive this. Custom program is the only solution. Your logic looks ok, where there is a CMIR maintained, you may pick the total stock from table MARD put into a format/layout and transfer via idoc to the customer.
    Thanks & regards
    AHP.

  • Inventory Report For Special Stock (Project Stock)

    Dear Sir,
    We are in Make -To - Order scenario and procure the material against  the WBS element . For getting the Inventory List , we use MBBS tcode but it has following limitation :
      a) It give the Stock Status as on date basis . While we need Stock Inventory on a cut off date , say on
          31/Jan/2007 .
      b) We are not able to get the Inventory Report , Material Group wise
    I request to kindly guide me , as how to take the Inventory Report for Project Stock .
    Regards
    B Mittal

    Hi Shailesh,
    Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything.  Can you please help.
    Regards,
    Laxmi

  • Inventory report for Previous Periods

    Hi Experts ,
    I would like to have an inventory report for all materials in a Particular Plant for the Periods Sep 2009 and Sep 2010 . Could you please help me in providing the reports for the same .
    Thanks
    Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com 
    See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
    A good way to search the forum is with google. See this blog with details for a good search
    http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
    This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
    The discussions are not a replacement for proper training
    Thread locked
    Message was edited by: Jürgen L

    You can well run these reports on background..
    Go to SE38 Enter the program name "J_1HSTCD"
    Then press Execute / F8.
    Enter you selection date as 01.09.2009 to 31.09.2010 and enter the plant and leave the all selection as per SAP standard..
    Then press F9 or Go to Program

  • Inventory report for the selection of requisitioner and MRP controller

    Hello Experts,
                           Can someone please help me with a standard  Inventory report in which we can give input thr requistioner and MRP controller
    regards,
    YK

    Hi,
    You will get the requisition no. from EKKO (provided PO has been created otherwise you won't get any record). Find out PO & item no. for the requisition item. Then you can check EKBE table whether GR has been posted or not. If GR has not been posted then there won't be entry in EKBE for that PO & item.
    Regards,
    Rakesh

  • Inventory Report-Replacement path for Base UOM to Case and Standrad Cost

    Hi, We have a Scenario as below:
    Question1:
    We have a multiprovider contains 4 infocubes and 2 Master Data objects
    a.Demand
    b.Inventory
    c.Sales Orders
    d.In Transit
    Master Data objects
    a. Material (contains Base UOM to Case as Key Figure Attribute and also Base UOM as an attribute)
    b. Material Location (Contains material as an attribute and also Standard Cost as a Key Figure attribute)
    At the report level two formula variables are defined with replacement path for showing the Base UOM to Case and Standard Cost in columns.
    We have 4 reports on this multiprovider. There is a dialy sales report which gives the following details
    Material, Location, MRP Controller, CalDay, Base UOM, Actual Sales(AS), Dependent Demand(DD), Consumption Qyt(CQ), Base to Case UOM, Standard Cost
    In this report for all the records the Base to UOM and Standard Cost column is coming with values which is nothing but the replacement path on the material master key figure attribute. Though this report is on the multiprovider all the major keyfigures (AS, DD and CQ) are coming from a single cube( this is an observation from myside).
    We have another report which is the Inventory Report with the following details:
    Material, Location, MRP Controllder, Calday, Base UOM,      Unrestricted Inventory(UI), committed Inventory(CI), Back Order Qty(BOQ), In Transit by Sh/Rec(ITS), In Transit Pipeline(ITP), On Order Qty (OOQ), Current Inventory Position (CIP), Quality Inspection Stock(QIS), Block Stock(BS), Base to Case UOM, Standard Cost
    Now in this report for all the records the Base to Case UOM and standrad cost is not showing up. Is there anything which needs to be done in order to get the Base to Case UOM and standard cost for all the records.
    Question2:
    When Non-Cumulative and Cumulative key figures are combined at the multi provider and also at the report level, will there be any problem?
    Regards
    Vijay

    Hi,
    I think you can proceed with virtual characteristics for this.In the code you can truncate the time and you can display on the date:
    Regards
    Prasad

  • Inventory report for stock category B

    Hi everyone,
    We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.

    it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise

  • Inventory report with the last transaction details of each material

    Hi,
    is there any standard inventory report in SAP which gives us  the last transaction details of each
    Material,along with last procurement qty, value, date and last issue
    details of Qty, Value & date.
    Thansk in advance.

    Hi
    try following t-code
    MB5B u2013 Stock on Posting Date
    or
    2   s_p00_07000139 u2013 Stock Card and Inventory Material Report
    Regards
    Kailas Ugale

  • Read Only Access while assigning Analysis Types and Reports in User/Group

    Hi Team,
    While Assigning Analysis Type,Reports and Workbooks to User "Read" option is not enabled. It is not working and as soon as we select analysis type ,Only one option is editable "Create/Update/Delete". The other two Option is always there as display "Read" and "Execute" . Execute might work with "Scripts template" but "READ" should work for analysis types and Reports.
    We are already struggling with "Read Only" Access in security filter as its not working now.
    Thanks
    Edited by: user7918731 on Mar 2, 2011 11:22 AM

    The behavior for Analysis type, workbook and script as follow:-
    The Analysis type create/update/delete option will be enabled, read and execute option will be disabled by default.
    The report workbook read option will be enabled, and other two options will be disabled.
    The script execute option will be enabled, and other two option’s will be disabled.
    For providing “Read Only” access in security filter, Switch to the administration tab, Click on Security Filters, Click on Add button, Open Create Security Filter window, Select the access level to Read Only and select user in assigned user , Click on ok.
    It should work.

Maybe you are looking for