Analyzer (report to excel export)

Hi Gurus,
we are using Hyperion Analyser (still in 7 version).
the question here is.
In analyzer we have a report containing many pages.
user wants to export all pages in to excel work book(each page in different excel sheet).
I did little reaserch and found tha smartview in 7 version can only be connected to planning and HFM.
is there any batch process for this to automate?
any suggestions, ideas...
is this doable ??
writing VBA in excel directly is only the option?
Thanks,
Jeeth
Edited by: Jithendra on Aug 19, 2010 11:10 AM
Edited by: Jithendra on Aug 19, 2010 12:42 PM
Edited by: Jithendra on Aug 19, 2010 12:55 PM

Check under Shared Components > Globalization and see if "Automatic CSV Encoding" is set to "Yes".
Pozdrav iz Njemacke.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Similar Messages

  • Crystal Reports 2008 Excel Export Compatibility Patch - second attempt :)

    Hello, I actually have a question related to the following thread, so I posted there and was recommended to start a new thread:
    Crystal Reports 2008 Excel Export Compatibility Patch?
    Question is related to the following doc, specifically, is this patch still available for CR 2008 or not?:
    http://help.sap.com/businessobject/product_guides/cr2008V1/en/xi3_cr2008eecp_readme_en.pdf
    A response from Don suggested this wasnt available for CR 2008 although this is confusing since the doc refers to CR 2008. My response was as follows and is essentially the question I still have (more so because we have another PeopleSoft/Oracle customer whos come across this doc and wants to know how to apply the fix for CR 2008). Thanks very much in advance!
    Hi Don, I know this is an old thread, but Im also running into the same issue and am confused by your statement since the referenced PDF doc says this patch is available for CR 2008. Did you mean that the patch is no longer available or supported for CR 2008 for some reason? If so, any idea why?
    Im a developer for Oracle/PeopleSoft and our PeopleSoft suite includes OEM Crystal. We recently upgraded to CR 2008 for our latest release and we are getting the same complaint from a few customers about not being able to output the XLS in Excel 8.0 compatiibility mode like before (In Crystal 9, we used the \Export\Excel\CompatVersion=80 registry key to enable this). So if this patch is available, it would be a huge benefit for us to be able to point our customers to it. If not, please still let me know eitherway.
    Thanks very much!
    Andrew

    Hi Andrew,
    So the story is the Rubik's patch has been available from CR 9 up until CR XI R1 as a simple download. In R2 and above to get it you have to log a case, work with a Report Rep to try to design your reports so they use the new export dll. To get you by until you have time to do so, and after filling out a query for the PM to get info on how to possibly improve the updated export dll to meet your needs, he will then send you the patch on the agreement that this is the LAST time you ask for it.
    Support no longer has access to the patch so all requests must go through the Program Manager who keeps tract of who received it.
    Bottom line is you need to update the reports to use the new export model.
    That old legacy dll was bugging and impossible to maintain.
    You can [purchase a support case here|http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=54722300].
    This is not a bug and has been this way for 10 years now, time to update your export model and Excel Macro's....
    Thank you for your understanding
    Don

  • Is any different between ECC 5.0 and ECC 6.0 for Excel export?

    Dear all,
    As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
    In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.

    In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
    I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
    Thanks again.

  • Issue while exporting report in Excel Format

    Hello,
    I am facing problem while exporting the report in Excel Format. After analysis, I think that it could be due to two reasons, either we are using wrong versions of Jars, or we are using wrong API. Here is the code, approaches and problems we are facing. Please help.
    First approach we are using is:
    // using basic API
    import com.crystaldecisions.reports.sdk.ReportClientDocument;
    // get client document from crystal report API and open the report by specifying the report name, with path
                   ReportClientDocument reportClientDoc = new ReportClientDocument();
                   reportClientDoc.open( reportPath, 0 );
                   // give chance to extending classes to configure the report document by POJO or by sql parameter etc, just adding the parameters infromation using ParameterFieldController
                   configureReportDocument( reportClientDoc, reportMetadata, reportData, reportContext );
                   // get data source of crystal report
                   Object reportSource = reportClientDoc.getReportSource();
                   // export the data - we have also tried with MSExcel format
                   ReportExportFormat exportFormat =  ReportExportFormat.recordToMSExcel;
                   LOGGER.debug( "exportFormat[" + exportFormat + "]" );
                   ByteArrayInputStream byteArray = (ByteArrayInputStream) reportClientDoc.getPrintOutputController().export(
                             exportFormat );
    Problem Faced: Specified Excel format is not supported.
    Second Approach: We come to know that excel format is supported with new releases and with occa package.
    Then we tried with import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument; It ask to set the ReportServer. When we are trying to set the server as
                   reportClientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
    Application is unable to find 'ReportClientDocument.inprocConnectionString' property. It seems like we are using some old jars. However we have downloaded the latest released jars for eclipse 2.
    Please help for it. Issue is to export the report in excel format, which is currently working fine for PDF. If this problem is related to Jars, please suggest the path to download the latest jars. We also looking for the latest jars like rasapp and rascore etc. But these are not available with Crystal Report for Eclipse 2 release.
    Waiting for urgent help. Thanks you..
    Regards,
    Mohit

