Anchor Points not consistently responding

I am trying to set up a Nine (9) Box "Hollywood Squares" style page layout, however the 3 pages along the left margin (top to bottom) do not respond consistently to their anchor point links? Any ideas why?

Figured it out ... I had set my left column Anchor points on the left margin at x: "0". When I moved it one pixel to x: "1" everything worked.

Similar Messages

  • Anchor point not working with pinned page navigation link

    Anchor point at top of page, named top, does not function when clicking on pinned navigation link text.  Correct link has been made in the Links menu.  What procedure might overcome this functional problem?
    I have the same type of anchor point named 'top' on other pages and the pinned navigation link works fine on those pages.  For some reason only one page shows this problem.
    Thanks,
    Tim

    Try moving the 'top' anchor down a little bit. I have run into a few issues when the anchor was to close to the top of the canvas for example JS not smooth scrolling, it would just jump to the top or it would not do a thing like what you are experiencing.

  • Object's anchor point not "sticking".

    I'm using Flash CC and experiencing an issue with anchor points. I have Movie Objects on the stage and I usually can set their anchor point, create my keyframe, and then use classic tweens to rotate and animated based on where I placed my anchor. Upon trying to animate today, my anchor points weren't sticking when I adjusted them. It's been a couple weeks since I last used Flash to animate not sure if anchor points have somehow changed. But it is very frustrating that they aren't staying in place. Please help!
    I'm using Win 8.1 on a Surface Pro (1st gen).
    Thanks,
    Ian

    I was only getting it on my SurfacePro - tried it on my desktop (running Win 8.1) and it didn't show up again. I looked like a timeline adjustor that you would find in Premiere or After Effects. But it really wasn't breaking anything so I'll ignore it. I was able to capture my issue on video, and although I thought I had figured it out, it seems that there is still an issue with using anchor points and classic tweens. Take a look at the video if you have a chance:
    http://youtu.be/FXCbDRkfinA
    -Ian

  • Recently my iPad does not consistently respond to a single or double click on the home button and i've had no choice but to turn it off and back on to escape fron the app  i'm using. Can't say it is consistent with any one app. Suggestions are asked for

    My ipad recently seems to be freezing and not responding to home button single or double clicks?

    While this could potentially be a hardwar issue:
    Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
    If the reset doesn't work, you may need to consider restoring the iPad to factory settings

  • Put convert anchor points options in Keyboard Shortcuts

    I have two objects with the exact same border path and multiple types of points within the border. I believe that the only way to covert two corner points (at the exact same location) into smooth points (and thus maintain the exact same path for both) is to use the Control panel method (paste in from Help, below). This requires going clear up to the Control panel. I wish that both of these Control panel options where available under Keystroke Shortcuts. This would allow much faster operation that the long trip for my mouse or pen on my large Wacom board.
    -------> From AI Help file:
    Convert one or more anchor points using the Control panel
    To use the anchor point conversion options in the Control panel, only relevant anchor points, not the entire object, should be selected. If you select multiple objects, one of the objects must be only partially selected. When entire objects are selected, the Control panel options change to those that affect the entire object.
    To convert one or more corner points to smooth points, select the points and then click the Convert Selected Anchor Points To Smooth button in the Control panel.
    To convert one or more smooth points to corner points, select the points and then click the Convert Selected Anchor Points To Corner button in the Control panel.

    The buttons are not recordable.
    > I believe that the only way to covert two corner points (at the exact same location) into smooth points (and thus maintain the exact same path for both)
    Unless I'm misunderstanding your description, Illustator's new but lame convert buttons do not really meet your criteria anyway. The Convert to Smooth button does not merge two coincident corner points on the same path into a single smooth point. You still have two points.
    If the two coincident points are actually endpoints of two separate paths, CtrlShiftAlt-J will average their positions, join and merge them.
    The convert point type commands should be located in proper contextual cursor menus in AI. But AI does not really have proper contextual cursor menus.
    AI's confused interface has pretty much run out of practical keyboard shortcuts.
    Illustrator's new convert anchorpoint buttons are very lame compared to the features that have long existed in Adobe's other drawing program, FreeHand. The convert to corner button should not retract existing handles. The convert to smooth should not always extend handles. Provision should be made for individual retraction/auto-extension when converting.
    We are not seeing Adobe leverage the rights to better functionality it gained when it acquired Macromedia. We are only seeing cheap, piecemeal imitations and lip-service toward the still-superior functionality in the acquired program.
    JET

  • [newbie] Sharing anchor points across paths/shapes? + Pen visual feedback? + Show all paths?

