Analytics login is erroring out

Hi All,
I am trying to loign to analytics using
http://localhost:7001/analytics
Login : weblogic
I am sure the password is correct but its not loging me in.
Error :
Unable to Sign In
An invalid User Name or Password was entered.
Thanks.

Hi,
if services are all alive and getting the same login error........
Sol1:
Check MDS and BIPLATFORM users are locked or not.
If locked U have to alter the the users.
For reference follow the link
http://obiee11gqna.blogspot.in/2011/09/obiee-11g-errors-nqserror-43113.html
Sol2:
Check MDS and BIPLATFORM users are locked or not.
If they are not locked login to em
and check the internal applications are all in up or not if some services are down note the services and login to console -> click deployments ->and start the services which are in failed status.
After that just refresh the analytics page.
Please mark if it helps.
Thanks..
Edited by: 980767 on May 30, 2013 5:27 PM

Similar Messages

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

BOBJ Partner Training Catalog login errors out June 5, 2009 at 09:30 PT

BusinessObjects Partner Training Catalog login page errors June 5, 2009 at 09:30 PT
The URL https://partner.enablement.sap.com:/sap/bc/bsp/sap/z_lso_partner/login.htm was not called due to an error.
Note
■The following error text was processed in the system WLP : Error when opening an RFC connection
■The error occurred on the application server pwdf1853_WLP_02 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: DO_HANDLE_EVENT of program Z_CL_BSP_LOGIN_CONTROLLER=====CP
Method: DISPATCH_INPUT of program CL_BSP_CONTROLLER2============CP
Method: DO_REQUEST of program Z_CL_BSP_LOGIN_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: CALL_CONTROLLER of program CL_BSP_PAGE_BASE==============CP
Method: IF_BSP_ELEMENT~DO_AT_END of program CL_BSP_CALL_ELEMENT===========CP
Method: ONLAYOUT of program CLO2D4CAZHSXGQKTHE1ONREO61D6BCP
Method: %_ONLAYOUT of program CL_O2D4CAZHSXGQKTHE1ONREO61D6BCP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP

Hello,
I am now experiencing the same problem as you have. Can you please tell how you managed to solve it. Thank you.

Shared Data Source with prompted credentials - errors out.

Using Data Tools (VS 2010) to build report.
Have built a simple report while trying to diagnose this issue. This report is created in a project that was originally built in BIDS2008 and migrated to Data Tools 2010. This project contains an original shared dataset that does NOT
error out.
Report contains
     1) shared data source with properties set to prompted credentials.
     2) shared dataset using data source above
     3) 2 parameters (month and year)
     4) Report uses shared dataset
     5) 2 text boxes in the report body to display the parameters values.
When I try to preview this report I get the error:
     The execution failed for the shared data set "xxx"
     Cannot create a connection to data source 'Data source for shared dataset'
     Security processing failed with reason "3" ("password missing")
Now, if I changed that same shared dataset to use a static login and password; the report renders fine.
What is going on???

Hi RoseNeedsAVacation,
When you use shared data source with "Prompt for credential" option, please use SQL Server login credential to u view the report in BIDS or SSDT report designer environment.
Note: The shared data source will automatic switch to SQL Server authentication mode if we use "Prompt for credential" option.
After you deploy your report and shared data source to report server, please remember to configure your shared data source to use "Credentials supplied by the user running the report" option. Furthermore, select "Use
as Windows credentials when connecting to the data source" checkbox if the credentials that the user provides are Windows Authentication credentials. Do not select this check box if you are using database authentication (for example, SQL
Server Authentication).
For more information, please refer to the article below:
New Data Source Page (Report Manager):
http://technet.microsoft.com/en-us/library/ms180077(v=sql.100).aspx
Regards,
Elvis Long
TechNet Community Support

Latest version of Firefox is having problems loading sites, it tries to load to Google Analytics. No error messages, just a page that won't load. How do I stop this?