    Hi,
    Send me Environment Details .
    Here is the code  snippet for exporting report to excel format:
    <%@ page import="com.crystaldecisions.sdk.occa.report.application.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.definition.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.data.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
    <%@ page import="com.crystaldecisions.sdk.framework.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.managedreports.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.*" %>
    <%@ page import="java.util.*" %>
    <%@ page import="java.io.*" %>
    <%
    String username ="Administrator";
    String password ="";
    String cmsname ="localhost:6400";
    String Authen ="secEnterprise";
         //connecting to Enterprise
         IEnterpriseSession es = CrystalEnterprise.getSessionMgr().logon(username,password,cmsname,Authen);
         //get the report App Factory form the Crystal Enterprise
         IReportAppFactory appFactory = (IReportAppFactory) es.getService("","RASReportService");
         //get the infostore service form the Crystal Enterprise
         IInfoStore istore = (IInfoStore) es.getService("","InfoStore");
         //get the report by name from crystal Enterprise
         IInfoObjects iobjects = istore.query("Select * From CI_INFOOBJECTS Where SI_NAME = 'sampleramz2.rpt' and SI_INSTANCE = 0 ");
         //open the report in the report doc object.
         ReportClientDocument Doc = appFactory.openDocument((IInfoObject)iobjects.get(0), 0, Locale.ENGLISH);
         // WORKING WITH THE PRINT OUTPUT CONTROLLER
         //Use the report documents PrintOutputController to export the report to a ByteArrayInputStream
         ByteArrayInputStream byteIS = (ByteArrayInputStream)Doc.getPrintOutputController().export(ReportExportFormat.recordToMSExcel);
         // EXPORTING THE REPORT
         //Create a byte[] (same size as the exported ByteArrayInputStream)
         byte[] buf = new byte[2000 * 1024];
         int nRead = 0;
         //Set response headers to indicate pdf MIME type and inline file
         response.reset();
         response.setHeader("Content-disposition", "inline;filename=ramz");
         response.setContentType("application/xls");
         //Send the Byte Array to the Client
         while ((nRead = byteIS.read(buf)) != -1)
              response.getOutputStream().write(buf, 0, nRead);
         //Flush the output stream
         response.getOutputStream().flush();
         //Close the output stream
         response.getOutputStream().close();
    %>
    Let me know any information is needed,
    Regards,
    Rameez

  • In SSMS after creating the query Report, how to export excel the same report from SSMS

    for Beginners in SSMS after the report is created , how to export the same report to excel, I did try the option to task and export and follow the procedure, this procedure does not export the same report, the one was created, unless I am missing some steps,
    is there a way to do just like we do in SSRS go to solution explorer, and properties and add the Target Server URL or not
    in SSMS, 
    after I save the report it saves in project , can some one please guide me how to do it, and what steps I am doing wrong,
    any help will be great.  I am not technical person, just starting to learn from internet.
    thanks in advance.

    As you have said you are not a technical person try using Import Export wizard.
    Refer this link
    http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
    And another simplest one is to copy the result set from the query window. Right click the result and select "Copy with Headers".
    Regards, RSingh

  • Excel export of crosstab report in Discoverer desktop 9i not proper

    Dear All,
    I have made a crosstab report where I am taking the totals of the fig at all the datapoints. For this total, I have put the "Label" as &Value. When I run the report, it shows the correct output and correct values for the label field. But when I am exporting the report in excel, the label does not refresh for all the items properly. Instead it shows the Label for the very first set of data across all the itesm.
    Can somebody pls tell me the reason behind this?
    Regards
    Minakshi

    I am experiencing the same issue. has anyone got a solution to this issue? i dont really want to truncate the string if possible

