Anchored frame that is run-around AND protrudes into margin?

Hi,
FM 8.04, Win XP.
Is it in any way possible to create a small anchored frame (let's say 10 x 10 mm) that is run-around AND protrudes 1 or 2 mm into the left margin?
I need it for drop caps and have managed everything except the protrusion into the margin.
I can get protrusion into the margin by setting the anchored frame to "Outside column" or "Outside text frame" and then setting a negative value for "Distance from text column" - but then it isn't run around by the body text (despite inserting a text frame into the anchored frame and changing run-around properties).
Any ideas?
TIA,
Mats

Mats,
Unfortunately, you're hitting the limits of anchored frame behaviour.
It's an either/or proposition. You can have run-arounds, but you can't
control the position except for placement at the start or end of a
paragraph.
An alternative, but clumsy and labour-intensive, is to set the start
positions (indents - first & left) of all of the document paratags to
be the desired offset (1-2mm) of the anchored frame. Then by setting
the frame to start at the beginning of the anchoring paratag (not set
with the indents), you will get the equivalent effect.
If this is just going to be a single location and won't be subject to
much editing (i.e. document reflow), then you could also consider
using a graphic frame set with runaround, which you can position
anywhere.

Similar Messages

What is that circle that keeps going around and around

What is that circle that keeps going around and around. I keep getting it when I try to open my email. It takes forever for it to go away

That sounds like the spinning beach ball and indicates your computer is busy. This can be caused by many things, I'd recommend reading the XLabs article about it, you can find that at:
http://www.thexlab.com/faqs/sbbod.html

Once we download it brings up a box that says "Run as" and has User name: Administrator and a box for Password. We can't get past this point. What do we do?

we tried to dowload Firefox and it tried to run..it then brought up the box that states Run as at the top. It says: You may not have the necessary permissions to use all the features of this program you are about to run. You may run this program as a different user ot continue to run the program as the current user.
Current user(Owner-PC\Owner)
Run the program as the following user:
User name: Administrator
Password:
ok cancel

Make sure that you do not run the Firefox directly via the download dialog in IE, but save the file to the desktop and start the installation with a double-click.
You may need to use "Run as Administrator" via the right-click context menu if you do not get a UAC alert.

How do I remove the frame that pops up around boxes I can type in?

I am new to MAC,
For exaple: When on Face book a black frame pops up around the serch box at the top of page and if I scroll down reading post say at the bottom of the page and there is a pic i want to see when I click on it I dont see the pic it flips all the way back to the top of the page where the frame was then I scroll all the back down to the pic click on it again I now can see the pic, any one help? this frame or box may not be the issue.
Thanks
Toddr111

If you have a pascode on your iPone remove it or unlock it prior to conneting to your Mac
This computer is not a computer
Exactly what do you meant with this statement?
LN

How do you paste frames that were created in a symbol into the main animation's timeline??

Hi
I've accidently created an entire short flash animation inside a symbol! I've selected all the frames inside this symbol and copied them into a new animation. When I paste these frames, Flash pastes the animation OUTSIDE the boundaries of the stage. Is there a way to move the entire animation without having to go to every key frame and move it back to the correct location?
When I select all the frames and try to do this it doesn't work and I'm struggling to find anything to help do this.
Thanks
I'm using Flash CS5

Thanks, I have done this and this is what happens (see attached image)
It pastes the frames and layers all fine, but the animation is off the stage. How can I move it back in the correct location?

Is There a Program that can compress tracks and Cds into one long tra

I have a couple long audio books and I would like to have it all in one track.

DSmith: I use?Easy CD-DA Extractor which is shareware, but you simply tick a box to turn all that you rip into one track. This can be the entire CD, or specific tracks that you pick.

Best Practice for Image placement and Anchored Frames for use in Robohelp 9

Hi,
I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9. I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of the anchored frame so that my text flows correctly around the image. Everything looks good in Framemaker! Yeah! The problem is that when I link my Framemaker document to Robohelp, the text does not flow around my image in the same manner. On a couple of Robohelp screens the image is running into the footer. I'm wondering if I should be using tables in Framemaker in order to get the page layout that I'm looking for. Also, I went back and forth...is this a Framemaker question or is this a Robohelp question. Any assistance would be greatly appreciated.

I think Jeff is meaning this section of the RoboHelp forums:
http://forums.adobe.com/community/robohelp/robohelp_framemaker

Best Practices for image layout and positioning using anchored frames in Framemaker 10

Hi,
I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9. I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of the anchored frame so that my text flows correctly around the image. Everything looks good in Framemaker! Yeah! The problem is that when I link my Framemaker document to Robohelp, the text does not flow around my image in the same manner. On a couple of Robohelp screens the image is running into the footer. I'm wondering if I should be using tables in Framemaker in order to get the page layout that I'm looking for. Also, I went back and forth...is this a Framemaker question or is this a Robohelp question. Any assistance would be greatly appreciated.

