Analyzer 6.5.1.2.01063 Gifs problem

i have a problem when i put an animated gif in a report, when i want to open the report, show me the following error" An unknown exception ocurred while communicating with the server.; nested exception is:java.lang.NullPointerException"how can i solve this problem?thanks

6.5.1 runs on JRE 1.3.1.04, 6.2.1 runs JRE 1.3.0.02. The application looks for the JRE in different folders. It will be a onetime download for the user. You can change the runtime on the 6.5.1 release (Hyperion won't support it but your user field would not have to "re-download".To change your classID do the following:Browse to the <drive:>\hyperion\analyzer\appserver\webapps\Analyzer6_server directory. Open Administrator.jsp in notepad (hold down the shift key and right click on the file. You should see a menu option call ?Open With??, select that and select Notepad from the drop down menu.~ Do a find on ?classid=? (ignoring the ??)~ Change the classid= from "clsid:<%= com.hyperion.analyzer.utils.general.HYAURLParamHandler.getJREClassID(request) %>" to match the classID in the Administrator.html (6.2.1)~ Next look for codebase="<%= com.hyperion.analyzer.utils.general.HYAURLParamHandler.getJRECodeBaseValue(request) %>"> (this should be 4 lines below the ?classid=? line.~ Change the codebase to match the code base listed in Administrator.html~ Save file changes~ Perform the above steps on the file Analyzer.jsp. This will allow you to control the JRE codebase. One word of caution... Hyperion tested and built on a particualr version of JRE for a reason. Unless it is a pain to change the JRE on clients (several hundred users), I would advise upgrading to the JRE 1.3.1.04

Similar Messages

Published GIF Problems! Please help

I've created a flash animation and published it as a GIF
animation that continuously loops. After previewing my GIF there
are black blocks wherever there is TEXT. Anyone know how to fix
this? I've never encountered this problem before so I have no idea
how to fix it...

OK I found a way around this problem... I delete all the text
that I had created within Flash and recreated it in Photoshop. I
rasterized the type in Photoshop the I saved the files as PSD. I
then went in to Flash and imported them to the library. I place the
images of the text where they had originally been in my Flash file.
When I published it as an animated GIF the file was perfect... No
Black or White blocks...
SO you might try that... I'm not sure what Flash changed, but
I used to create text for animiated gif before without any
problems...

Keynote 3: Transparent Animated GIF Problems

I've been trying to get an animated GIF with a transparent background to run in Keynote, but it's giving some disastrous results.
I produce the animation by rendering the frames as PNG (with alpha channel) in MegaPOV 1.2.1. Then I use the convert utility from ImageMagick 6.2.9 to make them into an animated GIF.
When I drop the animated GIF into Keynote 3.0.2, the first frame shows fine (with transparency and all). But when I animate it, the background goes red (the main color in this particular movie) and some trace of the previous frames stays. It seems like:
1. Rather than displaying the GIF frame-by-frame, each frame is getting layered onto the previous frames.
2. Keynote doesn't like the alpha channel for some reason.
Problem 1 is also present if I open the GIF in Preview (is that supposed to be the correct behavior of an animated GIF?). Problem 2 seems to be Keynote-specific.
Any suggestions for a work-around on this? The animated GIFs work fine if rendered without the alpha channel, but it'd look so much better with transparency!
iMac 2GHz Intel Core 2 Duo Mac OS X (10.4.9)

MegaPOV doesn't have a GIF output option. The choices are PNG, Targa, PPM, and hdr (not familiar with that last one). I don't know if PPM even has alpha-capability.
So in some way, I have to convert PNG to GIF. The tools I have to do this are ImageMagick and Gimp. I tried them both, then viewed the results using several programs. Results are tabulated below -- (1) means that problem 1 from above was apparent (ie, parts of the previous frames were visible under the current frame); (2) means that problem 2 was visible (ie, the transparent parts took on some background color).
If I didn't know how to change the default white background in the program, I couldn't tell whether problem (2) occurred, since the movie made with Gimp had a white background in Keynote.
Using ImageMagick 6.2.9 to convert PNG->GIF and animate GIF:
* viewing with Safari 2.0.4 : (1), can't tell for (2)
* viewing with Preview 3.0.9 : (1), can't tell for (2)
* viewing with Firefox 2.0.0.3 : (1)
* viewing with Keynote 3.0.2 : (1), (2) -- alpha goes red
Using Gimp 2.2.11 to convert PNG->GIF and animate GIF:
* viewing with Safari : (1), can't tell for (2)
* viewing with Preview : (1), can't tell for (2)
* viewing with Firefox : (1)
* viewing with Keynote : (1), (2) -- alpha goes white
I only converted the first few frames using Gimp, since I was doing it by hand.
All of this makes me wonder whether I'm dreaming the impossible, since problem (1) is universally present. It also makes me pretty sure that problem (2) is Keynote-specific.
If there are any other tools that will convert/animate GIFs on a modern Mac, I'd love to hear about them. My UNIX-y tools seem to be failing me here. The Mac tools I remember from "back in the day" -- GIFBuilder and GIFConverter -- seem to have been abandoned around the beginning of Mac OS X. GIFBuilder won't even load my files, and GIFConverter still lacks alpha support in PNG.