Latest version of Firefox is having problems loading some sites, it tries to load and then gets taken over trying to load Google Analytics. No error messages, just a page that won't load. How do I get rid of this, it is a "pain in the neck"
== URL of affected sites ==
http://

I just spent 3 days with this issue as well. I finally fixed it by reluctantly adding yet another add-on called ADBLOCK
I was able to selectively block google-analytics. Now pages that weren't loading before are now loading.
eg vimeo.com starbucks.com & other random sites.
This was a tough one to fix because there is NO ERROR MESSAGE..page just shows it's loading...forever..& the bottom of my browser says 'waiting for google analytics'. I finally figured out google analytics is the culprit. Ironically, some help pages in trying to find a fix wouldn't load for me due to google analytics arghhh!
Im on a macbookpro & Safari worked fine for these same sites. It was just Firefox. I nearly switched back to Safari because of this stupid issue.
I'm wondering if this was caused by recent firefox 'updates'...

Previously stable custom OAF form intermittently errors out

Gurus,
A JDeveloper form that I developed for 11i a couple of years back which has been stable up until recently is now sporadically erroring out. The form seems to work if several attempts are made to apply the back button on the browser. The error message is as follows:
Error: Cannot Display Page
(Because one of the following occured)
1. Your login session has expired.
2. A system failure has occured.
Then it suggest using the page's navigational links instead
of the browsers Back and Forward control.
It's strange that the error is just now appearing and only appears in our UAT environment. Our Dev and Prod environments appear fine.
Has anyone seen this before?
We're using 11i Applications on a Linux forms server with a 10g database.
Thanks in advance for you help.

Thanks for the responses. There was a problem with the file system (on the unix server) which was causing the cache to fail. I took the cache statements out of the project settings and could run it but the DBAs have since fixed the file problem so I have now put the cache statements back. The other form (that worked) is much smaller so I guess it did not make as much use of the cache.