    Hey all, as stated I'm a newbie at Illustrator. Any help's appreciated. My questions:
    1) Is it possible to have anchor points be part of more than 1 path? I want to have 2 adjacent filled paths that share anchor points, so that if I move the common edge anchors, both shapes are affected. Kinda like in Flash, I suppose.
    My guess is this is impossible though? Then how do people working with Illustrator a lot tackle this problem? I mean adjusting 2 shapes with several common anchor points (not shared, just in the same position), for adjacent shapes.
    2) Is it possible to set the Pen tool to give visual feedback like in Photoshop when moving the mouse to a new position to add a new anchor point? What Photoshop does is show the path segment that would be created if you were to click at the current mouse position, whenever you move the mouse. Illustrator doesn't show this with me right now, so I'm left to guess what the exact path segment will look like when I click (less convenient imo).
    3) Is there a way to always show all paths on the current layer, even if they are not selected? And I do NOT mean Outline mode, I'm aware of that. The problem I'm facing is that - when working with multiple paths - I want to see them all when adding a new path, so I can easily align anchor points and what not with the other paths, but I do NOT want to hide the image I'm tracing (which would happend in Outline mode).
    Thanks in advance.
    Victor

    You might get what you re after using Live Paint. Here I have drawn an oval and a wavy line — two paths. After converting to a Live Paint object I can selectively fill and stroke any closed area or and segment.
    No.
    Put the object or image you are tracing on a Template layer. Or Command (Mac) or Control (Windows) click on the eye next to a layer name to change only that layer’s view mode.

  • How to create a wavy line with consistent wave regardless of anchor point spacing?

    The above image shows my problem. All have the same zig zag effect setting, but due to inconsistent anchor point spacing there is inconsistent waviness. Is there a way to make a wavy line that is not a distortion based on anchor point distances? I'd like all my wavy lines to look nice and consistent like this:
    The only reason they're so consistent is the absolute setting has been used but these lines are all straight and have only 2 anchor points, start and finish, hence the wave is consistent. It's harder when the lines are curvy and have a different number and spacing of anchor points.

    If you want the fill to follow the boundary, here's one way to do it, more easily done than demonstrated:

  • Direct Selection Tool will not choose individual "path" anchor points

    Photohsop CS4, 11.0.1
    Mac OSX 10.4.11, MacPro, Dual-Core Intel Xeon, 2.66 GHz, 9GB RAM, NVIDIA GeForce 7300 GT-256 MB VRAM, 500GB Startup HD, 500GB HD (wlhere file resides and scratch disk), OpenGL enabled
    I am unable to select individual anchor points and line segments of a path, although the anchor points appear to be individually highlighted, copying them copies the entire path, not just the selected points, and deleting them deletes the entire path, not just the selected points. In effect the "hollow arrow" direct selection tool is working like the "solid arrow path selection" tool.
    I ran Disk Warrior, repaired disk permissions. I deleted old preferences by renaming file with Photoshop closed, and then restarted photoshop.
    After calling Adobe Tech Support, they are recommending I reinstall the entire CS4 suite, which I am hesitant to do. At the least I will lose all of my menu preferences in all programs. Should I just follow their advice and reinstall CS4?
    Thanks.

    When you click on it with path selection tool (black arrow) which option is enabled in options bar at top - add, subtract, intersect, or exclude?
    Can you combine paths?
    Have you tried drawing a new path and selecting points on it?
    Can you still add and subtract points?
    Edit: Can you pull on the bezier handles?
    Edit: is it a vector mask or a standalone path?
    I'm trying to simulate your problem – in the meantime I'm brainstorming, not sure how else to help. It seems like something restarting the program would fix.
    What about quitting the app. Then going to User: Library: Prefs: Adobe Photoshop CS4 paths, trash it then restart?
    Message was edited by: Printer_Rick: Added Edit: Can you pull on the bezier handles?

  • CS5: Moving Anchor Points w/ Transform Panel, Not Whole Object

    Hey there. Did the digging before asking but nothing came up. I'm pretty green, so I'm sure it's something silly. I'm trying to move specific anchor points on a path a few pixels up from their current position, while keeping everything else where it is, so it'll transform the figure's shape. I'm trying to do it precise by changing it's dimensions, rather than clicking and dragging. Thankfully, that's at least an option because it -does- work when I direct select the points I want and drag them. Problems with that:
    1) I have very little control. If I want the point moved up by whole pixels, I pretty much have to get lucky because it's always in decimal points.
    2) With shapes bordering each other (parts of a complex shape), if I want to move their location to scrunch something (Half circle in a larger half circle, wanting to flatten out the base), if I lift those points up, they leave a gap. As if the top border of the outer circle has another anchor point under the lower of the one above that, and I can't click on it to move everything while they're still touching. I can take screenshots if needed. I'm following a tutorial to get used to the program.
    Alternately, I suppose if you have a shortcut for constraining the drag to whole pixels instead of fractions, that's great too. In Photoshop and the like, holding Shift would give me precision, but that's not the case in this tool or perhaps program.
    Thanks a bunch. This program is frustrating, but I know I'll have fun with it when I get it.