Animated Gif Problem

Greetings
I would appreciate some help.
I am new at creating animated gif's, and am experiencing a
problem with them when I try to view them in a browser.
I am working in Fireworks 2004, the following is what I do.
Create first frame.
Insert simple arrow.
Create second frame
Insert simple arrow with diffrent color
Third frame same but diffrent image.
Set the Optimize Panel to Animated Gif, transparency set to
No tranparency.
Click on File, Export.
Type the name of the file in File Name box.
Select "Frames to Files" option for Save as type option.
In my folder where I saved the files there are now three gif
files.
When I open the file into the following browsers IE 7, 6.0 or
Firefox it remains as a static image in the browser with no
animation, the same is for viewing it in Window Explorer Preview
Pane.
In Fireworks however the animation plays perfectly.
I would really appreciate it if someone could tell me what I
am doing wrong or why they created animated gifs are not playing in
the browser.
Regards
Dave

Instead of Frames to files on export, select Images only.
that should do it -
alex
revbear wrote:
> Greetings
>
> I would appreciate some help.
>
> I am new at creating animated gif's, and am experiencing
a problem with them
> when I try to view them in a browser.
>
> I am working in Fireworks 2004, the following is what I
do.
>
> Create first frame.
> Insert simple arrow.
> Create second frame
> Insert simple arrow with diffrent color
> Third frame same but diffrent image.
>
> Set the Optimize Panel to Animated Gif, transparency set
to No tranparency.
>
> Click on File, Export.
> Type the name of the file in File Name box.
> Select "Frames to Files" option for Save as type option.
>
> In my folder where I saved the files there are now three
gif files.
>
> When I open the file into the following browsers IE 7,
6.0 or Firefox it
> remains as a static image in the browser with no
animation, the same is for
> viewing it in Window Explorer Preview Pane.
>
> In Fireworks however the animation plays perfectly.
>
> I would really appreciate it if someone could tell me
what I am doing wrong or
> why they created animated gifs are not playing in the
browser.
>
> Regards
> Dave
>
>

Animated GIF problem saving for web in CS6

I made an animated gif in CS6 and trying to save it for the web. The duration of the animation is pretty long, about 44 seconds. After 17 seconds the animation stops while the saving was completed. How can I solve this problem? The file is too large to attach (725 x 225 px) unfortunately.
Please give me some advice;-)

Yopu probably exceed the GIF specs and generate too many frames.
How many frames are possible?

Animated GIF problems

I've recently implemented an extension of IconView to animate gifs correctly in editor panes. I am just haveing two problems with it that I can't figure out.
Firstly, when an animated gif is added it animates fine. The next time the same gif is added, it doesn't animate, just shows the last image of the animation. I assume that something is trying to be clever by caching the image somewhere, is there any way around this?
Secondly some of the gifs do not animate very well. I believe that they may be using transparency to leave the contents of previous frames behind, but I guess that java does not support this. Any thoughts on how I could solve this?
Here is the simple code for my view:
class AnimatedIconView extends IconView implements ImageObserver
     private Container container = null;
     private Rectangle bounds = null;
     public AnimatedIconView(Element e)
          super(e);
          Icon icon = StyleConstants.getIcon(getAttributes());
          if (icon instanceof ImageIcon)
               ((ImageIcon)icon).setImageObserver(this);
     public void setParent(View parent)
          super.setParent(parent);
          container=getContainer();
     public void paint(Graphics g, Shape s)
          super.paint(g,s);
          bounds=s.getBounds();
     public boolean imageUpdate(Image img,int infoflags,int x,int y,int width,int height)
          if (((infoflags & ImageObserver.FRAMEBITS)>0)&&(container!=null)&&(bounds!=null))
               container.repaint((int)bounds.getX(),(int)bounds.getY(),(int)bounds.getWidth(),(int)bounds.getHeight());
          return true;
}Dave

I just can point you the bug which is probably related to your problem:
http://developer.java.sun.com/developer/bugParade/bugs/4725530.html

Save for web - animated gif problem PSE (Mac)

Trying to save an animated gif using Save for Web dialogue box...
works fine, except checkbox "Loop" and delay rate drop down box are highlighted (active) but can't be changed
anyone know reason / fix?