Root cause for logins were timed out in Asychronous mirroring

We have SQL Server 2008 Sp3 64 bit server with asynchronous mirroring on two databases. The mirroring was active and inactive continuously for more than 1 hour and suddenly the logins were timed out on principal server.
So now we are trying to find the root cause.
Any help.
2014-12-10 14:51:07.880 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:52:04.310 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:52:55.650 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:52:57.760 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:54:19.820 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:54:24.550 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:54:47.590 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:55:22.070 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-0000109C-0000'}).
This is an informational message only. No user action is required.
2014-12-10 14:55:42.520 Backup Log was backed up. Database: opale, creation date(time): 2010/03/06(08:36:00), first LSN: 3689101:41595:1, last LSN: 3689101:56840:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-0000109C-0000'}).
This is an informational message only. No user action is required.
2014-12-10 14:55:59.680 Backup Log was backed up. Database: opaleGmao, creation date(time): 2010/06/29(16:37:36), first LSN: 2925:158:1, last LSN: 2925:160:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-0000109C-0000'}).
This is an informational message only. No user action is required.
2014-12-10 14:56:44.210 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:57:15.630 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:58:21.590 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 14:58:26.690 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 14:59:13.700 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 14:59:14.360 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:02:57.610 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:03:00.790 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:05:12.290 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:05:12.290 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:05:12.290 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:05:20.880 spid17s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:05:20.880 spid17s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opale" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:05:20.880 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:05:27.160 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:05:28.990 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:06:34.870 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00000954-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:06:46.360 Backup Log was backed up. Database: opale, creation date(time): 2010/03/06(08:36:00), first LSN: 3689101:56840:1, last LSN: 3689101:59770:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00000954-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:07:00.970 Backup Log was backed up. Database: opaleGmao, creation date(time): 2010/06/29(16:37:36), first LSN: 2925:160:1, last LSN: 2925:162:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00000954-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:08:46.420 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:09:10.970 spid270 Error: 18056, Severity: 20, State: 29.
2014-12-10 15:09:10.970 spid270 The client was unable to reuse a session with SPID 270, which had been reset for connection pooling. The failure ID is 29. This error may have been caused by an earlier operation failing. Check the error logs for failed
operations immediately before this error message.
2014-12-10 15:09:14.150 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:10:00.480 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:10:54.230 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:11:21.600 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:12:20.080 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:12:20.080 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:14:46.840 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:15:20.320 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:15:20.320 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:17:42.800 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:19:31.640 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:20:14.340 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:20:41.920 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:20:41.920 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:20:48.890 spid17s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:20:48.890 spid17s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opale" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:21:49.320 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:22:02.610 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:22:33.170 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-000016F0-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:23:06.950 Backup Log was backed up. Database: opale, creation date(time): 2010/03/06(08:36:00), first LSN: 3689101:59770:1, last LSN: 3689101:77104:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-000016F0-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:23:23.960 Backup Log was backed up. Database: opaleGmao, creation date(time): 2010/06/29(16:37:36), first LSN: 2925:162:1, last LSN: 2925:164:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-000016F0-0000'}).
This is an informational message only. No user action is required.
2014-12-10 15:23:29.140 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:23:29.140 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:23:37.940 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:24:29.800 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:26:18.620 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:26:29.890 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:26:29.890 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:27:14.050 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:28:45.470 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:31:49.750 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:31:49.760 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:32:50.710 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:36:38.300 spid17s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:36:38.300 spid17s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opale" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:36:41.770 spid18s Error: 1479, Severity: 16, State: 1.
2014-12-10 15:36:41.770 spid18s The mirroring connection to "TCP://SMSNDCOPALSQLP2.eua.bvcorp.corp:5022" has timed out for database "opaleGmao" after 10 seconds without a response. Check the service and network connections.
2014-12-10 15:36:41.780 spid18s Database mirroring is inactive for database 'opaleGmao'. This is an informational message only. No user action is required.
2014-12-10 15:38:04.570 spid18s Database mirroring is active with database 'opaleGmao' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:39:30.040 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:39:30.060 spid17s Database mirroring is inactive for database 'opale'. This is an informational message only. No user action is required.
2014-12-10 15:39:32.280 spid17s Database mirroring is active with database 'opale' as the principal copy. This is an informational message only. No user action is required.
2014-12-10 15:40:03.970 Backup Log was backed up. Database: model, creation date(time): 2003/04/08(09:13:36), first LSN: 134:488:1, last LSN: 134:488:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'TDPSQL-00002190-0000'}).
This is an informational message only. No user action is required.
Thanks

Hi Ajay,
As your description, you come across the login timeout issue in database mirroring. This issue could occur due to the network errors, such as TCP link time-outs, packet errors. Besides the link (Mirroring time out) from SequelMate, I recommend you to check
if there is any packet loss or errors in your network connection.
Before detecting packet errors, you could enable a hidden setting in Windows to show you any possible errors with your connection and make a quick registry change as the following steps.
1. Press Win key+R to bring up the Run box and type regedit to launch the Windows registry editor.
2. Navigate to the following registry location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\Connections\StatMon
If the StatMon key is not there, right click on Connections, select New -> Key and enter the value as StatMon.
3. Inside the StatMon key, set the ShowLanErrors DWORD value as 1 if it’s already there. If ShowLanErrors is not there, right click on StatMon and select New -> DWORD value. Set the DWORD value name as ShowLanErrors. Double click on ShowLanErrors and
set the value data as 1.
4. Open Network and Sharing Center >> Click Change adapter settings >> Right click your network connection >> Select Status. You will now see an additional Errors information in your connection status below the Sent and Received Bytes.
For more information about the process, please refer to the article:
https://www.raymond.cc/blog/detect-packet-errors-in-your-network-lan-connection-status/.
If you find packet errors, you could fix the issue according the article:
http://www.ehow.com/how_8546105_fix-loss-packet-error.html
Regards,
Michelle Li

