Analyzer won't open my Query
Hello Forum,
I'm trying to open a Query from BEx Analyzer and when selecting it, I see on the status bar "Processing..." and after a while it disappear and nothing shows up. I can access this query without any problem from BEx Web Analyzer.
I am able to open plenty of other queries or workbooks.
I created that query myself and I do have SAP_ALL so it not a security issue.
Any idea?
Thanks
Hello,
Please refer to Note 1101143 for general BEx Analyzer performance information. The issue may be caused by many potential influencers. A couple pieces of info for you..
1) If you are using the 7.x Analyzer in SAPGUI 7.10, ensure you have the latest .NET Framework 2.0 updates from microsoft
2) If you upgraded the machine from prior SAPGUI versions (i.e. 640 to 7.10) and applied .NET framework 2.0 after having 1.1 at one time, ensure you do not have a config file (.Config) in the system. Normally this config file exist in the below folder C:\Program Files\Microsoft Office\OFFICE11. This was only relevant for 1.1 so if it is there, remove it.
3) Check the statistics (RSDDSTAT_OLAP & RSDDSTAT_DM tables) to see where runtime is being spent. Potentially you are reading a large volume of data and it is having issues passing it to the frontend.
4) Test the query in tcode RSRT - this should be an easy way to validate general runtime of the query, and you can see statistics of runtime. The main difference is you do not have the frontend transfer to BEx, and rather it is displayed directly in SAPGUI.
Are you trying to open this particular query in Excel 2003, or Excel 2007?
Hope that helps.
Regards,
Tanner Spaulding
SAP NetWeaver RIG
Similar Messages
-
Unable to open a query view in web analyzer
Hi All
In web analyzer i have saved a Query view, Using save as tab.
when i tried to open that Query view through open tab in web analyzer it is throughing some exceptional error.
Is this the right way to access the saved query view, can anyone help me with your suggestion?
Thanks
SushmaHi,
Check this
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/bc5c78da1e1bbce10000000a1553f7/frameset.htm] -
QUB (query builder) won't open in browser
Recently, QUB won't open in my browser. When I click on edit or new query, I am switched over to FIrefox (or my computer will open FIrefox if it is not running) but QUB won't load at all. Any ideas are greatly appreciated.
You may have used the 32-bit IE edition previously.
On Windows 7, if opened from the Task Bar, it will open 32-bit. From the Start Menu it will open 64-bit.
Open Help | About Internet Explorer to see if you are using the 32-bit or 64-bit edition. -
Problem opening a query in BEx Analyzer 7.10
Hello,
we have problems with the BEx Analyzer, an empty screen is
displayed when we open a query.
I'm going to explain the steps:
We open Analyzer, goto open query, logon into BW window appears and then, before the screen to select query from an Infoarea, roles, etc is load, the Analyzer seems to open the SAP Logon and an empty screen from R/3 appears.
We can not close this R/3 empty window, only when we close the Analyzer this windows is closed.
The problem happens with the SAP GUI 6.40, so we updated to
SAP GUI 7.10, installed patches, addons and windows/ office
patches but the problem persists.
How can we solve this issue?
Thanks in advanced.
Best regards,Yes, I have done all the installations that the notes said and the pre-requisites:
- Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 1.1.
- Microsoft .NET Framework 2.0 + .NET Framework 2.0 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 2.0.
- Microsoft Officce 2003 patches (KB907417, KB945185) + Office 2003 SP3
- bi710sp03_300 and bi710sp04_400
- gui710_6-10002995.exe and kw710_1-10004321.exe
But the problem persist.
I have executed BI Frontend installation check tool (sapbexc710.xla) and seems everything is OK.
Regards, -
Problem in opening a query in BEX analyzer..
i am using front end sap gui 7.20 with patch 9..
my issue is that when i tried to open a query in bex analayzer. i get following error stating that
you donot have suffiecent authorizations for the infoprovider XXXXXX
function module /SDF/AL_MAP_TRANSID_LOGH does not exist
and i tried to open a query from bex query designer ..i am not able execute it
and i get strange error while executing tcode rrmx..the status error states that microsoft excel is not installed, install microsoft excel viewer
after installing microsoft excel viewer also..i get the same error...
pls suggest asap guysHi Satish,
You can ask yur tech support team to install sap gui and in specify them to tick "SAP BW add ons".
also Enable the macros for the analyser.
Regards
Rahul -
Error in Opening a query after Authorization.