No fix, alas. This has been a problem in the mac version since PSE 6. If your gif is small, you can duplicate layers so that they appear to stay onscreen longer, but the best advice is to not use PSE/mac for this, unfortunately.

Safari Animated Gif problem

Hi,
I'm having a little problem, I have a gif, that only has one play and doesn't loop, If I load the page there is no problem i does the animation, if i then refresh the page it doesn't play the animation only leaves it on the final frame, the same happens if i go to another page in the site that has the same animated gif on it.
I'm hoping its just a setting in the css or html that can tell it to load gif animation again but that the moment its just confusing me.
Any help would be greatly appreciated.

Hi, carta mundi-
CSS Filters are currently only supported by WebKit browsers, and Firefox is not a WebKit browser.
Hope that helps,
-Elaine

Animated GIF problem. Please HELP!

the problem is that, when i open some of my GIF type documents, they show up as bigger-as if blackberry automatically resizes them and i can only see a part of the image. if you know any possbile solution to this problem, please tell me! thank you!

The "Do Not Disconnect" screen will continue to stay displayed on your iPod, simply because you either have Disk Use enabled, or you are manually managing your iPod's songs.
If you are automatically syncing songs to your iPod, then disable disk use.
For more info, see this:
Enabling Disk Use for iPod
If you are manually managing your iPod's songs, then you will have to eject it from your computer before unplugging it to make it safe to disconnect.
For details on safely disconnecting an iPod, see this:
Safely Disconnect iPod
-Kylene

Imported GIF problem. 1 of 2 frames is incorrect.

Okay, I have imported a gif but it does not play correctly. It's only two frames. The first bmp associated with the gif in the library has both slides combined while the second bmp is correct.
To show the issue I am having. Here is the 2frame gif playing correctly: http://imgur.com/Bkpop.gif
(please ignore quality...it's just simple gif for a...yeah long story..anyway)
Now here is a screen shot of my library: http://imgur.com/wtlhr.jpg You can see how the highlights bmp is incorrect. When I play the gif in Firefox,IE, Ulead gif animator or anywhere else it is fine but in Flash it shows that first frame with the combined slides and then the 2nd slide correctly. It ruins the "dancing effect" I'm going for.
Does anyone know why it is importing this way? Or what steps I should take to correct it? It's a very simple gif and if I could just get it to display/play properly in Flash I could make a very large rugby player happy.
Cheers,

I just tried that but had the same problem. But I did find a resolution to this problem. If anyone is having this issue try adding one blank transparent frame at the end of the slideshow for .001 seconds. This eliminated the weird import and transition problems I was having.
Many thanks,
F

Swf to gif problems...URGENT, PLEASE HELP!

Hey guys!
Okay, I have this problme, and I cannot find a solution and a client is wanting this back now...
So, I got supplied a .swf file and html wrapper. With the request that he could get a gif to put on the site. So I figured, no problem! I tried:
pasting it to a stage in flash... It wouldn't recognise/open the file.
And using a few different types of "swf to gif" converters. They also didn't seem to recognise/open the file.
So I tried using a different .swf file I have. But all the same issues happened.
Can anyone suggest why this is happening, and if there is a solution?
I am currently running flash cc. I cannot tell you what version the .swf is made in I'm afraid
Thanks for you help!

Google around for a SWF to Video (MOV / AVI / etc) converter. Take the movie it creates into any video software you have and export an animated GIF sequence.
For example, Pemiere's Export options:

