Anamorphic sequence not producing anamorphic export

when I am doing some quick and dirty editing and correction, I use the method of cutting in FCP, then exporting that to a quicktime movie...I make the movie self-contained and select "Current Settings" in the Save box you get right after selecting Export>Quicktime movie.
I can then toss the original, large clip and work with the smaller one. I've done this loads of times and it's worked great, except for this evening. The exported clip doesn't come back in as anamorphic, even tho I captured as anamorphic, my editing sequence is anamorphic, so I'd hope that "Current Settings" would include the anamorphic setting.
when I pull that exported movie back into a Duplicated of the sequence from which I exported (clips deleted, of course) I get that squashed picture with black at right and left.
I've retraced my steps a few times and other movies I've done this with turn out OK...I don't get why this one is not able to be re-imported with the proper aspect ratio.
Any hints?
Thank you!
R

RaySkater wrote:
when I pull that exported movie back into a Duplicated of the sequence from which I exported (clips deleted, of course) I get that squashed picture with black at right and left.
I've retraced my steps a few times and other movies I've done this with turn out OK...I don't get why this one is not able to be re-imported with the proper aspect ratio.
What version of FCP are we talking here?
This might not relate to your situation but there are situations where I've found when using FCP 6 (up to and including 6.0.2, at least) where if a DV-NTSC Anamorphic sequence doesn't contain renderable material - ie, you've just made cuts and that's it, no render files to reference or export with - exporting that sequence (as Current Settings) results in a 4:3 ratio QT movie. That is, I opened up the QT movie and it showed 640x480 as the display size.
Sorry if that's no help, but I was banging my head against a wall until I 'discovered' this issue a month or two ago...

Similar Messages

The sequence does not show when exporting media from premiere

hi
i have the following setting for my sequence-
editing mode- main concept bluray
time base-25.00
preview file format -mpeg bd 1080 50i vbr 34 mbps
width 1920
height- 1080
maximum render quality
issue is when i export media the adobe media encoder does not show the sequence
and when i export in some other format- it only shows h.264 option and not h.264 bluray. as a consequence cannot write any bluray since all the option are progressive
do i need to reinstall something/anything
issue with mainconcept?
is there a tab where one can add presets in media encoder?
thanks

If you installed AME through the Creative Cloud, then this is a known issue which was fixed in an update released just a couple of days ago. To get this update, select Updates in the Help menu.
If you're not on Creative Cloud, then please specify which product or suite you installed that included AME, and also indicate whether it's activated or running in trial mode.

HDV Sequence gets squashed when exporting to quicktime

hi,can anyone help here . .
my current edit has HDV and DV on it and I am wondeirng of anyone has any tips when editing with these formats in the sequence.
I have two questions.
1. the dv footage looks half the size in the canvas as the hdv footage.
I have made it bigger by double clipping on each clip and using the scale parameter under motion tab to increase it to 200% and that filled out the window.
Will that effect output quality? is there another way to do it? Am I losing quality here? Is there a way round this . .
2. When i export my project as is - after rendering to quicktime - and import it into iDVD (i dont know how to use studio) the programme looks all squashed. (e.g a plant pot looks longer and thinner than it does originally)
Actually even on the quicktime movie after export it looks squashed
my HDV sequence settings are
Framesize 1440x1080 aspect ratio HD(1440x1080) (16:9)
compressor HDV 1080i50
the anamorphic box is not ticked, i tried making a dvd with it ticked but it still looked squashed when i compare a frozen image on the DVD with a frozen image in my sequence.
how to I get mt QT movie or reference file to look like it does on the timeline and not squashed as it is loooking now?
thanks in advance
C.H
G5, 4 x 2.5 ghz , 2.5gb ram Mac OS X (10.4.7)

"1. the dv footage looks half the size in the canvas as the hdv footage.
I have made it bigger by double clipping on each clip and using the scale parameter under motion tab to increase it to 200% and that filled out the window.
Will that effect output quality? is there another way to do it? Am I losing quality here? Is there a way round this . . "
You would be better (assuming a DVD is the only end use for this project) to scale to the lowest common denominator in this case DV.
Do your edit on a DV/NTSC/PAL timeline as appropriate and recapture the HDV material using the cameras built in HDV to DV conversion then you are working completely within a DV timeline scaled at 100% no need to blow footage up.
I am assuming the footage is a fairly equal mix of HDV DV if its just a couple of DV clips then you could go with it but obviously scaling footage up to HDV then down to SD for DVD will not produce the sharpest image.

Help!!! Premiere Proc CC will not let me Export!?!?!?!

Helo,
I have Creative Cloud for my Pc. I downloaded Premiere Pro CC onto my Pc. I had made a video, and exported it already. When I was going through the video again I found a mistake, so I deleted that video, went into Primere Pro CC and fixed the mistake. But now, Premiere Pro CC will not let me export the video?!?! It lets me click on the export, but it wont let me click on media, or any other options except forBatch List, AAF, and Final Cut Pro XML.
Also, in my apps section od Creative Cloud, it says that Premiere Pro CC has an update and that it has "Bug Fixes"... When I go to update it, it says that the update failed because it cannot locate the files?!?!
Thank you for your help!