    Hard to decipher exactly what you are asking for, but after reading your post a few times sounds like you want to move vector point by whole pixles amounts.
    Have you tried setting your keyboard increment to 1 pixel, and using the cursor keys to nudge points.
    If you are working on digital work, you may want to turn on snap to pixel grid, which will also kepep all your times to whole pixel amounts.

  • Anchor points and paths not displaying!

    When I create a new shape, the anchor points and path are not visible. How do I make them appear? I don't see them at all in any shape I create....

    Beckmania wrote:
    Hi JJMAck,
    The problem isn't with selecting a path or anchor point, but rather seeing them at all. I watched a tutorial video, where the user chose the rectangle shape tool, created a rectangle, and the path and anchor points of the rectangle were visible. When I create a rectangle, no path or anchor points are displayed.....
    Any thoughts on that situation?
    Thanks!!
    John
    What you saw in the tutorials is how newer versions of Photoshop work older Photoshop versions do not display the points and the way shape layer are depicted in the layers palette is also different.
    What version of Photoshop are you using?
    While CS6 is close to CC it does not show the points and there may even be differences between the PC and Mac versions of Photoshop.

  • Tools related to anchor points are not working, can't add a point to paths or convert a point.

    Having a lot of issues manipulating points on paths in Illustrator CC - this is a fundamental feature of creating vector graphics and it's very annoying I'm paying for this and it's just not working. Eating up a lot of my time simply because I can't select or convert or add the anchor.

    bella,
    Presuming we are not just talking about more or less hidden Anchor Points as in View>Show/Hide Edges/Bounding Box, you may try to start on the following list (5) seems unlikely in this case).
    You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Illustrator free distort does not transform anchor points

    When using Illustrator CS5 after applying the Free Distort effect, the anchor points remain in the original location. How can I get the anchor points to align to the transformed object?

    It is an effect so it does not really change the object. That's why you can always go back and change or delete the effect.
    If you want the effect permanently applied select Object > Expand Appearance.

  • Show not selected anchor points (and connect)

    Hello.
    Every now and then I have the problem in Illustrator that I want to connect two anchor points with the pen tool. The two anchor points belong to different objects. Is there any way to always show all anchor points. Today I have to select one of the object to see the first anchor point I want to connect. And then hovering the point over the plaece where I presume the second anchor point is located until the mouse icon indicates that I have the pointer at an anchor point.
    A second question: Is there any way to connect more than two “lines” to an anchor point? I.e intersect and connect an anchorpoint in the middle of a line with a third anchor point.

    Almost.
    My thought was that if I could see all anchorpoints of all objects, without selecting the objects. Ie. se all "white" anchor points,  when I select them they will become "filled/blue".

  • Metadata of Controller EMPTYVIEW Is Not Consistent.

