Anamorphic dimensions skewed when clips copied from one sequence to another

I'm in the process of editing a lengthy video documentary using footage captured on a Canon FS100 DV camera. I'm using the DV file format and set my project to NTSC DV Anamorphic (since I believe that to be the proper format based on the source video I'm working with).
In one specific sequence I'm working on, all of the video clips I'm using properly appear as anamorphic with an anamorphic Viewer and Canvas. However, other sequences (and I didn't notice this until many hours of work editing clips) appear to be in the 4:3 dimension format. The source anamorphic clips appear as anamorphic within the 4:3 in the Viewer and Canvas. The problem is that when I copy a clip from one of the 4:3 sequences to the working Anamorphic sequence, it resizes/skews the source video clip to look shorter and wider.
I have taken screen captures which I identify what I'm talking about though I don't see a way to include them in this post. I can email them to anyone who needs the visual to better understand my problem.
What have I done wrong? Is there any way to non-destructively re-dimension the sequences to an anamorphic format so I don't lose 20 hours of clip editing?
Thanks in advance for your help!
Mark

Thanks, Tom. You've helped me solve my problem -- and hours of editing.
Here are the procedures I followed:
1) Selected the anamorphic clip in the 4:3 sequence I wanted to copy to the anamorphic sequence. Keyboard shortcut: Command-C
2) Pasted the clip in the anamorphic sequence. Keyboard shortcut: Command-V
3) Selected the pasted clip and called up the 'Remove Attributes' pop-up. Keyboard shortcut: Command-Option-V
4) Made sure the Distort checkbox is checked. Clicked OK.
5) Voila!!!
Of course, this can be done with a group of clips. Another trick is to create a new sequence that is set up as desired (e.g. NTSC DV Anamorphic), copy the entire 4:3 sequence, paste it in the new sequence and then bulk remove the distort attribute.
Mark

Similar Messages

Easiest was to copy clips from one sequence to another?

Hi,
Instead of copy/paste is their a different, quicker way to move clips from one sequence to another?
Thanks

Hi Patrick, Your always ready to help
No that's not what I'm looking to do. (or maybe I just didn't understand what you wrote.)
What I mean is if I have 4 sequences open and I wanted to move a clip from sequence 2 to sequence 4. What I do now is copy the clip in sequence 2 and go to sequence 4 and paste it.
Is there a easier way?
Thanks
-marco

Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...