Dear Experts,
in a requirement to restrict the users to access some specific queries only I have created the role and assigned some queries to those role in PFCG. The user is able to see only the authorized queries when he login to BEx Analyzer . Now the problem is that when he opens the query instes of getting the prompt for variable values entry he is getting some message as
" Error in specifying the value for variable for Fiscal year and plant."
however the query is opened success fully with my ID which has all authorization.
in Role maintenance I have provided following authorization to the user .
1. Business Explorer - Global variables
2. Authorization Check for RFC Access
3. Transaction Code Check at Transaction Start
4.BI Analysis Authorizations in Role
Business Explorer - Components
Business Explorer - Components: Enhancements to the Owner
Business Explorer - Enterprise Reports
Business Explorer - Folder View On/Off
Data Warehousing Workbench - Hierarchy
Data Warehousing Workbench - InfoCube
Data Warehousing Workbench - InfoObject
Data Warehousing Workbench - MultiProvider
Data Warehousing Workbench - DataStore Object
Authorization Object for RS Trace Tool
5. Business Explorer - Variants in Variable Screen
could please some one tell where i am missing , are what is wrong with it.
Thanks !you may wish to try executing the queries using the RSECADMIN and analyzing the log for the same.
Hope it Helps
Chetan
@CP.. -
FCE 4.0.1 won't open when I click the icon in the Dock or in the Applications icon of FCE. It had been working well but I had trouble when I trashed the reference Scratch disk to a project and I was asked to get it back. I checked all my drives through verify in Disk Utility and a couple needed repair - eventually were given the OK. I then Shut Down and rebooted, I then trashed the FCE App and reinstalled from the Install discs and , finally, I tried opening a FCE project. None of these caused the FCE App to open with Browser, Viewer, Canvas,. Time Line. All that happens is the the first FCE window, the one that says FCE registered to...and the other that says loading AE Effects, Video Effects does show but then nothing except my Desktop with it's various folders and files I also downloaded the Plug In Tom Wolsky suggested to a recent query.
All I can think of is to backup everything to HDs and take this iMac in for a service.It is only six months old - I reckon it will be poor driving by it's proud but unskilled driver!
James Bowman
New ZealandDon't panic . . . . . yet!
You may not have trashed FCE properly.
Deleting the application icon is useless as there are a number of files hidden elsewhere which may be corrupt.
Download this free app to uninstall FCE completely and then reinstall it.
FCS Remover - Uninstall Final Cut Studio, Final Cut Pro, Motion, Compressor, Soundtrack Pro, Color, DVD Studio Pro, LiveType, Cinema Tools
I know it is called FCS Remover but it also works for FCE. -
Is it possible to open a query from sap menu favorite to excel?
Hi all
I have added a query in favorite . From the favorite in sap menu , i want to open the query in excel.
Is is possible?
Currently the query open in web.
Please revert back if you have any idea
Thanks
ajayHi Daya Sagar,
You said the query saved in favorite from query designer will open in browser and the one saved from analyzer will open in bex excel. But it does not work for me. It saves as web icon and both query is opening in browser.
Hi All,
The different story for me is I have problem of opening the web browser by running a query from favorite or user menu because in the url I have different Client. Is there any way to fix this url problem. Any one in this thread can help me on this issue and will be awarded. Thanks.
Raj -
System error in opening a query
hi guys,
this is the error i'm getting when opening this query which i need for my CR
Abort System error in program in SAPLRR12 and form cell_fuellen_acell-01
Diagnosis:
This internal error is a targeted termination since the program has an
incorrect status.
what is needed to be done here
Your help will be rightly appreciated
ThanksHi Vj,
Please check the SAP notes as below, which seems to be relevant for your issue.
Assign points it useful.....
Symptom
There are errors in Business Explorer components such as Analyzer, Browser, Form Reporting, Web Application Designer, Query Designer, Map, OLE DB for OLAP Provider
Solution General information
This note contains information about BW 3.0A front end patch 3. Here, you will find the most important information on:
Installation
Error corrections
New features
Additional general information that is not specifically for this BW front end patch.
Procedure
Downloading BW front end patches via FTP from sapserv
Downloading a BW front end patch via Online Correction Support (SAPnet)
Preparing the Installation Server
Checking the Installation Server
Installation on PC
Checking the PC
Problems during the installation of the BW front end Patch
Distributing a patch per script (for administrators only)
Installation
During the installation of the BW front end patch, note the following:
(This area is constantly updated)
The BW 3.0A front end patch 3 is based on the SAP GUI 6.10 Presentation CD 1 (6.10 Final Compilation 3, material number 50051811) and the SAP GUI 6.10 patch 12 or higher.
