Analysis Authorization - Assignment Issue

Hi,
Created a analysis auth: and assigned the same to one user. But the issue is that the assignment holds true for all the users. how can i make it assigned to one single user? Is this suppose to work this way or am i assuming things?
Thanks,
Sri

Hi Sri,
I doubt your issue.
please search the forums first before posting questions. This avoids redundant effort and saves time and resources of your peers.
There are many threads available if you search with the search criteria Authorization.
Cheers
SAP NetWeaver BI Organisation

Similar Messages

BI 7.0 Analysis authorization creation issue

Hi,
We are prototyping the new analysis authorization concept have a question regarding the build.
We've had the BI execute the pre-implementation tasks (activate the business related content and OTCT* and OTCTA* infocbues and and OCTA* infoCubes).
There aren't any custom reporting objects to carry over since the queries were previously just secured by the S_RS_ICUBE Administrator Workbench - InfoCube with specific values for the Infocube. Since this object is no longer checked in query processing, is it a correct statement that the characteristic 0TCAIPROV (InfoProvider) should be populated with whatever values were listed in the S_RS_ICUBE object for the InfoCube field?
We built an anslysis authorization via RSECADMIN per the requirements below and executed it with a test user ID assigned the regular reporting roles (with access to the queries).
0TCAIPROV     InfoProvider     EQ          "Value 1"
0TCAACTVT     Activity                     EQ     03
0TCAVALID     Validty Date
0TCAIFAREA     InfoArea          *
However, when executing the query as this test user, we received a "you are not authorized messsage". The trace didn't show detailed information, so we executed the same query with another user ID that was assigned 0b1_all and obviously could execute successfully.
Is it correct assume that all the characteristics that were checked in the trace are authorization relevant for the query? we added the characteristics with full authorization and still couldn't execute. In addition, when checking these characteristics via RSD1, they weren't makred as authorization relevant, yet they still appeared in the trace.
Is there something else that is misisng in the analysis authorization? I checked the characterics for variables and none were defined.
Any troubleshooting tips would be appreciated.
Thanks in advance

Hi Julie,
0TCAIPROV should have values of infoprovidors ( infocubes) that you want the user to have access. If you dont want to restrict it by infoprovidors then you can give a ' * ' for 0TCAIPROV CP value ' * '.
Also make sure when you run the query it is not looking for any other infoobjects which have been made Auth relevant.
You can actually see the error log for queries
Go to RSECADMIN --> Analysis tab --> click error logs --> click configure log recording --> enter the test id and save. Now you do the test using the test id for query. Then come back and see the log for the test user and it will tell you what went wrong. Please let me know if you have any questions.
Thanks,
Karthik Kiran

Analysis Authorization Issue

Hi:
I created an analysis authorization ZCO_CODE to trstrict it by a company code.
I added following objects in authorization with values.
0COMP_CODE = 1000
0TCAACTVT = 03
0TCAIFAREA = *
0TCAIPROV = *
0TCAVALID = *
Then I created a role Z:00:BW_REPORT, where I added following authorization objects S_RS_AUTH and restricted it by value ZCO_CODE. Then I assigned this role to a user test01.
When I execute a program RSEC_MIGRATION for this specific user, I do not see authorization object ZCO_CODE on 2nd step of this program. Any Idea Why? I think this object should show up as I want to migrate this specific object.
Help will be appreciated.

Hi Sachin:
Okay here is my issue.
I have a Reporting authorization Object created earlier which is ZCOCODE. I though I'll have to create a new Analysis authorization object e.g. ZCO_CODE and then restrict it with other chars. as mentioned in Marc Bernards presentation and then you have to migrate it.
In selection list I can see old Reporting authorization object. If I select it and use option "Enhance existing profile" then It will update profile and not role? right....
How can I see whether it has updated existing profile?????
Do I need to create new Analysis Auth. for Company code or I can use old Reporting authorization for company code?
For testing purpose, I created a test user and assigned all reporting roles but It will not show up in RSEC_MIGRATION step???

Analysis Authorization for nav Attr Issue

Hello:
I have a 0COMP_CODE as an attribute of 0SALSORG and it is marked as authorization relevant. i.e 0SALESORG_0COMP_CODE is authorization relevant.
I created an analysis authorization Object ZCOMPCODE_1000 by adding following in it.
InfoObject Value
0COMP_CODE = 1000
0SALESORG = *
0SALESORG_0COMP_CODE = 1000
0TCAACTVT = *
0TCAIPROV - *
0TCAKYFNM = *
0TCAVALID = *
Now I have a report on a cube which has 0SALESORG as char and also 0SALESORG as a variable on selection.
When I run a query for sales org = 1000, I can see rsults as sales org 1000 is assigned to company code 1000.
If I run report for sales org 2000, I should get not authorized message as 2000 is not assigned to company code 1000 and I only have a role assigned to me which has analysis authorization object ZCOMPCODE_1000. But Still I am getting report results.
Please explain Why and How can I overcome this issue.
Thanks

First of all it is strange that we see two appearances of sales org.
0SALESORG = *
0SALESORG_0COMP_CODE = 1000
Probably the star value overrides the setting in the second one.
Besides did you create the variable in the query as authorization relevant or you will have problems there.

BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

Hi All,
This is regarding BI 7.0 Analysis Authorization issue.
Overview:
we have restricted some queries at infoobject level.
Issue:
a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
d. Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
e. But when we execute the same report with Auditors ID then we get a blank page.
Any idea why this is so?

Hi Neha,
I tried the below also,
GL Acnt
I EQ 0000134010
I EQ :
but still it didn't work.
No Infoobject is missing in Authorization Object.
For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
As mentioned earlier also it is giving me the below message,
""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION RS_EXCEPTION 301CL_RSR_RRK0_AUTHORIZATION AUTHORITY_02"
Kindly suggest, since this is a show-stopper for us!
Thanks,
Ishdeep Kohli.

Analysis Authorization and relates issue

Hello all,
I am in the midst of designing authorizations using RSECADMIN transaction.
We have a set of 50 different queries.
In our cube, there are 5 different characteristics, which are authorization relevent.
So, in RSECADMIN, i have created one analysis auth role, included all special and authorization relevent characteristics and maintained the appropriate values.
But when i execute the queries,the desired output is not coming.
- Do i need to create authorization varaibles and included in all my queries ?
- Without including the auth.variabes in queries, is there any other way to restrict the users ?
I though, by assigning the parameters in RSECADMIN, the query will automatically filter the data.
Can you pls help ?
We are on SP19.

Hi,
First of all, The query is always based on a InfoCube. Now, you have 50 different Queries which is based on this InfoCube if I am not wrong as you are not getting any authorization error.
For a query to run, the user should have access to 1. Query, 2. Infocube and 3. Data(All Auth Relevant + 4 Special Objects)
Authorization relevant objects are for an InfoCube which means that these objects are important or key fields for the infocube.
You say that in your case, you have 5 Auth relevant objects which means they are important. But please note that there are more infoObjects in that InfoCube.
Now, when you go to the query design, you can restrict on any object in the InfoCube but it makes more sense that you do it on one of those authorization relevant objects as you have to specify that in the Analysis Authorization where the system can pick up the data easily and give the output.
Again, on the query design, if you have designed the query with processing type "Authorization", then it would automatically pick up (What you mentioned as automatic filtering) the value from the Analysis Authorization which is contained in the user's role for that query which otherwise gives a wide variety of options to chose from where the user has to choose the correct one.
To get the desired output, all the correct variables should be included in the query and user should have access to all the three mentioned above.
May be this gives a clear picture.
Regards,
Prasanna
Edited by: Prasanna Nagaraja on Sep 11, 2009 11:40 PM

Issues with Analysis Authorization on Infoset

Hi all
We are facing an issue with Analysis Authorization on Infoset, it doesnt seem to throw authorization error when we access a record that is outside the authorization. We tried to use the same authorization set up from the same user we try to access the a record that is outside the authorization it behaves correctly.
Here is my setup
0CRM_MKTELM__0CRMCAMPTYP = ZA11
0TCAACTVT = *
0TCAIPROV = *
0TCAVALID = *
When I tried to access ZA12 it should throw an authorization error but for infoset it doesnt seem to work. Is there anything that we should take note for Infoset?

Hi Chee,
I am getting similar issue.
I believe navigational attribute was already a authorization relevant in your case.
What and where did you set it as authorization relevant to make it work on infosets.
Regards,
Ramz

Issues with Analysis Authorization checks in APO

Hi Friends,
I am facing an issue with Analysis authorization checks in APO.
We have setup user access based on Management Entity (Analysis authorization - AGMMGTENT and 0TCAACTVT) and core APO authorizations (based on the work profile - e.g: Demand Planner).
Scenario: Consider User A has access to India and Australia Management Entities with 0TCAACTVT - *
This user also has display access to all management Entities (AGMMGTENT - * and 0TCAACTVT - 03). This scenario works very well in Quality where the RSECADMIN trace shows check on both Characteristics. However in Production the RSECADMIN trace shows up only against AGMMGTENT (*) and by default takes 0TCAACTVT as (*).
In Quality the Characteristics that get checked are as below : and it works as expected. Display access for Management Entities that are supposed to be displayed only and change access to only the Management Entities that it should.
However the Trace for Production shows the following : As a result it is allowing the user to change access to all management Entities. Which is not desirable..
Resultant trace results are as below: This should not happen..
I have compared all Analysis Authorizations and it is same across both Instances. The Demand planner access is consistent too..
Will it be possible for you to advise on what could I be missing.