A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/

VOs are corrupted after copying from one machine to another

Hi all
I have a customer with the following problem:
A team of developers are creating custom pages on different PCs for the same project.
In order to have the latest BC4J objects for everyone, VOs (XML file and Impl.java and RowImpl.java) are copied from one machine to another and added to the project.
But when doing this and trying to view the attributes of the new VO on the machine where the new VO si copied over will result in an error:
java.lang.NullPointerException
at oracle.jbo.dt.ui.view.VOAttributePanel.getFieldType(VOAttributePanel.java:687)
at oracle.jbo.dt.ui.view.VOAttributePanel.actionPerformed(VOAttributePanel.java:851)
at javax.swing.JComboBox.fireActionEvent(JComboBox.java:1197)
at javax.swing.JComboBox.setSelectedItem(JComboBox.java:561)
at oracle.jbo.dt.ui.view.VOAttributePanel.setFieldType(VOAttributePanel.java:754)
at oracle.jbo.dt.ui.view.VOAttributePanel.updateControls(VOAttributePanel.java:393)
at oracle.jbo.dt.ui.view.VOAttributePanel.setAttribute(VOAttributePanel.java:642)
at oracle.jbo.dt.ui.view.VOAttributeTabPanel.updateControls(VOAttributeTabPanel.java:33)
at oracle.jbo.dt.ui.entity.EOAttributeTabPanel.setAttribute(EOAttributeTabPanel.java:143)
at oracle.jbo.dt.ui.view.VOEditAttributeTabPanel.attrValueChanged(VOEditAttributeTabPanel.java:301)
at oracle.jbo.dt.ui.view.VOEditAttributeTabPanel.enter(VOEditAttributeTabPanel.java:107)
at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:620)
at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:595)
at oracle.jbo.dt.ui.view.VOWizard.selectPage(VOWizard.java:243)
Please notice that source JDeveloper version and target JDeveloper version are the same and are coming from the same JDev OA patch.
The only workaround i could find is creating the VO from scratch on the 2nd installation, but this reduces very much the development time, because developers are doing the same work other developer had undertaken before, so there is no benefit from this.
I got exactely the same result when copying the VO on the same machine in 2 different JDev installations (with the same version of course).
I have a very simple reproducible testcase with OA Toolbox tutorial:
Requirements:
- Two (2) workstations
- Each workstation must contain same copy of JDeveloper project (JPR file)
- Toolbox Tutorial project
Steps:
Workstation 1
1. Go to Tutorial.jpr project -> Business Components -> oracle.apps.fnd.framework.toolbox.schema.server
2. Right click package then select New View Object.
3. Proceed with the creation of the View Object using wizard.
4. Name the View Object as CustomerSupportVO
5. Select EmployeeEO and AddressEO.
6. Select all possible attributes.
7. On Step 6 of wizard, check Generate Java File for View Row Implementation.
8. Click Finish.
9. Save Project.
10. Copy CustomerSupportVO.xml, CustomerSupportVOImpl.java, CustomerSupportVORowImpl.java to shared folder.
Workstation 2
1. Copy CustomerSupportVO.xml, CustomerSupportVOImpl.java, CustomerSupportVORowImpl.java from shared folder to Workstation2/JDEV_HOME/myprojects/oracle\apps\fnd\framework\toolbox\schema\server.
2. Go to Tutorial.jpr project -> Business Components -> oracle.apps.fnd.framework.toolbox.schema.server
3. In the System Navigator, click on Add to Tutorial.jpr icon.
4. Select CustomerSupportVO.xml then click Open.
5. Click ok when prompt to add View Object’s components.
6. Right Click on CustomerSupportVO from Business Components.
7. Select Edit CustomerSupportVO.
Can you let me know if there is a more simple workaround?
Thank you in advance,
Dan Cretu
EMEA ATG team

I had faced similar issue earlier. I just copied the VO query(and all necessary information) and removed it (deleted) from the project. Upon recreation of the new VO (same name) the issue was resolved.
Not very sure as to why the VO.xml got corrupted in your case, but this solution works.
Thanks

The float in windows option is grey and not accessable ? How can I copy from one image to another ? Elements 11

The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11

You really are not getting this.
"I guess I am still completely shocked that as a parent we can't download something for everyone to use."
Why do you continue to think this although we keep telling you that this is not the case.
You do NOT have to purchase anything twice. You can share the music with as many ipods as you like in your household.
The ipods are designed to sync with your computer regularly. You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
Take on of the ipods with the music in it. Open itunes on your computer. Plug in the ipod. Do not sync. Click File>Transfer Purchases This will transfer the purchases from the ipod to the computer. Make sure that you have authorized your account on the computer: here are directions for that. http://support.apple.com/kb/HT1420
Unplug the ipod.
Plug in the other ipod with purchased music. Do not sync. Click File>Transfer Purchases This will transfer purchases from the ipod to the computer.
You can now plug in any of the ipods, select what you want to sync and sync.
Have a look at the manual for the ipod. http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

How to copy from one Version to Another version with single click

Hi Everone,
Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
They don't want use standard COPY Data manager package to do this activity as this involves many steps.
Please let me know Is there any way to COPY with single click. Thanks in advance!!
Regards,
Viswanath

Hi Viswanath,
Use /CPMB/DEFAULT_FORMULAS
Then edit automatically created advanced script:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
Remove bold lines and change the script name in line with your script name:
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
Vadim

Why does Dynamic Type change to a fixed font size when copied from one Note to another Note in the Apple Notes App?

If I copy and paste text from one note to another, it pastes in at the current Dynamic Type size but is no longer adjustable. I have tons of notes with various fixed size text. Is there a way to reset all the text in the Apple Notes App to Dynamic Type so they can be adjusted using the font size slider in settings?