Be sure the sequence is highlighted before trying to export.
Not sure on the update.

Nested Sequences Not Rendering

Hi, I am using Premiere Pro 4.2.1. I have a problem where I have applied a dip to black transition across multiple clips in a sequence, then I put that sequence in a new sequence to apply some colour correction, however whenever I render the new sequence the transitions do not work. If I render them in the original sequence then they do. Has anyone else come across this?
Thanks
Paul.

Sorry I should have mentioned, that the transitions also do not appear when exporting the second sequence to AME for the final output.

ARE1 creation error - "excise Invoice is not meant for Exports"

Hello Experts
We are working on ECC 6.0.
We were so far dealing with domestic sales and now have to start with exports (ARE1)
I've gone through many threads and all major configuration has been done according to J91 Block Builder. But I still have doubts.
1. While doing billing for export sales, when should excise invoice be generated. When generated then should it posted with accounting entry?
2. We've created a Running Bond & on test basis we have done billing and excise invoice (DLFC) has been generated along with billing.
But when we try to create ARE1 (J1IA101) with reference to above Official excise invoice, we get the message 4F242 ( 00090006 / 2008 excise invoice is not meant for exports). We've noticed in table J_1IEXCHDR for the above excise 90006 that the field Export Type is blank which should otherwise be B (Export under Bond). We have updated manually in the table as B to test and we are able to move ahead.
3. If we dont generate the excise with billing and try to do it in J1IIN, under utilisation even after changing the type from Local to Export only DEEMED Exports is highlighted in blue and could not be turned to BOND type.
Please suggest.
Kapil

Dear Kapil
when should excise invoice be generated
Once you generate delivery related (document type F8) proforma or commercial invoice, you should generate excise invoice
When generated then should it posted with accounting entry?
No excise entries should not be posted to accounting for export sales
excise invoice is not meant for exports
First ensure that you have a separate series group for exports.
Next in case of your Excise Invoice Type dont have any of the following, then system will throw that error
- Deemed export
- Export under bond
- Export without bond
- Export under Letter of Undertaking
Check whether the excise invoice type is generated with any of the above
thanks
G. Lakshmipathi

Excise invoice is not meant for exports. Message no. 4F242

Hi All
As per my Client Requirement i need to do export sales from specific Plant(Depot). which is used for only export sales.
i created STO and then i did Delivery and Billing (JEX) and created Excise invoice with refrence to Billing Doc
while Creating ARE - 1 document through T.Code J1IA101 it thronging ERROR
0020000023/2008 excise invoice is not meant for exports
Please give me u r suggestions
Thanks in Advance
Madhu

Dear Madhu,
As per your thread system is telling that invoice is not relevant for the exports so,
Please check the Excise invoice which you created is it relevant for expotrs or relevant for STO billing i.e domestic.
I hope it will help you,
Regards,
Murali.

Hyperlinks do not work when exporting to PDF (Crystal and Visual Cut)

I have a question about Crystal Reports XI Release 2 and Visual Cut 11. I create reports in Crystal and export them using Visual Cut. Some reports contain hyperlinks to files on a network drive. However, the links only work while in Crystal. The PDF files that are printed through Visual Cut display the links, but they are not clickable. How can this issue be fixed?
In case it helps, the links also work when I export reports from Crystal to HTML, Word, and Excel, but not when I export to Acrobat. I believe it is a problem with tagging/accessibilityfeatures. So is there a setting/formula in Crystal or Visual Cut that would allow the exported PDF files to be accessible?

While Crystal exports to pdf indeed lose hyperlink functionality (both in Crystal as well as in Visual CUT), Visual CUT allows you to use Crystal formulas (acting as hidden Tags) to create hyperlinks in the resulting pdf file. Another option supported by Visual CUT it to automatically detect file references in the pdf text and turn them into hyperlinks. Contact MilletSoftware for more detail.
Edited by: Ido Millet on Oct 27, 2010 5:11 PM

Not able to export web analysis report to excel smart view from workspace

Not able to export web analysis report to excel smart view from workspace.
Error :Web launch operation has been cancelled.
Can anyone help me to resolve this issues

I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
@Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

Crystal report not able to export in EXCEL file in windows 7

Hi Expert,
I have an Form, in which there is a button print. when I press Print button Crystal report open with data. upto here is fine with any operating system (OS).
When I press Export report in XP it working fine, ShowDialog is show on screen where I have to save this file. but When I run as application on windows 7 I got below as error
Current thread must be set to single thread apartment (STA) mode before OLE calls can be made .......
rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptView.ReportSource = rptDoc
            rptView.Show()
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = False
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer"
            oFrm.ResumeLayout(False)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
Can you please tell me why is I am not able to export report on windows 7 thru Crystal report
Thanks
Kevin

Hi Kevin,
You may check: Error in Export to PDF for crystal reports
Thanks,
Gordon

