Anamorphic flag in FC for title item properties
I've been trying to figure out how to get my titles to be anamorphic. I shoot it widescrenn 16:9, so all my FCE sequences are set to that.
I noticed some people change their title project properties to have a 1.25 pixel aspect ratio and then import it to FCE and then select item properties and set an "anamorphic flag."
HOW do you do this? When I select project properties for my live type title I can see the properties but I can't change anything but the title of the file. Everything else is grayed out.
How do I flag a LT file in FC to be recognized as anamorphic in FCE?
I'm using FCE HD 3.5
In LiveType open the project properties with Command Zero. There will be a field for pixel aspect ratio. If this is greyed out there must be another issue. Is the file locked or in use by another application?
Similar Messages
-
ERS flag on PO for return item
I am missing the ERS flag on PO for "<b>return item</b>"
Hello,
Just now that material is where?
In your stock or at customer.
If that material is in your stock than you transfer that stock from storage location to storage location. thin can be within one plant or between two plants (If you have declared service center as storage location)use MVT type 301 With ref to this material document you have excise invoice thru J1IS.(If excise is applicable)You can edit excise values there.
Check and confirm
Regards
Kedar Kulkarni -
Is there a way to find out the localized labels for contact item properties?
Hi,
an Outlook ContactItem has a lot of properties (e.g. BusinessTelephoneNumber). I want to design a custom ribbon menu containing all business telephone numbers. And the labels of these menu items should display the localized field description (e.g. "Business
Telephone Number"). But I did not found any mapping of Contactitem property name and label being shown in die Outlook's user interface. Sure, I can code my own mapping but I would like to know whether there is a possibility to get a localized string for
labeling my own menu items.
Anything like ContactItem.ItemProperty(INDEX).GetLocalizedLabel() would be fine.
Any ideas?
Kind regards
MõbiusYou can also create collection for reboot pending machines based on its lastenforcementmessageID.
SELECT SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name,
SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup,
SMS_R_SYSTEM.Client FROM sms_r_system inner join SMS_UpdateComplianceStatus
ON SMS_UpdateComplianceStatus.machineid=sms_r_system.resourceid
WHERE SMS_UpdateComplianceStatus.LastEnforcementMessageID = 9
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
Processing for each item SDRQCR21 flag
Hello all,
What does mean the flag Processing for each item for ECC report SDRQCR21?
Thanks in advance.
Januario FariaPlease read sap note 998102.
Here the following is written:
"Important information:
o With the 'Processing per item' option, the collective
(summarized) requirements are no longer processed. Materials
which belong to an atp group which summarizes the requirements
are simply not checked for consistency." -
I've looked through the answers here and still can't figure out a clear direction.
I shot some HD video that shows as 1440 x 1080 in the Item Properties. I'm doing titles in Photoshop. What should my canvas size be? If I set the Photoshop document to 1440 x 1080 the proportion is different than what I see in FCE and the imported image is squashed. The exported size is 1920 x 1080 and that looks more the proportion of the FCE box when imported. Is that what I should set my canvas as in Photoshop?
Also what is the best format for the crispest type out of Photoshop? Tiff? PNG? JPG?
Thanks.Good to know. I think I'll use PNG so I can take advantage of the Save to Web dialog and not have to flatten my multi-layer file for every title/save.
-
Is is possible to query the mailbox and get a list of the items in a folder and get the properties for items in that folder?
Properties i'm looking for are things like creation date, modified date, retention tag, read/unread, folder, others fields.
ThanksWhen you run Search-Mailbox and export content of a mailbox it can generate the report with certain properties like listed below but not all the properties that a mail item has...
Mailbox,Folder,Subject,Read,Sent,Received,Sender Display Name,Sender Email Address,Importance,Sensitivity,Message
ID,Flag Complete Time, Flag Complete Date,Flag Request,Flag Status,Flag Subject,Is Flag Set For Recipient,Item Color,Task Status,Start Date,Due Date,Is Complete,Percent Complete,Is To Do Item,Categories
Check this thread for more details... http://social.technet.microsoft.com/Forums/exchange/en-US/c0039594-7c7b-4716-947e-f9828c041466/tracking-target-folder?forum=exchangesvradmin#a8afa62c-cfd9-47bd-b558-ea5fee221a39
Otherwise not that I know via Exchange Powershell but it might be easily possible via EWS programmatically, suggest you to post it in Development forum here... http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Web Item Properties cannot be displayed in WAD
Hi,
I cannot see the web item or template properties in the WAD. I have ticked the flag for the web item properties to be displayed.
This seems to be user specific, if I login as another user, the properties work area is visible and as well can be selected or deselected for display.
I am new to Web reporting so am not sure where to change the parameters to get back the properties work area for me.
Thanks and regards,
AWThanks a Lot guys,
Its really strange that the issue seems fixed on itself. Today I have logged into the system and found everything in order.