  • Fatal Error when exporting Report to Excel

    Hi Everyone, I've been trying to export my report to excel.  But I have exhausted all possible reasons and I just couldn't figure it out.  Can someone please help me.  Thanks in advance.
    PROGRAM NAME :   ZADC_PAYSUMNEW
    REPORT ZADC_PAYSUMNEW
    NO STANDARD PAGE HEADING
                      LINE-SIZE 450
                      LINE-COUNT 65 MESSAGE-ID zmes.
    TABLE DECLARATION                                                   *
    TABLES: cskt,
            csks,
            pa0009,
            pcl1,
            pcl2,
            pernr,
            t512t,
            t549a,
            t527x,
            zhrprtype.
       INFOTYPES DECLARATION
    INFOTYPES: 0001, 0002.
       INCLUDE DECLARATION
    INCLUDE: rpc2rx00.
    INCLUDE: rpc2rxx0.
    INCLUDE: rpppxd00.
       INTERNAL TABLE DECLARATION
    DATA: BEGIN OF itab OCCURS 0,
            khinr LIKE csks-khinr,
            kostl LIKE p0001-kostl,
            ltext(40),
            p_date LIKE pc261-inper,
            basic(7) TYPE p DECIMALS 2,
            pera(7) TYPE p DECIMALS 2,
            longp(7) TYPE p DECIMALS 2,
            trall(6) type p decimals 2,
            srvaw(6) TYPE p DECIMALS 2,
            chall(7) TYPE p DECIMALS 2,
            leave(7) TYPE p DECIMALS 2,
            meal(7) TYPE p DECIMALS 2,
            saldf(7) TYPE p DECIMALS 2,
            sipps(7) TYPE p DECIMALS 2,
            sipgs(7) TYPE p DECIMALS 2,
            subs(7) TYPE p DECIMALS 2,
            hzard(7) TYPE p DECIMALS 2,
            lallw(7) TYPE p DECIMALS 2,
            medps(7) TYPE p DECIMALS 2,
            medgs(7) TYPE p DECIMALS 2,
            pcontps(7) TYPE p DECIMALS 2,
            pcontgs(7) TYPE p DECIMALS 2,
            pagibps(6) TYPE p DECIMALS 2,
            pagibgs(6) TYPE p DECIMALS 2,
            lwop(7) TYPE p DECIMALS 2,
            npay(7) TYPE p DECIMALS 2,
            otime(7) TYPE p DECIMALS 2,
            ec(7) TYPE p DECIMALS 2,
            fr_date like sy-datum,
            to_date like sy-datum,
          END OF itab.
    DATA: BEGIN OF jtab OCCURS 0,
            khinr LIKE csks-khinr,
            kostl LIKE p0001-kostl,
            ltext(40),
            basic(7) TYPE p DECIMALS 2,
            pera(7) TYPE p DECIMALS 2,
            longp(7) TYPE p DECIMALS 2,
            trall(6) type p decimals 2,
            srvaw(6) TYPE p DECIMALS 2,
            chall(7) TYPE p DECIMALS 2,
            leave(7) TYPE p DECIMALS 2,
            meal(7) TYPE p DECIMALS 2,
            saldf(7) TYPE p DECIMALS 2,
            sipps(7) TYPE p DECIMALS 2,
            sipgs(7) TYPE p DECIMALS 2,
            subs(7) TYPE p DECIMALS 2,
            hzard(7) TYPE p DECIMALS 2,
            lallw(7) TYPE p DECIMALS 2,
            medps(7) TYPE p DECIMALS 2,
            medgs(7) TYPE p DECIMALS 2,
            pcontps(7) TYPE p DECIMALS 2,
            pcontgs(7) TYPE p DECIMALS 2,
            pagibps(6) TYPE p DECIMALS 2,
            pagibgs(6) TYPE p DECIMALS 2,
            lwop(7) TYPE p DECIMALS 2,
            npay(7) TYPE p DECIMALS 2,
            otime(7) TYPE p DECIMALS 2,
            ec(7) TYPE p DECIMALS 2,
          END OF jtab.
    DATA: it_list TYPE STANDARD TABLE OF itab   WITH HEADER LINE.
       CONSTANTS DECLARATION
    CONSTANTS: basic  TYPE pc207-lgart VALUE '0401',
               basic2 TYPE pc207-lgart VALUE '0402',
               basic3 TYPE pc207-lgart VALUE '0403',
               PERA   TYPE pc207-lgart VALUE '3104',
               PERA2 TYPE pc207-lgart VALUE '3110',
               longp  TYPE pc207-lgart VALUE '1601',
               longp2 TYPE pc207-lgart VALUE '1603',
               trall  TYPE pc207-lgart VALUE '3109',
               srvaw TYPE pc207-lgart VALUE '2117',
               leave TYPE pc207-lgart VALUE '2118',
               chall  TYPE pc207-lgart VALUE '3105',
               chall2 TYPE pc207-lgart VALUE '3111',
               chall3 TYPE pc207-lgart VALUE '3112',
               meal   TYPE pc207-lgart VALUE '3102',
               saldf  TYPE pc207-lgart VALUE '4103',
               sipps  TYPE pc207-lgart VALUE '/090',
               sipps2 TYPE pc207-lgart VALUE '1121',
               subs   TYPE pc207-lgart VALUE '3101',
               hzard  TYPE pc207-lgart VALUE '1602',
               lallw  TYPE pc207-lgart VALUE '3103',
               medps  TYPE pc207-lgart VALUE '/313',
               medgs  TYPE pc207-lgart VALUE '/314',
               pcontps  TYPE pc207-lgart VALUE '/093',
               pcontps2 TYPE pc207-lgart VALUE '1327',
               pcontps3 TYPE pc207-lgart VALUE '1120',
               pagibps  TYPE pc207-lgart VALUE '/326',
               pagibps2 TYPE pc207-lgart VALUE '1326',
               lwop   TYPE pc207-lgart VALUE '1102',
               otime  TYPE pc207-lgart VALUE '0101',
               otime2 TYPE pc207-lgart VALUE '0102',
               otime3 TYPE pc207-lgart VALUE '0103',
               otime4 TYPE pc207-lgart VALUE '0104',
               npay   TYPE pc207-lgart VALUE '/559'.
       DATA DECLARATION
    DATA: BEGIN OF COMMON PART buffer.
    INCLUDE: rpppxd10.
    DATA: END OF COMMON PART buffer.
    *Table data containing directory to PCL2 payroll results file DATA:
    DATA: BEGIN OF rgdir OCCURS 100.
            INCLUDE STRUCTURE pc261.
    DATA: END OF rgdir.
    DATA: BEGIN OF evpdir OCCURS 100.
            INCLUDE STRUCTURE pc261.
    DATA: END OF evpdir.
    DATA: country LIKE t001p-molga,
          lname LIKE t527x-orgtx,
          filename2(128),
          p_date LIKE pc261-inper,
          w_basic  LIKE pc207-lgart,
          w_basic2 LIKE pc207-lgart,
          w_basic3 LIKE pc207-lgart,
          w_pera LIKE pc207-lgart,
          w_pera2 LIKE pc207-lgart,
          w_longp LIKE pc207-lgart,
          w_longp2 LIKE pc207-lgart,
          w_trall LIKE pc207-lgart,
          w_srvaw LIKE pc207-lgart,
          w_leave LIKE pc207-lgart,
          w_chall LIKE pc207-lgart,
          w_chall2 LIKE pc207-lgart,
          w_chall3 LIKE pc207-lgart,
          w_meal LIKE pc207-lgart,
          w_saldf LIKE pc207-lgart,
          w_sipps LIKE pc207-lgart,
          w_sipps2 LIKE pc207-lgart,
          w_subs LIKE pc207-lgart,
          w_hzard LIKE pc207-lgart,
          w_lallw LIKE pc207-lgart,
          w_medps LIKE pc207-lgart,
          w_medgs LIKE pc207-lgart,
          w_pcontps LIKE pc207-lgart,
          w_pcontps2 LIKE pc207-lgart,
          w_pcontps3 LIKE pc207-lgart,
          w_pagibps LIKE pc207-lgart,
          w_pagibps2 LIKE pc207-lgart,
          w_lwop LIKE pc207-lgart,