The BW 3.0A front end patch 3 contains all files, to convert a BW 2.0B/2.1C front end into a BW 3.0A front end.
The BW 3.0A front end is downward-compatible to BW 2.0B/2.C.Thus, it can also be used on BW 2.0B/2.1C backend systems.
When you use the Web Application Designer, implement at least BW 3.0A Support Package 03 (see note 425995).
Error corrections
This BW front end patch corrects the following errors in particular:
in SAP Business Explorer Analyzer
Displaying document links on filter cells and text elements
Improved performance for low-speed connections (WAN)
Bug:Incorrect language when starting documents in the Web browser (refer to note 450200)
Bug:Import of missing styles does not import the color palette anymore (refer to note 450194)
Bug:Various problems during the server logon as of Release 2.0 (incorrect list of Goto destinations, incorrectly indented hierarchy symbols...)
Bug: Starting jump destinations in the Web does not work
in BEx Query Designer
The system does not correctly interpret characteristics that were selected as being unique in each cell and when it checks these characteristics, it mistakenly reports them as being defined non-uniquely.
After you called the cell editor, you had to press the toolbar buttons twice to call the required function.
In the cell editor, you could change the formula cells but not the formulas of the columns or of the rows because the system displayed all references to other columns or rows as 25 digit numbers.
When you use Save as ... for queries with formula cells, these cells are not copied.
When you used the Save as ... function for queries with cells, the copied query sometimes displayed the message "Brain 299 SAPLRRI2 Form CELL_FUELLEN_ACELL-01-" when it was executed.
When you used the Save as ... function for queries with formula cells, these cells were not copied.
in Variable Editor
Formula variables that were replaced with the "To" value in intervals, were displayed without the "To" selection when you changed them.
in SAP Business Explorer Browser
Drag&Drop of Japanese file names on Japanese WinNT computers is now supported
Temporary files are automatically deleted when the BEx Browser is exited
New features
New features delivered with this BW front end patch:
SAP Business Explorer Analyzer
Delete function in dialog "Open -> Views"
Displaying documents for text elements and filter values
Now the BW front end is installed in a separate program folder in the start menu. The folder is called 'Business Explorer'.The setup only allows you to change the name of the folder of the SAP front end.
Procedure
1. Downloading the BW front end patch via FTP or SAPnet
2. Preparing and checking the installation server
3. Installing and checking on the PC
Note that you cannot install a BW front end patch directly on a PC (also see the 'Distribution of a patch by script' section).
The check of every step with SAPBEXC.XLA avoids unnecessary subsequent problems.
Downloading BW front end patches via FTP from sapserv
Downloading patches from the sapserv is described in note 96885, "Downloading a front end patch from SAPSERVx".
The BW 3.0A front end patches and the SAP GUI 6.10 patches are in the directory
sapservX/general/frontend/patches/rel610/Windows/Win32
The file name of the BW front end patch is
BW30A_n.EXE (where 'n' is the number of the BW front end patch)
The file name of the SAP GUI patch is
GUI610_n.EXE (where 'n' is the number of the SAP GUI patch)
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Downloading a BW front end patch via Online Correction Support (SAPnet)
You can also download BW front end patches in the SAPnet.The URL for the SAP Online Correction Support is:
http://service.sap.com/swcenter-main
After you select SAP BW/SAP BW 3.0A/Binary Patches/SAP GUI for Windows 6.10/Win32 in the tree on the right side, the SAP Download Area appears on the left side.
Here you can select BW30A.EXE and, if necessary, GUI610.EXE for downloading.
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Preparing the Installation Server
The installation of patches on the installation server is described in note 361222. Follow the instructions in this note.
A BW front end patch contains all files from the previous patches, so that you only need to install the latest patch.
Checking the Installation Server
Note 197460, "BW front end Checktool sapbexc.xla", describes how easily and quickly you can check the installation server.
Installation on PC
The BW front end patch is installed by executing the SAP GUI setup.In the setup, you must select the BW add-ons component to install the BW front end.
See also the section distribution of a patch per script.
Checking the PC
Note 197460, "BW front end Checktool sapbexc.xla", describes how simple and fast the local installation checks a PC
The local execution of SAPBEXC.XLA is necessary if you sent problems to the SAP Support (see note 142705).The status of a PC can be checked with the result of SAPBEXC.XLA.