Now I can see the properties pane in WAD and as well select/deselect it from the toolbar.
It seems to be one more SAP mystery!!!!
Once again thanks a lot for your contributions. Have assigned points each one of them. -
Hi, I'm making a music video bound for the internet shooting on a DVX100B in PAL progressive (25fps) in squeeze mode (anamorphic).
Now in final cut pro I was wondering what the best settings were in the item properties tab. Also if I change the sequence item properties settings will it change all the clips I've used in that sequence (the stuff in the timeline) or will I have to change each clip individually in the timeline?
So the following settings are (for the sequence):
Vid rate: 25fps
Frame Size: 720x576
Compressor: DV PAL
Pixel Aspect: CCIR 601 (should I change this to square and if so why?)
Anamorphic: (no tick)
Field Dominance: Lower (Even) (Should I change this to none and if so why?)
Thanks for any advice on the following query. Any info at all on how and why I should change the above settings would be great. I'm also using compressor after this so could I make all these changes in compressor instead of in FCP, or is it best to change them here first as well?
Thanks again
KevKev,
Changing the sequence settings won't change clip properties.
Pixel Aspect: Don't change
ANamorphic: Do Tick
Field: Lower
Consider changing to Pro Res SD rather than DV.
I'd rather work with the correct settings in FCP so I could get reasonably accurate feedback on what I was editing. Export as QT Movie Current Settings. Bring into COmpressor as source file for a job/batch. Use Compressor to transcode. Start with one of the QT download presets and adjust bit rate and frame controls until you're satisfied.
Good luck.
Russ -
Full message that pops up
"The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod.
To authorize this computer for items purchased from iTunes Store, choose Store > Authorize This Computer."
I am unable to sync my music, applications, movies, etc. to my iPod touch. The only way I am able to bypass the message that pops out when I try to sync (the one in the title) is by clicking "Apply" instead of "Sync". To do this, I make changes to Apps, Music, or Movies (...) and the buttons "Revert" and "Apply" will replace the button "Sync".
My problem is most likely not due to using many accounts because I only have one and it is the only one that I use. I do not share accounts with my family members. Still, I have tried everything here, nothing has worked for me. Since I don't often listen to Podcasts, I have deleted them from my iPod. I have no idea why I am unable to sync and no one seems to have the same problem as me.
Thank you for your help in advance.
Details
iPod touch, 5th generation
iOS 8.1.2
iTunes 12.0.1.26
Windows 8
Purchases
Pre-ordered album "Froot" purchased from the account that is authorized to my computer
Podcast "Not Too Deep with Grace Helbig" also purchased from the account that is authorized to my computerTry backing up to iTunes and restoring from that backup
-
Guess that was a title.
My itnes says my iPhone5 can't be synced because the PC is no longer authorized for purchased items on my phone. It worked before Win-7 was reloaded.
I had deauthorized and reauthorized iTunes. Ideas?? - Thanks.I do have the same problem too. I don't know recently updated itunes to 11.1 and today I tried to install a free app and this message occurs no matter what I ve tried.
I dont want to perform a master reset to iPhone yet... hope apple will come up with a fix.
iPhone 4 / iOS 6.1.3 -
Hi iam trying to get the po line item latest changedby name to display in my report
can you give me the logic to get the changed by name for theline item.
i have written the code but if i change the line item 20 then in the out put the changedby name is being displayed for line itema 10 ,20, 30 i e for all line items .but i want the changeby name to be displayed only for the particular line item which was changed.
*& Report ZMR_PO_AUDIT_RPT *
*& Purpose - Report on PO release details for auditing. *
Program ID : ZMR_PO_AUDIT_RPT *
Title : Purchase Release Audit Report *
Create Date : 19.03.2007 *
Author : Marina Gosman (JH IT services) *
Tech. Spec : *
Change Req #: *
Changed by | Description of change | Date *
MarinaG | Change the report Heading to Purchase | *
| Order Action Audit Report R3DK912376 |23.03.07 *
MarinaG | Fix a select bug. R3DK912384 |23.03.07 *
MarinaG | Change report heading by removing fields |27.03.07 *
| R3DK912404 | *
MarinaG | Add exception checkbox which will only |3.04.07 *
| show the same GR, Released and Created | *
| username R3DK912444. | *
MarinaG | Add GR Value and Vendor Name FP#1919 |28.08.07 *
| R3DK912809 | *
MarinaG | Add line item no., display line items for |11.10.07 *
| GR period and GR date FP#1919 R3DK912960 | *
REPORT ZSAMPLE3 NO STANDARD PAGE HEADING LINE-SIZE 200
MESSAGE-ID zv.
Database Tables
TABLES: ekko,t16fd,cdhdr,cdpos,t000,lfa1,t024,ekbe,mkpf.
TYPE-POOLS slis.
Type Declaration
*TYPE-POOLS: kkblo.