          w_otime LIKE pc207-lgart,
          w_otime2 LIKE pc207-lgart,
          w_otime3 LIKE pc207-lgart,
          w_otime4 LIKE pc207-lgart,
          w_npay LIKE pc207-lgart,
          tempgs(7) TYPE p DECIMALS 2,
          ctr-basic(7) TYPE p DECIMALS 2,
          ctr-pera(7) TYPE p DECIMALS 2,
          ctr-longp(7) TYPE p DECIMALS 2,
          ctr-trall(6) TYPE p DECIMALS 2,
          ctr-srvaw(6) TYPE p DECIMALS 2,
          ctr-leave(7) TYPE p DECIMALS 2,
          ctr-chall(7) TYPE p DECIMALS 2,
          ctr-meal(7) TYPE p DECIMALS 2,
          ctr-saldf(7) TYPE p DECIMALS 2,
          ctr-sipps(7) TYPE p DECIMALS 2,
          ctr-sipgs(7) TYPE p DECIMALS 2,
          ctr-subs(7) TYPE p DECIMALS 2,
          ctr-hzard(7) TYPE p DECIMALS 2,
          ctr-lallw(7) TYPE p DECIMALS 2,
          ctr-medps(7) TYPE p DECIMALS 2,
          ctr-medgs(7) TYPE p DECIMALS 2,
          ctr-pcontps(7) TYPE p DECIMALS 2,
          ctr-pcontgs(7) TYPE p DECIMALS 2,
          ctr-pagibps(6) TYPE p DECIMALS 2,
          ctr-pagibgs(6) TYPE p DECIMALS 2,
          ctr-lwop(7) TYPE p DECIMALS 2,
          ctr-otime(7) TYPE p DECIMALS 2,
          ctr-npay(7) TYPE p DECIMALS 2,
          ctr-ec(7) TYPE p DECIMALS 2.
    DATA: BEGIN OF  ph-version.
            INCLUDE STRUCTURE pc201_pay.   "XTWPH9K008656
    DATA: END OF  ph-version.
    DATA: fr_date LIKE sy-datum,
          to_date LIKE sy-datum.
       SELECT-OPTIONS and PARAMETERS
    SELECT-OPTIONS: p_status FOR rgdir-srtza DEFAULT 'A'.
    DATA: DATE1(15),
          mon(9).
       DEFINITION
    DEFINE rp-imp-c2-rx2.
      clear:
        orx-version,                       "OBJECTS_FOR_CLEAR
        rt, rt[].
      import
        ph-version to orx-version          "OBJECTS_FOR_IMPORT
        rt
      from database pcl2(ph) id rx-key using pcl2_exp_imp.
      rp-imp-rx-subrc = sy-subrc.
      if sy-subrc eq 0 and orx-version-number ne ph-version-number.
        rp-imp-rx-subrc = 8.
      endif.
    END-OF-DEFINITION.
    TYPE-POOLS: slis.
    DATA: g_repid LIKE sy-repid,
          gt_fieldcat TYPE slis_t_fieldcat_alv,
          gt_events TYPE slis_t_event,
          gt_top TYPE slis_t_listheader,
          gt_eol TYPE slis_t_listheader,
          gt_list_top_of_page TYPE slis_t_listheader,
          gt_list_end_of_list TYPE slis_t_listheader,
          gs_layout TYPE slis_layout_alv,
          d_f2code LIKE sy-ucomm              VALUE  '&ETA'.
    CONSTANTS: fn_top TYPE slis_formname VALUE 'TOP_OF_PAGE',
               fn_eol TYPE slis_formname VALUE 'END_OF_LIST'.
    DATA: it_alv_out TYPE STANDARD TABLE OF itab WITH HEADER LINE.
    INITIALIZATION.
    g_repid = sy-repid.
    PERFORM f_fieldcat_init USING gt_fieldcat[].
    PERFORM eventtab_build USING gt_events[].
       START-OF-SELECTION.
    START-OF-SELECTION.
    fr_date = to_date = pn-endda.
    fr_date+6(2) = '01'.
      SELECT SINGLE * FROM t549a
         WHERE abkrs = pnpxabkr.
      GET PERNR.
        CLEAR: itab, lname.
        PERFORM get_rt_tab.
    END-OF-SELECTION.
      PERFORM display_grid.
      INCLUDE rpppxm00.
    USING DATM
          FORM get_rt_tab                                               *
    FORM get_rt_tab.
      rp_provide_from_last p0001 space pn-begda pn-endda.
      rp_provide_from_last p0002 space pn-begda pn-endda.
      CALL FUNCTION 'CU_READ_RGDIR'
           EXPORTING
                persnr          = p0001-pernr
           IMPORTING
                molga           = country
           TABLES
                in_rgdir        = rgdir
           EXCEPTIONS
                no_record_found = 1
                OTHERS          = 2.
      IF sy-subrc = 0.
      SELECT single ltext FROM cskt
        INTO itab-ltext
        WHERE kostl = p0001-kostl
          AND datbi = '99991231'.
      SELECT SINGLE * FROM csks
        WHERE kostl = p0001-kostl
          AND kokrs = 'GSIS'
          AND datbi = '99991231'.
      IF sy-subrc = 0.
        MOVE: csks-kostl TO itab-kostl,
              csks-khinr TO itab-khinr.
      ENDIF.
        p_date = pn-paper.
      regular payroll run.
        CALL FUNCTION 'CD_EVALUATION_PERIODS'
             EXPORTING
                  bonus_date      = '00000000'
                  inper_modif     = t549a-permo
                  inper           = p_date
                  pay_type        = ' '
                  pay_ident       = ' '
             TABLES
                  rgdir           = rgdir
                  evpdir          = evpdir
             EXCEPTIONS
                  no_record_found = 1
                  OTHERS          = 2.
        IF sy-subrc = 0.
          LOOP AT evpdir WHERE srtza IN p_status and FPPER eq pn-begda+(6).
            rx-key-pernr = p0001-pernr.
            rx-key-seqno = evpdir-seqnr.
            rp-imp-c2-rx2.
            IF rp-imp-rx-subrc = 0.
              PERFORM rt_to_itab.
            ENDIF.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ENDFORM.
          FORM PRINT_RX                                                 *
    FORM print_rx.
      LOOP AT rt.
        PERFORM re512t USING country rt-lgart.
      ENDLOOP.
    ENDFORM.
          FORM RE512T                                                   *
    -->  VALUE(COUNTRY_GROUPING)                                       *
    -->  VALUE(WTYPE)                                                  *
    FORM re512t USING value(country_grouping)
                      value(wtype).
      CHECK t512t-sprsl NE sy-langu
         OR t512t-molga NE country_grouping
         OR t512t-lgart NE wtype.
      SELECT SINGLE * FROM t512t
           WHERE sprsl EQ sy-langu
           AND molga EQ country_grouping
           AND lgart EQ wtype.
      IF sy-subrc NE 0.
        CLEAR t512t.
      ENDIF.
    ENDFORM.
          FORM rt_to_itab                                               *
    FORM rt_to_itab.
      MOVE: basic TO w_basic,
            basic2 TO w_basic2,
            basic3 TO w_basic3,
            pera  TO w_pera,
            pera2 TO w_pera2,
            longp TO w_longp,
            longp2 TO w_longp2,
            srvaw TO w_srvaw,
            leave TO w_leave,
            trall TO w_trall,
            chall TO w_chall,
            chall2 TO w_chall2,
            chall3 TO w_chall3,
            meal  TO w_meal,
            saldf TO w_saldf,
            sipps TO w_sipps,
            sipps2 TO w_sipps2,
            subs  TO w_subs,
            hzard TO w_hzard,
            lallw TO w_lallw,
            medps TO w_medps,
            medgs TO w_medgs,
            pcontps TO w_pcontps,
            pcontps2 TO w_pcontps2,
            pcontps3 TO w_pcontps3,
