Analysis Filters fail within large reports

Hi
I hav a WebI report with 8 Report/Analysis filters which works fine when smaller amounts of data si viewed.
But when the report is run fror a larger amount of data resulting in a 1000 + pages the selections in the Analysis filters fail to work.
Has anybody encountered this problem and is there any sulotion but to select a smaller amount of data.
/Stefan

Well we discovered what the problem was.
It was caused by a only partly upgraded environment to SP3.
The upgrade from BO XI Edge 3.1 to SP3 seemed to succeed without giving no error messages but InfoView was not upgraded wich CMC and WebI designer was.
If I had worked with SP3 previously I had reacted directly at the graphical differences between InfoView and CMC.
So this problem had nothing to do with amount of data or number of pages.
To solve the problem we reinstalled the environment with BO XI Edge 3.1 SP3 full version.

Similar Messages

Oracle 10g Discoverer Reports & export to xls fails for large reports

Hi ,
We have following configurations:
1: RHEL 5.4
2: Discoverer :Version 10.1.2.48.18
3: Oracle10g Apps Version : Version 10.1.2.0.2
Issue:
Most of small reports works fine ....but when large discoverer reports are executed the page
keeps on refreshing for 15-20 hours but no output ....same for export to xls ......
But same reports works fine in oracle9i for same data voulme....
Observations:
When on linux with top command the processes are monitored its observed that discoverer process
dis51ws dies for large reports after 1-2 minutes ...& the page keeps on refreshing but no output....
for 1-2 minutes it consumes 50-80% cpu utilisation then process disappears & cpu 80% idle ...
It seems that as 10g Apps is installed on RHEL 5.4 ...non certfified OS causing an issue...
Can any one adds more inputs in this regards......
we have checked logs : below are log details :
Below logs gives "Logkeys: exceptions discoiv.servlet_exceptions" for this report ...
1:
OC4J~OC4J_BI_Forms~default_island~1:
10/04/11 12:11:29 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
10/04/11 12:11:59 Using oracle.reports.util.EnvironmentGlobal class
10/04/11 14:23:37 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:23:38 Discoverer Model - 10.1.2.48.18
Session ID:2010041114240115278
10/04/11 14:25:42 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:25:42 Discoverer Model - 10.1.2.48.18
Session ID:2010041114254315439
10/04/11 14:28:53 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:28:54 Discoverer Model - 10.1.2.48.18
Session ID:2010041114285615691
10/04/11 14:29:13 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:29:13 Discoverer Model - 10.1.2.48.18
Session ID:2010041114291315728
10/04/11 14:32:35 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:35 Discoverer Model - 10.1.2.48.18
Session ID:2010041114323615949
10/04/11 14:32:48 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:32:48 Discoverer Model - 10.1.2.48.18
Session ID:2010041114324815982
10/04/11 14:34:44 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:44 Discoverer Model - 10.1.2.48.18
Session ID:2010041114344616128
10/04/11 14:34:55 Logkeys: exceptions discoiv.servlet_exceptions
10/04/11 14:34:55 Discoverer Model - 10.1.2.48.18
Session ID:2010041114345516155
10/04/11 14:36:25 Tutalii: /oracle10gas/app/oracle10g/discoverer/lib/discoverer5.jar archive
2:
Discoverer~SessionServer~12
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Active Eul: EULADMIN
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
Calling GetData on Preference Repository
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
DCSCORBAInterface::Delete called
DCSCORBAInterface destructor called
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
ASSERT [email protected]:436
3:
application.log
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Finding async request action forward
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Calling externalize
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_TOOL: dvtb xk-1ml versionzw1.0w kyxdvtbyxbisltyxbicho vzwwjyxjbisltyxjdvtby
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: dv xk-1ml versionzw1.0w kyxdv bazw0w cszw25wyxpc vzw1wjyxjdvy
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_VIEW: lc
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_HS: dvhs
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.WorksheetModel.getStateString EXT_DS: dv_ds &qls_z!2=New GL Report.Clndr Id&arq=false&qls_x!14=Sheet 1.Closing Balance (Credit)&qls_x!3=New GL Report.Voucher No&qls_z!3=New GL Report.Frm Prd&fm=xml&qls_z!4=New GL Report.To Prd&qls_x!2=New GL Report.Prd Desc&qls_x!11=Sheet 1.Debit Amount&qls_x!4=New GL Report.Gl Voucher No&qls_x!9=Sheet 1.Opening Balance Debit&tss_s!0=New GL Report.Acct Id,lh,group,false&qls_x!1=New GL Report.Acct Sdesc&qls_z!1=New GL Report.Loc Desc&qls_x!10=Sheet 1.Opening Balance (Credit)&qls_x!12=Sheet 1.Credit Amount&aow=false&qls_x!7=New GL Report.Shrt Code&qls_x!13=Sheet 1.Closing Balance (Debit)&qls_x!6=New GL Report.Pmt Rct Dt&qls_x!8=New GL Report.Dtl Nrtn&sss=true&qls_x!5=New GL Report.Voucher Dt&qls_x!0=New GL Report.Acct Id&qls_z!0=New GL Report.Loc Id&ddsver=1