Structures
DATA:BEGIN OF st_output,
ebeln LIKE ekko-ebeln,
batxt LIKE t161t-batxt,
banfn LIKE eban-banfn,
bukrs LIKE ekko-bukrs,
frggr LIKE ekko-frggr,
frgsx LIKE ekko-frgsx,
frgct LIKE t16fd-frgct,
udate LIKE cdhdr-udate,
utime like cdhdr-utime,
username LIKE cdhdr-username,
lifnr LIKE ekko-lifnr, " vendor
name1 LIKE lfa1-name1, " vendor name
ebelp LIKE ekpo-ebelp, " line no.
afnam LIKE ekpo-afnam, " requisitioner
netwr LIKE ekpo-netwr,
ekgrp LIKE ekko-ekgrp,
eknam LIKE t024-eknam,
ernam LIKE ekko-ernam,
grnam LIKE ekbe-ernam,
bedat LIKE ekko-bedat,
budat LIKE ekbe-budat,
belnr LIKE ekbe-belnr, "R3DK912960
dmbtr LIKE ekbe-dmbtr, "R3DK912960
Indira
cdate LIKE cdhdr-username,
Indira
END OF st_output.
Indra
DATA: l_ponum LIKE ekko-ebeln,
l_poline LIKE ekpo-ebelp.
DATA: BEGIN OF t_EKbe OCCURS 0,
ebeln LIKE EKbe-ebeln,
belnr LIKE EKbe-Belnr,
budat LIKE EKbe-Budat,
cputm LIKE EKbe-cputm,
END OF T_EKbe.
DATA: BEGIN OF T_mkpf OCCURS 0,
mblnr LIKE mkpf-mblnr,
usnam LIKE mkpf-usnam,
END OF T_mkpf.
Internal Tables
DATA: t_cdhdr LIKE cdhdr OCCURS 0 WITH HEADER LINE,
t_cdhdr1 LIKE cdhdr OCCURS 0 WITH HEADER LINE,
po_ekko LIKE ekko OCCURS 0 WITH HEADER LINE.
Indra
DATA: t_cdpos LIKE cdpos OCCURS 0 WITH HEADER LINE.
indra
DATA: BEGIN OF tbl_output OCCURS 0.
INCLUDE STRUCTURE st_output.
DATA: END OF tbl_output.
DATA: BEGIN OF tbl_ekpo OCCURS 0.
INCLUDE STRUCTURE ekpo.
DATA: END OF tbl_ekpo.
DATA: BEGIN OF tbl_ekbe OCCURS 0.
INCLUDE STRUCTURE ekbe.
DATA: END OF tbl_ekbe.
DATA: BEGIN OF t_ekko OCCURS 0,
ebeln TYPE ebeln,
ebelp TYPE ebelp, "R3DK912960
belnr TYPE MBLNR, "R3DK912960
bukrs TYPE bukrs,
bsart TYPE bsart,
bedat TYPE bedat,
budat TYPE budat,
ernam TYPE ernam,
grnam TYPE ernam,
dmbtr TYPE dmbtr, "R3DK912960
END OF t_ekko.
DATA: c_tcode(25) TYPE c.
DATA: st_fieldcat TYPE slis_fieldcat_alv.
DATA: tbl_fieldcat TYPE slis_t_fieldcat_alv.
DATA: st_event TYPE slis_alv_event.
DATA: tbl_events TYPE slis_t_event.
DATA: fieldname(30) TYPE c.
DATA: st_layout TYPE slis_layout_alv.
DATA: g_status TYPE slis_formname VALUE 'STANDARD01'.
DATA: g_user_command TYPE slis_formname VALUE 'USER_COMMAND'.
DATA: st_status TYPE slis_status.
DATA: tbl_status TYPE slis_status OCCURS 0 WITH HEADER LINE.
DATA: f_ebeln LIKE ekko-ebeln.
DATA: cursorfield LIKE ekko-ebeln.
DATA: ws_ebeln LIKE ekko-ebeln,
ws_netwr LIKE ekpo-netwr,
ws_ernam LIKE ekbe-ernam,
rs_selfield TYPE slis_selfield,
ws_dmbtr LIKE ekbe-dmbtr. "R3DK912809
RANGES: r_kunnr FOR vbak-kunnr OCCURS 0.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK title WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_bukrs FOR ekko-bukrs OBLIGATORY,
s_ekorg FOR ekko-ekorg OBLIGATORY,
s_ebeln FOR ekko-ebeln,
s_groups FOR ekko-ekgrp,
s_lifnr FOR ekko-lifnr,
s_bedat FOR ekko-bedat,
s_budat FOR ekbe-budat,
s_bsart FOR ekko-bsart.
SELECTION-SCREEN END OF BLOCK title .
SELECTION-SCREEN BEGIN OF BLOCK title2 WITH FRAME TITLE text-001.
PARAMETERS: p_gr AS CHECKBOX DEFAULT 'X',
p_excep AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK title2 .