            pagibps TO w_pagibps,
            pagibps2 TO w_pagibps2,
            LWOP  TO w_lwop,
            otime TO w_otime,
            otime2 TO w_otime2,
            otime3 TO w_otime3,
            otime4 TO w_otime4,
            npay  TO w_npay.
      LOOP AT rt WHERE lgart = w_basic or lgart = w_basic2
                                        or lgart = w_basic3.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-basic.
        itab-ec = rt-betrg / 100.
        if itab-ec > 100.
            itab-ec = 100.
        ENDIF.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pera.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pera.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pera2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pera.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_longp or lgart = w_longp2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-longp.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_trall.
        if rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        endif.
        ADD: rt-betrg TO itab-trall.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_srvaw.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-srvaw.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_leave.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-leave.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_chall or
                       lgart = w_chall2 or
                       lgart = w_chall3.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-chall.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_meal.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-meal.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_saldf.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-saldf.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_sipps or
                       lgart = w_sipps2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-sipps.
        itab-sipgs = itab-sipps / 9 * 12.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_subs.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-subs.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_hzard.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-hzard.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_lallw.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-lallw.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_medps.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-medps.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_medgs.
          IF rt-betrg < 0.
            rt-betrg = abs( rt-betrg ).
          ENDIF.
          MOVE: rt-betrg TO tempgs.
          itab-medgs = itab-medps.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pcontps OR
                       lgart = w_pcontps2 OR
                       lgart = w_pcontps3.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pcontps.
      ENDLOOP.
      itab-pcontgs = itab-pcontps * 9.
      LOOP AT rt WHERE lgart = w_pagibps OR
                       lgart = w_pagibps2.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pagibps.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_pagibps.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-pagibgs.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_lwop.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-lwop.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_otime or
                       lgart = w_otime2 or
                       lgart = w_otime3 or
                       lgart = w_otime4.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-otime.
      ENDLOOP.
      LOOP AT rt WHERE lgart = w_npay.
        IF rt-betrg < 0.
          rt-betrg = abs( rt-betrg ).
        ENDIF.
        ADD: rt-betrg TO itab-npay.
      ENDLOOP.
      COLLECT itab.
      CLEAR: itab.
      REFRESH rt.
    ENDFORM.                               " rt_to_itab
    *&      Form  f_fieldcat_init
          text
         -->P_GT_FIELDCAT[]  text
    FORM f_fieldcat_init USING rt_fieldcat TYPE slis_t_fieldcat_alv.
      DATA: ls_fieldcat TYPE slis_fieldcat_alv.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   1.
      ls_fieldcat-reptext_ddic    =  ' FXNAL Group'.
      ls_fieldcat-fieldname       =  'KHINR'.
      ls_fieldcat-ref_tabname     =  'ITAB'.
      ls_fieldcat-outputlen       =  12.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   2.
      ls_fieldcat-reptext_ddic    =  ' OFFICE'.
      ls_fieldcat-fieldname       =  'LTEXT'.
      ls_fieldcat-ref_tabname     =  'ITAB'.
      ls_fieldcat-outputlen       =  40.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   3.
      ls_fieldcat-reptext_ddic    =  ' RC #'.
      ls_fieldcat-fieldname       =  'KOSTL'.
      ls_fieldcat-ref_tabname     =  'ITAB'.
      ls_fieldcat-outputlen       =  5.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos           =   4.
      ls_fieldcat-reptext_ddic      =  'Basic Salary'.
      ls_fieldcat-tabname           =  'ITAB'.
      ls_fieldcat-fieldname         =  'BASIC'.
      ls_fieldcat-datatype          = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   5.
      ls_fieldcat-reptext_ddic      =  'PERA Allow'.
      ls_fieldcat-tabname           =  'ITAB'.
      ls_fieldcat-fieldname         =  'PERA'.
      ls_fieldcat-datatype          =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   6.
      ls_fieldcat-reptext_ddic    =  'Longevity Pay'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'LONGP'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   7.
      ls_fieldcat-reptext_ddic    =  'Service Award'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'SRVAW'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   8.
      ls_fieldcat-reptext_ddic    =  'Child Allowance'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'CHALL'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   9.
      ls_fieldcat-reptext_ddic    =  'Leave Mone'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'LEAVE'.
      ls_fieldcat-datatype        = 'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   10.
      ls_fieldcat-reptext_ddic    =  'Over-time'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'OTIME'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   11.
      ls_fieldcat-reptext_ddic    =  'Meal Subsidy'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'MEAL'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   12.
      ls_fieldcat-reptext_ddic    =  'Salary Diff.'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'SALDF'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   13.