Problems during the installation of the BW front end patch
If problems occur during the installation of the BW front end patches, you should install the BW front end patch again and use the following method for this:
First, remove the BW front end with "Remove" menu option under "SAP front end" from your local PC.
Afterwards you can install the front end programs again with the setup program of your setup server.The setup program has been delivered with the front end CD.You must have administrator rights on the local PC.During the setup, no other programs (for example, Excel) should run.
Certain programs save information on OLE components in special files.These files are not updated automatically during a new installation, therefore, when you change the OLE component during the installation, old information may remain in the system.We recommend you delete all files with the extensions ".EXD" and ".OCA" before you carry out the new installation.
Distributing a patch per script (for administrators only)
There is a large number of products for the distribution of software (for example, Microsoft SMS, IBM Tivoli, NetSupport NetInstall), so that no individual Support is possible when you use SAP and BW.There are two general notes about the front end installation (153341 and 194859), to which the system also refers.
The following remarks are intended for administrators who want to distribute a BW front end patch with such a software.
A BW front end patch consists of several files in different directories. These directories correspond to the directories on the installation server or on the CD.The files are usually distributed into the following directories on the local PC:
c:\program files\common files\sap\system
c:\program files\sappc
c:\winnt\system32 or c:\windows\system
In the sapbexc.xla file on the "Version" tab, there are notes about where the file must be copied to and whether it must be registered.
For the preparation of a script, first you should make a normal installation on a local PC from the installation server which must be checked with sapbexc.xla (see note 197460).Afterwards you can localize the corresponding directory of a file using this PC.In general, each DLL and each OCX must be registered if it can be registered.After the installation per script, a deinstallation may no longer work, therefore, before registering a file with regsvr32.exe <Path\File>, you should execute the script for an unregistration with regsvr32.exe /U <path\file>.
Currently, the sapbexc.xla checktool may not be able to recognize certain installation errors (copy without registrations) (see note 206609).
SAP offers support for problems with incorrect scripts for distributing patches.
Best Regards,
DMK
Assign Points if it helps.... -
Eorror in Opening a query after Authorization
Dear Experts,
in a requirement to restrict the users to access some specific queries only I have created the role and assigned some queries to those role in PFCG. The user is able to see only the authorized queries when he login to BEx Analyzer . Now the problem is that when he opens the query instes of getting the prompt for variable values entry he is getting some message as
" Error in specifying the value for variable for Fiscal year and plant."
however the query is opened success fully with my ID which has all authorization.
in Role maintenance I have provided following authorization to the user .
1. Business Explorer - Global variables
2. Authorization Check for RFC Access
3. Transaction Code Check at Transaction Start
4.BI Analysis Authorizations in Role
Business Explorer - Components
Business Explorer - Components: Enhancements to the Owner
Business Explorer - Enterprise Reports
Business Explorer - Folder View On/Off
Data Warehousing Workbench - Hierarchy
Data Warehousing Workbench - InfoCube
Data Warehousing Workbench - InfoObject
Data Warehousing Workbench - MultiProvider
Data Warehousing Workbench - DataStore Object
Authorization Object for RS Trace Tool
5. Business Explorer - Variants in Variable Screen
could please some one tell where i am missing , are what is wrong with it.
Thanks !Hello,
Check whether the user has the access to the plant and company code.
This is related a BW security , please re-post the same thread in BW forum or preferably in BASIS forum, they may be able to guide you properly.
Prase -
Mail 4.5 won't open after updating software mac OS x 10.6.8
After running the software update on my Imac OS X 10.6.8, my mail app 4.5 won't open anymore, the new one 4.6 won't either. I have tried EVERYTHING I have found on the problem, incl downloading and installing the Mac OSX Upd Combo, the SecUpd2012-004 etc. Both mail applications ARE in the applications folder...
I still get the same message: " It (4.5) can't be used on this version of Mac OS x. Try opening the version of Mail located in the Application folder on your computer...."
Please HELP, what can I do?Hello, just ran accross your query.
Was Mail ever moved out of the Applications folder?
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US -
Mac mail 4.5 won't open now 10.6.8 combo update installed
I have been having problems updating software and it was suggested that I installed the 10.6.8 combo update, this i have done and since then my mac mail 4.5 won't open - 'you can't use this version of Mail with this version of Mac OS X ' message!!
What is the simplest way of resolving this problem please?
Thanks
JulieHello, just ran accross your query.
Was Mail ever moved out of the Applications folder?
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US -
OneNote won't open, safeboot
After the update today, my Onenote 2013 won't open. I'm running Windows 8.1.