Hi All,
If it helps, in Quality: the Authorization checks are listed as: Subselection (Technical SUBNR) 1
while in Production it checks Subselection (Technical SUBNR) 1 in one place, however where it fails - the check happens as Subselection (Technical SUBNR) 0.
Is there a way we can change this to SUBNR 1. Is there any table entry that I can look at to check if the Authorization check is functioning incorrectly..
Please advise.. Thanks..
Regards,
Prakash

Analysis Authorizations Issue (BI 7.0)

Dear Colleagues,
I have a question regarding BI 7.0 Authorizations. What happens when a cube is created from an Infoprovider in which Company Code (to use an example) is marked as authorizations relevant, but that infobject is not used. That is, the cube gets data from that Infoprovider, but the data retrieved has nothing to do with Company Code. When a query is created from this cube, will the user be required to have authorizations for the company code of the information he's retrieving or will she/he be able to see all the information?
Thanks in advance for your help.
Best regards,
CMPT

Hello,
I think I understand your question?
If you have characteristic company code marked as authorization relevant...
You have two basic info cubes, one with company code A and one without company code B.
You have a multi cube combining characteristics from both basic cubes (including company code).
If you execute a query written against the multi cube but extracts data only from basic cube B (without company code), will you need to have an analysis authorization with company code defined?
If this is your question, then Yes, you do need to define company code in the authorization (assigning value # should be sufficient).
KR
Andy

Transport roles and analysis authorization with user assigned

Hi expert,
I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
Thanks for your time,
Luis

Hi,
In role administration, you have the following options for transporting roles:
You can download the roles from one system and upload them into another
You can import the role from a remote system using RFC
You can transport the roles with the transport function.
Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
Transporting Roles with the Role Transport Function
       1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
       2.      Enter the role to be transported and choose Transport Role.
The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
For more information go thrpugh the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
Regards,
Marasa.

Assignment of analysis Authorization

Hello Experts,
i have created an analysis authorization and assign the same to 20 users. Now i want to assign some other analysis authorization to all those 20 users instead of that previous one.
so how can i achieve this??
thanks in advance
Neha

I think you might have assigned that authorization object to some role.
Then if you remove the authorization object from that role it will removed from
all the user.and assign the new authorization object to
this role .
You can check the user with that role in suim t-code.
Thanks,
Saveen Kumar

Analysis Authorization Issue 7.3

Hello Friends,
System BW 7.3, Currently there are 80 odd analysis authorization objects
We want to introduce a new info object (GL Account) to be authorization relevant, ( there are few objects in the system which are already authorization relevant in the system with proper analysis authorization objects and they are working fine)
Things done, made the GL Account object authorization relevant in RSA1, Created 2 analysis authorization objects with GL Account and TCT objects and one with hierarchy restrictions and one open access.
Added this object to the user in addition to its already existing authorization objects. Created authorization variable in BEx.
Some how the authorization is not picked up and it gives us all the values in the report. But if I add the GL Account info object to the existing analysis authorization objects then it works fine.
I do not want to change all the existing analysis authorization objects to add GL Account.
Your inputs are most welcome.
Thanks
Ed.

Gajesh- I have added the new analysis authorization object to the user in RSECadmin.
Subhendu- Problem statement: What are the steps involved in making a new info object(GL Account) authorization relevant. Authorizations are given at hierarchy level. Can we create a new analysis authorization with GL Account only or do we have to add it to every existing analysis authorization
I have done the following steps
1. Made the GL Account object authorization relevant in RSA1,
2. Created 2 new analysis authorization objects with GL Account ( with hierarchy restrictions) and TCT objects and one with GL Account open access.
3. Added this object ( which has restrictions) to the user in RSECADMIN, in addition to its already existing authorization objects.
4. Created authorization variable in BEx.
5. No existing analysis authorization objects have been changed.
When I test the report, It does not restrict based on the hierarchy that I have given, it gives open access.
But If I add GL Account with restrictions to the existing analysis authorization object, it works good.
Guess I am missing some thing here.
Do you need any other screen shots.
Thanks
Ed.