      ls_fieldcat-reptext_ddic    =  'Subsistence'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'SUBS'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   14.
      ls_fieldcat-reptext_ddic    =  'Hazard Pay'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'HZARD'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
      CLEAR ls_fieldcat.
      ls_fieldcat-col_pos         =   15.
      ls_fieldcat-reptext_ddic    =  'Laundry Allow'.
      ls_fieldcat-tabname         =  'ITAB'.
      ls_fieldcat-fieldname       =  'LALLW'.
      ls_fieldcat-datatype        =  'CURR'.
      ls_fieldcat-outputlen       =  15.
      APPEND ls_fieldcat TO rt_fieldcat.
    ENDFORM.                    " f_fieldcat_init
    *&      Form  display_grid
          text
    -->  p1        text
    <--  p2        text
    FORM display_grid.
      SORT itab BY kostl khinr.
      LOOP AT itab.
        AT NEW khinr.
          MOVE-CORRESPONDING itab TO jtab.
          APPEND jtab.
        ENDAT.
      ENDLOOP.
      PERFORM my_top USING gt_top[].
      PERFORM build_layout USING gs_layout.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = g_repid
          is_layout          = gs_layout
          it_fieldcat        = gt_fieldcat[]
          it_events          = gt_events[]
        TABLES
          t_outtab           = itab.
    ENDFORM.                    " display_grid
    *&      Form  eventtab_build
          text
         -->P_GT_EVENTS[]  text
    FORM EVENTTAB_BUILD USING my_events TYPE SLIS_T_EVENT.
      DATA: ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
           EXPORTING
                i_list_type = 1
           IMPORTING
                et_events   = my_events.
    *TOP OF PAGE
      READ TABLE my_events
           WITH KEY NAME = slis_ev_top_of_page
           INTO LS_EVENT.
      IF SY-SUBRC = 0.
        MOVE fn_top TO ls_event-form.
        APPEND ls_event TO my_events.
      ENDIF.
      CLEAR ls_event.
    *END OF LIST
      READ TABLE my_events
            WITH KEY name = slis_ev_end_of_list
            INTO ls_event.
      IF sy-subrc = 0.
        MOVE   fn_eol TO ls_event-form.
        APPEND ls_event TO my_events.
      ENDIF. " SY-SUBRC for READ TABLE
    ENDFORM.                    " eventtab_build
    *&      Form  top_comment
          text
         -->P_MYTOP[]  text
    FORM top_comment USING my_top_of_page TYPE slis_t_listheader.
      DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
      DATA: ls_line     TYPE slis_listheader,
            li_recs     TYPE i,
            lc_name(60) TYPE c,
            lc_from(30) TYPE c,
            lc_to(30) TYPE c.
      CALL FUNCTION 'MONTH_NAMES_GET'
           TABLES
                month_names = it_t247.
    Company Name
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = TEXT-001.
      APPEND ls_line TO my_top_of_page.
      CLEAR ls_line.
      ls_line-typ  = 'S'.
      ls_line-info  = TEXT-002.
      APPEND ls_line TO my_top_of_page.
    Date
      CLEAR lc_name.
      CONCATENATE sy-datum+6(2) ',' INTO lc_name.
      READ TABLE it_t247 WITH KEY mnr = sy-datum+4(2).
      CONCATENATE text-003 it_t247-ltx lc_name sy-datum(4)
             INTO lc_name SEPARATED BY space.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO my_top_of_page.
    ENDFORM.                    " top_comment
    *&      Form  build_layout
          text
         -->P_GS_LAYOUT  text
    FORM build_layout USING my_layout TYPE slis_layout_alv.
      my_layout-f2code              = d_f2code.
      my_layout-reprep              = 'X'.
      my_layout-confirmation_prompt = 'X'.
      my_layout-flexible_key        = 'X'.
    ENDFORM.                    " build_layout
    *&      Form  TOP_OF_PAGE
          Writes comments on top of page
    FORM top_of_page.
      DATA: ls_line     TYPE slis_listheader,
            lc_name(60) TYPE c.
      IF sy-ucomm = '&RNT_PREV'.
        READ TABLE gt_top INTO ls_line INDEX 2.
        lc_name = ls_line-info.
        WRITE 'Page:' TO lc_name+45(5).
        WRITE sy-pagno TO lc_name+52(5).
        ls_line-typ  = 'H'.
        ls_line-info = lc_name.
        MODIFY  gt_top FROM ls_line INDEX 2.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                it_list_commentary = gt_top.
    ENDFORM. " TOP_OF_PAGE
    *&      Form  my_top
          text
         -->P_GT_TOP[]  text
    FORM my_top USING top TYPE slis_t_listheader.
      DATA: it_t247 LIKE t247 OCCURS 0 WITH HEADER LINE.
      DATA: ls_line     TYPE slis_listheader,
            li_recs     TYPE i,
            lc_name(60) TYPE c,
            lc_from(30) TYPE c,
            lc_to(30) TYPE c.
      CALL FUNCTION 'MONTH_NAMES_GET'
           TABLES
                month_names = it_t247.
    Company Name
      CLEAR lc_name.
      WRITE text-001 TO lc_name.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO top.
    **Report Name
      CLEAR lc_name.
      WRITE text-002 TO lc_name.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO top.
    Range of date
      CLEAR lc_name.
      lc_name = p_date+4(2).
      READ TABLE it_t247 WITH KEY mnr = p_date+4(2).
      CONCATENATE: text-003 it_t247-ltx sy-datum(4)
                   INTO lc_name SEPARATED BY SPACE.
      ls_line-typ = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO top.
    ENDFORM.                    " my_top
    *&      Form  END_OF_LIST
          Writes signature line at end of list
    FORM end_of_list.
      IF sy-ucomm = '&RNT_PREV' OR sy-ucomm = 'AUSW'.
        REFRESH gt_eol.
        PERFORM my_eol USING gt_eol[].
      ELSE.
        REFRESH gt_eol.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
           EXPORTING
                it_list_commentary = gt_eol
                i_end_of_list_grid = 'X'.
    ENDFORM. " END_OF_LIST
    *&      Form  my_eol
          text
         -->P_GT_EOL[]  text
    FORM my_eol USING eol TYPE slis_t_listheader.
      DATA: ls_line     TYPE slis_listheader,
            lc_name(60) TYPE c.
    Signature Line
      CLEAR lc_name.
      lc_name = '.'.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR lc_name.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR ls_line.
      ls_line-typ  = 'H'.
      WRITE 'Submitted By:' TO lc_name(28).
      WRITE 'Noted By:' TO lc_name+30(28).
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR: lc_name, ls_line-key.
      lc_name = '.'.
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
      CLEAR lc_name.   CLEAR ls_line.
      WRITE sy-uline(28) TO lc_name(28).
      WRITE sy-uline(28) TO lc_name+30(28).
      ls_line-typ  = 'H'.
      ls_line-info = lc_name.
      APPEND ls_line TO eol.
    ENDFORM.                    " my_eol