*& AT SELECTION SCREEN
AT SELECTION-SCREEN.
IF NOT p_gr IS INITIAL.
IF s_budat IS INITIAL.
MESSAGE s000 WITH 'Please enter Goods Receipt Date.'.
STOP.
ENDIF.
ELSE.
IF s_bedat IS INITIAL.
MESSAGE s000 WITH 'Please enter Purch Doc Date.'.
STOP.
ENDIF.
ENDIF.
START-OF-SELECTION.
START-OF-SELECTION.
PERFORM select_data. " Select data
PERFORM sort_table.
PERFORM get_events. " Include header in display
PERFORM get_eventstatus. " Set the GUI status
PERFORM get_layout. " Define ALV Layout
PERFORM get_fieldcat. " Fill report fields
PERFORM create_report. " Write ALV format
AT LINE-SELECTION.
PERFORM user_command USING sy-ucomm
rs_selfield.
FORM user_command *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA: l_ta TYPE sy-tcode VALUE 'SLIS_DUMMY'.
CLEAR: f_ebeln.
CASE r_ucomm.
WHEN 'CF1'.
READ TABLE tbl_output INDEX rs_selfield-tabindex.
IF sy-subrc = 0.
f_ebeln = tbl_output-ebeln.
ENDIF.
SET PARAMETER ID 'BES' FIELD f_ebeln.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
Begin of R3DK912404
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
End of R3DK912404
WHEN 'OTHERS'.
ENDCASE.
ENDFORM. "user_command
FORM STANDARD_02 *
--> EXTAB *
FORM standard_01 USING extab TYPE slis_t_extab.
SET PF-STATUS 'STANDARD01' EXCLUDING extab .
ENDFORM. "standard_01
*& Form get_events
setup report headings
--> p1 text
<-- p2 text
FORM get_events.
CLEAR st_event.
st_event-name = 'TOP_OF_PAGE'.
st_event-form = 'PROCESS_TOP_OF_PAGE'.
APPEND st_event TO tbl_events.
ENDFORM. " get_events
FORM get_eventstatus *
FORM get_eventstatus.
CLEAR st_status.
st_status-callback_pf_status_set = 'STANDARD_01'.
APPEND st_status TO tbl_status.
ENDFORM. " get_eventstatus
*& Form get_layout
text
--> p1 text
<-- p2 text
FORM get_layout.
CLEAR st_layout.
st_layout-zebra = 'X'.
ENDFORM. " get_layout
*& Form get_fieldcat
text
--> p1 text
<-- p2 text
FORM get_fieldcat.
PERFORM write_fieldcat USING 'EBELN' 'TBL_OUTPUT' 'EKKO' 'X' 1 ' '.
PERFORM write_fieldcat USING 'BUKRS' 'TBL_OUTPUT' 'EKKO' 'X' 2 ' '.
Begin of R3DK912960
PERFORM write_fieldcat USING 'EBELP' 'TBL_OUTPUT' 'EKPO' 'X' 3 ' '.
End of R3DK912960
PERFORM write_fieldcat USING 'UDATE' 'TBL_OUTPUT' ' ' ' ' 4
'Doc. Date'.
PERFORM write_fieldcat USING 'UTIME' 'TBL_OUTPUT' ' ' ' ' 13
'Doc. Time'.
Begin of R3DK912960
PERFORM write_fieldcat USING 'BUDAT' 'TBL_OUTPUT' ' ' ' ' 5
'GR Date'.
End of R3DK912960
PERFORM write_fieldcat USING 'ERNAM' 'TBL_OUTPUT' ' ' ' ' 6
'Created By'.
PERFORM write_fieldcat USING 'USERNAME' 'TBL_OUTPUT' ' ' ' ' 7
'Released By'.
PERFORM write_fieldcat USING 'GRNAM' 'TBL_OUTPUT' ' ' ' ' 8
'Goods Receipted By'.
PERFORM write_fieldcat USING 'CDATE' 'TBL_OUTPUT' ' ' ' ' 9
'Changed By'.
PERFORM write_fieldcat USING 'NETWR' 'TBL_OUTPUT' ' ' ' ' 10
'Total Value'.
PERFORM write_fieldcat USING 'EKGRP' 'TBL_OUTPUT' 'EKKO' ' ' 11 ' '.
Begin of R3DK912809
PERFORM write_fieldcat USING 'DMBTR' 'TBL_OUTPUT' ' ' ' ' 12
'GR Value '.
PERFORM write_fieldcat USING 'NAME1' 'TBL_OUTPUT' ' ' ' ' 13
'Vendor Name'.
End of R3DK912809
ENDFORM. " get_fieldcat
FORM process_top_of_page *
FORM process_top_of_page.
SKIP.
ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF .
Begin of R3DK912376
WRITE:/ 'Report Name : PO Release Audit Report',
WRITE:/ 'Report Name : Purchase Order Actions Report',
End of R3DK912376
/ 'Run Date : ', sy-datum,
/ 'Run Time : ', sy-uzeit,
Begin of R3DK912404
/ 'Document Type : ', c_tcode,
End of R3DK912404
/ 'Company code : ', s_bukrs-low.
IF NOT s_bukrs-high IS INITIAL.
WRITE: 'To', s_bukrs-high.
ENDIF.
WRITE:/ 'Purch Org : ', s_ekorg-low.
IF NOT s_ekorg-high IS INITIAL.
WRITE: 'To', s_ekorg-high.
ENDIF.
Begin of R3DK912404
WRITE:/ 'Purchase Order : ', s_ebeln-low.
IF NOT s_ebeln-high IS INITIAL.
WRITE: 'To', s_ebeln-high.
ENDIF.
WRITE:/ 'Purchasing Grp : ', s_groups-low.
IF NOT s_groups-high IS INITIAL.
WRITE: 'To', s_groups-high.
ENDIF.
WRITE:/ 'Vendor : ', s_lifnr-low.
IF NOT s_lifnr-high IS INITIAL.
WRITE: 'To', s_lifnr-high.
ENDIF.
WRITE:/ 'Goods Receipt Date:', s_budat-low.
IF NOT s_budat-high IS INITIAL.
WRITE: 'To', s_budat-high.
ENDIF.
End of R3DK912404
WRITE:/ 'Purch Doc Date : ', s_bedat-low.
IF NOT s_bedat-high IS INITIAL.
WRITE: 'To', s_bedat-high.
ENDIF.
Begin of R3DK912404
WRITE:/ 'Purch Doc Type : ', s_bsart-low.
IF NOT s_bsart-high IS INITIAL.
WRITE: 'To', s_bsart-high.
ENDIF.
End of R3DK912404
ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
ENDFORM. " process_top_of_page
*& Form create_report
text
--> p1 text
<-- p2 text
FORM create_report.
SORT tbl_output BY ebeln ebelp.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_events = tbl_events
i_interface_check = ' '
i_callback_program = 'ZSAMPLE3'
i_callback_pf_status_set = g_status
i_callback_user_command = g_user_command
is_layout = st_layout
it_fieldcat = tbl_fieldcat
i_default = 'X'
i_save = 'X'
TABLES
t_outtab = tbl_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_report
*& Form select_data
select records for specified selections
--> p1 text
<-- p2 text
FORM select_data.
CLEAR: c_tcode, t_cdhdr, t_ekko, tbl_output.
REFRESH: t_cdhdr, t_ekko, tbl_output, tbl_fieldcat.
IF NOT p_gr IS INITIAL.
SELECT DISTINCT a~ebeln "R3DK912960
SELECT a~ebeln "R3DK912960
b~ebelp "R3DK912960
b~belnr
a~bukrs
a~bsart
a~bedat
b~budat
a~ernam
b~ernam
INTO TABLE t_ekko
FROM ekko AS a
INNER JOIN ekbe AS b
ON aebeln = bebeln
Begin of R3DK912384
AND b~bewtp = 'E'
AND b~bwart = '101'
End of R3DK912384
WHERE a~bukrs IN s_bukrs AND
a~ebeln IN s_ebeln AND
a~ekgrp IN s_groups AND
a~lifnr IN s_lifnr AND
a~bsart IN s_bsart AND
a~ekorg IN s_ekorg and
a~bedat IN s_bedat AND
b~budat IN s_budat AND
a~frgke = 'R'
ORDER BY aebeln bbudat DESCENDING.
Begin of R3DK912809 R3DK912960
DELETE ADJACENT DUPLICATES FROM T_EKKO COMPARING EBELN.
End of R3DK912809 R3DK912960
ELSE.
SELECT DISTINCT a~ebeln "R3DK912960
SELECT a~ebeln "R3DK912960
b~ebelp "R3DK912960
b~belnr
a~bukrs
a~bsart
a~bedat
b~budat
a~ernam
b~ernam
INTO TABLE t_ekko
FROM ekko AS a
LEFT JOIN ekbe AS b
ON aebeln = bebeln
Begin of R3DK912384
AND b~bewtp = 'E'
AND b~bwart = '101'
End of R3DK912384
WHERE a~bukrs IN s_bukrs AND
a~ebeln IN s_ebeln AND
a~ekgrp IN s_groups AND
a~lifnr IN s_lifnr AND
a~bsart IN s_bsart AND
a~ekorg IN s_ekorg AND
a~bedat IN s_bedat AND
a~frgke = 'R'
ORDER BY aebeln bbudat DESCENDING.
Begin of R3DK912809 R3DK912960
DELETE ADJACENT DUPLICATES FROM T_EKKO COMPARING EBELN.