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.model.ViewerModelImpl.externalize [EXTERN_STATE]: $wksht$%24dv_ds%24%26qls_z%212%3DNew+GL+Report.Clndr+Id%26arq%3Dfalse%26qls_x%2114%3DSheet+1.Closing+Balance+%28Credit%29%26qls_x%213%3DNew+GL+Report.Voucher+No%26qls_z%213%3DNew+GL+Report.Frm+Prd%26fm%3Dxml%26qls_z%214%3DNew+GL+Report.To+Prd%26qls_x%212%3DNew+GL+Report.Prd+Desc%26qls_x%2111%3DSheet+1.Debit+Amount%26qls_x%214%3DNew+GL+Report.Gl+Voucher+No%26qls_x%219%3DSheet+1.Opening+Balance+Debit%26tss_s%210%3DNew+GL+Report.Acct+Id%2Clh%2Cgroup%2Cfalse%26qls_x%211%3DNew+GL+Report.Acct+Sdesc%26qls_z%211%3DNew+GL+Report.Loc+Desc%26qls_x%2110%3DSheet+1.Opening+Balance+%28Credit%29%26qls_x%2112%3DSheet+1.Credit+Amount%26aow%3Dfalse%26qls_x%217%3DNew+GL+Report.Shrt+Code%26qls_x%2113%3DSheet+1.Closing+Balance+%28Debit%29%26qls_x%216%3DNew+GL+Report.Pmt+Rct+Dt%26qls_x%218%3DNew+GL+Report.Dtl+Nrtn%26sss%3Dtrue%26qls_x%215%3DNew+GL+Report.Voucher+Dt%26qls_x%210%3DNew+GL+Report.Acct+Id%26qls_z%210%3DNew+GL+Report.Loc+Id%26ddsver%3D1%24dv%24xk-1ml+versionzw1.0w+kyxdv+bazw0w+cszw25wyxpc+vzw1wjyxjdvy%24wd%24false%24lc%24%24dvtb%24xk-1ml+versionzw1.0w+kyxdvtbyxbisltyxbicho+vzwwjyxjbisltyxjdvtby%24wvs%241101%24dvhs%24$cn$&vct=svd&cnk=cf_a101$ap$%26df%3D%26l%3D%26s%3D%26nc%3D%26dl%3D$expl$&sp=&node=&event=focus&state=(117)&root=63&wbt=2$prid$NEW_GL_REPORT%2F31$ctyp$viewer
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Storing state
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Externalize Perf: 8ms
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving Attributes
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving ApplicationRequest
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Checking for SSO mode
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Saving errors, messages
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Returning final forward: "/ExportProgress.uix" redirect: "false"
10/04/11 14:37:25 discoverer: [TRACE] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute ----------------------- End Request --------------------------
10/04/11 14:37:25 discoverer: [INFO] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.framework.ApplicationController.execute Total Request Time in AppCtrl: 18
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] org.apache.struts.action.RequestProcessor.processForwardConfig processForwardConfig(ForwardConfig[name=long running operation,path=/ExportProgress.uix,redirect=false,contextRelative=false])
10/04/11 14:37:25 discoverer: [DEBUG] [AJPRequestHandler-ApplicationServerThread-17] oracle.discoverer.applications.viewer.view.DiscovererPageBroker.isCacheable Setting cacheable to: true
4: XML log:
log2010041114285615691.xml
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="TRACE"></MSG_TYPE><MSG_LEVEL>5</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Return DCSModelInterface::SendReceiveData(kScheduleInterface, inTable, outTable)
outTable = DCITable
     Length=0
]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>259</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:29:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[DCSModelInterface::SendReceiveData(kScheduleInterface)]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS </MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcsmdli.cpp</FILE_NAME> <LINE_NUMBER>226</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:29:13 2010
</LOG_TIME> <LOG_SIZE>0</LOG_SIZE> <EXTRA_INFO><MethodEnd duration="0.1" sizeChange="0" >
real 0m0.1s
user 0m0.900s
sys 0m0.109s
</MethodEnd></EXTRA_INFO> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer stopped.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>184</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
<MESSAGE><HEADER><TSTZ_ORIGINATING>2010-04-11T14:37:13+00:00</TSTZ_ORIGINATING> <COMPONENT_ID>DISCOVER</COMPONENT_ID> <MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE><MSG_LEVEL>4</MSG_LEVEL> <HOST_ID>2010041114285615691</HOST_ID> <MODULE_ID>DCS</MODULE_ID> </HEADER> <PAYLOAD><MSG_TEXT><![CDATA[Timer started.]]></MSG_TEXT> <SUPPL_DETAIL><![CDATA[
<MSG_GROUP>DCS</MSG_GROUP> <PROCESS_ID>15691</PROCESS_ID> <FILE_NAME>dcstim.cpp</FILE_NAME> <LINE_NUMBER>162</LINE_NUMBER> <THREAD_ID>-1283799360</THREAD_ID> <LOG_TIME>Sun Apr 11 14:37:13 2010
</LOG_TIME> ]]>
</SUPPL_DETAIL> </PAYLOAD> </MESSAGE>
Regards,