When you use IMAP, as opposed to "On my Mac," Notes will create a folder called "Notes" on the mail server. It will then store notes in there. If you create subfolders in Notes (which you can do), those will be stored as subfolders of Notes on the server.
So in the case of Gmail, you should be able to log onto your Gmail web account and the notes should probably show up in "All my Mail" with a label of Notes (this is because Gmail's IMAP implementation is VERY nonstandard and it doesn't actually support folders; it uses labels instead). If you view the Notes label in Gmail's web interface you should see all your notes.
Because of Gmail's IMAP implementation you should be very careful not to remove the "Notes" label from any of your notes if you're in the web interface, or they will disappear from the Notes app on OS X itself.

Getting error Can't read from the source or disk when moving documents from one folder to another folder in the library

Hi,
When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
Can read from the source file or disk.
The user having below permission for the Library as well as site.
Fullcontrol,Limited access--->Given directly
Read,Limited access--->Givin through the all Test grp
Contribute,Limited Access-->given through test members grp
Read,Limited access---> givin through The group grp
Could you please help me anyone....
Thanks

Hi Reddy,
If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Can security information be simply copied from one server to another?

Hi,
In WL6.1, we managed to set up a build and deploy system, with an RDBMS realm,
using ant. What we did is that we created a config.xml file, put it in our CVS
and modified it manually when needed. However, using this system, we always had
a one-step process for configuring and adding new information in our realm. Can
I expect to be able to do that with 8.1?
I'm not too clear on the entire JAAS principles involved and it does seem to be
more complex than in 6.1. We do a lot of automated testing and need a way to test
our security where we don't need to continually do manual labour.
My impression is that in our production environment, we will need to:
- Create a new server and domain manuall
- Configure the initial Realm manually
- After that, manual changes in our config.xml should be able to work correctly
Am I correct in my assessment? Or are there some peculiarites to the whole security
system that would prevent me to do what I want without a lot of manual intervention?
Thanks,
L

Hi KK,
Yes you can copy from one server to other server but make your that you change the restiry.xml file correctly.
1 what are the changes we need to do?
Major thing is you need change few path from following files.
from %BEA_Home%
-- .home
-- registry.xml
-- domain-registry.xml
Wlserver_103 folder
-- .home
--.product.properties
Majorly path changes from common / bin folder and server / bin folder in startup scripts.
-- Majorly you need maintain same folder structure for your Domain or BEA Home.
-- Thats it make your JDK are available on setted path.
Note when you copy directly in similar folder structure major issue will be solved out.
let me know if you need any further query on this issue.
Regards,
Kal

LOCAL Structure to be copied from one query to another query

Hello all,
In our query we have created a structure locally....
we have to copy the same locally created structure from one query to another query which is on the same multiprovider.
We do not want to make the structure global.
Can anyone suggest some method to achieve this!

For copiying structures fom query to another you have to do it global. After that you can do click on right button on the structure when added to your query and choose "eliminate reference" this does further changes in the structure were local for that query.

QM master Data copy from one client to another client

Hi QM guru...
Kindly suggest me how i will copy all qm master data from one client to another client
QM master Data like....Catlogs. MIC inspection method. sampling...etc
Kindly suggest me how i will copy all master data
Thanx
Regards
Akil

Dear Akil,
I think that LSMW can be of help in this case.
Otherwise, please check with your ABAPer whether any BDC is there for mass uploading of master data.
Regards,
Kaushik

G/L accounts to be copied from one client to another

Dear Gurus,
I would like to copy all or few G/L accounts from one client (000) to another client (800). Is it possible? If it is possible, can anybody explain how to do the same.
FYI - This question may not be relevant for SD, but i would like to carry out the above activity.
Regards
Manivannan R

Hi Prasanth,
Yes. We can work with CIN in two way. One way we can do it through copy client to a new client and another one is by creating all CIN related elements to an existing client (may be in 800).
Since i do not know, how to do the client copy, i am requesting how to transfer the G/L accounts from one clinet to another client.
If somebody knows how to do the client copy, please let us know.
Thank you in advance
Regards
Manivannan R

Error when cloning db from one machine to another

Hi people.
I am trying to clone a database from one machine to another. (both are linux x86_64 machines with 11g installed on both)
I obtained the following error after a few minutes into the process. Any workarounds for this?
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
RMAN-10041: Could not re-create polling channel context following failure.
RMAN-10024: error setting up for rpc polling
RMAN-10005: error opening cursor
RMAN-10002: ORACLE error: ORA-03114: not connected to ORACLE
RMAN-03002: failure of Duplicate Db command at 11/26/2013 23:05:42
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 9054
Session ID: 91 Serial number: 5

Likely the RDBMS Software version and/or Patchset level is not the same on the two servers.
Hemant K Chitale

How do I sync the "view size" when I copy clips from one sequence to another in FCE4?