    1.U are not getting the data into Excel when u client Excel Buttton from the ALV display ?
    2.if yes then u will get one message stating that templet is Missing like this ?
    Regards
    prabhu

  • Not able to export web analysis report to excel smart view from workspace

    Not able to export web analysis report to excel smart view from workspace.
    Error :Web launch operation has been cancelled.
    Can anyone help me to resolve this issues

    I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
    My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
    @Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

  • Issue while exporting report to excel

    I have a report created using ssrs.
    In that i have set the body background property to an image
    And also set a header in the report
    Now while exporting it to excel, I need to remove the body background  image and header
    Need Help
    Thanks
    Abhinav

    The workaround is to use a parameter that control the hidden properties and image/value properties of the header contents and background image path respectively. We need to place the header contents to a textbox or a rectangle so that the "hidden"
    properties can be set or reset. Similarly for the image path or value properties of body section can be set or reset using expression. I am using external image URL. Refer below step.
    1. Add a parameter "Export". Set the Available values
    as "Specify values" and add the below labels and values.
    Label                                 Value
    Header/Image                    Header/Image
    No Header/Image               No Header/Image
    For Default Values,
    Select Specify values option and add value as "Header/Image". Click Ok to close the parameter properties.
    2. As my header section contains a textbox and wanted to hide while i export, select the textbox properties and set the visibility/hidden expression as, =IIF(Parameters!Export.Value <> "Header/Image", True, False)
    3. Similarly in the report body properties, select the image source option as "External" and set the expression as,
    =IIF(Parameters!Export.Value <> "Header/Image", "" , "http://localhost/Testing/NEW_06.jpg")
    4. Preview the report and select the export parameter option as "No Header/Image".
    Regards, RSingh

  • OBIEE - export report in Excel format on daily basis into shared folder

    Hi all,
    We are in process of moving from SAP Business Objects to Oracle BI EE and now the question is:
    how do I set schedule to export specified report in Excel format into shared network folder?
    I can do it easily in SAP BO.
    Is it possible at all in OBIEE?

    Check this
    http://oraclebizint.wordpress.com/2007/12/17/oracle-bi-ee-101332-calling-java-scripts-and-java-classes-from-ibots/
    Use JavaScript part that is more simple and easiest one.

  • Export the Report in Excel format

    Hi,
    How to export the Report in Excel format directly from the SAP to my Desktop.
    Plz. give me the process???
    Thanks

    use this,
    INCLUDE OLE2INCL.
    INCLUDE EXCEL__C.
    AND
             H_EXCEL TYPE OLE2_OBJECT,        " Excel object
              H_MAPL  TYPE OLE2_OBJECT,         " list of workbooks
              H_MAP   TYPE OLE2_OBJECT,          " workbook
              H_ZL    TYPE OLE2_OBJECT,           " cell
              H_F     TYPE OLE2_OBJECT,            " font
              H       TYPE I.
    AND
      PERFORM SUB_GET_DATA.
         'get data here
      PERFORM SUB_POP_DATA.
         'populate data here
    AND
      PERFORM SUB_DISP_EXCEL.
    *&      Form  SUB_DISP_EXCEL
    FORM SUB_DISP_EXCEL.
       START EXCEL
      CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
    SET PROPERTY OF H_EXCEL  'Visible' = 1.    " for printing o/p line by line in excel sheet
    get list of workbooks, initially empty
      CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
    add a new workbook
      CALL METHOD OF H_MAPL 'Add' = H_MAP.
    output column headings to active Excel sheet
      PERFORM FILL_CELL USING 1  1 1   10  'Mat Doc Number'(001) 'R'.
      PERFORM FILL_CELL USING 1  2 1    4  'Item'(002) 'R'.
      PERFORM FILL_CELL USING 1  3 1   10  'Mat Doc Date'(003) 'R'.
      PERFORM FILL_CELL USING 1  4 1   10  'Vendor'(004) 'R'.
      PERFORM FILL_CELL USING 1  5 1   20  'Mat Doc Item amount'(005) 'R'.
      PERFORM FILL_CELL USING 1  6 1   15  'Material price'(006) 'R'.
      PERFORM FILL_CELL USING 1  7 1    4  'Currency'(007) 'R'.
      PERFORM FILL_CELL USING 1  8 1   18  'Material'(008) 'R'.
      PERFORM FILL_CELL USING 1  9 1   30  'Material Desc'(009) 'R'.
      PERFORM FILL_CELL USING 1 10 1   19  'Qty in Unit of Entry'(010) 'R'.
      PERFORM FILL_CELL USING 1 11 1   19  'Qty Received'(011) 'R'.
      PERFORM FILL_CELL USING 1 12 1    4  'Unit of Entry'(012) 'R'.
      PERFORM FILL_CELL USING 1 13 1   20  'Mat Group'(013) 'R'.
      PERFORM FILL_CELL USING 1 14 1   16  'Vendor Invoice'(016) 'C'.
      LOOP AT T_OUT INTO W_OUT.
    copy flights to active EXCEL sheet
        H = SY-TABIX + 1.
        PERFORM FILL_CELL USING H  1 0 10 W_OUT-MBLNR 'R'.
        PERFORM FILL_CELL USING H  2 0  4 W_OUT-ZEILE 'R'.
        PERFORM FILL_CELL USING H  3 0 10 W_OUT-BLDAT 'R'.
        PERFORM FILL_CELL USING H  4 0 10 W_OUT-LIFNR 'R'.
        PERFORM FILL_CELL USING H  5 0 20 W_OUT-DMBTR 'R'.
        PERFORM FILL_CELL USING H  6 0 15 W_OUT-NETPR 'R'.
        PERFORM FILL_CELL USING H  7 0  4 W_OUT-WAERS1 'R'.
        PERFORM FILL_CELL USING H  8 0 18 W_OUT-MATNR 'R'.
        PERFORM FILL_CELL USING H  9 0 30 W_OUT-MAKTX 'R'.
        PERFORM FILL_CELL USING H 10 0 19 W_OUT-ERFMG 'R'.
        PERFORM FILL_CELL USING H 11 0 19 W_OUT-WEMNG 'R'.
        PERFORM FILL_CELL USING H 12 0  4 W_OUT-ERFME 'R'.
        PERFORM FILL_CELL USING H 13 0 20 W_OUT-WGBEZ 'R'.
        PERFORM FILL_CELL USING H 14 0 16 W_OUT-XBLNR 'C'.
        CLEAR W_OUT.
      ENDLOOP.
    CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
      CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTIN    G #1 = 2.
      SET PROPERTY OF H_EXCEL  'Visible' = 1.
      PERFORM ERR_HDL USING 'Unable to create workbook'.
    add a new workbook
    CALL METHOD OF H_MAPL 'Add' = H_MAP  EXPORTING #1 = 2. "----------can remove-------THIS IS FOR STAY AT LIST
      PERFORM ERR_HDL USING 'Unable to create new workbook'..
      FREE OBJECT H_EXCEL.
      PERFORM ERR_HDL USING 'Unable to free workbook'.
    ENDFORM.                    " SUB_DISP_EXCEL
          FORM FILL_CELL                                                *
          sets cell at coordinates i,j to value val boldtype bold       *
    FORM FILL_CELL USING I J BOLD COL VAL I_HORIZON_ALIGN.
      CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
      PERFORM ERR_HDL USING 'set cell object error'.
      SET PROPERTY OF H_ZL 'Value' = VAL .
      PERFORM ERR_HDL USING 'set value  object error'.
      GET PROPERTY OF H_ZL 'Font' = H_F.
      PERFORM ERR_HDL USING 'set font  object error'.
      SET PROPERTY OF H_F 'Bold' = BOLD .
      PERFORM ERR_HDL USING 'set bold  object error'..
      SET PROPERTY OF H_ZL 'ColumnWidth' = COL.
      PERFORM ERR_HDL USING 'set columnwidth object error'.
      IF NOT I_HORIZON_ALIGN IS INITIAL.
      IF I_HORIZON_ALIGN = 'L'.
      SET PROPERTY OF H_ZL 'HorizontalAlignment' = XLLEFT.
      ELSEIF I_HORIZON_ALIGN = 'R'.
      SET PROPERTY OF H_ZL 'HorizontalAlignment' = XLRIGHT.
      ELSEIF I_HORIZON_ALIGN = 'C'.
      SET PROPERTY OF H_ZL 'HorizontalAlignment' = XLCENTER.
      ENDIF.
      ENDIF.
      PERFORM ERR_HDL USING 'set Alignment object error'.
    ENDFORM.                    "FILL_CELL
    *&      Form  ERR_HDL
          outputs OLE error if any                                       *
    -->  p1        text
    <--  p2        text
    FORM ERR_HDL USING VAL.
      IF SY-SUBRC <> 0.
        WRITE: / VAL.
        STOP.
      ENDIF.
    ENDFORM.                    " ERR_HDL