BW Analysis authorization issue on cost center range

Hello BIW security experts
I have a problem where I created an analysis authorization on a cost center range and it looks like the interval is not working. The report is just a list of cost centers (demo to users to prove that analysis authorizations work in order to skip 2 managerial cost centers.
. Cost centers are numeric. Example: 2000100. In the drop down list they appear as such.
. I want to have the following cost center range: 1000000 to 1000771, 1000773 to 2000771, 2000773 to 9999999.
Thereofore 1000772 and 2000772 should not appear in the list.
. In the analysis authorization I have put the 3 ranges above on 3 separate lines. 'BT' is the operator. The cost centers have been selected from the drop down list.
Results: I get only 1 record from the report.... 2000772. (which is one I want to exclude..
Steps tried to debug:
. When I put a list of cost centers in the analysis authorization on separate line with the 'EQ' operator, then the report works.
. I tried putting ' ' delimiters since cost center is a char field but it fails.
. I tried adding leading and trailing zeros to fill up the char(10) but no luck.
. I tried creating a hierarchy with the interval and put it in the hierachy auth. tab and it does not work either. It gives the same number of records than the first step.
. A hierarchy with single values work.
I do not know what else to try..
Thanks.
YB.

Good morning
Here it is from RSECVAL
ZCC_TEST     0COSTCENTER                    I       BT        1000000                                                      1000771
ZCC_TEST     0COSTCENTER                    I       BT        1000773                                                      2000771
ZCC_TEST     0COSTCENTER                    I       BT        2000773                                                      9999999
ZCC_TEST     0COSTCENTER                    I       EQ        #
ZCC_TEST     0COSTCENTER                    I       EQ        :
ZCC_TEST     0INFOPROV                         I       CP        *
ZCC_TEST     0TCAACTVT                        I       EQ        03
ZCC_TEST     0TCAIPROV                         I       CP        *
ZCC_TEST     0TCAKYFNM                       I       CP        *
Thank you for your help.

BW Analysis authorization issue... need help urgently....

We have one BW query which is pulling data from Contract Division info-object. Now this report does not variable selection object so it is pulling data from all values of Contract Division. Values of Contract Division are CNC, CNS, CNE and CNL.
Now we have created an analysis auth. object called z_es_3 and added Contract division info-object. Now we have added that z_es_3 into role and given value to CNS. now when we are running report, we are getting No Authorization error. When we are giving * value in z_es_3, it is running fine.
Now we have to restrict report to contract division. please help.
Thanks in advance

Are you running unrestricted search on Contract division in your queries? You should restrict it to value which is maintained in the authorization for the InfoObject.
Also please run the analysis authorization trace from RSECADMIN. That will give you a clearer picture of what is wrong.

BW Analysis Authorization on two charcteristics issue

I am familiar with analysis authorizations in BW 7.0 and worked on it.
Today we have blanket authorization (RSECADMIN) for 0TAX_NUMB = *. Meaning user who has this auth/role can see values (from where ever 0TAX_NUMB is used, all company codes etc). And as you might know 0TAX_NUMB is used in 0VENDOR & 0CUSTOMER master data (as an attribute). This works well, because its easy
Now, new requirement is to create more strict analysis authorizations for 0TAX_NUMB based on other characteristic values.
Auth1 (should apply to 0TAX_NUMB used in 0VENDOR):
0TAX_NUMB = all values and only for vendor account group = XXX
Auth2 (should apply to 0TAX_NUMB used in 0VENDOR):
0TAX_NUMB = all values and only for vendor account group = yyy
Auth3 (should apply to 0TAX_NUMB used in 0VENDOR):
0TAX_NUMB = all values and only for vendor account group = zzz
Auth4 (should apply to 0TAX_NUMB used anywhere other than 0VENDOR, for example, as I said above its also used in 0CUSTOMER and may be used elsewhere in future):
0TAX_NUMB = all values
Do I also need to add 0CUSTOMER here? unable to visualize!!!
Also, 0TAX_NUMB and Vendor account group will have colon authorization.
So, at this time I am not sure how this will impact other queries with following scenario(s):
User1 has auth1:
Here, User1 can see tax_numb values for vendor act grp XXX, thats good, so far.
But can user see query results where tax_numb is not used but would like to see all vendor account group related data (or other than value XXX)?
User2 has auth4:
Since this auth has blanket tax_numb, can user2 see all values for tax_numb used in 0CUSTOMER (which he/she should) and also in 0VENDOR (he/she should not)...
And what about queries that do not have 0TAX_NUMB (but infoprovider has)? Colon auth on TAX_NUMB & Vendor act grp would resolve this?
I appreciate your thoughts on this. We are BW 7.01 (Ehp1), SPS10.
Regards
-Bala
Edited by: Bala Shetty on Dec 15, 2011 12:02 AM
Edited by: Bala Shetty on Dec 15, 2011 12:04 AM
Edited by: Bala Shetty on Dec 15, 2011 12:05 AM
Edited by: Bala Shetty on Dec 15, 2011 12:09 AM

Thank you Sushant.
I am aware of these notes and provide basic information and also usage of value restrictions. I am looking for usage of different combinations for multiple characteristics (especially the attributes of master data)....
Regards
-Bala

Analysis Authorization - Assignment Issue

Similar Messages

Maybe you are looking for