Anamorphic setting and chapters lost during export

Hi, I know "not another anamorphic thread"... but I cant find my solution anywhere so any help would be much appreciated.
Ok let me explain what happend from start to finish. Recently I have been capturing anamorphic SD footage off of DV tapes using FCP 6.0.6. Everything was working smoothly. I would capture, then I would edit and add markers then export to QT movie. I would then take the edited anamorphic footage into DVDSP 4.2.1. DVDSP would recognize it as anamorphic and I would burn my wide screen dvd with chapters in place.
However I had to randomly capture a VHS last week and ever since everything has not been working as it did before.
Now what happens is this: I capture the the SD anamorphic footage off the DV tape. The capture works correctly, the capture is anamorphic. Then I bring that correct footage into FCP do my editing and add chapters and export using QT movie. The exported footage appears not anamorphic and squished (skinny). If I try to bring that export into DVDSP the program recognizes it as 4:3 squished and my chapters are missing.
What the heck is going on????
All my settings appear correct. I am selecting "Current settings" and "chapter markers" on export. I have even manually selected "anamorphic" on export. Nothing works. I literally have hundreds of SD anamorphic DV tapes to put on DVD and this hiccup is driving me crazy. I have trashed the preferences, trashed the project. Started fresh several time and NOTHING has helped.
Thanks

@joey848
The method you describe is a work around that I have been using, but it still does not address why the work flow has changed. My FCP markers always worked in DVDSP until I transferred that VHS. They always worked, I have a stack of about 75 DVDs I made using the markers created in FCP. Also in DVDSP I never had to manually change the DVD to 16:9. DVDSP would recognize it as wide screen an automatically adjust to fit properly. Now it always sees the footage as 4:3 unless I manually adjust it. I can make it work its just several extra steps, and when your talking about 100s of dv tapes you are looking at A LOT of wasted time.
@Doody
I am not working with iDVD I am working with DVD Studio Pro
I appreciate the responses, but neither really solve this mystery.
Thanks anyway

Similar Messages

I just set my iPad to factory setting and I lost all my photos and I didn't have backup on I cloud , is there any way to get it back?

I just set my iPad to factory setting and I lost all my photos and I didn't have backup on I cloud , is there any way to get it back?

If you did not backup your iPad, your photos are gone forever.

Trying to download my pictures from vacation and my phone automatically reset to origional setting and I lost all my contacts and pictures. Is there any way to restore my phone back to today's date.

I just lost all my contacts and pictures from vacation trying to download them to my computer because my phone reset to my origional sitting. Is there a way to reset my phone back to today date or recover my pictures?

In short. No, you cannot unsync. If you had a back up from your old iPhone you cand restore from a back up.
In iTunes go to Edit > Preferences > Devices > and select the latest back up.
Before you synced your phone did you have it set up with the PhotoStream or iCloud? The pictures would be saved there. Or if you had them sync to a file on your computer.

My phone froze on iTunes logo for a day of long download, turn out it restored to factory setting and I lost my recent travel photos. How can I retrieve?

I was using my phone, then it prompt me about a new update. I hit the button to update, after few minutes or so my phone shuts off and came on with an iTunes logo and that's where the problem starts. I thought it was signaling for me to connect my phone to iTunes so I did. It had no options for me besides to restore my phone and I was not sure what was going on I thought it was the process. Even without that, on iTunes I couldn't do anything, no other options were available for my phone besides restore phone. So I clicked it took a whole day and kept coming back with error messages after long waits of trying to restore. I gave up and try again because I needed to use my phone and it still has the iTunes logo to plug to my computer then I tried it over night. This was a frustrating matter. By the time I woke up, my phone was back on with iTunes telling me to register as a new phone or back up to a month ago which was when last I backed up. Thie main issue am having is that I went on a trip two weeks before and had saved new contacts on my note app and also pctures that I took that were so impotant to me and now all lost, cleared, deleted, without my consent. Funny thing is, I turned off my iCloud long time ago because I didn't have space on it and I didn't have any other syncing deviced hooked or nothing. I wish to get all my vacational memories back pleeaaaassseee. I truly wish there was a way, I will pay a reasonable amount to get it back

I did but that was from a month before, I want pics I took after that backup time. It deleted without my consent like this is not cool. I had recent pics from my trip.

