Anchor text for images: where insert it?

I see a field for ALT attributes in property bar, but what
about anchor text for you image links? How does one insert that? is
there a filed for that there? thanks

You don't need a hotspot to make an image a link :-)
Highlight your image, and in the PI give it a link. However,
be aware that
you may get a blue border around this image if it is created
as a link - you
need to use css to remove it.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Customisation Service Available:
http://www.csstemplates.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"Fred1000" <[email protected]> wrote in
message
news:eqn2kj$dmm$[email protected]..
> If you are talking about making an image a link, you
need to use the
> "hotspot"
> feature. Click on the image, draw the hotspot on the
image using the
> shapes in
> the lower left side of the property inspector and then
fill in the url of
> the
> link.
>

Similar Messages

Acrobat X Pro: Accessibility Report says No Alt Text for image but there is

I have added the alternate text for images on my pdf but the accessibility report is still giving me errors stating that there is no alternate text. Does anyone have any idea why? I have checked and the alt text is there. I don't understand this.
Thank you.

I assume when you click on the error it is taking you to the location where the error is. Not seeing the document it is hard to tell... do you have a multi-page document and when you click on the error does it take you to the location where that problem is?
There are several things that could cause this problem. The Figure or other tag that contains the alt text must have content. It cannot be an empty tag.
It also cannot have another Tag inside of it containing the content. There must be some actual content directly within the Tag with the alt text, not nested inside another Tag, if that makes any sense.
Or, there may be another Figure Tag that has no content. That, too, will generate an error.
If neither of those suggestions work, if you post the file I can probably find the problem.

How to invoke alt-text for images in a PDF file by Automation

Hi,
Can any one help me?
How to invoke Alt-text for Images in a PDF file using script?
Thanks for looking into this.
Regards,
Sudhakar

What do you mean "invoke" alt-text? If Alt-text is there, then it will be presented to a screen reader.

How to remove alternative text for images in my pdf.

hi everyone,
i was wondering how i can remove the alternative text in my pdf file, that appers when the mouse cursor is on the image?
i installed adobe acrobat pro 9. write all the text in microsoft office word 2007, add the images, create pdf and everythings ok, but this alternative text on the image (the alternative text is file's name, for ex. photo.jpg)
such a carking care.
thank you in advance!!
d.

help me...please. :/

Alternative Text for images

Hello!
I would like to know How to add alternative text to the images in Oracle Portal. And also to each area in an image map. I have tried with ALT="name" but it doesn't works.
Thanks,
Carmen

You can try to create a HTML Template - HTML Content Layout
with the following HTML code and use in the region where your image resides
IMG src="#ITEM.IMAGE.VALUE#" alt="#ITEM.CONTENT.LABEL#" border="0"
Yeannis
Message was edited by:
glazar

Inserting alternative text to images

how can you add alternative text to images? which is text that describes an image when the image function is turned off or in another format for blind individuals. This is a ADA compliance requirement in order to export a document to an accessible PDF.

Pages ’09 v4.3, or Pages 1.7.2 (IOS) do not provide alternative text for images support at this time. For those needing to brush up on alternative text, here is a Wikipedia link.

Alternate text for "Text content"

Hi friends,
I have one doube in postscript language to implement alternate text for "Text content"
Can anybody please help me on this
We have using the below tags for alternate text for images.
[/Subtype /Figure /Alt (Image of Figure 2-1) /StPNE pdfmark
[/_objdef {layoutObj} /type /dict /OBJ pdfmark
[{layoutObj} <</O /Layout /Height 70 /Width 140 /BBox [90 290 250 360]
[/Obj {layoutObj} /StAttr pdfmark
[/StBMC pdfmark
Please share me your comments
Regards,
Jayakrishnan

I wouldn't swear to this, but I think what's happening is the effect is essentially treated as a separate image during export, but as far as I know you have no way to select it to add the alt text or anything else. I don't really do this kind of work, so I could be way off base here.
A newer version of ID might behave better, so you may want to consider downloading the trial for CS4

Where do I specify text COLOR for PcP auto-inserted titles

I'm running PcP on 10.5 and want to change the COLOR of the title text that PcP auto-inserts into my video when I run a submit for approval workflow. Anyone know where the color is defined?

No 10.5 system at hand anymore to check but I am pretty sure the color is defined directly inside the quartz composition that is used by the command in the workflow to compose the title.

How to define alt text for an anchored frame in FrameMaker 11?

What is the procedure in FrameMaker 11 to include alt text for anchored frames? We need to produce tagged PDF output that is accessibility compliant; this output must include alt text for each image in the document that a screen reader can read out.
In previous FrameMaker versions, it was possible to define alt text as follows:
Select the frame and choose Graphics > Object Properties.
Click Object Attributes.
In the Text Attributes section, add your alt text and actual text, and then click Set.
The FrameMaker online help still describes this same procedure, at http://help.adobe.com/en_US/framemaker/using/WSd817046a44e105e21e63e3d11ab7f7960b-7f0f.htm l. However, I see that in FrameMaker 11, what you get on choosing Graphics > Object Properties has completely changed from previous versions, and I cannot see Object Attributes.
Where is the alt text defined for an object in FrameMaker 11?

In the Anchored Frame panel, click on the Object Attributes button.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

How do I place an image and insert a different photo for the "mouse down" state?

I have placed an image within an accordian widget and when I select the "mouse down" area in the states dialog box, i click "fill" in the toolbar and insert the photo i want to display when the image is clicked but this image is "covered up" by the originally placed image and is not seen in my states dialog box.
I have done this before when i made rectangles and placed images in rectangles. But i soon realized that you cannot add alternative text to images in rectangles for some frustrating reason.
How do I place and image and have a different image for the mouse down state?