End of R3DK912809 R3DK912960
ENDIF.
sort t_ekko by ebeln ebelp budat descending.
sivanew
delete adjacent duplicates from t_ekko comparing ebeln ebelp .
sivanew
IF sy-subrc EQ 0. "R3DK912809
IF NOT t_ekko[] IS INITIAL. "R3DK912809
PERFORM process_data.
Begin of R3DK912444
IF NOT p_excep IS INITIAL.
PERFORM get_exceptions.
ENDIF.
End of R3DK912444
ENDIF.
ENDFORM. " select_data
*& Form write_fieldcat
text
-->P_0190 field name, if the SAP name used desc will be
automatically get from SAP table
-->P_0191 Internale structure or table name
-->P_0192 SAP table for field description
-->P_0193 format
-->P_1 Position
-->P_0195 Custom Description
FORM write_fieldcat USING name tab st key pos desc.
st_fieldcat-fieldname = name.
st_fieldcat-tabname = tab.
st_fieldcat-ref_tabname = st.
st_fieldcat-key = key.
st_fieldcat-col_pos = pos.
st_fieldcat-seltext_m = desc.
IF pos = 12.
st_fieldcat-outputlen = 40.
ENDIF.
APPEND st_fieldcat TO tbl_fieldcat.
CLEAR st_fieldcat.
ENDFORM. " write_fieldcat
*& Form process_record
text
--> p1 text
<-- p2 text
FORM process_record.
DATA:l_ebeln LIKE ekko-ebeln.
LOOP AT t_cdhdr.
CLEAR: l_ebeln, ws_ebeln, ws_netwr, ws_ernam.
MOVE t_cdhdr-objectid TO l_ebeln.
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = l_ebeln
IMPORTING
po_ekko = po_ekko.
Begin of R3DK912809 R3DK912960
SELECT SUM( dmbtr ) INTO ws_dmbtr
FROM ekbe WHERE ebeln = l_ebeln
AND vgabe = '1'
AND bewtp = 'E'
GROUP BY ebeln.
ENDSELECT.
End of R3DK912809
SELECT SINGLE dmbtr INTO t_ekko-dmbtr
FROM ekbe WHERE ebeln = t_ekko-ebeln
AND ebelp = t_ekko-ebelp
AND belnr = t_ekko-belnr
AND vgabe = '1'
AND bewtp = 'E'.
MODIFY T_EKKO.
End of R3DK912960
SELECT SINGLE ernam INTO t_ekko-grnam
FROM ekbe WHERE ebeln = t_ekko-ebeln
AND ebelp = t_ekko-ebelp
AND ELIKZ = 'X'.
MODIFY T_EKKO.
SELECT ebeln SUM( netwr ) INTO (ws_ebeln, ws_netwr)
FROM ekpo WHERE ebeln = l_ebeln R3DK912960
FROM ekpo WHERE ebeln = t_ekko-ebeln "R3DK912960
GROUP by ebeln.
ENDSELECT.
IF sy-subrc EQ 0.
IF s_groups IS INITIAL.
PERFORM build_output.
ELSE.
IF po_ekko-ekgrp IN s_groups.
PERFORM build_output.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " process_record
*& Form get_customer
Get Customers if sales office specified
--> p1 text
<-- p2 text
*& Form build_output
text
--> p1 text
<-- p2 text
FORM build_output.
DATA: l_line LIKE ekpo-ebelp.
DATA: l_requisitioner LIKE ekpo-afnam.
IF po_ekko-frgke = 'R'.
CLEAR: tbl_output.
tbl_output-udate = t_cdhdr-udate.
tbl_output-utime = t_cdhdr-utime.
tbl_output-username = t_cdhdr-username.
tbl_output-ebeln = po_ekko-ebeln.
tbl_output-bukrs = po_ekko-bukrs.
tbl_output-lifnr = po_ekko-lifnr.
tbl_output-name1 = ' '.
tbl_output-lifnr = po_ekko-lifnr.
tbl_output-ekgrp = po_ekko-ekgrp.
tbl_output-ernam = po_ekko-ernam.
tbl_output-ernam = t_ekko-ernam.
tbl_output-budat = t_ekko-budat.
tbl_output-grnam = t_ekko-grnam.
tbl_output-bedat = t_ekko-bedat.
tbl_output-dmbtr = t_ekko-dmbtr. "R3DK912809
tbl_output-ebelp = t_ekko-ebelp.
SORT T_CDHDR1.
sivanew
read table t_cdhdr1 with key
objectid = t_cdhdr-objectid binary search.
if sy-subrc = 0.
tbl_output-cdate = t_cdhdr1-username.
endif.
read table t_cdhdr1 with key
tcode = 'ME22N' binary search.
if sy-subrc = 0.
SELECT * FROM cdpos INTO TABLE t_cdpos
WHERE objectid = t_cdhdr1-objectid AND
objectclas = 'EINKBELEG' AND
changenr = t_cdhdr1-changenr.