Hi ,
as per Note: 466697.1 ....its an memory error....& need to increase MaxVirtualDiskMem and MaxVirtualHeapMem
But we already have slowly increased MaxVirtualDiskMem and MaxVirtualHeapMem to below very high values ...but the issue remains same.......
as per note we are getting Logkeys: exceptions discoiv.servlet_exceptions error but
after that we are not getting below error ............
Unexpected error in state machine: java.lang.OutOfMemoryError
Hence I presume that its different issue rather than memmory....
Below are pref.txt values..........
CacheFlushPercentage          = 25          # Percent of cache flushed if the cache is full. valid values 0 - 100%.
MaxVirtualDiskMem          = 9294967296     # Maximum amount of disk memory allowed for the data cache. Should be greater than or equal to MaxVirtualHeapMem
MaxVirtualHeapMem          = 4294967296     # Maximum amount of heap memory allowed for the data cache.
QueryBehavior = 0          # Action to take after opening a workbook (0 = Run Query Automatically, 1 = Don't Run Query, 2 = Ask for Confirmation)
Also we have raised an SR & as per SR .............all below settings are tried as per SR except for applying a recent patch....
====================================================================
Discoverer performance is largely determined by how well the database
has been designed and tuned for queries.
A well-designed database will perform significantly better than a poorly
designed database.
Workbook design can also affect query performance.
1. Apply latest Discoverer patch as documented in <<Note:237607.1>>
'ALERT: Required and Recommended Patch Levels For All Discoverer Version'.
2. Increase the maximum JVM heap memory:
In general, the default values for the minimum heap (-Xms) memory and
maximum heap (-Xmx) memory are sufficient.
However, if your organization consistently runs large Discoverer queries
then you may benefit from increasing the maximum heap memory from the
default values.
This is recomended if your users are typically running large queries via
Discoverer Viewer.
Increasing the JVM memory can help to avoid "java.lang.OutOfMemoryError"
in Discoverer Viewer:
Please see <<Note 563960.1>>, Best Practice: Configuring The
OC4J_BI_Forms JVM For
Discoverer Viewer/Portlet 10g Performance And Stability for specific
details.
3. Disable Query Prediction:
Query Prediction provides an estimate of the time required to retrieve
the information in a query.
The Query Prediction appears before the query and consumes time.
Edit the <oracle_home>/discoverer/util/pref.txt on the middle-tier
server and set:
QPPEnable=0
Also set:
QPPObtainCostMethod = 0
4. Uncheck the 'Enable fantrap detection' checkbox.
When the box is checked, every query generated by Discoverer is
interrogated. Discoverer will detect a fan trap and rewrite the query to
ensure that the aggregation is done at the correct level.
Please refer to <<Note:210553.1>>, Oracle BI Discoverer: Fan Trap
Resolution - Correct Results
Everytime for more information on fantraps.
To disable, in Plus go to Tools -> Options -> Advanced -> Fan Trap
settings.
In Viewer go to Preferences and uncheck the box.
5. Disable Materialized Views/Summaries
In pref.txt add parameter:
MaterializedViewRedirectionBehavior = 0
Value equal to 0 ensures that Materialized View (MV) Redirection is
always performed when MVs are available.
6. Improve query performance by optimizing the SQL.
In pref.txt modify/add following parameters:
SQLFlatten = 0
SQLItemTrim = 0
SQLJoinTrim = 0
UseOptimizerHints = 0
If value of SQLFlatten is 1 then Discoverer will merge inline views in
the query SQL where ever possible.
In case of SQLItemTrim, Discoverer will remove unused folder items from
the query SQL where possible and for SQLJoinTrim Discoverer will remove
unnecessary joins from the query where possible.
UseOptimizerHints will add Optimizer hints to SQL if set >
0.Unnecessarily making Discoverer perform these checks consumes
resources and rather than increasing the performance may reduce the same. So unless you feel these checks have to be performed depending on
requirements, assign zero to these parameters.
7. When Discoverer builds a query, Discoverer makes a database security
check to confirm that the user has access to the tables referenced in
the folders. Avoiding this check can save time.
So in pref.txt underDatabase section add:
ObjectsAlwaysAccessible = 1
8. Whenever you are creating conditions, ensure that you match the Case.
This in turn can reduce the time Discoverer spends on changing the Case
and matching.
For example:
option Upper(Department) in (Upper('VIDEO SALES')
9. Ensure that summaries are refreshed periodically in Discoverer
Administrator.
10. Increase the amount of memory available for the Discoverer data cache. Please refer to <<Note 245752.1>>, Explaining Oracle BI Discoverer
Session Memory Management
And Server Cache Settings.
11. Performance may be enhanced by enabling OracleAS Web Cache.
==================================================================
Thanks for your reply....................
Regards,