    Hi,
    After upgrading NW04s from SP07 to SP11, one of my web dynpro for ABAP application gives the following error on execution.
    I am also getting a system dump. I have checked all the necessary services in SICF & most of the required services are active. Does any one have some idea of how I can resolve this error.
    Error when processing your request
    What has happened?
    The URL http://ustca644.kcc.com:8086/sap/bc/webdynpro/sap/zvmkc_tsvm_main/ was not called due to an error.
    Note
      The following error text was processed in the system PGW : Metadata of Controller >EMPTYVIEW< Is Not
    Consistent. "View Controller" Does Not Contain a "View"
      The error occurred on the application server ustca644_PGW_20 and in the work process 0 .
      The termination type was: RABAX_STATE
      The ABAP call stack was:
    Method: CONTROLLER_KIND_TO_TEXT of program CL_WDY_RG_META_SERVICE========CP
    Method: CONSTRUCTOR of program CL_WDY_RG_CONTROLLER==========CP
    Method: GET_CONTROLLER_PARTS of program SAPLWDR_RUNTIME_REPOSITORY
    Method: SAVE_COMPONENT of program SAPLWDR_RUNTIME_REPOSITORY
    Method: SAVE of program SAPLWDR_RUNTIME_REPOSITORY
    Function: WDR_SAVE_REPOSITORY of program SAPLWDR_RUNTIME_REPOSITORY
    Method: SAVE of program CL_WDR_RR_DB==================CP
    Function: WDY_WB_GENERATE_INTERNAL of program SAPLWDY_WB_ACTIVATION_SERVICES
    Function: WDY_WB_GENERATE of program SAPLWDY_WB_ACTIVATION_SERVICES
    Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
    What can I do?
      If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system
    PGW in transaction ST22.
      If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on
    the application server ustca644_PGW_20 in transaction SM21.
      If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work
    process 0 in transaction ST11 on the application server ustca644_PGW_20 . In some situations, you may also need to analyze
    the trace files of other work processes.
      If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 400 -u: C14216 -l: E -s: PGW -i: ustca644_PGW_20 -w: 0 -d: 20070222 -t: 222514 -v: RABAX_STATE -e:
    UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    System Dump
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_WDY_RG_MD
    Date and Time          02/22/2007 22:25:14
    Short text
    An exception occurred that was not caught.
    What happened?
    The exception 'CX_WDY_RG_MD' was raised, but it was not caught anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_WDY_RG_META_SERVICE========CP' has to be
    terminated.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDY_RG_MD', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Metadata of Controller >EMPTYVIEW< Is Not Consistent. "View Controller" Does
    Not Contain a "View"
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_WDY_RG_MD"
    "CL_WDY_RG_META_SERVICE========CP" or "CL_WDY_RG_META_SERVICE========CM001"
    "CONTROLLER_KIND_TO_TEXT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "ustca644"
    Network address...... "165.28.85.39"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "PGWA"
    Database type..... "DB2"
    Database name..... "PGW"
    Database user ID.. "SAPR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Oct 30 2006 00:08:55"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "DB2CLI.DLL 08.02.0003 "
    Patch level. 83
    Patch text.. " "
    Database............. "DB2 for OS/390 7.1, DB2 for OS/390 8.1, DB2 for OS/390
    9.1"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 16192
    EM...... 16759360
    Heap.... 0
    Page.... 0
    MM Used. 12837904
    MM Free. 3918160
    User and Transaction
    Client.............. 400
    User................ "C14216"
    Language Key........ "E"
    Transaction......... " "
    Program............. "CL_WDY_RG_META_SERVICE========CP"
    Screen.............. "SAPMHTTP 0010"
    Screen Line......... 2
    Information on Caller ofr "HTTP" Connection:
    Plug-in Type.......... "HTTP"
    Caller IP............. "165.28.239.30"
    Caller Port........... 8086
    Universal Resource Id. "/sap/bc/webdynpro/sap/zvmkc_tsvm_main/"
    Information on where terminated
    Termination occurred in the ABAP program "CL_WDY_RG_META_SERVICE========CP" -
    in "CONTROLLER_KIND_TO_TEXT".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 20
    of the (Include) program "CL_WDY_RG_META_SERVICE========CM001".
    Source Code Extract
    Line
    SourceCde
    1
    method CONTROLLER_KIND_TO_TEXT .
    2
    3
    data:
    4
    cref_View type ref to cl_wdy_md_view,
    5
    ctlr_Type type Wdy_Md_Controller_Type.
    6
    7
    ctlr_Type = controller->get_type( ).
    8
    9
    case ctlr_Type.
    10
    11
    when wdyn_ctlr_type_custom.
    12
    controller_type_as_text = 'CUSTOM'.
    13
    14
    when wdyn_ctlr_type_view.
    15
    controller_type_as_text = 'VIEW'.
    16
    if ( ABAP_FALSE eq Controller->Has_View( ) ).
    17
    " view controller must have a view
    18
    gi_Cx_Text =  Controller->Get_Name( ).
    19
    gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
    >>>>>
    raise exception type Cx_Wdy_Rg_Md
    21
    exporting
    22
    TextId =     Cx_Wdy_Rg_Md=>Controller_Data
    23
    Controller = gi_Cx_Text
    24
    Reason =     gi_Cx_Hint.
    25
    26
    else.
    27
    gi_Cx_Text =  Controller->Get_Name( ).
    28
    if ( gi_Cx_Text eq 'EMPTYVIEW' ).
    29
    return.
    30
    endif.
    31
    32
    " sanity check against illegal CL_WDY_MD_EMPTY_VIEW
    33
    try.
    34
    cref_View ?= Controller->Get_View( ).
    35
    if ( cref_View is initial ).
    36
    gi_Cx_Text =  Controller->Get_Name( ).
    37
    gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
    38
    raise exception type CX_Wdy_Rg_Md
    39
    exporting
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    1
    SY-TABIX
    2
    SY-DBCNT
    0
    SY-FDPOS
    7
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    HTTP Control
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20070222
    SY-UZEIT
    222514
    SY-XPROG
    SY-XFORM
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    22 METHOD       CL_WDY_RG_META_SERVICE========CP    CL_WDY_RG_META_SERVICE========CM001    20
    CL_WDY_RG_META_SERVICE=>CONTROLLER_KIND_TO_TEXT
    21 METHOD       CL_WDY_RG_CONTROLLER==========CP    CL_WDY_RG_CONTROLLER==========CM001    25
    CL_WDY_RG_CONTROLLER=>CONSTRUCTOR
    20 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11            684
    LCL_SAVE_REPOSITORY=>GET_CONTROLLER_PARTS
    19 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             91
    LCL_SAVE_REPOSITORY=>SAVE_COMPONENT
    18 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             29
    LCL_SAVE_REPOSITORY=>SAVE
    17 FUNCTION     SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYU02             27
    WDR_SAVE_REPOSITORY
    16 METHOD       CL_WDR_RR_DB==================CP    CL_WDR_RR_DB==================CM002     3
    CL_WDR_RR_DB=>SAVE
    15 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU04        279
    WDY_WB_GENERATE_INTERNAL
    14 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU01         84
    WDY_WB_GENERATE
    13 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF12             77
    LCL_REPOSITORY=>CONSTRUCTOR
    12 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01             17
    LCL_COMPONENT=>CONSTRUCTOR
    11 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            669
    LCL_COMPONENT=>IF_WDR_RR_COMPONENT~GET_USED_COMPONENT
    10 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            245
    LCL_COMPONENT=>IF_WDR_RR_COMPONENT~CREATE_COMPONENT_USAGE
    9 METHOD       CL_WDR_MESSAGE_WINDOW=========CP    CL_WDR_MESSAGE_WINDOW=========CM001    30
    CL_WDR_MESSAGE_WINDOW=>CONSTRUCTOR
    8 METHOD       CL_WDR_APPLICATION_WINDOW=====CP    CL_WDR_APPLICATION_WINDOW=====CM00K     6
    CL_WDR_APPLICATION_WINDOW=>INITIALIZE
    7 METHOD       CL_WDR_CLIENT_COMPONENT=======CP    CL_WDR_CLIENT_COMPONENT=======CM004    59
    CL_WDR_CLIENT_COMPONENT=>DISPLAY_TOPLEVEL_COMPONENT
    6 METHOD       CL_WDR_CLIENT_APPLICATION=====CP    CL_WDR_CLIENT_APPLICATION=====CM00L    30
    CL_WDR_CLIENT_APPLICATION=>INIT
    5 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00I    40
    CL_WDR_MAIN_TASK=>EXECUTE
    4 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00J    69
    CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
    3 METHOD       CL_HTTP_SERVER================CP    CL_HTTP_SERVER================CM00I   524
    CL_HTTP_SERVER=>EXECUTE_REQUEST
    2 FUNCTION     SAPLHTTP_RUNTIME                    LHTTP_RUNTIMEU02                      929
    HTTP_DISPATCH_REQUEST
    1 MODULE (PBO) SAPMHTTP                            SAPMHTTP                               13
    %_HTTP_START