Hello,
This effect can only be achieved when you use the images as a Rectangle Fill. And as you mentioned it above, you cannot add alternative text to images because it is added as a fill and not as a image.
I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
Regards,
Sachin

Anchor link only for image in table header for sorting

Hi,
I need to implement sorting functionality for datatable.
for sorting header of the table column will have image along with header text.
for this i am using <h:commandLink> and <h:graphicImage>.
But i am getting behaviour as anchor link for both text and image.
deserved behavior for this is only ofr Image.
If any one implemented the same ..please help me
Regards

Try:
Sub ClearKeepWNext()
Dim Tbl As Table, i As Long
For Each Tbl In ActiveDocument.Tables
With Tbl
    .Range.ParagraphFormat.KeepWithNext = False
    For i = 1 To .Rows.Count
      With .Rows(i)
        If .HeadingFormat = True Then
          .Range.ParagraphFormat.KeepWithNext = True
        Else
          Exit For
        End If
      End With
    Next
End With
Next
End Sub
If the tables only have a single heading row, you could instead use:
Sub ClearKeepWNext()
Dim Tbl As Table
For Each Tbl In ActiveDocument.Tables
With Tbl
    .Range.ParagraphFormat.KeepWithNext = False
    With .Rows(1)
      If .HeadingFormat = True Then
        .AllowBreakAcrossPages = False
      End If
    End With
End With
Next
End Sub
Cheers
Paul Edstein
[MS MVP - Word]

Resizing text and images with actions and keeping it resized for the next slides, how to?

Hello everybody,
I searched over the net and in this support section for a solution to my problem, but i didnt find any, so...here I am asking you experts.
Through a particular use of different actions I make a logo "compose" in the first slide of my presentation (the logo is composed by text and images that interact), then in the second slide i make it resize so it goes 50% of its size and moves down like a TV logo, in the corner of the slide, and I want it to stay there for all the lenght of the presentation.
It might be a stupid problem, but I didnt understand how to keep it there, 50% of its size and always in that position. If i duplicate the slide I obviously duplicate the 100%-size-logo, not its 50%-size-version, and if i shrink it in order to make it be 50% of its size the text size doesnt shrink so i have to change the text size manually, but the visual effect is imperfect.
Lets summarize:
slide 1: text appears, image appears, the text and the image move and "compose" the logo
slide 2: the complete logo reduces its size to 50% and moves in the lower corner of the presentation, in the place I want it to be for, lets say, 20 slides
slide 3: i want to have this logo already reduced in size and in its position, in the right lower corner, but if i try to group the different parts of the composed logo and i try to squeeze them the font doesnt change its size, I only squeeze the area that the text occupies.
Some help please guys?
Thanks in advance,
Dom-
(add: the problem is kind of similar to this: https://discussions.apple.com/message/9179367#9179367 . the idea of making a slide that contains the logo and text in the exact positions they would be after the move and scale actions is good and that was my first attempt, the probem is that it looks impossible to me to create a second "little" version of the logo that looks exactly the same of the first one that i reduced, so i hope there is some way to tell the app to use "the first logo, only resized the way i want", and thats the point where the problem with the size of the text comes out)

Hi pritam,
The “maintain proportions of window for different monitor
resolutions” property will maintain the proportional size of the front panel
(its x and y sizes) when opened in a different resolution. The front panel
objects will not be resized and will appear larger (and may not fit inside the
front panel) when saved in a higher resolution, and moved to a lower
resolution. You can use the “Keep window proportions” property to achieve the
same results.
To have both the front panel dimensions and front panel
controls scale, you need to have both the above property and the “scale all
objects on front panel as the window resizes” selected. The labels will not be
resized by this.
I tried using both properties on two monitors and noticed
that the change does not occur when the resolutions between the monitors are
different. I had to lower both monitors’ resolution to see the change work
properly.
Please post back if you have any questions. Have a great day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments

Alt text of image tooltip not showing for some cases

Hello,
I have followed the following steps in adding the alt text of images. Adobe Acrobat X Pro * Add alternate text and supplementary information to tags
However, there is a weird case where the tooltip of the alt text is not shown on hover for a specific page (page 5 of the attached PDF)
http://s000.tinyupload.com/?file_id=63161349344665038065
Please advise if there is something wrong with the PDF that is causing Reader to not show the alt text for the images in that certain page. (and if the PDF should be fixed or is Reader the one that has a problem).
Thanks

RamaRao.G wrote:
I added a JInternalframe on south side of a JFrame.Well, that's plain wrong. JInternalFrame is meant to be added to a JDesktopPane.
I added mouse listeners to JFrame. In mouse release I am placing one image at mouse release x,y location by following statement.
g2.drawImage(bitmapImage, x, y, w , h, null)
Problem is when I do mouse release just near to JInternalFrame component which added south side of main Jframe.
showing some part of image on south panel for a sec and then going back. Directly It should to go back side JFrame .
It should not appear on JInternalFrame even for fraction of sec also.To get better help sooner, post a [_SSCCE_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
db

How to change Alt text for the Popup Key LOV Image in Apex 3.2.1.00.10

we are using Application Express version is 3.2.1.00.10
There is an icon to click on to popup the lov search box, the alt text for that image is currently "popup Lov"
would it be possible to change the text to something more meaningfull e.g. "Lookup Person name" or "search Directory for Person names" .
I have tried by updaing them
from
Shared Components>Templates> Popup List of Values Template > Popup Icon Attr --> width="13" height="13" alt="Popup Lov"
(under Popup List of Values)
to
alt="#CURRENT_ITEM_NAME#"
it didn't work.
your respone will help getting accessability sign off

Venu,
Try adding title = "Lookup Person name" to the Image Attributes of your icon or button.
Jeff

Anchor text for images: where insert it?

Similar Messages

Maybe you are looking for