Anchor is taking assets off center with Scroll Motion effect.

I have built a Onepage Website with Scroll Effect. When I reach the Share Anchor, i've got a bug with the element appearing with a Scroll Effect. You can create the bug by reaching Share Section, and by clicking on the Share menu another time. You'll see the Asset going off center with different browser Size.
My anchor si set to -480px on a 960 artboard with a 1920 centered assets.
http://litecoaching.businesscatalyst.com/
Thanks for the help

Specialcase has a very interesting site over Motion.Among other things you'll find Illustrator paths.Look if they can help you.The link is: http://www.motionsmarts.com/downloads.html
P.S. While you'll at it, visit the tutorials as well.Very good work.

Similar Messages

How do I achieve browser width images with scroll motion set to 0?

How do I achieve browser width images with scroll motion set to 0?
An example can be seen here with the green image: http://www.qooqee.com/templates/aroma
I can get the rectangle to stretch the width of the browser but not the image fill. (see - http://www.tomwellsassociates.com)
My Muse fill settings:
Fill type: Solid
Colour: None
Fitting: Tile vertically
Position: Bottom Centre
Scroll motion: On (Up - 0)
Image Size:
3311 x 3311 px
Display: Apple imac 27"
Any suggestions/help would be much appreicated...

Please check out: http://forums.adobe.com/message/5701908
Cheers,
Vikas

Printing off center with splix and gdi drivers

I was just installing cups to get printing working with my Samsung ML-1740 printer. There are two drivers, I found, available for it splix and gdi. Splix is supposed to be the better driver, but I found both print pages off center, to the right, splix more so (about 1/8 inch) than gdi. Is there anyway to correct for this globally on my system? I'd rather not have to modify the margin settings in every document manually. Or is this just a bug and going to have to be addressed by the authors of the drivers?

When printing using Acrobat Reader, the problem with me was DOH, the paper was jiggling around in the paper feeder. I tightened up the guides and got better results sideways, and ok with the length.
However, the person I am doing the job for continued to have problems, and it was not until he sent me a printout from his HP all in one printer that I suspected that his cheap printer was trying to HELP matters.
I had run the background color full bleed to the very edges of the paper. Easier to find out where the off center problem was. He was pretty good on the vertical centering, but the bottom of the card really showed a distinctive problem. The ink stopped printing at EXACTLY the usual 1/2" margin on the bottom, where one would normally break apart or trim the cards. In addition, the HP apparently pulled this edge 1/8" up. I think the HP was trying to HELP us idiots from running the live area (ie, type) right to the crop edges.
So, I changed the design, removed all physical crop marks (used only for gauging how the pages were printing in relation to the scored biz card stock) and removed the background color bleed from the bottom...actually redesigned all cards so there would be no bleeds at all, He seemed to think that solved the problem, and the HP did not feel inclined to help. And it did not vertically shrink the pdf image to the safe live area.
It's hard dealing with someone with very rudimentary skills in these things. Even phone conversations weird. He didn't understand that all the ten cards were now one pdf image, and that Avery template would not help in this case.
He's waiting to get more card stock for his biz cards, and will finally see if it printed right for him.

Rollover for element with Scroll Motion?

Hey There, I'm having a problem where I can't apply a rollover function to a jpeg that already has parallax scrolling applied to it. The scroll motion is working just fine. But when add an effect, like a shadow, to the jpeg under the rollover state, the next time I preview or upload the html to my server the jpeg is gone altogether. I've tried a number of options but am racking my brain for a way to have both a rollover function and parallax scrolling on the same element.
Thanks for any advice.

Hi Justin, I realized that I could use the tooltip widget to utilize the rollover function with that and then put scroll motion on the widget itself and it seems to work just fine.

Link anchor takes the page off center

I set up my page to be in the center of the browser and when i go to preview and click on the link that is linked to a "link anchor" the entire page moves to the left of the browser placing the anchor at the top corner of the browser. How can i keep the page centered when clicking on the link?

