Analytical Instrumentation labview programs, Looking for caretaker specialist

Our existing Labview software(s) need a caretaker. We like to have you to translate current Labview programs to .NET(VB) programmer. And I hope that you can tidy up existing source codes so that it can be  maintained by not-so-experienced Labview programmers. For now, we are looking at contract programmer in San Dimas, 40miles east of Los Angeles. We are bunch of scientists know programming in general. 

Great! next door. Would you be able to send me your CV ?
Our website is www.microspectra.com.
My email is [email protected]
Thanks,  Jumi

Similar Messages

  • Labview engineer looking for job in china

    I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
    more detail please contact [email protected]

    Hi Alec,
    Your organisation sponsor visa for non-local residents?

  • Just put my i-tunes library on a 2nd hard drive, how do I easily change the location where the program looks for current songs from the C:/ drive to the new drive without going thru each song individually in the "get info" tab

    I just installed a new hard drive and transfered my i-tunes library to the new drive.  How can I make a bulk change of the location the program looks for the current songs.  I know you can do it song by song from the "get info" tab but I need to do it for all 4500 songs.  I have already changed the location that new files are stored to the new hard drive.

    The pop-up lets you connect to the library file, iTunes Library.itl, on the external drive. This will, in turn, automatically update the preference for the iTunes Media folder to be the iTunes Media or iTunes Music folder inside the iTunes folder on the external drive and it will update the locations of all the content inside the media folder so that it uses the version on the external drive.
    This works seamlessly if all iTunes content was inside the iTunes Media (or iTunes Music) folder (which was itself inside the iTunes library folder) before you moved/copied the iTunes folder. For content outside the iTunes Media folder iTunes should remain connected to the original location. These files should be consolidated (before or after the move/copy) and in addition, if available the library should be upgraded to the newer layout which places iPod Games and Mobile Applications inside the media folder instead of the library folder. (File > Library > Organize Library...)
    For split libraries there are methods to rejoin them before moving (preferred) or repairing after the fact (e.g. my script) which I can go into if needed.
    tt2

  • LabVIEW Engineer looking for job

    I have attached my resume to review.
    Attachments:
    Resume.pdf ‏50 KB

    Dear Sir / Madam,
    I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
    Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
    Looking for L1/H1 Job
    Thank you for your time and consideration.
    Please find an attachment of my resume in MS-Word format.
    Sincerely yours,
    K.Sowjanya. B.Tech
    Message Edited by Support on 04-04-2008 08:39 AM

  • Problem with my program looking for the settings file in the wrong folder

    I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
    So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
    It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
    Edited by: ColNewman on Feb 5, 2008 6:55 PM

    So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
    One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
    Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

  • M.Tech and Research scholar with 2.5 year LabVIEW experiance looking for profile as LabView Developer

    I am M.tech Biomedical enginer and working as research scholar with 1 year experiance and having 2.5  years experiance of labview,vision builder and vision assistant.
    Looking for the position of labview developer in good organization..
    Mail ID:[email protected]

    Hello I wanted to bump this thread up.
    I fell time has come time to once again embark on a job search quest for me.
    What has changed since the opening thread?:
    My CLD has expired, but I intend to recertify using the CLD-R and very quickly once again to CLA. ( plan is to do it in march ).
    During my last 2 years I've worked predominatnly in LabVIEW on very high speed DAQ with insane data-rates.
    Learned how to do proper multi threading in LabVIEW and work with ginormous data -sets in the hundreds od GB,
    Learned how to do proper 64-bit labview apps, and use memory efficiently.
    Got experience working on Oil and Gas stuff. Gained Team Lead Experience.
    What am I looking for:
    Software Architect, Team Lead or Software Manager positions.
    I'm also trying to get canadian residence, which should take me approx 10 moths to sort out, but if a job offer came sooner this could boost me.
    So Canadian offers are of my particuar interest.
    US jobs, unfortunately I do not have a work permint in US, which excludes me from 90% of the jobs on this forum, if any employer has the ability to sponsor please contact tme.
    I'm an EU citizen and I do browse the EU offers all the time, but if my profile is interesting to you please don't hesitate and contact me and I'll send you my resume.
    Regards,
    WibJ

  • Experienced LabVIEW Engineer looks for part time projects

    Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
    Looks for smaller part time projects (that can be performed at distance).

    Hi,
    I have 6 years of experiences in labview application.I would like to develop the code through the internet.
    Kindly let me know if the openings still available. 

  • Are there LabVIEW programs written for electrophysiology?

