Analyzer- query in prod system not same as in development

Hi
Pls help!! Sitting under this issue 2 days In Query designer both queries (from prod and dev) look same but after running in Analyzer there are few cells which are with slightly different value (I m running query on closed period so I guess everything should be same) I rewrote formulas and few are already ok but still I am struggling with discrepancies in 2 cells. Any idea what can it be??

The most common cause of these issues is that there is some data in your development system's infoprovider that is different from the data in your Production system. I would suggest you extract a quick set of data from each system using RSA1 's "Display Data" feature on the infoprovder, and compare the two. If they are indeed the same, then you have some other difference in the systems.
Other design elements that may affect your query results that might not be obvious would include structures, calculated key figures, and query elements of that sort.
Good luck.. these are very frustrating issues. It sometimes helps to find a co-worker to look at your designs. We all have development blind spots, and having a new pair of eyes to look at the designs may see something you have not noticed.

Similar Messages

Can CHARM be activated if QA and Prod systems not defined yet?

Hi All.
We are starting to upgrade our system from CRM 4 to CRM 7.
Is it possible to setup/activate CHARM to manage transports for the CRM 7
system eventhough we only have a development system at the moment.
Our Basis Team will start defining the QA system next week and later the prod system.
I remember that when CHARM was activated on the CRM 4 system, the SolMan consultant mentioned that the environment (dev, QA and prod) should be all defined before activating CHARM. Is this true? Can we just define a dummy client?
Thanks,
Tess

Hi Tess,
yes, it is possible.
Via transaction SMSY you can describe the planned Q- and P-System at first as 'virtual'.
Create transport routes with transport buffers as you would do for existing systems.
For experimental purposes we connected our IDES-System to our development SolMan system.
In this environment we could map such a ChaRM-configuration.
In the meantime we practiced it in our production SolMan system, too.
Best regards
Horst

What issues we may face in installing a new Prod portal with same SID as existing one

Hello All -
We found some vbs script files in the host of EP Prod system. On confirmation from SAP we deleted those files without any harm to our prod EP system. But customer is still concerned about the security of the system and wanted us build the new EP prod system with same SID.
We approached SAP and they suggested to install a new EP system and do customization rather than performing system copy from existing prod EP system because that may still bring those security threat changes to new EP prod system. (we ll decommission the old EP if everything works fine in new EP)
Now I would like to list all the issues we may face in building a new EP system with same SID as that of already existing one and then doing entire customization again in new EP from Basis team point of view. The following are very few i could think of. Could you please add some other concerns you could think of.
1) Keeping in mind that this EP system is in use for more than 6 years, some of the customization could have been done on lower versions. So could those changes be again exported from Dev and imported into new version of EP we are building now ?
2) Can't add two hosts with same name in DNS Server
3) Can't add two systems with same SID in Solution Manager for calculation of SPS to upgrade new EP

You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
Then make sure to restart the gateway and server.
HTH ..

How to transport a query created in system development to quality and prod?

Hi All,
I'd like to know ow to transport a query created in system development to quality and prod?
Thanks

Hi,
Queries are not saved under any transport request.
We would have to go to transaction sq02 and click on the 'Transport' button ( with truck icon).
In the screen specify your query name, infoset name, and usergroup name and select the option 'Download'.
Save the downloaded file on your desktop.
In your quality or production system, go to SQ02 and click on teh same button,
select 'Upload' and specify the name of the query, infoset and usergroup which you want to upload.
Select the downloaded file.
Select the option 'Overwritting allowed' as applicable.
Thanks,
Harini

SWF file is not working in Portal PROD System

Hi All,
We have written custom mxml script in Adobe Flex 3 which displays the list of applications stored in the DB. Then we have posted that .swf file into our Portal KM and then we have created one URL iView with the location from KM.
These days we are facing issue like the output of the script is not working means the applications are not listed on the portal prod system.
Whenever the issue arieses we are requested to upload the file once again into KM and it works after the upload been done.
We are not sure what could be the reason for this issue and I request any one to assist us to resolve this issue.
Please let me know if you need more info on this issue.
Thanks in advance.
Best Regards,
Vijaykumar K.

