Analyzer User/Group Preferences

I am having issues with my users view in Analyzer 7.2.5. The folders/groups a user has access to changes nearly every time they login. First time user logins they see there presentations group folders and their user folders. They log out and log back in a minute later, they can't see their startup group or their own folders, but the everyone folder is now visible in their list even though no users are in the everyone group. Using Analyzer 7.2.5.3 on weblogic with Essbase 7.1.6. Any suggestions welcomed.<BR><BR>Thanks

Hi Yagame,
There is a Mac OS X Server v10.6 Snow Leopard forum in this link, where reposting your question, may provide you with the direction you require.

Similar Messages

  • To use the "Users & Groups" preferences pane, System Preferences must quit and reopen.

    When I try to access some of the system preferences in Mavericks I get an error pane that states "To use the “Users & Groups” preferences pane, System Preferences must quit and reopen."
    Has anybody had this problem and if so what is the fix?

    Usually happens if you opened one that was 32-bit. Then, you need to revert back to 64-bit.

  • Users&groups preferences pane wants to open in 32-bit mode

    Crazy isn't it? The users&groups preferences pane says: "To use the "Users & Groups" preferences pane, System Preferences must quit and reopen (like with 32-bit pps). when I click ok, it says: "Preferences Error, Could not load Users & Groups preferences pane."

    I had to reinstall Lion, just running the installer again, not a clean install and the problem was gone. Just give it a try (hopefully) nothing to lose...

  • Could not load Users & Groups preference pane.

    Hi,
    After upgrading to Lion from 10.6 i got this message. Preferences pane : Could not load Users & Groups preference pane.
    I am unable to create accounts and access them.
    I reinstalled the lion from the apple store again, and I cannot create, delete, or access the account setup.
    Any help is appreciated.
    thanks,
    Francisco

    I am still getting the same message :
    Preferences error :
    Could not load Users & Groups preference pane.
    Every time i try to go to accounts I get that message.
    Something is not allowing me to add accounts...
    drwxr-xr-x  3 root  wheel  102 Aug  4 21:11 Accounts.prefPane 
    drwxr-xr-x  3 root  wheel  102 Jul 14 14:29 Appearance.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug 25 19:52 Bluetooth.prefPane
    drwxr-xr-x  3 root  wheel  102 May 25 21:36 DateAndTime.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug  1 19:22 DesktopScreenEffectsPref.prefPane
    drwxr-xr-x  3 root  wheel  102 May 25 17:58 DigiHubDiscs.prefPane
    drwxr-xr-x  3 root  wheel  102 May 27 20:42 Displays.prefPane
    drwxr-xr-x  3 root  wheel  102 May 25 16:28 Dock.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 21 16:03 EnergySaver.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 25 18:46 Expose.prefPane
    drwxr-xr-x  3 root  wheel  102 May 25 17:51 FibreChannel.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug  2 23:38 Ink.prefPane
    drwxr-xr-x  3 root  wheel  102 Sep 23 20:57 InternetAccounts.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 25 18:50 Keyboard.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug  1 15:58 Localization.prefPane
    drwxr-xr-x  3 root  wheel  102 Sep 13 22:46 MobileMe.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 25 18:51 Mouse.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug 11 19:46 Network.prefPane
    drwxr-xr-x  3 root  wheel  102 Sep 13 22:15 ParentalControls.prefPane
    lrwxr-xr-x  1 root  wheel   21 Nov  9 23:03 PrintAndFax.prefPane -> PrintAndScan.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 21 16:14 PrintAndScan.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug 23 21:20 Profiles.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug 23 21:18 Security.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 25 18:47 SharingPref.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug 20 14:47 SoftwareUpdate.prefPane
    drwxr-xr-x  3 root  wheel  102 Jun  1 22:27 Sound.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 31 17:15 Speech.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 17 14:33 Spotlight.prefPane
    drwxr-xr-x  3 root  wheel  102 Jun 20 17:54 StartupDisk.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 26 22:47 TimeMachine.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 25 18:51 Trackpad.prefPane
    drwxr-xr-x  3 root  wheel  102 Aug 16 18:07 UniversalAccessPref.prefPane
    drwxr-xr-x  3 root  wheel  102 Jul 12 16:42 Xsan.prefPane
    drwxr-xr-x  3 root  wheel  102 Sep 20 22:21 iCloudPref.prefPane
    This is what i am getting.
    THanks.