    Hi,
    I'm trying to set-up an electrophysiology experiment, and I need a data aqcuisition program for my patch clamp amplifier.  I've reviewed the existing software applications (pCLAMP, CellWorks, Pulse/Patchmaster), but, since LabView is used fairly extensively in our lab I was wondering if there are any existingprograms/VIs written in LabView for data acq in an electrophysiology set-up.  I see that NI had something called BioBench for a while, but that they've discontinued it as of April 2009.  Does anyone have any ideas?  I don't really want to spend a lot of time developing something on my own, especially if there's something already available.
    Best,
    Chris

    Hi Chris,
    A number of people out there have developed LabVIEW applications for doing electrophysiology.  If you Google "LabVIEW electrophysiology" or "LabVIEW patch clamp" you'll find some stuff.
    Here's one promising lead:  LabPatch:  http://www.ionchannels.org/showabstract.php?pmid=10794680
    You can probably contact this person and get them to send you the source code (they say its "free").
    Depending on what you are actually trying to accomplish, it may be possible to start with a simple LabVIEW example program and expand from there as your needs develop.  Are you needing a "scope" like program that capture relatively fast waveforms based on some kind of trigger condition (stimulus/response) or continuous acquisition of spontaneous activity?  We also have an application called "Signal Express" which can you started very quickly and can be easily customized to do on-line processing - worth taking a look at:  http://www.ni.com/signalexpress/whatis.htm
    Here's a simpler URL for our Biomedical User Group:  http://ni.com/biomedusers
    Good luck!
    Steve
    Visit the NI Biomedical User Group at:
    www.ni.com/biomedusers

  • Senior LabVIEW Developer Looking for Moonlight Freelance Opportunities

    Hello.
    I am looking to assist a company and/or team requiring assistance with National Instruments software development. I have been working in this industry for eight years as a developer and have been managing development team for the past three. I am not looking to change my place of business. I am simply looking to moonlight and make some money on the side (I am trying to follow the Dave Ramsey plan).
    Skills:
    Requirements / Specification Documents
    Requirements Tracibility
    Large-Scale Application Development
    RT / FPGA
    Multi-cRIO 
    Industrial Sensor Control
    Source Code Control and Documentation
    Project Management
    Please reply to me here if you are interested in my services.
    - Resume Available upon Request

    Hi,
    I am currently seeking a Certified LabVIEW Developer for a Contract Senior LabVIEW Test Developer role with a UK based client we work very closely with.
    If you are currently seeking new opportunities and would like to discuss this role further, please send your C.V and a suitable time I could call you to [email protected]
    Kind Regards,
    Emily Foord

  • SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)

    SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
    Controlling launch pad equipment via PXI/LabVIEW
    Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
    Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
    Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
    Cargo configuration of Dragon capsules going to resupply the International Space Station
    Maintenance of Mission Control Centers with the help of our IT department
    With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
    Ideal candidates will have the following qualities:
    CLD-level LabVIEW experience
    A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
    Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
    Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
    Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
    About the job:
    Job is located in Hawthorne, CA in the Los Angeles area.
    This is not a 9-5 job. There will be some late nights.
    You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
    We are only hiring full time employees. Contractors need not apply.
    To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
    Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
    Message Edited by Lavezza on 03-31-2010 03:59 PM

    There is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
    Look for the position called: Mission Control Software Engineers (LabVIEW).

  • With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

    When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
    Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
    Below is the warning message from the Error Console

    I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
    View > Zoom
    If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

  • Calling external Web Service: PI is looking for a logical port and proxy.

    Hi,
    My scenario is  ECC Proxy -> PI -> External Webservice (WS adapter).
    the Web service adapter fails with the error message:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: &#39;error_text&#39;</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    When I debug the message processing, it is looking for a port in table SSRVRTCONFIG, finds it(entry created automatically when WS adapter and the corresponding receiver agreement is activated in ID.
    Then the program looks for an entry in "SRT_CFG_CLI_ASGN" for a proxy and logical port combination and errors out.
    to be able to call an external web service, do we need a proxy to be created? I tried to create but the proxy creation fails because the external WSDL has some unsupported tags.
    Also do we need to do any other configuration in SOAMANAGER? I am assuming not because the Web service is external.
    Any help would be appreciated.
    Thanks
    Vijay

    I already checked that note and made sure that the points mentioned are met. I have a trace set up on the target system and would know if the call reaches them and then fails in authorization. Right now the call doesnt even reach the target system and also from debugging I know that the program is looking for a proxy and then fails.

  • AccessControlException -- Where is it looking for my file?