Error ORA-39125 and ORA-04063 during export for transportable tablespace

I'm using the Oracle Enterprise Manager (browser is IE) to create a tablespace transport file. Maintenance...Transport Tablespaces uses the wizard to walk me through each step. The job gets created and submitted.
The 'Prepare' and 'Convert Datafile(s)' job steps complete successfully. The Export step fails with the following error. Can anyone shed some light on this for me?
Thank you in advance!
=======================================================
Output Log
Export: Release 10.2.0.2.0 - Production on Sunday, 03 September, 2006 19:31:34
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Username:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Starting "SYS"."GENERATETTS000024": SYS/******** AS SYSDBA dumpfile=EXPDAT_GENERATETTS000024.DMP directory=EM_TTS_DIR_OBJECT transport_tablespaces=SIEBEL job_name=GENERATETTS000024 logfile=EXPDAT.LOG
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Processing object type TRANSPORTABLE_EXPORT/TABLE
Processing object type TRANSPORTABLE_EXPORT/TABLE_STATISTICS
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB [TABLE_STATISTICS]
ORA-04063: view "SYS.KU$_IOTABLE_VIEW" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.KUPW$WORKER", line 6241
----- PL/SQL Call Stack -----
object line object
handle number name
2CF48130 14916 package body SYS.KUPW$WORKER
2CF48130 6300 package body SYS.KUPW$WORKER
2CF48130 2340 package body SYS.KUPW$WORKER
2CF48130 6861 package body SYS.KUPW$WORKER
2CF48130 1262 package body SYS.KUPW$WORKER
2CF0850C 2 anonymous block
Job "SYS"."GENERATETTS000024" stopped due to fatal error at 19:31:44

More information:
Using SQL Developer, I checked the view SYS.KU$_IOTABLE_VIEW referred to in the error message, and it does indeed report a problem with that view. The following code is the definition of that view. I have no idea what it's supposed to be doing, because it was part of the default installation. I certainly didn't write it. I did, however, execute the 'Test Syntax' button (on the Edit View screen), and the result was this error message:
=======================================================
The SQL syntax is valid, however the query is invalid or uses functionality that is not supported.
Unknown error(s) parsing SQL: oracle.javatools.parser.plsql.syntax.ParserException: Unexpected token
=======================================================
The SQL for the view looks like this:
REM SYS KU$_IOTABLE_VIEW
CREATE OR REPLACE FORCE VIEW "SYS"."KU$_IOTABLE_VIEW" OF "SYS"."KU$_IOTABLE_T"
WITH OBJECT IDENTIFIER (obj_num) AS
select '2','3',
t.obj#,
value(o),
-- if this is a secondary table, get base obj and ancestor obj
decode(bitand(o.flags, 16), 16,
(select value(oo) from ku$_schemaobj_view oo, secobj$ s
where o.obj_num=s.secobj#
and oo.obj_num=s.obj#),
null),
decode(bitand(o.flags, 16), 16,
(select value(oo) from ku$_schemaobj_view oo, ind$ i, secobj$ s
where o.obj_num=s.secobj#
and i.obj#=s.obj#
and oo.obj_num=i.bo#),
null),
(select value(s) from ku$_storage_view s
where i.file# = s.file_num
and i.block# = s.block_num
and i.ts# = s.ts_num),
ts.name, ts.blocksize,
i.dataobj#, t.bobj#, t.tab#, t.cols,
t.clucols, i.pctfree$, i.initrans, i.maxtrans,
mod(i.pctthres$,256), i.spare2, t.flags,
t.audit$, t.rowcnt, t.blkcnt, t.empcnt, t.avgspc, t.chncnt, t.avgrln,
t.avgspc_flb, t.flbcnt, t.analyzetime, t.samplesize, t.degree,
t.instances, t.intcols, t.kernelcols, t.property, 'N', t.trigflag,
t.spare1, t.spare2, t.spare3, t.spare4, t.spare5, t.spare6,
decode(bitand(t.trigflag, 65536), 65536,
(select e.encalg from sys.enc$ e where e.obj#=t.obj#),
null),
decode(bitand(t.trigflag, 65536), 65536,
(select e.intalg from sys.enc$ e where e.obj#=t.obj#),
null),
(select c.name from col$ c
where c.obj# = t.obj#
and c.col# = i.trunccnt and i.trunccnt != 0
and bitand(c.property,1)=0),
cast( multiset(select * from ku$_column_view c
where c.obj_num = t.obj#
order by c.col_num, c.intcol_num
) as ku$_column_list_t
(select value(nt) from ku$_nt_parent_view nt
where nt.obj_num = t.obj#),
cast( multiset(select * from ku$_constraint0_view con
where con.obj_num = t.obj#
and con.contype not in (7,11)
) as ku$_constraint0_list_t
cast( multiset(select * from ku$_constraint1_view con
where con.obj_num = t.obj#
) as ku$_constraint1_list_t
cast( multiset(select * from ku$_constraint2_view con
where con.obj_num = t.obj#
) as ku$_constraint2_list_t
cast( multiset(select * from ku$_pkref_constraint_view con
where con.obj_num = t.obj#
) as ku$_pkref_constraint_list_t
(select value(ov) from ku$_ov_table_view ov
where ov.bobj_num = t.obj#
and bitand(t.property, 128) = 128), -- IOT has overflow
(select value(etv) from ku$_exttab_view etv
where etv.obj_num = o.obj_num)
from ku$_schemaobj_view o, tab$ t, ind$ i, ts$ ts
where t.obj# = o.obj_num
and t.pctused$ = i.obj# -- For IOTs, pctused has index obj#
and bitand(t.property, 32+64+512) = 64 -- IOT but not overflow
-- or partitioned (32)
and i.ts# = ts.ts#
AND (SYS_CONTEXT('USERENV','CURRENT_USERID') IN (o.owner_num, 0) OR
EXISTS ( SELECT * FROM session_roles
WHERE role='SELECT_CATALOG_ROLE' ));
GRANT SELECT ON "SYS"."KU$_IOTABLE_VIEW" TO PUBLIC;