I'm running Muse v3.2 Build 2 and had just updated some info and re-exported my site, and noticed that the Anchor links have stopped working in Chrome and Safari. When clicked, the page moves sideways in the browser and does not return to the top of the page. It does work correctly in IE and Firefox. One of the affected pages is http://www.i-review.com/implementation.html so when you scroll down and click any of the 'To the top' links, this happens once then nothing. If you go to another page like http://www.i-review.com/training.html it will occur there once too.

Keys Off Center with Aluminum

Hello all,
I recently purchased a new 13" Macbook Pro Retina. This is the one with the force trackpad, so I guess it is a "2015" model. Anyway, the laptop has been working perfectly and I love it except for one thing. They keys don't seem to be centered in their aluminum slots. I.e. the gap on the left side of aluminum to key is wider than on the right, and hence the backlight shows much brighter when viewed at a left angle.
It is a small thing, but kind of annoying. Anyone know if this is normal? Is it something that can be easily fixed, or am I just being... well obsessive ;-). I do have Apple Care on it but am not sure that would help. I really do not want to return it in full.

Ignore this topic. It was only the plastic film that distorted the display. hehe

I'm on Mac OS lion and since your new upgrade, the page loads of center, with no scroll bar. On every computer I run I have to resize the page for the page to load correctly. How can I fix this?

I'm on Mac OS lion and since your new upgrade, the page loads off center, with no scroll bar, this happens on every computer I run.
In order to have the page load correctly, have to manually resize the page.
How can I fix this?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Macbook Pro Off-Center on LCD TV

I am wanting to use my Macbook Pro hooked to a Samsung 32" LCD TV as a secondary display. When I attempt to set the Samsung resolution to 1360x768 in Mac's display preference, the image is off-center with a black band down the left side of the tv. I have used the dvi to vga supplied with my macbook, and have vga going into the set. When i set the resolution to 1024x768 the image is centered (but stretched).
Anyone else seen this? Any suggestions? I have searched the forum and the entire interweb, but cannot find anything.
Thanks!

Yes, DVI-to-HDMI is probably your best bet.
http://www.bestbuy.com/site/olspage.jsp?skuId=7750034&type=product&id=1140394359 520
I've even seen them at Target...

Scroll Motion Elements Shake When Using Anchors

When the browser window is narrower than the site, elements with scroll motion "shake", often severely, and sometimes change position when using links to jump to different anchors on the page. What causes this and is there a way to fix it?
Here is the site I'm working with. If you scroll using the scroll bars, there is no issue, it only happens when using the links in the bar at the top. Any ideas? Thanks.
http://cuberogroup.businesscatalyst.com/

Hi @Kydos
Thank you for your reply.
I grasp that if you disable the graphic driver in device manager the issue is gone.
Here is a link to Resolving Video and Graphics Issues that will assist with this.
Have you tried running the HP Support Assistant to look for any HP updates?
Here is a link to the HP Envy 17t-1000 CTO Notebook Software & Drivers to verify you have all the recommended updates.
You could also try reseating the card if that does not help.
Next would be to test the card. Testing for Hardware Failures (Windows 7, Vista)
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Pas d'onglet scroll motion dans effets

Bonjour, dans ma version (v4.1 Build 8) il n'y a pas d'onglet "scroll motion" dans "effets". Comment puis-je la trouver?Merci

salut
il y aura une mise à jour le 17 juin d'après ce que j'ai lu
et le terme serait le suivant : Scroll Motion Effects (Parallax Scrolling)
pour voir une vidéo sur le sujet :
http://tv.adobe.com/watch/creative-cloud-for-design/discover-new-parallax-scrolling-with-a dobe-muse-cc/

I can't turn off wifi with Control Center

I can't turn off wifi with Control Center after updated ios 7.0.6

It's running
I already checked dmesg and nothing happens. It works with Vista, so...
With my old laptop (it's the same model) brightness didn't work, and now this. I guess i'll wait for a new update

Hi, I have recently bought an I pad 2, 32Gb with just wi fi. I have being putting stuff on and taking stuff off, just generally getting to know it. I have now deleted evrything on it but it still shows that i still have 1.87 GB on it in "other".