Crystal Reports 10 Enterprise Server Issue - Exporting Large Reports to PDF

Weu2019re implementing a Crystal Reports 10 Server for a customer but weu2019re having an issue with exporting large reports to PDF. The report size that starts to show this issue is roughly 300 pages with 20 records per page. We use the default Crystal ActiveX viewer.
Basically what happens is that the user will launch the report in the ActiveX viewer and the large report will take a while to load, as much as 3 to 4 minutes. The user may then wish to export to PDF. Once they attempt it with these large reports the viewer will basically hang and possibly be processing but will then time-out after roughly 5 minutes with this error:
u201CProxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /thinqreports/THINQCrystalInterface.asp.
Reason: Error reading from remote server
IBM_HTTP_Server/6.1.0.9 Apache/2.0.47 (Unix) Server at lmsproxy.aurora.org Port 443u201D
We believe this error is coming from a server on our network. We have a proxy server between users and the Crystal Server that has a 5 minute time-out for connections. What we want to know is:
- Is there a way to speed up this export to PDF process?
- Should the Crystal Viewer be keeping an http connection alive to the Crystal Report Server while its doing this export process?
- If not, what port does Crystal Viewer use to communicate with the Crystal Report Server?
- Is there something we can set in Crystal to keep an http connection open?
- What is actually occurring during this export process?
Occasionally, we may get the above error when simply launching a report, not just attempting to export to PDF. We presume that is because loading the report into the Crystal Viewer from the Crystal Report Server is taking longer than 5 min.
Anyone have any thoughts? Thanks.
Scott