Payables Open Interface Import getting errors out

Hello All,
I am trying to run "Payables Open Interface Import" program to upload the invoice but the program is getting error out, in the log file at the end i am getting the below error:
(Insert ap inv dists 1a) Inside the insert function
(Insert ap inv dists 1) Insert into ap_invoice_distributions
(Insert ap inv dists 1) Insert into ap_invoice_distributions
ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated
Insert_ap_inv_dists<-Create_lines<-Import_invoices<- Before report trigger
(Create Lines 22) Insert into ap_invoice_distributions
create_non_item_lines<-Import_invoices<- Before report trigger
Any one faced this kind of issue?
any suggestions to resolve this.
Thanks & Regards
Aboothahir

Pl post details of OS, database and EBS versions.
Pl see these MOS Docs
Payables Open Interface Error ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated          (Doc ID 357784.1)
APXIIMPT Payables Open Interface Import Fails ORA-00001          (Doc ID 353052.1)
Unique Constraint Violated Importing Invoices With Multi Line Distribution Set          (Doc ID 386323.1)
HTH
Srini

Runtime constant (Filename) errors out in BPM

Hi,
I have a BPMCollectTime scenario to collect the Source files. The filename (Message Mapping/Transformation) from the files is captured in TRANSFORM STEP(before sending them out from BPM). The file is sent to SEND step one at a time.
Question : Filename of the source file is captured through user defined function.
Following is the code.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
The Mapping gives a runtime error in the BPM. This is a sporadic error.
I have selected the Adapter specific attribute(File name).
The BPM errors out sometimes? I am not sure if I am missing any setting. If I delete the work item and run the same scenario it works.
Question 1 : What is the cause of the above error?
Question 2 : Does BPM support Adapter specific attribute such as filename?
Kindly Advice.
Thanks,
Gowri

Hi Everyone,
Thanks for all the help.
DTN will not change the response filename to source filename. This option cannot be used. The correlation id is defined as response file name. Response filename is fixed for invoice file.
Here is the example.
For invoice file name HDTN20070430163110.TXT, response file received is nav1_2b5.rsp file. For HDTN20070430163314.TXT , response file is nav1_2b5.rsp
So my correlation id is dummy fixed value. I have known the fact that it is not possible to use context object filename.
Bhavesh - I have defined transform step for accessing filename using dynamic configuration. Following is the code used in mapping.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
====================================
BPM errors out sometime with following error
Component mapping has returned error.
com/sap/xi/tf/_MM_DTNData_2_DTNFilename_java.lang.NullpointerException.
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
If I delete this workitem and repeat the same scenario, it works. I have still not understood, why the scenario works sometime.
Kindly Advice.
Thanks,
Gowri

Comma delimited in Sql query decode function errors out

Hi All,
DB: 11.2.0.3.0
I am using the below query to generate the comma delimited output in a spool file but it errors out with the message below:
SQL> set lines 100 pages 50
SQL> col "USER_CONCURRENT_QUEUE_NAME" format a40;
SQL> set head off
SQL> spool /home/xyz/cmrequests.csv
SQL> SELECT
2 a.USER_CONCURRENT_QUEUE_NAME || ','
3 || a.MAX_PROCESSES || ','
4 || sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
5 ||sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'I',1,0),0)) Pending_Normal ||','
6 ||sum(decode(b.PHASE_CODE,'R',decode(b.STATUS_CODE,'R',1,0),0)) Running_Normal
7 from FND_CONCURRENT_QUEUES_VL a, FND_CONCURRENT_WORKER_REQUESTS b
where a.concurrent_queue_id = b.concurrent_queue_id AND b.Requested_Start_Date <= SYSDATE
8 9 GROUP BY a.USER_CONCURRENT_QUEUE_NAME,a.MAX_PROCESSES;
|| sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
ERROR at line 4:
ORA-00923: FROM keyword not found where expected
SQL> spool off;
SQL>
Expected output in the spool /home/xyz/cmrequests.csv
Standard Manager,10,0,1,0
Thanks for your time!
Regards,