Hi Vijay,
I belive this should be a portal issue, anyways let me give it a try.
I never worked on flex in SAP but did similar stuff in portal content development.
Do you have any traces in that development..?
Did you check any messages being loged in portal...?
Check if there is any issue with the file like couldn't recognise a resource from KM which is required etc.
Cheers,
Sai

Transporting a query created in system development to quality and prod ...

Hi All,
I'd like to know how to transport a query created in system development to quality and prod?
Thanks

From the menu on top in SQVI or SQ01 transactions, choose Query -> More functions -> Generate program. Then choose Query -> More functions -> Display report name. This report is an ABAP report (just like any other ABAP program). Please check with an ABAPer if this report can be pushed into a Workbench Transport request, so you could then move it to QA and Prod.

SID Problem : could not register two ABAP systems with same SID

Dear Expert:
We have to register two ABAP systems on different host to SLD, and these two systems have same SID.
We use rz70 to do this, but we found the lastest registration will overwrite the previous registration,
that
means we could register them both in the same SLD. (we checked this in Technical system area).
How could we do this? It makes us crazy........
Thanks very much
Ray

Dear Stefan,
Thanks so much for your anwser.
But the dilemma is in one SLD we achieved this, but it is only for one case and we could
not apply this for other systems.
This is the snapshot in our SLD for techical system:
Name                                        Host                             Version                                     Last Update
D01   on eisdq01                     eisdq01                         700                                           2010/12/06 12:45
D01   on eisdv01                     eisdv01                         640                                           2010/12/06 11:40
We don't know if this is the illusion that SLD could do this? But for other systems, e.g two Q systems
the lastest registration will overwrite the previsou one.
Thanks very much.
Welcome suggestions from very guru.
Ray

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with inst

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?

yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(

How to recall back my system preferences password cause i forgot it, the password is not same with apple id?, how to recall back my system preferences password cause i forgot it, the password is not same with apple id?

how to recall back my system preferences password cause i forgot it, the password is not same with apple id?, how to recall back my system preferences password cause i forgot it, the password is not same with apple id?

I'm assuming you mean the admin password.
https://discussions.apple.com/docs/DOC-4101

ı have installed an application about lock system but the application isnt about lock systm this is an code reader. when ı see the application's pictures this is an lock application but content not same. I have got laid...what shoul I do?

I have installed an application about lock system but the application isnt about lock system this is an code reader. When ı see the application's pictures this is an lock application but content not same. I have got laid...what should I do?

semihtinas wrote:
Please make something these fraudsters
You're not addressing Apple here. This is a user to user technical support forum. You can submit feedback to Apple here:
http://www.apple.com/feedback
Other contact information can be found using the Contact Us link at the bottom right of every page.

WebI:Creating a minus query from data providers not using the same universe

Hi there. A client of ours wishes to use Combined Query on multiple universes in the same WebI report. So far, I have heard it is not feasible in WebI. I know it is possible in DeskI. Even the sub-query option is limited to just one universe in WebI. So, I am stuck.
Is there a workaround to creating a minus query from data providers not using the same universe in WebI?

Hello Amit,
what are the Datasources ? Usually when you create a Sub Query you can choose a seperate Universe.
Maybe if you only see one Universe you only have the rights for this Universe ?!.
Regards
-Seb.

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?
I'm planning to purchase the 6 plus, but I need to know from where.whom will the fix for this problem emerge.

My new iPhone 6 paired perfectly with my Mercedes system. That said, on your iPhone 5, reset your network settings and then try to pair it again.

DMV quesiton. Can not run the DMV query in non system database.

As the title .I can run following query when I use 'use master' , But don't work at the DB which be created my myself.
--Error massage
Msg 208, Level 16, State 1, Line 1
Invalid object name 'SYS.DM_EXEC_QUERY_STATS'.
--SQL Version : 2005
--compatibility level : 90
--The query
SELECT TOP 10
QT.TEXT AS STATEMENT_TEXT,
QP.QUERY_PLAN,
QS.TOTAL_WORKER_TIME AS CPU_TIME
FROM SYS.DM_EXEC_QUERY_STATS QS
CROSS APPLY SYS.DM_EXEC_SQL_TEXT (QS.SQL_HANDLE) AS QT
CROSS APPLY SYS.DM_EXEC_QUERY_PLAN (QS.PLAN_HANDLE) AS QP
ORDER BY TOTAL_WORKER_TIME DESC

Yes, you can run the query under none system database.... Make sure that your db is set 90.....
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to remove Variable-Values prior to transporting to prod-system?

