ANALYSIS method for CCh(ChannelName,StatValueIndex)?

Hi,
I am trying to compute a simple mean of a channel and usually use CCh(ChannelName,StatValueIndex), where StatValueIndex = 0. Is this available somewhere on the DIAdem ANALYSIS panel?
Thank you!
Julia

Hello Julia,
The cch() Function belongs to the calculator which, of course, can be called inside the ANALYSIS module. But if you are looking for a specific dialog in one of the ANALYSIS menus, I am afraid I have to dissapoint you. If you want to calculate the mean value interactively, you can use the option inside the statistic dialog - which calls a different function to get the result though.
Alternatively, you can always create a custom dialog with the SUD tool.
I am not sure if I got qour qestion 100% right, so if that does not answer it, just reply.
Regards
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

Similar Messages

Differance amoung the Valuation Methods for Result Analysis

Dear All,
In SAP Product Cost Controlling ther are 3 types of Cosings
1. Production Cost by Order
Path:- Production Cost by Order ---> Period end Closing ->WIP->Defind Valuation Method for( Actual Cost)
2. Production Cost By Period
Path:- Production Cost by Period ---> Period end Closing ->WIP->Defind Valuation Method for ( Target Cost )
3. Production Cost by Sales Order
Path :- Production Cost by Sales Order ---> Period end Closing --->Defind Valuation Method for Result Analysis.
Note: Here the point is Valuation Methods ( 1 to 17 ) availabel in Production Cost by Sales Order only. The Valution Method is very important to Calculate WIP. Different Countries follows different methods, but in the By Order and By Period we can get these Valuation Methods. What would be the reasno behind this.
Regards

Dear All,
Any one have any ieda

Which Results Analysis Method is good for LOSS Projects?

Dear Experts,
Our client have Loss projects scenario.
for Eg. Plan Revenue_: 100,
Plan Cost__________: 120
Loss______________: = -20
Loss 20 should post in accounts at first period end closing time itself for that which Results Analysis Method can help me for it. Plz give me your valuable solution soon.
Thanks
Bhagirath

Hi,
which RA Method you are using.
If you are using method 01 then in OKG8,Choose RA Cat RIML(Reserves for Imminent loss) or if you are using 03 method then use POCL .Assign the GL accounts againt these RA cat one B/S Account and one P&L (not a Cost element).
Muzamil

Valuation method for Reasult Analysis

Dear PS experts,
Normally what is the valuation method we are using in india. I assueme 03 is the correct valuation method for calculating wip in india. Is there any other method can u explain.
Regards

Hi,
It depends also on the following points:
1.If you are using Milestone Billing or Partial Billing use Method 01,02 or 03.
2.If you using RRB then go for method 14 or method 15.
3.If you want to calculate RA on the basis of Progress then use progress bases method.
Muzamil

Result analysis method

hi dear,the expert mode is active for one RA key,then how can i know the original result analysis method used in this key?because i can not display view of "simplified maintenance of valuation method" after expert mode used

Hi,
In your RA key definition, in column, Valuation...
change valuation basis to J - Cumulative Actual Costs, Cumulative Actual Revenues

Methods for Remote Event Log Collection (WMI vs RPC vs WinRM)

Hi,
I'm currently evaluating several 3rd party tools (SIEMs) to help me with log management in a large (mostly) Windows domain environment. Each tool uses a different approach to collecting the event log from remote systems, and I'd like help understanding the
pros and cons of each approach. I've dropped this in the scripting forum as the tools are essentially running different scripts and it's this part I would like to understand.
WMI: An agent installed on a windows server connects to each monitored box and grabs their event logs via WMI. Our legacy SIEM already collects from over 2000 servers using this method.
RPC: As above, but using RPC. No changes required on the remote machines.
WinRM: An appliance integrates with AD and collects event logs remotely using WinRM. This is reasonably new to me (i'm a security guy, not a sys admin) but I seem to have to enable an additional remote management tool, and open a new listening port on every
single machine I want to collect the event log from.
I read the following blog entry, which seemed to indicate that RPC was the best choice for performance, considering I'm going to be making high frequency connections to over 2000 targets:
http://blogs.technet.com/b/josebda/archive/2010/04/02/comparing-rpc-wmi-and-winrm-for-remote-server-management-with-powershell-v2.aspx
However, everything I have found on the subject of remote event collection seems to suggest that WinRM is the "approved" method for event log collection. The vendor using the WinRM approach is also suggesting that it is the only official MS supported
way of doing this.
So I would like to ask, is there a reason that WMI and RPC should not be used for this purpose, since they clearly work and don't require any changes to my environment? Is there some advantage to WinRM that justifies touching my entire estate and opening
an additional port (increasing my attack surface)?
Thanks in advance,

Hi,
I'm aware of the push method, and may indeed move to it in time, although I'm just as likely to install a 3rd party agent on the machines to perform this role with greater functionality and manageability for the same effort. I've only seen organisations
using commercial agents (snare, splunk, etc) or WMI for log collection in practice, so I don't think I'm the only one with reservations about it.
Anything that involves making configuration changes to a large and very varied estate is not something to do lightly. Particularly if alternatives exist that don't require this change to be carried out immediately. That is why I'm looking to properly understand
the pros and cons of these "legacy" approaches for use as an interim solution if nothing more.
Pulling probably is more resource intensive, although I've not seen an actual comparison, but it's not really that fragile in my experience. If a single pull fails, you just collect the logs you missed at the next pull cycle in a few seconds/minutes.
All logs are pulled directly into a SIEM for analysis, so that part is covered.
Anyway, I appreciate the input, but I'm still holding out for concrete reasons to move away from WMI/RPC or to embrace WinRM. Bear in mind I'm considering fixing something that doesn't look broken to me!
Cheers,

Any open source of simple statistical analysis tools for java?