Get to work immediately on marking your previous questions ANSWERED if they have been!
>
I am using the below query to generate the comma delimited output in a spool file but it errors out with the message below:
SQL> set lines 100 pages 50
SQL> col "USER_CONCURRENT_QUEUE_NAME" format a40;
SQL> set head off
SQL> spool /home/xyz/cmrequests.csv
SQL> SELECT
2 a.USER_CONCURRENT_QUEUE_NAME || ','
3 || a.MAX_PROCESSES || ','
4 || sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
5 ||sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'I',1,0),0)) Pending_Normal ||','
6 ||sum(decode(b.PHASE_CODE,'R',decode(b.STATUS_CODE,'R',1,0),0)) Running_Normal
7 from FND_CONCURRENT_QUEUES_VL a, FND_CONCURRENT_WORKER_REQUESTS b
where a.concurrent_queue_id = b.concurrent_queue_id AND b.Requested_Start_Date <= SYSDATE
8 9 GROUP BY a.USER_CONCURRENT_QUEUE_NAME,a.MAX_PROCESSES;
|| sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
>
Well if you want to spool query results to a file the first thing you need to do is write a query that actually works.
Why do you think a query like this is valid?
SELECT 'this, is, my, giant, string, of, columns, with, commas, in, between, each, word'
GROUP BY this, is, my, giant, stringYou only have one column in the result set but you are trying to group by three columns and none of them are even in the result set.
What's up with that?
You can only group by columns that are actually IN the result set.

Unable to Capture more than 5 mins, error out of mem msg when rendering

Somebody help me. I have been using my powermac fcp and a mini dv cam for 4yrs no problems. Now when i am trying to capture clips over 5 mins (1 gig) fcp freezes. So Im capturing through Imovie (which is working fine). Dragging clips into fcp to edit. Now when it comes to rendering anything over 5 mins Im getting an error out of memory msg.
Can anyone help me?

You don't say what version of FCP you are using but my guess is you've upgraded QT7 and are running FCP4.5
If that's the case, do a search here for the solution(s). They're ugly.
good luck,
x

In R12 standard Auto Invoice Import program is erroring out

Hi All,
The standard Auto Invoice Import concurrent porgram is erroring out when i run for the source as 'SUM_DIF', in the log messages its showing the following error:
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = sysdate,
LAST_UPDATED_BY = :b2,
LAST_UPDATE_LOGIN = :b3,
CUSTOMER_TRX_ID = NULL,
INTERFACE_LINE_ID = NVL(INTERFACE_LINE_ID,
RA_CUSTOMER_TRX_LINES_S.NEXTVAL),
SET_OF_BOOKS_ID = NVL(SET_OF_BOOKS_ID, :b4),
LINK_TO_LINE_ID =
SELECT INTERFACE_LINE_ID
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b5
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
WHERE NVL(INTERFACE_STATUS, '~') != 'P'
AND (REQUEST_ID IS NULL OR REQUEST_ID IN (:b6)
AND EXISTS
SELECT 'x'
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
len = 1289
Current system time is 18-SEP-2008 21:35:19
APP-AR-11526: ORA-01427: single-row subquery returns more than one row
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = !
APP-AR-11526: 5069629/ar/src/autoinv/raamil.lpc 1342
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = sysdate,
LAST_UPDATED_BY = :b2,
LAST_UPDATE_LOGIN = :b3,
CUSTOMER_TRX_ID = NULL,
INTERFACE_LINE_ID = NVL(INTERFACE_LINE_ID,
RA_CUSTOMER_TRX_LINES_S.NEXTVAL),
SET_OF_BOOKS_ID = NVL(SET_OF_BOOKS_ID, :b4),
LINK_TO_LINE_ID =
SELECT INTERFACE_LINE_ID
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b5
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
WHERE NVL(INTERFACE_STATUS, '~') != 'P'
AND (REQUEST_ID IS NULL OR REQUEST_ID IN (:b6)
AND EXISTS
SELECT 'x'
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
Error calling raamil()
Error calling raapft()
Thanks,
Ramakrishna.
Edited by: user605279 on Sep 18, 2008 11:59 PM

Ramakrishna
Looks like this is for the tax line (based on the fact that it is trying to update the link_to_line_id). The issue seems to be from the duplicate interface_line_attributes for the two different lines.This leads to this query returning more than one row for the tax line when it is trying to update.
For two different lines, make one of your interface_line_attributes (in this query I see 1, 13, 14, 15) unique.
Thanks
Nagamohan

Time Machine won't back up. Starts of REALLY SLOW, and the errors out.