Crystal Report (visual studio 2005)-Hyperlink not working on exported PDF

I have created a crystal report by using VS 2005, there are some hyperlinks inside the report.
After i exported the report to PDF, I check the PDF file, none of the link contains inside the PDF file.
It seems a bug, i google this issue, some people can export to RTF first and then in RTF save as PDF, then the link should be there. I tried it, it works, but it totally mess up my report layout.
Please advise,
Tommy

Typing the terms "pdf export hyperlink crystal" in the search box at the top right corner of this page comes up with the following KB (5th hit):
[Hyperlinks to files do not work when exported to Portable Document Format (PDF)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333633363337%7D.do].
"Messed" up report export to RTF does not tell me much either. A link to a screenshot will be great.
Also, what CR Service Pack are you on?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

ARE1 Error ''000005/2009 Excise Invoice is not meant for Export"

I am working on ECC6 version of sap i am trying to create the ARE1 but it give the error as '0000500001/2007 excise
invoice is not meant for export'.I am trying to debug the program i thing the sy-msg type it catch that is e thats y it
goes to other loop pls help me out .

Dear Sarthak,
I have already maintained the number range object earlier, Still i verified it and number range object is present.
The error is not due to this Number range object.
The error is still there, Pls help.
Regads,
Arunava Sahana

0000000003/2007 excise invoice is not meant for exports.

WHEN IAM CREAING ARE 1 IA M GETTING THIS ERROR
0000000003/2007 excise invoice is not meant for exports.
Message no. 4F242

Hi murali,
Do you got any solution to your problem
if you got kindly inform me
cheers
bvdv

"Excise Invoice is not meant for Exports".

Dear All,
I am facing a problem while creating ARE1 for Export Sales.
At the time of creation (Tcode - J1IA101), when i am giving the outgoing excise invoice number, in the given field, system is saying that "Excise Invoice is not meant for Exports".
Whereas I have maintained seperate Series Group for Domestic as well as Exports.I have checked No.ranges as well, where I have found that, the Outgoing Excise invoice number is also maintained in the Number range Objects for Exports.
Can anybody suggest how to resolve the issue.
Rgds,
Indrajit

1.Check the Series Group is Maintained for Domestic and Exports
2. Maintain the number range in T.Code SNUM - Object "J_1IEXCEXP"
3.Ensure that the excise invoice number you referred is created for an export billing document.
4.Then go to J1IIN, check on the utilisation screen whether invoice type has been changed from Local to the respective export excise invoice.
5. Maintain the Bond with T.code J1IBN01 respective Plant and the Value with from to date
6. Cretae the ARE 1 through T.code J11A101 check the Excise Invoice No and the Amount
7. Check the Excise duty(BED) , E cess and Hr Edu Cess value is apperaing if not you have apply the Snote .
thanks
MJP Michael Joseph

SQL 2012 SP1 - How to determine a query that causes Error 8623 in SQL Log: The query processor ran out of internal resources and could not produce a query plan. This is a rare event...

We are getting multiple 8623 Errors in SQL Log while running Vendor's software.
How can you catch which Query causes the error?
I tried to catch it using SQL Profiler Trace but it doesn't show which Query/Sp is the one causing an error.
I also tried to use Extended Event session to catch it, but it doesn't create any output either.
Error:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that
reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Extended Event Session that I used;
CREATE EVENT SESSION
overly_complex_queries
ON SERVER
ADD EVENT sqlserver.error_reported
ACTION (sqlserver.sql_text, sqlserver.tsql_stack, sqlserver.database_id, sqlserver.username)
WHERE ([severity] = 16
AND [error_number] = 8623)
ADD TARGET package0.asynchronous_file_target
(SET filename = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xel' ,
metadatafile = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xem',
max_file_size = 10,
max_rollover_files = 5)
WITH (MAX_DISPATCH_LATENCY = 5SECONDS)
GO
-- Start the session
ALTER EVENT SESSION overly_complex_queries
ON SERVER STATE = START
GO
It creates only .xel file, but not .xem
Any help/advice is greatly appreciated

Hi VK_DBA,
According to your error message, about which query statement may fail with error message 8623, as other post, you can use trace flag 4102 & 4118 for overcoming this error. Another way is looking for queries with very long IN lists, a large number of
UNIONs, or a large number of nested sub-queries. These are the most common causes of this particular error message.
The error 8623 occurs when attempting to select records through a query with a large number of entries in the "IN" clause (> 10,000). For avoiding this error, I suggest that you could apply the latest Cumulative Updates media for SQL Server 2012 Service
Pack 1, then simplify the query. You may try divide and conquer approach to get part of the query working (as temp table) and then add extra joins / conditions. Or You could try to run the query using the hint option (force order), option (hash join), option
(merge join) with a plan guide.
For more information about error 8623, you can review the following article.
http://blogs.technet.com/b/mdegre/archive/2012/03/13/8623-the-query-processor-ran-out-of-internal-resources-and-could-not-produce-a-query-plan.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Anamorphic sequence not producing anamorphic export

Similar Messages

Maybe you are looking for