Hi ya,
Anyone knows any open source of statistical analysis tools for java?
A simple tool which is able to retrieve the coverage, the number of threads, and a list of methods within the code will be fine :)
Many thx

If what you mean is a profiler, you can get it from Eclipse's plugin, and it's open source.
http://sourceforge.net/projects/eclipsecolorer

Forecast future data using various analysis methods

Dear All
Is it possible that we can perform various kinds of analysis like correlation analysis,regression analysis,volatility anlysis,statistical analysis etc.on historical data and forecast future price etc for using BI. If so please let me know how preferably with an example.
Any valuable suggestions with examples of how it can be done in BI in this regard are truly appreciated and rewarded with points.
Regards
Suresh

Hi,
I saw your Message regarding forecast future data using various analysis methods. I got the same requirement. Please let me if have any Document or approach on the same.
regards
raghav

Error in Pre- Export methods for a request

Hi All,
I am getting an error while releasing a request, its giving
"Error in Pre- Export methods for a request DM0k.....". Could you please tell me why and how can I rectify that?
Thanks.
NA

Please go through as per the link
[SAP Transport Request |http://www.sap-basis-abap.com/sapbs008.htm]
thanks
G. Lakshmipathi

How to find a badi and how to find the method/methods for a transaction?

Hi all,
i need to give a text either while creating customer (vd01) or changing customer(vd02)...thsi is via extras->texts.....then I have to double clik the text and go to change editor...and then i have to clik on insert line and then choose text element radiobutton on screen and then give it a name and then save it..this should be done for all customers....my problem is i am unable to find a badi and the appropriate method for thsi..i have placed break point in method read_add_on_data in the badi customer_add_data....i tested both by transactions va01 and va02 but of no use..also there are so many methods..can u tell me how do i find the appropriate method of the appropriate badi.....

Hi,
For XD01/XD02/XD03 The following BADI's are useful
business Add-In CUSTOMER_ADD_DATA and business Add-In CUSTOMER_ADD_DATA_CS .
*<b>Reward points</b>
Regards

Aging Analysis report for open Items in SD

Hi ,
Please give the code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.
Raj

There are couple of Standard Report for Customer Open Items.
RFDOPO00 - List of Customer Open Items.
RFDSLD00 - Cutomer Balances
Also there is another standard report....
Run the Tcode 'S_ALR_87012178", that is "Customer open Item analysis by Balance of Over dues".
Copy the Report and make necessary changes.
Modification is always required to get a "good looking" aging report, there is no standard.
Hope this helps.
Vinodh Balakrishnan

Oracle.jbo.AttrValException: JBO-27019: Get method for attribute

Hi Guys,
I am trying to add a new column to Oracle quoting.It has already been customized by some consultant few years back. I followed the note 392728.1 on metalink and also have the documentation by the previous consultant but getting the error oracle.jbo.AttrValException: JBO-27019: Get method for attribute Draft in HeaderVO could not be resolved after adding my column, when I try to print the quote.
Here are the steps I took
1) added a column to the query (at the end) in HeaderVO.xml
2) added the below code in the HeaderVO.xml
<ViewAttribute
Name="DRAFT"
IsQueriable="false"
IsPersistent="false"
Precision="100"
Type="java.lang.String"
AliasName="DRAFT"
ColumnType="VARCHAR2"
Expression="DRAFT"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="100" />
</DesignTime>
</ViewAttribute>
3). Modify HeaderVORowImpl.java file to add setters and getters for the newly added view attribute. For example,
a) case 67: //
setDRAFT((String)obj);
return;
b) case 67:
return getDRAFT();
c) ublic void setDRAFT(String s)
setAttributeInternal(67, s);
public String getDRAFT()
return (String)getAttributeInternal(67);
d) protected static final int DRAFT = 67;
Everything is dont exactly as per the manual but not sure why I am getting this issue. Any help will be appreciated.

a) case 67: //
setDraft((String)obj);
return;
b) case 67:
return getDraft();
c)public void setDraft(String s){
setAttributeInternal(67, s);
public String getDraft(){
return (String)getAttributeInternal(67);
d) protected static final int DRAFT = 67;
can u change it as explained above.. setDRAFT should be setDraft.. and getDRAFT should be getDraft..
and make sure that the index.. number is exactly matching with the attribute order in the VO

Cost Analysis Report - For a range of process orders

Dear all,
Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
Thanks
Nagarajan

Dear
You can use cost analysis report like
1.S_ALR_87099932 - Variances Between Costing Runs
2.S_ALR_87099931 - Price vs Cost Estimate
3.S_ALR_87099932 - Variances Between Costing Runs
5.KOC4
Regards
JH

Analysis report for standard cost in CK33N

Hi,
Analysis report for standard cost
Using variant Z003 in CK11N.
Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
In CK33 you compare the 2011 cost for the product with the proposed cost for the next year. For some parts it works and for others it splits the lines, though the calculation is still correct.
Regards,
T.Harish Kumar

Hi Revital,
I believe the last option is correct.
Thanks,
Gordon

No data in Application failure Analysis report for a particular application alone.

Dear All,
We are not able to get the data in Application Failure Analysis report from Appadvisor for a particular application(say ABC) alone, whereas it works fine for different application. Also,we could get the data from other reports(such
as Application status,Problem distribution analysis,etc) for the same application(ABC). PFB snapshot for your reference.
Thanks in Advance.
Regards,
Rajesh Kumar C

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

ANALYSIS method for CCh(ChannelName,StatValueIndex)?

Similar Messages

Maybe you are looking for