  • Can't open Users & Groups preference pane?

    I am only user on my MBA. I was going to add wife as another user, but each time I try open User and Groups in System Preferences I get:
    Preference Error
    Could not load Users & Groups preference pane.
    I found this post on the same issue. I also recently upgraded to Mountain Lion from Snow Leopard. I tried to follow the suggestion to open via Terminal app by entering /System/Library/PreferencePanes/Accounts.prefPane, but only got response that it is a directory.
    Armando

    1. You have a corrupt user picture.
    2. Read this whole message before doing anything. If you're not sure you understand it, STOP. Get someone with more experience to help you; e.g., by making a "Genius" appointment at an Apple Store.
    3. Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now. If you don't have backups, or you don't know how to restore from them without being able to log in, STOP.
    4. Triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/Directory Utility.app
    Rght-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu.* The application Directory Utility will open.
    5. In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select your user account in the list. On the right is a list of properties and values. Select the property "JPEGPhoto" and delete it by clicking the minus-sign icondirectly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
    CAUTION: Do not click the minus-sign icon on the left, below the user list.
    Then click the Save button in the lower right corner of the window. Quit Directory Utility.
    6. Try again to open Users & Groups. If it still doesn't work, repeat the above steps with any other users you created. You'll need to reset the user pictures. Don't use the same ones.
    7. Besides the users you created, there are many other items in the user list, representing built-in accounts. Don't change those accounts.
    8. CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • I have a Mac Pro using Lion, with a SSD for system.  Restored drive from backup.  Now logon password doesn't work.  Account password still works.  Changing password in user group preferences no longer works to change logon password.

    I have a Mac Pro using Lion, with SSD for system drive.  Drive stopped booting, but otherwise appeared healthy.  Restored from system backup.  Now drive seems to work properly, BUT my logon password no longer works.  Password OK for account; can access system preferences, and change user password there BUT logon still refuses to accept password.  No luck changing password for that account after adding new administrator account and logging on from that account.  Suggestions?  Thanks.

    If you redirect Accounts to another location (not on the Boot Drive) you need to direct them back there again after a restore.
    SystemPreferences > Accounts/User&Groups > ...
    ... Unlock the lock, then hold down Control as you click on an Account to get access to the Advanced Options pane.

  • What happened to user/group preferences in lion server?

    I am installing Lion server and using am using the new server admin tools.  The user/groups function is very different than Leopard/Snow Leopard.  Many of the parameters are missing.  We use the group preferences to restrict access to printers.  That function seems to be missing.

    jimshaughn
    The print service has been eliminated from Lion so the old familiar way is gone.
    However if you set up the Profile Manager service and then go to the management website of your server linked in the Server application, I believe you will be able to limit printers to specific users and groups.  I have not implemented it yet, but I do remember seeing those options in there when I began looking at it.  The difficulty with the Profile Manager is that it appears to require that the clients be 10.7.  The new abilities in Profile Manager are actually pretty nice and seem easier to configure than WGM / Server Admin in my cursory review of the settings and options.
    I am moving servers first so for me this is a bit of a challenge for me too since our clients are still 10.6.  I had to bring computers and groups into the OD via WGM which will still cover the old machines.  Control is split until all clients are up to date which is a little frustrating.
    Have you set up the printers on the server itself and then edited the users/groups from WGM on the server itself which may allow you to still add the printers attached directly?  It appears that you can still do that.
    Hope this helps.
    -Erich

  • HT4798 How do I gain access to Users & Groups preferences when I cannot even log in.