  • Historical Report - export report in excel format

    Hi,
    We are on UCCX 8.0 (SU2). We have an issue with Historical when we tried to export report in excel format, the report does not display in correct column. It's very confusing. We could manually correct (rearrange) the column label but it take lots of time as we have so many reports.
    Is there anyway to fix this issue? Does anyone experience the same issue with Historical Report?
    I attached the pictures for example.
    Thanks,

    This type of behavior is a bug. I took a look in the bug toolkit and there are several defects filed against the Agent Summary report in 8.0 but not one that matches this behavior. I would venture a guess that a DE was sloppy when fixing another bug and introduced this on us.
    You should open a TAC case on this. It is also possible that this defect already exists but is not public in the toolkit yet.

  • Exporting report to Excel format

    We try to implement automated export to Excel Format but Crystal Report XI Java runtime doesnu2019t support export to Excel Format but pdf.
    Do I need to migrate to Crystal Report Eclipse 2.0 for exporting report in Excel format?
    Or I can deploy the Crystal Report Eclipse 2.0 Java runtime only for exporting to Excel Format?

    As I know, you can easily export the data from an MS Access Report to Excel, but it's really hard to get the formats exported along with the data, or just not doable at all. 
    Please see these links:
    http://www.howtogeek.com/howto/microsoft-office/export-an-access-2003-report-into-excel-spreadsheet/
    http://www.access-programmers.co.uk/forums/showthread.php?t=143884
    Also:
    https://social.msdn.microsoft.com/Forums/office/en-US/826a30c5-775e-4a51-b639-2ffb046bfe85/formatted-access-report-to-excel
    Also, keep in mind...it's easy to export the data from a report to Excel.  You can certainly setup Excel as a template, which has all the formatting applied and just sits on your disk drive...somewhere...waiting for you to dump new data into it from
    a new report...whenever you need it.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

  • In SSRS , after exporting report in excel,wrap text property for cell and freeze column for SSRS table header not working in Excel

    I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
    to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ? 

    Hi Amol,
    According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
    In Reporting Services, when exporting to excel file, it has limitation for textbox.
    Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
    Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
    In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
    AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
    Reference:
    Exporting to Microsoft Excel (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Exporting report to excel format via VBA to work in 2007 runtime

    Hi
    What code can I use to export a report to excel format file which will work in Access 2007 runtime?
    Thanks
    Regads

    As I know, you can easily export the data from an MS Access Report to Excel, but it's really hard to get the formats exported along with the data, or just not doable at all. 
    Please see these links:
    http://www.howtogeek.com/howto/microsoft-office/export-an-access-2003-report-into-excel-spreadsheet/
    http://www.access-programmers.co.uk/forums/showthread.php?t=143884
    Also:
    https://social.msdn.microsoft.com/Forums/office/en-US/826a30c5-775e-4a51-b639-2ffb046bfe85/formatted-access-report-to-excel
    Also, keep in mind...it's easy to export the data from a report to Excel.  You can certainly setup Excel as a template, which has all the formatting applied and just sits on your disk drive...somewhere...waiting for you to dump new data into it from
    a new report...whenever you need it.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Maybe you are looking for