It just keeps giving me the safeboot screen and none of the options work. I've deleted ALL my office programs, cleaned the computer as thoroughly as I know how, run a virus/malware check, and rebooted who knows how many times. I then reinstalled Onenote
(did this process through twice) with the free version, because I can't get access to my boot CDs till tomorrow, and still I get the safeboot screen (tried to include screencaps, but it won't let me verify my account to do so).
None of those options work. Safeboot is my fail. No matter which one I click I get the "reporting error" box and no help.
Before I removed Office 2013, my word program still worked fine. I don't know what the issue is, but I need onenote back. The other programs I can reinstall whenever/whatever (relatively soon, because I have the comp for freelance work, but not right this
minute like I need onenote).Hi,
Please first try delete the OneNote cache manually and then test it again. To do this, navigate to:
C:\Users\%username%\AppData\Local\Microsoft\OneNote\15.0
find the OneNoteOfflineCache.onecache file and rename it to OneNoteOfflineCache.old.
Then, restart OneNote to check the result.
Note: If you have changes in the cache file that have NOT been committed to the primary file you'll lose them if you delete the cache file.
In addition, we can also try to perform a Windows clean boot to troubleshoot if this issue is caused by software conflict. See:
http://support.microsoft.com/kb/929135
We would also continue to monitor on this issue and will let you know if this issue is caused by a recent update.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
How to opened the Query in WEB
Hello:
Now the <b>IGS</b> has ready, I can click the query in favority when login on bw by GUID. But I can not find the fuction to open the query in WEB. Is there other thing I didn't do? Hope someone can give me some advice.
Regards&Thanks!
zagoryhi Zagory,
not sure understand your question correctly...
you can open the query with bex analyzer,
with display/change the query, and there is button 'display query on the web' (after V and X button).
or you can create a web template and add web item 'table' or 'chart' and choose the query as data provider.
for web template that exist in favorite, when you click from sapgui after login, it will be executed on browser.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
hope this helps. -
Giving Error while opening BEx Query Designer.
Hi all,
A user is trying to open BEx Query Designer 7.0 and she is getting this error
" SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were middle of something, the information you are working on might be lost. "
She is not having issues while opening BEx Analyzer. She is having Office 2010. This doesn't seem to be compatibility issue with the Office. This BEx was not installed on her machine 2 weeks back and it was working fine until now.
As a first re-solution i told her to get it re-installed but still she is getting the same issue.
Thanx.Hello,
There is no relation between Office VS Query Designer. Only with BEx Analyzer and MS Excel.
My suggestion is.
If you don't have version 7.20 of SAPGUI and Business Explorer, please download the installer.
After that, download the latest patch available and install:
http://service.sap.com/swdc
> Support Packages and Patches
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Win32
_ > * gui720_5-10007878.exe
| > BI ADDON FOR SAP GUI
| > BI 7.0 ADDON FOR SAP GUI 7.20
|_ > * bi720sp03p_301-20006596.exe
|
| > BI ADDON FOR SAP GUI
| > BW 3.5 ADDON FOR SAP GUI 7.20
| > Win32
|_ > bw350gui720_5-20006857.exe
If persist, let me know.
Cheers
Edward John
Maybe you are looking for
-
Extracting a Photo and Printing through ABAP Report
Hi, How to extract a picture of an employee from PA30 or PA20. After extracting the picture how to print it in ABAP report. Waiting for help. Thanks in Advance with Regards. MAM
-
Error 83::8 (not enough memory to initialize PSL) when use layer styles in AEF
Hello! Have error in AEF CS6 when i try to use layer styles in AEF. Error is "not enough memory to initialize PSL 83::8" It works good if i start programm as Administrator. My PC is: Windows 7, Intel core 7 with 2.7 Ghz, 6 Gb RAM, Nvidia GeForce 240
-
IWork 09 Dinner Party Template
Bought iWork 09 yesterday and was building a Dinner party list with the understanding that after filling in my recipes, the template would total all my ingridients in the shopping list. But it doesn't do that. Is that how it is designed or am I missi
-
Having a gui in one class use a gui in another?
Hi everyone, I have created two separate classes for an employee program. My first class consists of a frame that adds a new employee to the program and my second class is the Main Program that is supposed to allow the user to choose what information
-
Hi am trying to use is digit on specific args to handle non numeric operands wilthout using exception handlers I have tried various ways but am having no luck and have not found any answers in the tutortials most recent attempt as follows: // Calcula