IF sy-subrc = 0.
l_ponum = t_cdpos-tabkey+3(10).
l_poline = t_cdpos-tabkey+13(6).
ENDIF.
ENDIF.
IF tbl_output-ebeln = l_ponum AND tbl_output-ebelp = l_poline.
READ TABLE t_cdhdr1 WITH KEY changenr = t_cdpos-changenr
tcode = 'ME22N' BINARY SEARCH.
IF sy-subrc = 0.
tbl_output-cdate = t_cdhdr1-username.
ENDIF.
ENDIF.
ENDIF.
select ebeln belnr budat cputm from ekbe into table t_ekbe
where vgabe = '1' and
ebeln = t_cdhdr-objectid.
sort t_ekbe by budat descending cputm descending.
delete adjacent duplicates from t_ekbe comparing ebeln.
loop at t_ekbe.
select mblnr usnam from mkpf into table t_mkpf
where mblnr = t_ekbe-belnr.
if sy-subrc = 0.
read table t_mkpf with key
mblnr = t_ekbe-belnr binary search.
move t_mkpf-usnam to tbl_output-grnam.
endif.
endloop.
Indra
Get the user changed the record
IF t_cdhdr-tcode = 'ME22N'.
SELECT * FROM cdpos INTO TABLE t_cdpos
WHERE objectid = t_cdhdr-objectid AND
objectclas = 'EINKBELEG' AND
changenr = t_cdhdr-changenr.
IF sy-subrc = 0.
l_ponum = t_cdpos-tabkey+3(10).
l_poline = t_cdpos-tabkey+13(6).
ENDIF.
ENDIF.
indra
Display creator or changer
IF tbl_output-ebeln = l_ponum AND tbl_output-ebelp = l_poline.
READ TABLE t_cdhdr WITH KEY changenr = t_cdpos-changenr
tcode = 'ME22N' BINARY SEARCH.
IF sy-subrc = 0.
tbl_output-cdate = t_cdhdr-username.
ENDIF.
ENDIF.
Indra
SELECT SINGLE * FROM t024
WHERE ekgrp = po_ekko-ekgrp.
IF sy-subrc EQ 0.
tbl_output-eknam = t024-eknam.
ENDIF.
tbl_output-netwr = ws_netwr.
SELECT SINGLE name1 FROM lfa1
INTO tbl_output-name1
WHERE lifnr = po_ekko-lifnr.
Get Document descriptions
SELECT SINGLE batxt FROM t161t
INTO tbl_output-batxt
WHERE spras = 'E' AND
bsart = po_ekko-bsart AND
bstyp = po_ekko-bstyp.
Get Release code descriptions
SELECT SINGLE frgct FROM t16fd
INTO tbl_output-frgct
WHERE spras = 'E' AND
frggr = po_ekko-frggr AND
frgco = po_ekko-frgsx.
APPEND tbl_output.
ENDIF.
ENDFORM. " build_output
*& Form SORT_TABLE
text
--> p1 text
<-- p2 text
FORM sort_table.
SORT tbl_output BY ebeln ebelp ascending udate utime DESCENDING.
SORT tbl_output BY ebeln ascending udate utime DESCENDING.
delete adjacent duplicates from tbl_output comparing ebeln ebelp .
ENDFORM. " SORT_TABLE
*& Form PROCESS_DATA
text
--> p1 text
<-- p2 text
FORM process_data.
LOOP AT t_ekko.
c_tcode = 'Purchase Orders'.
SELECT * FROM cdhdr UP TO 1 ROWS INTO TABLE t_cdhdr "R3DK912960
SELECT * FROM cdhdr into table t_cdhdr
WHERE objectclas = 'EINKBELEG' AND
objectid = t_ekko-ebeln AND
tcode = 'ME28'.
SORT T_CDHDR BY UDATE DESCENDING UTIME DESCENDING.
delete adjacent duplicates from t_cdhdr comparing objectid.
siva
SELECT * FROM cdhdr UP TO 1 ROWS INTO TABLE t_cdhdr1
*"R3DK912960
SELECT * FROM cdhdr INTO TABLE t_cdhdr1
WHERE objectclas = 'EINKBELEG' AND
objectid = t_ekko-ebeln AND
tcode = 'ME22N'.
SORT T_CDHDR1 BY UDATE descending UTIME DESCENDING.
delete adjacent duplicates from t_cdhdr1 comparing objectid.
sivanew
if c_tcode = 'ME22N'.
SELECT * FROM cdpos INTO TABLE t_cdpos
WHERE objectid = t_cdhdr1-objectid AND
objectclas = 'EINKBELEG' AND
changenr = t_cdhdr1-changenr.
IF sy-subrc = 0.
l_ponum = t_cdpos-tabkey+3(10).
l_poline = t_cdpos-tabkey+13(6).
ENDIF.
ENDIF.
*sivanew
IF sy-subrc = 0.
delete adjacent duplicates from t_cdhdr comparing objectid.