My idea was to edit an advanced clip in a separate sequence (bad idea) and then copy it into the main sequence, but I ran into an obstacle.
For a clip to fit the window in Sequence 1 it is shown at 44%, while in sequence 2 it is enough with 22%. Problem is, when I copy a clip from sequence 2 to 1, it appears twice the size. How can I adjust this? The clip from sequence 2 becomes disproportionately big on the screen when copied to sequence 1.
Thank you for taking your time.

As Studio X pointed out, you open a huge can of worms when you work with sequences of different specifications, but try this -
once the clip has been pasted into the sequence, click on it on the timeline so that it is selected. Now Control-click on that clip, and from the drop down menu, choose Remove Attributes.
When the remove attributes pane opens, check the box for Basic Motion and Distort (if they are not grayed out) and click OK. This should reset the clip size.
If this is successful, you can do this to multiple clips all at once by selecting them, then clicking on any one of the selected clips and doing the above.
MtD

How do you copy from one itouch to another

We have three itouches for the kids. the oldest two have purchased songs, games etc. separately on each device. The newest itouch had nothing on it and is brand new. I believe that every application that we want on this third device has to be paid for separately. That is, even though one of the kids has an application on his itouch if the other kid wants the same application I have to buy it all over again for that device.
Someone at work told me that this is not necessarily the case because more than one device can share an itunes account. However, I have a couple of ipods we used to use (the cheaper ones without a screen) that we used to use. But when we tried to download songs from one device to the other you had to copy the whole hard drive from one device to the other. So anything you had on your device to start with would be completely overwritten and you'd loose whatever you had on the device just to get a song from the other device.
Is there any way you can avoid having to buy the same application for each itouch you have in a family? It would seem that there would be some sort of discount program or family license for stuff you downloaded. I understand that to do that would be less $$s in Apple's pocket but it seems that it doesn't make sense to have multiple devices in a family. Since the game everyone wants to play is on one itouch then the other ones are just sitting collecting dust. It's like haveing 3 TVs in the house but only one cable box. I wonder if Apple would make more $$s by giving away the itouch and just have everyone download apps like crazy. Sort of the same model as Razors - they give you the razor for free but you pay throught the nose for blades for the rest of your life.
Just wondering if there was a way to make the purchase of these Itouches worth while. We're sort of kicking ourselves for letting the kids each get their own itouch. Would have been much cheaper to just get one device and let them each buy applications with their gift cards. They fight over the itouch that has the most desireable game. Seems like the marketing of the whole itunes thing was not all that well thought out, at least not not for families with kids.
Thanks.

You really are not getting this.
"I guess I am still completely shocked that as a parent we can't download something for everyone to use."
Why do you continue to think this although we keep telling you that this is not the case.
You do NOT have to purchase anything twice. You can share the music with as many ipods as you like in your household.
The ipods are designed to sync with your computer regularly. You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
Take on of the ipods with the music in it. Open itunes on your computer. Plug in the ipod. Do not sync. Click File>Transfer Purchases This will transfer the purchases from the ipod to the computer. Make sure that you have authorized your account on the computer: here are directions for that. http://support.apple.com/kb/HT1420
Unplug the ipod.
Plug in the other ipod with purchased music. Do not sync. Click File>Transfer Purchases This will transfer purchases from the ipod to the computer.
You can now plug in any of the ipods, select what you want to sync and sync.
Have a look at the manual for the ipod. http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

Anamorphic dimensions skewed when clips copied from one sequence to another

Similar Messages

Maybe you are looking for