Noise reduction lost during export?

Hi everybody
I'm having a very strange issue in the last few days. I work on a picture and when I export it the noise reduction is gone in the generated jpg.
Please have a look at the screenshot... the image on the right is the image I see in lightroom... the one on the left is the jpg exported.
I'd glad is some could explain why is this. I shoot with a Sony a7.
Thanks.

There is nothing for Adobe to fix. They are not going to do a full export computation every time you tweak any slider—that would take seconds per slider move and there’d be a lot more complaints about how slow LR is than there are about people who wish LR was magic.
You’ll have to learn how to sharpen in LR, rather than assuming a Fit view is how things would look when exported at an arbitrary size.
Laura Shoe has a good review about the three phases of sharpening: Capture Sharpening, Creative Sharpening and Output Sharpening, where what you’re doing in Develop is only phase 1:
1: http://laurashoe.com/2011/08/21/sharpening-in-lightroom-part-one-overview-and-capture-shar pening/
2: http://laurashoe.com/2011/09/27/creative-sharpening-in-lightroom-sharpen-eyes/
3: http://laurashoe.com/2012/07/11/sharpening-in-lightroom-part-three-output-sharpening/

Audio drop out and picture wobble during export to tape

I use a camera to capture footage from DV tapes - it's its only job and is always connected to the Mac.
But when playing back the footage from the FCP 4.5 timeline to make a back up DV copy of a finished job it all goes awry.
The audio cuts in and out - from normal audio to silence and back again at no regular intervals but every few seconds.
The picture wobbles just as though the camera isn't getting enough power (it is connected to the mains)I watch the playback with the camera's flip out screen.
On the computer it all looks fine. Playing back the DV tape shows me what I saw on the flip out screen - a wobbly picture with intermittent sound.
The cables are good. The camera works fine in all other respects, the external firewire drives work fine, the computer is good.
I'm stumped! I can't export to tape any more...
But exporting the files via compressor to make DVDs is fine - no problems.

Playing back the DV tape shows me what I saw on the flip out screen - a wobbly picture with intermittent sound.
The cables are good. The camera works fine in all other respects, the external firewire drives work fine, the computer is good.
Not quite sure how you reach your conclusion in the second paragraph. If it displays fine on the computer and is TOTAL JUNK after it heads out the firewire cable - I'd start with every piece of equipment that connects to the computer. Time to do A/B testing. find another camera, A-DV converter, firewire cables, even the computer and test each element.
good luck.
x

Database configured for Syncronous mirroring and connection lost during transaction.

Hi,
In a synchronous mirroring session data commit on mirror first and then on the primary. But in a scenarion that data has commited on Mirror but when it goes to commit on primary then then primary server goes down or via any behaviour it is not able
to commit on primary. then what is the flow, how we will get that data commit on primary.
Thanks in Advance.
Regards, Ashish Tripathi

Well, primary doesn't send data to mirror. It's the mirror server which would pull the data. As long as confirmation from mirror is not received, the transaction would not be committed.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

Multicam Editing Problem during Export Pr CC

Hey guys, first post.
i have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC
I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I am so very confused as to what is going on so any help at all would be awesome. Its very frustrating to work on something for so long and it fail during export.
I will attach an image showing a glimpse of what my problem is. (Please excuse the camera work)
Thanks again
Dan
Specs.
2012 iMac
Processor 3.1 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 512 MB
Software OS X 10.9.1 (13B42)