Scott,
As this is happening within Enteprise (and I am assuming the report does not time out in the Crystal Reports Designer) I would suggest posting this to the BusinessObjects Enterprise Administration
forum.
My limited Enterprise knowledge would be to suggest scheduling the report as PDF but I don't know if that is a viable option for you.

500 Internal Server Error when including a JSP within a Report JSP

Hello,
Please help me. Thanks in advance.
My setup is entirely 10g. (Database, Application Server - Infra, OC4J etc)
When i am trying to include the content of a normal JSP within a Report JSP, i am getting an Internal Server Error.
Am attaching the trace here.
[Thu Aug 04 23:25:06 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183506781,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:42 2005] [notice] FastCGI: process manager initialized
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0085: connect() returns: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0088: connect() returns error: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (0)The operation completed successfully:
MOD_OC4J_0051: Tried 1 times and failed to connect to oc4j with worker: home_15.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0030: Failed to connect an
oc4j process. This request is recoverable.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0026: Failed to marshal a request
to ajp13 message headers or send them to the web container.
Kindly reply a solution soon. I am in an urgent need to resolve this.
Thank you very much.
Regards
AB

Hello,
Please help me. Thanks in advance.
My setup is entirely 10g. (Database, Application Server - Infra, OC4J etc)
When i am trying to include the content of a normal JSP within a Report JSP, i am getting an Internal Server Error.
Am attaching the trace here.
[Thu Aug 04 23:25:06 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183506781,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535578,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535609,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:35 2005] [warn] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0187: Failed to find an oc4j
process within destination:[home] and island id: default_island for session failover.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0150: Failed to deterministicly
find a failover oc4j process for session request for island: default_island for destination: home.
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0119: Failed to get an oc4j
process for destination: home
[Thu Aug 04 23:25:35 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183535687,2] MOD_OC4J_0013: Failed to call destination:
home's service() to service the request.
[Thu Aug 04 23:25:42 2005] [notice] FastCGI: process manager initialized
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0085: connect() returns: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (10061)No connection could be made because
the target machine actively refused it: MOD_OC4J_0088: connect() returns error: -1.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] (0)The operation completed successfully:
MOD_OC4J_0051: Tried 1 times and failed to connect to oc4j with worker: home_15.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0030: Failed to connect an
oc4j process. This request is recoverable.
[Thu Aug 04 23:25:50 2005] [error] [client 127.0.0.1] [ecid: 169.254.171.3:94461:1123183549640,2] MOD_OC4J_0026: Failed to marshal a request
to ajp13 message headers or send them to the web container.
Kindly reply a solution soon. I am in an urgent need to resolve this.
Thank you very much.
Regards
AB

"Failed to open report" error while running reports using Crystal Report

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi,
Use the close and dispose method for Report object. Its a best practice to code also gc.collect for garbage collection.
It might help you!!
Regards,
Amit

"Failed to open report" error while running reports

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi Balla
If you face this issue only while running the reports from a .Net web application, then please post this thread to the sdk development forum.
You can follow the link below:
https://www.sdn.sap.com/irj/sdn/businessobjects-sdk-forums
Thanks

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Using stored procedures within Crystal Reports