I've been having a hard time getting time machine to back up. To start off I'll give you my specs and what I have done.
iMac
OS 10.6.6
2.4 GHz Intel Core 2 Duo
4 GB 667 DDR@ SDRAM
320 GB HD
All software updates are current. I am trying to back up to an external Western Digital 1 GB drive connected by USB2. I have formatted the external drive, and set a single partition on that drive from the Disc Utility. I have run disk repair on both the external and local hard drive. I have run disk repair permission on the local drive. I have restarted, after every time. I have done everything listed above multiple times, and have done them all in kinda different orders each time.
My thought is that the issue may not be with the hard drives, but maybe a file its trying to back up. When it starts out for the first time, it tells me that it needs to back up over 100 GB of data. It gets about halfway done, and then errors out. When I try to start it again, it tells me that it needs to backup around 50 GB of data. And this time, its REALLY slow. Like bytes slow, not Mega bytes, or even kilobytes. Bytes. 36 bites backed up, 120 bytes backed up. 2 Kilobytes backed up. SLOW SLOW SLOW.
Then it picks up, and usually gets up to 120 MB, and then gives me this error message "The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?

woody24 wrote:
"The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?
Tell Apple about the inadequacy of that message: http://www.apple.com/feedback/timemachine.html

XML Publisher report errors out when RDF report has no data

Hi everyone,
I created a template and attached it to an RDF. When i run the oracle report with the attached template, if the report has 'not data exists' the report is erroring out. is it the normal functionality of XML publiher??. Because i remember at my earlier client i have run some reports for which if 'no data exists' still the program would complete normal but the output would be blank.
The xml output is creating the tags for the elements.
any help appeciated.
Thanks
sam

Hi Sam,
Yes this will happen depending on what the template is repeating on etc. You can handle this quite easily using sub-templates.
Firstly create your normal template as a sub-template (so surrounded by the <?template:TEMPLATE_NAME?> tags)
Then create a second template that contains the text "NO DATA FOUND" as another sub-template.
Create a third template (this will be your main template called by the report), which imports the two sub-templates, then using a choose statement, count the number of occurences of you main repeating group in your XML. If the count = 0 then call the "NO_DATA_FOUND" sub-template, otherwise call the normal sub-template.
I hope this helps, if you need an example I can send you one, just let me know your email address.
Regards,
Cj

Supplier Site Contacts Open Interface Import Program is erroring out.

Hi,
We are on 12.0.4 on solaris 10.
Tomorrow is go-live in one of our client, When we doing data migration. Uploaded the data into Interface table. From there we are running this standard program to push th edata into standard table.
Its erroring out saying:
================
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: unable to extend temp segment by 128 in tablespace TEMP2
==> SELECT INT.org_id C_Rejected_Org_Id,
===============
I have added 2 GB of Tempfile to the tablespace even though it is erroring in the same. And it is taking too much time to give error.
We are tried with only one record also it is taking 1 hr to give the error.
Please help me out in resolving the same.
Many thanks in Advance..
Supplier Site Contacts Open Interface Import

I believe you hit Bug# 6624764, so you may need to apply (Patch 6624764 - SUPPLIER REPORT ERROS WITH ENTER PASSWORD: REP-0069: INTERNAL ERROR REP-57054).
Please log a SR to confirm this with Oracle Support.
Note: 565898.1 - Oracle Financials Software Updates, Release Update Pack 5
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=565898.1

Analytics login is erroring out

Similar Messages

Maybe you are looking for