Draw On Panel/Save as GIF problem

Hi everyone,
I am designing an application where the user should be able to free draw on a JPanel(that resides on a JFrame) by licking/dragging/releasing the mouse.
Then, this drawing needs to be saved as a GIF image.
OK. I have managed to implement a free-draw algorithm but now I am having problems saving the GIF. I think I kinda know where the the problem is, but I can't find any ways around it.
I am using a Graphics2D class to draw the lines, and I am using the .setClip method to assossiate my graphics object to the JPanel,i.e.
g.setClip(jPanel1.getX(), jPanel1.getY(), jPanel1.getWidth(), jPanel1.getHeight());
I think that this is where the problem is. I believe that eventhough I can actually see the line drawn by the user @ runtime, the line itself is not "added" onto the JPanel, it just draws itself onto the area that the JPanel occupies.
Hence, when I attempt to save the JPanel as a GIF(using an Acme.JPM.Encoder), the saved image appears monochrome, without any lines on it at all.
The free-draw algorithm that i am using involes saving all the coordinates of the area where the mouse is being dragged into a Vector of Points which I have to repaint() whenever a new drag is listened.
Any help would be greatly appreciated,
thanks
Yiannis

Hi Ashwin,
I have created a class that can take a JPanel and save it into GIF.
the code is:
import javax.swing.*;
import java.io.*;
import java.awt.image.*;
import java.awt.Graphics;
import Acme.JPM.Encoders.*;
public class saveToGIF {
private JPanel panel;
/** Creates a new instance of saveToGIF */
public saveToGIF(JPanel panel, String file) throws IOException{
this.panel=panel;
BufferedImage image = new BufferedImage(this.panel.getWidth(), this.panel.getHeight, BufferedImage.TYPE_INT_RGB);
Graphics g = image.getGraphics();
panel.paint(g);
FileOutputStream fos = new FileOutputStream(file);
GifEncoder encoder = new GifEncoder(image, fos);
encoder.encode();
fos.close();
OK, this works fine. However, I cannot add my drawings onto the JPanel.
Sth with overwritting the paintComponent() method is what i do no fully nderstand.
Thanks,
Yiannis

Animated Gif - Problem with Frame Delay

Mac OS X 10.5.8
PSE 6.0
I just created an animated gif by following the steps in PSE Help. It says that I should be able to adjust the rate at which the images rotate by changing the Frame Delay measurement but I am unable to change it. In fact I am unable to change anything in the Animation section of the dialog box.
When I check Animation, the options appear to become active (they're no longer greyed out) but I can neither uncheck the Loop option nor change the Frame Delay option. All other sections of the dialog box work fine.
Your help would be most appreciated!
Beth

Unfortunately this is broken in PSE 6 and PSE 8. You can tab into the frame delay box if you start above it someplace on that side of the screen, and it appears to let you change the rate, but your choice doesn't really affect the actual frame rate. The only workaround is to duplicate frame layers that you want to stay onscreen longer (so it will be changing just as fast, but not visibly).

Animated GIF. problems in Captivate

I have been trying to bring in an Animated GIF. into my
Captivate presentation.
When I import the animation using Insert> Animation it
converts the animated gif to a swf file.
In the preview screen it shows my animated gif with multiple
colors flashing over and over. It is doing this to all of the
animated gifs that I am bringing in. My fps is set to 10 within
Captivate.
Is there frame restrictions or file size restrictions that is
causing this error when bringing in an animated gif. Any
suggestions?

Hi mikeygilbert23_nap and welcome to our community
Unfortunately, there are a few different methods used to
create animated .GIFs. One would think all of them would be created
simply using different images. Largely this is true. But some
animation programs allow you to choose different methods for the
way the screen is painted between frames. Sounds like you may be
seeing this behavior.
Not sure what to advise as to how to work past it though.
Sorry. Hopefully one of the others has a clue.
Cheers... Rick

Fireworks MX animated gif problem

I am creating a rotating banner with fireworks and I have
changed all the frame rates from default ( 7 ) to ( 100 ).
Everytime I go to optimize and change to animated gif. the frame
rates change back to ( 7 ). Somebody please help.

quote:
Originally posted by:
r_cronier
I am creating a rotating banner with fireworks and I have
changed all the frame rates from default ( 7 ) to ( 100 ).
Everytime I go to optimize and change to animated gif. the frame
rates change back to ( 7 ). Somebody please help.
What happened is that you picked a factory preset from the
Saved Settings dropdown menu. If you don't want to use presets,
just ignore that top-most dropdown menu. Use the rest of the
options to set your values: as long as you specify Animated GIF in
the upper left dropdown menu and pick a palette, the Optimize
function still works as intended.
Btw, If you need to use your values regularly, it's a good
idea to save them as a custom preset so that will show up in the
Saved Settings menu, along with the factory presets.
Hope that helps. :-)
SiamJai
~~~~
http://design.thaiwonders.com
- Innovative Fireworks & Game Art Community

Analyzer 6.5.1.2.01063 Gifs problem

Similar Messages

Maybe you are looking for