The triangles indicate hard media boundaries -- there are no more frames available from the source clip beyond that frame. If you don't have a triangle on a clip at an edit point, then the source media has frames available beyond the in or out point of that clip instance on the timeline.
There are a few things that might cause what you're seeing, so I recommend you check your multicam source sequence to make sure that it's referencing the correct media, and that all the media in your project points to the correct files on disk. Double- and triple-check that all the clip instances in the timeline point to the correct sequence or media. If the problem is related to clips on the timeline not pointing to the right thing, you could save yourself some work by trying to fix that instead of re-creating your edits. You should also see if you have any Auto-Saved projects that don't have the triangles at the edit points and that play the edited sequence correctly -- you could save yourself even more work.
Cheers,
Jeff

I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines. Can anyone help. I can call as I have unlimited calling on my iPhone 6 anywhere in North America.

I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines. Can anyone help. I can call as I have unlimited calling on my iPhone 6 anywhere in North America.

king,
If your Powerbook's serial number (do not post it here) starts with "W8" then the vertical lines are mostly likely due to a defect in the display itself. W8 is a factory code and, during the iMac G5 and PowerBook G4 timespan, that factory shipped thousands of units with the same defect. It cannot be fixed via software.
As all PowerBooks are now classed as "obsolete," an Apple Store will not work on it. They will look at it ands tell you it has vertical lines and that they cannot fix it. This Apple article shows Apple devices they curently considered obsolete:
Vintage and obsolete products - Apple Support
It is possible that some Apple Authorized Service Providers (AASP) will still work on older computes but they cannot get neededparts from Apple. As this issue was so pervassive, it wil be hard for you or an AASP to find a used/pulled display that is not effected with the "W8 Curse."
Although I love the old PowerBooks, I would not even spent the money for disks, much less the US$150-400 it would cost to replace the display, even should one be available.
If you give us a rough idea of where you are in the world, we can suggest repair shops specializing in fixing older Mac notebooks, but be aware those resources may be rather scare outside North America.

How do I set up my drag and drop questionaire to export to a XML file?

How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and drop rank order response of 1,2,3,4.How do I set
up a XML file that receives the responses.I don't understand how to
do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

Use XML.sendAndLoad.
http://livedocs.macromedia.com/flash/8/main/00002879.html
You will need a server script to receive the XML structure
and it depends on
the server scripting language how you obtain that data. Then
you can either
populate a database or write to a static file or even email
the XML data
received from Flash.
For a basic example, I have two links I use for students in
my Flash
courses:
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLASP/Ex01/XMLASPEchoEx01_D oc.php
http://www.hosfordusa.com/ClickSystems/courses/flash/examples/XMLPHP/EX01/XMLPHPEchoEx01_D oc.php
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"kenpoian" <[email protected]> wrote in
message
news:e5i9hp$cs6$[email protected]..
How do I set up my drag and drop questionaire to export to a
XML file?
I have a 70 seperate SWF files that pose a question and
contain a drag and
drop rank order response of 1,2,3,4.How do I set up a XML
file that receives
the responses.I don't understand how to do the Actionscript
and get my responses to connect to the XML.Please
Help!Thanks!
Here's an example of my XML.
<assessment>
<sessionid>ffae926ea290ee93c3f26669c6c04a92</sessionid>
<request>save_progress</request>
<question>
<number>1</number>
<slot_a>2</slot_a>
<slot_b>1</slot_b>
<slot_c>4</slot_c>
<slot_d>3</slot_d>
</question>
<question>
<number>2</number>
<slot_a>4</slot_a>
<slot_b>3</slot_b>
<slot_c>2</slot_c>
<slot_d>1</slot_d>
</question>
<question>
<number>3</number>
<slot_a>1</slot_a>
<slot_b>2</slot_b>
<slot_c>3</slot_c>
<slot_d>4</slot_d>
</question>
</assessment>

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

I never used icloud before so there is no data to back up from. I just spoke to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
Renee

How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

Yes, try to restore your iPhone from iTunes or iCloud backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Tell us the result if you will try.
<Link Edited By Host>

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.

Sync between MacBookPro and iPhone 3G does not sync properly. Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync. Any contacts on iPhone which are not on Mac are lost during sync.
Solutions?

No, I never really found an easy solution. I believe it is an issue with some corruption in the iTunes database on the specific device. In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs. A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup. It did work, so I imagine it would probably work for my current issues with the iPhone and iPad. But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost. When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might. If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it. I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

Anamorphic setting and chapters lost during export

Similar Messages

Maybe you are looking for