Hi specialists,
I've got the following problem:
We've got a mixed BEx-client-environment with user using BEx 3.5 as well as BEx 7.x.
So I create workbooks with BEx-Analyzer 3.5 and transport them from the developement-system to the production-system.
The problem: Obviously the variable-selection that I used at last in the developement-system is saved in the workbook. So let's say I tested the query in the dev-system with "DE01" as value for the company_code on the variable screen, then this value is saved in the workbook and transported to the prod-system.
In the production-system the value is not replaced anymore by the users permitted company-code values (the variable is based on the users permissions), but the user has to remove this "DE01" manually and has to enter all his personal company-codes manually - which makes the permission-bases-variable senseless.
Even if I clear all variable-values in the developement system (which is not possible for mandatory variables) prior to saving the workbook, the issue is the same: This time empty fields are presented in the prod-system, but the permission-based-variable isn't set correctly - the field stays empty (=exactly as it was when I saved the workbook in the dev-system).
So, how can I clear the variable-screen-values before I save and transport the workbook to the prod-system? The only way (and it is certainly not the recommended one) i found: If I cancel the query at once after having confirmed the variable-screen and save/transport that query, then the variables seem to be really empty and the permission-based variables in the prod-system work.

So, when user run the report in production, they will have to remove # for mandatory variables and put thier value.
Mh - most of our reports have variables for "company_code","sales_org" (for example).
Normaly this fields are not mandatory but optional.
But: Normaly if the user opens such a variable-screen (for the first time) the company_code and sales_org are preset according to the users permissions for this chars.
If I follow your description, then the variable-screen would open with "#" or "" - but wouldn't be replaced by the user's permitted values anymore :/ - hence the phone rings because the users didn't manage to restrict the variables to their permitted values.
Maybe this is a case for an oss-message for the area BW-BEX-ET-USAB Userability Frontend....

Transport of Query successful, but changes not appeared in the report

Hi All,
I have 2 Queries(Normal and Total stock reports on the same InfoProvider) in Prd.
For that User asked me to add one characteristic to Free characteristics.
I added one characteristic in Free Characteristics to both Queries in Dev and i collected the Transport requests for both the queries in RSA1->TRANSPORT CONNECTIONS and gave it to basis guy, he transported successfully to PRD and for both the reports the changes reflected in the
query designer, while executed the Normal stock report the characteristic added in free characteristics appeared and while drill down the data is coming, but for the Total stock report the changes appeared in Query designer but on executing the report even the characteristic added to Freecharacteristics is not appearing in Navigation Pane.
Also with the same technical name of total stock report there are 2 reports appearing in query designer. what to do now.
Help me here asap..
Thanks,
Chaitu.
Edited by: chaithu218 on Jun 21, 2011 10:37 AM
Edited by: chaithu218 on Jun 21, 2011 10:40 AM

Hi Chaithu,
As you mentioned that you can see 2 versions by the same technical name in designer for total stock report, it is highly probable that the query you are changing and the query you are executing are different.
2 versions of a query can exist with the same technical name as the system identifies the queries by their UIDs, which would be different for both these versions of queries.Following are the things you need to check:
1) In development system too, do you have 2 versions?
2) In production system, check the UID for both verions of the query
3) In Dev system, make sure you modify the query with UID which is being executed, if it is available there. Else, you need to replace the query in prod with the one you have in Dev system.
2 versions by same technical name can exist if:
1) Someone created a query directly in Prod, and transported a query by same technical name from Dev system
2) or due to system refresh, copy, etc.
Hope it helps.
Thanks,
Abhishek.

Analyzer- query in prod system not same as in development

Similar Messages

Maybe you are looking for