PERFORM process_record. " process each document
ENDIF.
ENDLOOP.
ENDFORM. " PROCESS_DATA
*& Form get_exceptions
text
--> p1 text
<-- p2 text
form get_exceptions.
Display a report which shows the same released, goods receipted and
created by user
LOOP AT tbl_output.
IF tbl_output-username <> tbl_output-ernam OR
tbl_output-ernam <> tbl_output-grnam.
DELETE tbl_output.
ENDIF.
ENDLOOP.
endform. " get_exceptionsHi,
first of all you should read the following thread ABAP Development It is really hard to read code without proper formatting.
It looks like you use change documents to get user name for last change. For each document you use last change document and hence you have same name for every item. I am not sure if it is possible (it should be) but for each item you need to look for last change document corresponding to this item.
Cheers -
Delivery Complete Flag in PO for Services
Hi,
For a Material or text PO when I make the GR for the total quantity, I get for that PO the flag in field Deliveri Complete for the item.
This Flag doesn't exist when I use Item Category D - Services.
Can I've this flag for this Item Category also?
If not, how can I regard the Item for the PO as closed?
I know that when i create the service entry sheet in ML81N i can check button Final Entry and than Accept the SES.
Regards,
BMMO.Hi
For Services PO, we have activate at the Services Entry Sheet using below path:
Services Entry sheet > Menu Entry Sheet> Set Status> Final Entry (Click).
Once this Final entry icon is active, it is like short closing of balance open quantity.
regards
Prasanna -
PR Price Adopted to PO for service item
We are using idocs which uses BAPI_PO_CREATE1 to load the legacy PO's into ECC. Even though we supply the PO Price which is different than the PR Price for service item, the price is still adopted from PR which we don't want. I checked ML91 and there is a flag which is "Ignore Requisition Price in PO", but for online process, PR price must be adopted to PO for service item. Any Ideas if something can be done with configuration or any enhancements I have to look at.
Hi,
As you needed, use t.code OMET & define functional authorization, choose u201CAdopt PO Priceu201D and u201CRef. to Purchase Requisition" & save. Now in t.code SU01 assign your user ID with parameter ID EFB.& save. Now create PR & then create PO wrt PR, see the valuation price of PR will be taken to PO automatically.
Regards,
Biju K -
"Cost Rollup - No Report" not updating costs for some items.
Hi ,
We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
"Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
Thanks in advance,
Pavan.Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam. -
Searching for calendar items older than a specific date with search-mailbox and AQS
I need to find the total size of all calendar items in a mailbox older than a specified date using PowerShell through the search-mailbox cmdlet's searchquery parameter. My problem is that I cannot find a complete list of Calendar item properties to
use in search queries. The AQS page doesn't have a complete list of properties for a Calendar object.
I'm using code from the ArchiveStatisticsPlanner.ps1 script as a base and the only date properties I know of are the sent and receive properties (see below.) The basic start, end, date properties generate errors in the query. How can I find all
Calendar items older than say, 1/1/2013?
Sample:
$MBXSearch=Search-Mailbox-Identity$MBX-SearchQuery"kind:calendar
sent:<=$QueryDate OR kind:calendar received:<=$QueryDate"-EstimateResultOnly-DoNotIncludeArchivehuh, you a get response marked as answer that wasn't very helpful.
EDIT: and now I'm reported as abusive. Please don't tell the truth on these forums, it seems to be frowned upon
I did that.
If you're going to necro an answered thread and attempt to hijack it, you should have an actual answer that you feel is more relevant.
All you did was complain and add zero useful information, thus earning an 'offtopic/irrelevant' notation.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)
Maybe you are looking for
-
Installation hangs at 72% during Weblogic server 9.2 installation
I had already Weblogic portal server in my machine working fine. 3 days back when I opened workshop, it said "Could not create Java Virtual Machine" and was not starting. After that I reduced xms and xmx values in workshop.ini file and it worked but
-
How to use powerdvd discs on iMac?
Have disc employing PowerDVD format that I want to edit and copy. IMac says it doesn't recognize it. How can I get it to work on my Imac? Tried to get a PowerDVD free software download but got only bogus offers.
-
Hi, Is there a way to recognize that the invoice being committed from OracleDocument Capture(ODC) is a duplicate invoice ie it has already been committed earlier. Regards Shashwat
-
Revision: 12783 Revision: 12783 Author: [email protected] Date: 2009-12-10 06:42:14 -0800 (Thu, 10 Dec 2009) Log Message: Optimizations around subtopic handling in MessageService/ActionscriptAdapter, now we avoid calling Subtopic constructor (w
-
My ipad2 (13 months old), as been crashing (goes blank, than 10 seconds later le apple logo appears) every 1 or 2 minutes or so. Also my battery indicator is frozen, keeps showing the same number. I've plug it into the wall to recharge, and even when