    I developed part of my program using WebGain, but at my house I'm using NetBeans.
    My program (which consists of three .java class files) is using a FileReader to read in a file called "courses.txt".
    Example code:
    BufferedReader inStream = new BufferedReader (new FileReader("courses.txt"));
    When it goes to open this file, it throws an "AccessControlException".
    My courses.txt is located in the same directory as my .java files. Is this incorrect? I've tried renaming the courses.txt file to see if it sees the file at all, but it STILL gives me an AccessControlException even when the file is no longer present.
    So, where is NetBeans (my java program) looking for my file?

    I'm reading in the file from a set file name. I don't
    want the user to be able to select it.
    I'm getting an error when I do the following (as you
    suggested):
    BufferedReader inStream = new
    BufferedReader(getClass().getResourceAsStream("/courses
    txt"));
    The error I get is "cannot resolve symbol".Is the above line within a non-static method? If not, then replace "getClass()" with [yourclassname].class
    Also, you'll have to play with the API. Since getResourceAsStream returns an InputStream (not a Reader), you may have to wrap it with an InputStreamReader as well.
    >
    Also, how would I load an image using that method?The Image API have methods/constructors taking file names, as well as URLs. To load from the classpath, use the ones taking a URL. So, for example, instead of Image("fileName"), use Image(getClass().getResource("/filename"))

  • CLD Looking for Freelance/Consulting Work

    My name is Joe Dowdle.  I am a Certified LabVIEW Developer looking for freelance and consulting work.  I currenly work full time but am available evenings and weekends to meet and work.  The best way to contact me is by email during the day:  [email protected]  I am located in central Illinois and am willing to travel on weekends/evenings as well as work remotely.
    Below is a brief summary of my education and experience.  There is more information available on my LinkedIn profile (click here).  I have spent the last year working on NI-based (hardware and software) hardware-in-the-loop (HIL) systems for ECM software testing and am continually involved with that.
    Education:
    B.S. in Electrical Engineering, Controls/Power
    Certificate in Electric Power Engineering
    B.S. in Business Administration, Accounting/Finance
    Certifications:
    Certified LabVIEW Developer
    Engineer in Training/Engineering Intern (NCEES)
    LabVIEW Coursework:
    Core 2 & 3
    Real-Time 1 & 2
    FPGA
    Connectivity
    LabVIEW Experience:
    Real-Time
    FPGA
    Veristand (custom devices, custom controls/indicators)
    If you have any work available for me please don't hesitate to contact to discuss a timeline and rates.  As mentioned earlier, email is the best way to get a hold of me during the day ([email protected]), but I will return phone calls as soon as I can (267-536-9353).
    Sincerely,
    Joseph R. Dowdle

    I'm not in NYC but I'd be happy to help.
    Dan Mode
    --> Adobe Community Expert
    *Flash Helps*
    http://www.smithmediafusion.com/blog/?cat=11
    *THE online Radio*
    http://www.tornadostream.com
    *Must Read*
    http://www.smithmediafusion.com/blog
    "ramachan" <[email protected]> wrote in
    message
    news:eid318$t58$[email protected]..
    >I do not know if this is the right place to post this but
    i am lookig for
    > freelance actionscript guys to help me with several
    projects... insteaad
    > of
    > fishing for free advice I would rather share cash and
    have a few regular
    > actionscript guys who would like to be feed regular
    work...
    >
    > I am a freelance designer who is a bit tired of
    pretending to be a
    > developer
    >
    > [email protected]
    >
    > Thank you
    >
    > sorry if this is in the wrong place
    >

  • While opening a VI the VI is looking for itself - endless loop

    A have a VI called "DermaSR". If I open the VI Labview is looking for the included SubVI. And then the following message appears:
    "Please find the VI named "DermaSR"
    And then I have a problem. I can select DermaSR and nothing happens. Except: The messeage "Please find...
    pops up again.
    Result: I cannot open the VI. Is all my work lost ???

    RanChan wrote:
    > Was a good idea. But the permission to read, write and execute the
    > file are all set. Seems that this is a real LabView-Bug.
    >
    > By the way...
    > Does everyone know the internal structure of a labview file? Maybe
    > that I can use a HEX-Editor to fix the problem (e.g. removing all
    > subVIs from the file).
    I think there is really nobody who really knows and only a few guys at
    NI who could possibly figure it out by looking at your VI and into the
    source code for LabVIEW.
    More important the exact format changes with each new LabVIEW version
    partially.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

Maybe you are looking for