    I only have one apple ID linked and I cannot reset my password via the pop up box and cannot access the user groups as I cannot even log in.
    Can anyone help.
    Thanks
    Matt

    Reset Password
    OS X 10.6 Snow Leopard
    Follow the instructions in  second and third boxes.
    Reset Password using Recovery HD
    OS X 10.7 Lion /10.8 Mountain Lion
    Follow the instructions in the first and third boxes.
    http://pondini.org/OSX/Password.html
    Note
    Keychain
    I don't remember my original (former) account password
    https://support.apple.com/kb/HT1631

  • User group preferences

    Hi,
    I'm super new at OSX server.  The only thing I can tell you for certain is I've set up the server correctly with DNS running correctly.
    My problem is, we have Student, Office & Administrative computers.  Each requires a different set of Preferences configured in the Workgroup Manager for OSX Server 10.6.8. 
    Instructions I've found ask me to create a Guest Computer on the Computers Tab of the Workgroup manager and apply preferences there.  This ends up applying preferences to all computers bound to the server. 
    How do I establish different user preferences for the different computer groups I've listed below.
    iMacs+Snow Leopard = Office Computers
    Macbooks+Snow Leopard = Student Computers
    Macbook Pro + Lion/Snow Leopard = Administrators
    I'll keep reading thru these forums in case the answer is already here!
    Thanks in advance,
    Yag

    Hi Yagame,
    There is a Mac OS X Server v10.6 Snow Leopard forum in this link, where reposting your question, may provide you with the direction you require.

  • Unable to unlock Users & Groups preferences

    trying to add a new user or do anything in system preferences that requires me to unlock - I type in my password (correctly) and the lock will not open.
    Using a MacBook 2.4 GHz Intel Core 2 Duo, running Snow Lepoard (10.7.4) logged in as adminstrator user.
    Any suggestions?

    Maybe these will help:
    Lost password reset
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    http://www.hackmac.org/?q=node/4

  • Mac book pro Users & Groups deleting problems

    I have a Macbook Pro, i believe its a 2008 15 inch, thats just come back from the repair shop.
    I added another user (through Users and Groups) changed the settings so that person was the admin and deleted the original user.
    Now after roughly an hour it is still saying that it is "deleting user" and if i try to close the window it says -
         "System Preferences is busy and can't be closed. Users & Groups preferences is removing a user account and saving the Home Directory to a disk image"
    How do i get about this? i do not want it frozen there, is that a way i can cancel all and start again or get it to hurry up and delete?
    Thanks

    You asked it to save the old User's files, and it is converting them to a Disk Image.
    What you asked for is complex, and it will take some time.

  • I cannot get onto my Users & Groups

    When I get onto System Preferences, it shows that Users & Groups is grayed out, or won't let me in it.
    Something will pop up, such as "Users & Groups is unavailible to you right now"...
    It was working fine earlier.
    Help?
    Thank you.

    "You can't open the "Users & Groups" preferences pane because it is not available to you at this time.
    This is what it says. ^^^^^^

  • HT3231 Problem with User & Group panel

    I cannot open the 'User & Group' panel.  I get Could not load Users & Groups preference pane."  How do I fix this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Error when opening User and Group Preferences

    After upgrading to Lion there is an error when opening User and Group Preferences.
    I´ve repaired permissions but the problem is still there...
    Thanks...

    Hi,
    Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
    or
    Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
    Hope it helps,
    Reward points if helpful.
    Regards,
    Shailesh Nagar

  • I can't open user and group preferences

    I cant open the User and Group preferences. please help!!!!!!!!!!!!

    do you click the lock in the bottom left hand corner and enter your password to unlock it?  Please explain why you can not open user and group preferences.

Maybe you are looking for