Hello all,
Background Information:
I am trying to teach myself how to execute a stored procedure within Crystal Reports. This is an aspect of Crystal that my work group has not utilized before and we're trying to gather information on the subject. We use Oracle to create and execute functions and procedures all the time, but I've never tried this within Crystal.
I use the "Add Command" functionality within Crystal on most of my reports so that I can taylor the sql to the report. I find this easier to do versus using the ODBC connection to the tables and writing the code through the Crystal Reports wizard. I also frequently use functions within these sql statements that are inserted in the Add Command.
What I'm trying to achieve:
I have a report that needs to run as a "trial", and then later as a committed "run". This is for a monthly billing system. Essentially, the user will run the report as the "trial", preview the data, make any necessay corrections, and then later, run the actual billing run. Within my application, the bills are not actually marked as "billed" until they are actually "billed', if that makes sense. As a result, the "trial" report will need to mark the bills as "billed", generate the report, and then rollback the data (so that the bills are not "billed". Once the actual billing reports are ran, the same report will run, but with a "commit" at the end of the report so that the bills are now "billed".
I'm trying simple tests and failing (i.e. taking baby steps to learn what capabilities Crystal has):
I created as simple of a procedure as I can envision. This procedure inserts the word "test" in one of my fields for a provided account number. When I try to run this procedure via Crystal (via New Report ->History->My ODBC Database link->Stored Procedures), Crystal asks for the account number parameter, as it should. But I then receive the error message:
Database Connector Error: '42000:[Microsoft][ODBC driver for Oracle]Syntax error or access violation'
The existing ODBC connection has work great for years and years to retrieve data from tables, but this is the first time I've tried to utilize procedures. Can anybody help? And can anybody explain what the Stored Procedures link is supposed to do? Am I going down the right path?
thanks,
Noel

Hello,
Make sure the Oracle client install path is in the PATH statement. And also make sure you are using an IN/OUT cursor. CR only reads the last SELECT statement. Search the Documents area on how to create a Stored Procedure.
Also, if you are using CR XI ( 11.0 ) then upgrade to CR XI R2 and apply all service packs ( SP 6 ). Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
It may fix your issue also.
Thanks again
Don

Failed to refresh reports

Post Author: Ahmed Yakout
CA Forum: .NET
Hi all,i
developed a .net application with vs2005 embedded in it 2 crystal report viewers
for 2 crystal reports that get their data from an oracle DB,when running this
app and trying to refresh any report,i get the error msg :"Failed to
load database information. Details: The database DLL 'crdb_oracle.dll' could not be loaded"i checked this msg on nearly all forums tried the solutions but invain.oracle client is installed and configured to see the DB,the PATH variable is set to oracle client bin directory.what makes me really confused is that these reports run normally from within crystal reports and refresh without any errors.

Post Author: dml256
CA Forum: .NET
I don't think this DLL is related to the Oracle Client. Rather, i think you are missing a crystal reports reference. However, i did find this workaround on the Oracle forums. To add Grace Days in Payment terms
__________________________________________________________________________You might need something like this;using CrystalDecisions.CrystalReports.Engine;using CrystalDecisions.Shared;The way we've used Crystal Reports and asp.net is to populate a dataset with the data we need to display and then pass that to the reportReportDocument crReportDocument;crReportDocument = new ReportDocument();crReportDocument.Load(Request.PhysicalApplicationPath + "Combined.rpt", OpenReportMethod.OpenReportByTempCopy);crReportDocument.SetDataSource(ds);i.e we don't use any of the crystal data access stuff, just our normal odp.net.Perhaps you could consider this.

Performing searches and scrolling within a report using Plus and Viewer

Hi All:
In Discoverer Plus and Viewer, is there a way to do searches within a report?
Also, if I have a report that has multiple pages, as much as I can adjsut the row number, is there a quick way to get from the beginning to the end of the report and vice versa without using the Down/Up option?
thanks .... cm