    Hi Kim,
    Please try the following:
    Try to reactivate the component
    If this does not help, please create an OSS ticket and the SAP colleagues will help you to fix the problem. Please add exact information about the component and open a connection to your system.
    Ciao, Regina

  • Offset Path in AI CS4 added overlaping unnecessary anchor points.

    Offset Path tool in AI CS4 offen added some unnecessary anchor points, these points were hard to find because they were overlaping. But when these path were used to blend, faulty effect come. I must remove them manually. It never happened in AI CS2.

    > You could use a script to find and remove these points (JET?).
    A script could search for and remove
    coincident points. But in my experience with the problem in CS3, the abberant results of Outline Stroke, Offset Path, etc., are not consistent enough to reliably correct with a script. In some situations, the redundant points do not have identical handles. How would a script know the right handles to retain? In other situations, entirely extra trash paths are created (as when outlining strokes of dashed paths--the supposed justification for the whole train wreck in the first place). How is a script supposed to know which paths are correct?
    A proper script solution would be to replace the offset path feature altogether. But that would be a pretty ambitious undertaking.
    No, the dang thing just needs to be fixed. Others (assumed to be beta testers) have reported that it was fixed in CS4. If artilu is correct here, that is not the case.
    Adobe's history has not been good re fixing such bugs during the lifecycle of a major version.
    JET

Maybe you are looking for