Hi,
I have recently bought an I pad 2. I have been playing around with it, putting films on then taking them off. I have now deleted everything on it but it shows I still have 1.87GB on it in "other".
What does this mean?

That happened to me and I read on these forums that it indicated corrupted files. I restored the iPad as new and the problem was solved.

In Firefox 5.0.1, why are websites off-center now? And where are the scroll bars?

After updating to Firefox 5.0.1, website content presents off-center, font sizes are either too big or too small, and the scroll bars are missing. I am running OSX 10.5.8 on a Mac Mini.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Credit Scroll - Title Effect - Cannot Adjust Border - Text Cut Off

QUESTION:
How can I insert 2 - 3 paragraphs into the credit scroll text effect, format it so the sides of it are not cut off, and prevent Final Cut Pro from reverting back to the default text that comes with the video effect?
SUMMARY:
I am trying, in vain, to copy and paste 2 - 3 paragraphs that I want to scroll across the page as if they were credits. Furthemore, I am trying to justify the whole thing to the left. The left and right edges of the paragraphs are cut off when I render the video using compressor. There is some kind of white box that holds the text. It appears to be the boundary of the text effect.The text bumps up against the boundary, but I cannot easily tell the text to give itself some space between it and the white boundary. If I double click the text effect I bring up a few difficult-to-use formatting tools. There are little white circles and triangles that appear to represent left tab, center tab, and right tab. Everything I do with these circles and triangles seems to have no impact or screws it up. To further complicate matters it seems when anytime I interact with this rudimentary formatting tool set I cause the entire text effect to default to its original form. I have to quit out of Final Cut Pro and reopen it and repeat the process by repasting the text.

I gave up and just made an image in photoshop. I then keyframed the image to scroll across as the credit scroll effect should have done.

Titles off center. imovie08

I have several posts regarding the crashes experienced using imovie08. My post today is in regards to the titles that I put into my project. II am working in 16:9 (shot on the camera in that format, and I specify 16:9 when creating an Imovie08 project) When I add titles using the scrolling credits, all of my type is all center aligned just left of center. It almost appears that Imovie08 does not recognize that fact that I set the project to be 16:9 and is centering it for 4:3??? I don't' know but you spend time doing somthing and the this simple operation gives my projects a very bad "feel", like I forgot to hit the align button. I hope Apple fixes all of these quirks with the next update.....I love the new Imovie08 in theory, but I have to give it an "F" in actual functionality thus far...great concept, very poor execution of this application on Apples part. They should have never released the "new version" with all these bugs in it. Especially for a company that has this "media " reputation...Apple /PC commercials....yeah my Apple can make movies but the type is off center, it keeps crashing and losing info(projects)..so if you want to keep things you create, and have your titles actually centered in the frame, use a pc?? BTW i would never buy a pc, but when my pc friends see this #$%7 it doesn't make them want to switch to Apple anytime soon. Bad move on Apple's part in releasing a sub par product...keep the quality high. That's why people like Apples, because they work.

I just wanted to add that I too am experiencing the issue of "centered" titles being shifted slightly to the left of center. This is NOT an issue of failing to select centered justification in the 'Show Fonts' box. The titles are center-aligned, but their center point is somewhat left of the center of the frame.
I'm working in 4:3 format, incidentally, so this isn't a 16:9-specific behavior.
Note that the text appears correctly centered when I'm typing or viewing it in the edit box. It doesn't shift to the left until I preview it or play back the project.
*Here's a specific thing I've found that triggers the behavior:*
-- When you're typing your scrolling credits, as long as they all fit in the original edit box, your title will center correctly.
-- As soon as you add one additional line of credits, forcing the text to scroll up in the edit box, your text will be shifted to the left when you preview it.
-- If you delete the added line, so the text no longer has to scroll in the edit box, your title again will center correctly.
So, I guess a workaround is to split long scrolling lists into multiple titles. But you shouldn't HAVE to do that. I'd say we've exposed a bug here.

Anchor is taking assets off center with Scroll Motion effect.

Similar Messages

Maybe you are looking for