Hi cm
In Plus, you can click the Search button, it has the icon of a Torchlight. This brings up a new dialog box that allows you to search through the report. Because Viewer is an HTML page it has no similar feature. If the whole report is on screen you can the browsers own search facility by pressing CTRL-R.
As for getting to the last page in Viewer, that functionality was added as an enhancement during the release of 10.1.2.2 cumulative patch 2 and has been continued into 10.1.2.3
Here are the notes from CP8:
Enabling Bug 5639863 - ENH: NEED OPTION TO NAVIGATE TO LAST PAGE IN VIEWER
Introduced UI for page navigation, using which a user can navigate to first/previous/next/last/specific page of the worksheet in Viewer. A new config parameter, named ‘pageNavigation’ has been added in configuration.xml as part of this enhancement.
It is a Boolean parameter, which when set to true, the page navigation toolbar will appear in the Viewer page, else not. It has been added owing to the fact that non-incremental query has to be run for showing the page serial number information correctly, thus resulting in relatively more show-up time of worksheet (based on how large the worksheet is) for the first time its rendered. It is recommended to set this parameter as FALSE, because setting it to true makes the query non-incremental, which is a performance trade-off.
And some additional commentary from CP2:
The default is FALSE. If you wish to use this UI, then you may notice a performance trade off for very large queries when the query initially runs compared to the default 10.1.2 functionality. The trade off is that it is much easier and quicker to navigate to specific pages of a large report.An example of the usage of 'pageNavigation' is given below
<viewer queryRefreshPeriod="3000" queryRequestTimeout="1000"
longRequestRefreshPeriod="6000" longRequestTimeout="10000"
userDefinedConnections="true" logLevel="error" laf="dc_blaf"
switchWorksheetBehavior="prompt" defaultLocale="en" disableBrowserCaching="false"
enableAppsSSOConnection="false"
pageNavigation="true">
Best wishes
Michael

Error moving through large report

Post Author: dbronstein
CA Forum: General
We have an ASP.NET 2.0 app with Crystal XI R2. When we try to move to the end of a large report, we get this message:
Failed to retrieve data from the database. Details: [Database Vendor Code: 17 ] Error in File C:\WINDOWS\TEMP\annproc {72FCA892-D200-4116-9D3E-BA22AEE7DD45}.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code: 17 ]
Small reports work fine. We get the same error when we try to export the report to excel. Does anyone have any ideas for a workaround?

I believe KBase [1200141 - How to set the focus of the .NET Windows CrystalReportViewer so the report preview scrolls without clicking|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]. Unfortunately as I type this, there is something wrong with the search and I keep getting 403 errors. Below is the contents of the kbase:
*Symptom *
In Crystal Reports XI and XI R2 the report page view for a .NET Windows application will not scroll up/down with the mouse wheel.
*Cause *
This is the default behavior of the CrystalReportViewer control for .NET Windows applications but can be changed with some custom code.
*Resolution *
In order to fix this problem you must set the focus of the Windows application to the main report tab in the CrystalReportViewer control.
This action must be done in the parent form's Activated event. Below is some sample code that demonstrates how this can be accomplished.
// This is a member variable which allows us to set the focus on the first time the parent form is activated.
// The form is activated quite often and we only want to focus change to happen once.
bool m_bFirstTimeActivated = true;
private void Form1_Activated(object sender, System.EventArgs e)
   if (m_bFirstTimeActivated)
   // The CrystalReportViewer control is made up of 5 controls. The control in the first position is the PageView
   // control and is the one that needs to be modified. The PageView contains a TabControl that allows us to
   // have the main report and all subreports displayed as other tabs.
   // We set the focus to the first tab in the collection so scrolling works automatically.
   System.Windows.Forms.TabControl oTabControl = (System.Windows.Forms.TabControl) crystalReportViewer1.Controls[0].Controls[0];
   oTabControl.TabPages[0].Focus();
   m_bFirstTimeActivated = false;
Ludek
Edited by: Ludek Uher on Jul 5, 2010 11:26 AM

Timout error when schedule a large report

I received a timeout error when I scheduled a large report. To refresh and save it as an excel file, and then send to a file location. I can do that with a small report. Could I change the setting somewhere to increase the bach process time? Thanks!
Failed
External Destination:     File copy the instance with the filename: "Inventory Usage STE2008-11-20-11-48-52.xls" to the directory: "//osh_fs/share/Inventory Usage Report/STE" .
Creation Time:     11/20/2008 11:48 AM
Start Time:     11/20/2008 11:48 AM
End Time:     11/20/2008 12:08 PM
Server Used:     oshbo1.Web_IntelligenceJobServer
Error Message:     Transport error: No response from server, timeout exceeded.

Hi,
For scheduling a lrage webi report:
Go into the CCM, and then Stop the Input, Output, WebI Job Server.
In the Command line of WebI Job Server :
Before -restart add " -requestTimeout 7200000"
i.e: ......procwebi -requestTimeout 7200000 -restart.........
In the Input FRS:
Do the same as above.
........ -requestTimeout 7200000 -restart......
In the Output Server do the same as well: add -requestTimeout 7200000 before -restart.
Start all the servers.
-Shreyash.

High demand architecture, large reports, distributed printing, best practic

Hi,
I have a client with high demand for printing reports in different country regions and large reports (10000 pages some of them), today they are doing this with Oracle Reports, but the server regularly gets overloaded and some reports never complete. They use reports in PDF format.
Can you please suggest an appropriate architecture for this scenario. Or refer some documentation on Best Practices for high demand and distributed reporting?.
Case description
They have a centralized Reports Server and reports are used in different remote regions of the country.
Some reportrs have 6 pages and others may be more than 10.000 pages.
Reports server has communication with some remote facilities at 10 mbps, and some regional offices at 10mbps, but most offices connect at 512 o 1024 bps.
The idea would be having reports like "client reports" in the offices and request only "Data" to the server, so they can reduce network traffic, they believe most problems come from the fact that Reports Server sends heavy PDF thru the network causing lags and fails, some reports never complete, they have to resend them.
Some othes ideas also include : Reduce the business logic placed into reports, use of regional servers, or even they have thought in changing Reports for another tool.
Any comment or suggestion would be appreciated.
Thanks in advance for your attention.

i think better way is to keep business logic into database and generate ur reports using Forms(Oracle forms) based parameter forms and save results into temporary tables
show some progress bar status on ur forms so it will be easy for users how long they have to wait for report to generate
in reports there should not by anything more than select * from mytemptables
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

Custom Office 2007 Doc Service Errors: Too many, ignored; Filtering Failed

Hi...
We are running SES 10.1.8.4 with the MS Office 2007 workaround outlined at: http://blogs.oracle.com/searchtech/
While indexing production files, a number of the following errors were logged (cleansed to hide actual paths, files names, servers, etc.):
ERROR crawler_5 1114 files inside zip file, Too many, ignored: /.../46629_bin
ERROR crawler_5 EQG-30123: Filtering failed for "http://someserver/somefile.docx&lang=en"; trace information:
1114 files inside zip file, Too many, ignored: /.../46629_bin
It appears like all these errors are for docx files. This could just be a coincidence. We have very limited access to the files themselves due to confidentiality.
In reading the README file for the MS Office 2007 document service, ZIP is one of the required document types for this workaround. Specifically,
the OfficeX files are XML packaged in zip format, so you must tell SES to index zip files
Is the custom MS Office 2007 document service not able to index certain docx files?
Are these files too large and/or complex for indexing?
Any guidance is appreciated.
Thanks!

More information. All the documents that throw this error are between 9.5 - 13.5 MB in size.

Can't connect my HP Photosmart c309g-m printer to my Linksys WRT54GC router. "No filtering = FAIL"

I'm having trouble connecting my HP Photosmart c309g-m to my Linksys WRT54GC router. The diagnostics report states "No filtering = FAIL" in all my attempts.
First I had set up the wireless security of the router with a WPA2 Personal passphrase.
Because that didn't work, I downgraded my security to WPA, since the diagnostics report suggests that that's what it's actually using for encryption. This didn't work either.
I double and triple checked the MAC address of the printer in my Wireless MAC filter settings. It was correct. However, it still didn't connect.
Grudgingly, I turned MAC filtering off. However, the printer still wouldn't connect.
Now I'm out of options. Any possible ideas for this problem?
This question was solved.
View Solution.

Here are a few ideas:
1. Make sure the SSID is being broadcast.
2. Make sure that DHCP is active.
3. Do not use MAC filtering (it is not a good security measure, anyway).
4. Change the router channel to 11.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Analysis Filters fail within large reports

Similar Messages

Maybe you are looking for