I wish I could offer some advice, rather than simply adding to your question. I think there is something odd that happens with anchored frames.
I have been going through fits trying to figure out why the placement of my graphics shifts when I run them through Frame 10-to-RoboHelp 9 conversion. The placement in our books is flush left to the body text area. However, when they convert, some are flush left, some are centered, and a very few are flush right. My boss is very unhappy with me, as I have been unable to figure out why this is happening. I didn't create these files, so I don't know if it's something that goes back to how the graphics were initially imported. But I can't figure out why everything looks right in Framemaker, with the frame attached to an anchor tag, etc. but the placement goes hinky when they convert.
Any insights are appreciated. I'm wondering if it's going to come down to deleting them and recreating the graphic frame.

Very disappointed with Motorola Razr M AND VZW Run Around

I got the Motorola Razr M last December. I picked the Motorola M because it was a nice compact size without compromising screen size and Motorolas are very durable phone....or so I thought. I have had nothing but problems with this model phone. I am on my 6th replacement. I have had software problems and hardware problems. Two "certified" replacement phones have had hardware defects upon being sent out to me. The rest have had numerous software problems. Verizon has been good about sending out replacement phones since I was under my 1 year manufacturers warranty..until this week when I asked if i could get a different phone sent out since this models seems to have so many problems. I got a major run around and no follow up by a "management supervisor" who told me she would work directly with me to resolve the situation...she even gave me her direct number but ended up not being her number when I tried to call back. I am not pleased with the way VZW has decided to handle this as I have been a loyal customer for 11 years. I do blame the reps...I know they are doing their jobs with the boundaries that are set for them. I just want a phone to work for the remainder of my contract with VZW. I even tried to contact Motorola and they said since I bought the phone through VZW I had to work with VZW for replacements. SO VERY FRUSTRATING!

You have actually helped me with a decision that has been driving me crazy for the past week. I do not need nor do I want all or most of the above you mentioned. Heck I hardly use half of that stuff on my home computer or I-pad. I will definately stay with my basic phones that I can get calls, texts and take pictures. Thanks again.

CS3 / javascript / Creating anchor frame and placing xml element

Hi All,
I have a problem with creating anchor frame, that is
Actually i have created anchor frame, but it is not allowing to place the xml element, it shows "inline frame xml elements not allowed" some thing like this.
I have handled anchor frame type is "custom" but it shows "inline frame".
Any of you got better idea about this.
regards,
sudar.

I believe this has to do with you doing a placeXML, where the XML contents does not match the tagged frames in the document.
Again i'm not sure, but i dont think this has to do with what kind of frame you are placing into(inline or custom anchor) rather if your tagged frames and XML match up.
Perhaps this link will help:
http://forums.adobe.com/message/1111773

How to use anchored frames in side-by-side flows?

Hello,
I'm working in a bilingual document with two side-by-side flows and I cannot find the way of adding an anchored frame that runs accross both columns (to host a graphic for example).
I could manually split the flows after the required line and add a frame between them but this document is revised every couple of months (adding and removing big amounts of text) and it would be too time demanding.
Do you have any tip for me?

The anchored frame will only affect the content in the flow that it is placed in. So, if you have a two-flow document, an AFrame placed in one column will never affect the content in the second flow. A graphic frame that spans both columns and has a runaround property will cause text to break around in it both frames. However, the graphic frame is tied to a location on the specific page and doesn't float with content changes.
If the the content in the two flows is spatially synchronized, i.e. each paragraph in both flows starts at the same baseline location, and the graphic is common to both, then you could just use an anchored frame in each column anchored left/right to create a 100% overlap and place the graphic in only one of these.
Alternatively, you could use a graphic frame across both flows and create a script that automatically re-positions a graphic frame, perhaps tied to a unique marker in both flows as the proximity indicator.

Anchors above anchored frames

Hi all,
I'm developing some templates for computer software manuals. I need a nice neat generic method for adding images and their titles. I need the figure titles to be positioned in the side heading, aligned with the top of the figure beside it.
For tables I use a TableTitle side heading paragraph format that has a Table paragraph format after it with a negative space after value. The table format has a negative space before value, so when inserted it lines up nicely with the top of the table title.
I would like to do something similar for figures, but I can't seem to find a method of positioning the anchored frame that works. 'Below current line' would be ideal, if that didn't leave me with the line holding the anchor above it, which the side heading is then aligned with instead. Is there a way to apply a paragraph format to the anchored frame that would allow me to enter a negative space before value like i do with the table? Or is there some other way to align the anchored frame with the top of the title beside it?
Thanks very much to anyone who can help,
Kat

Kat,
I hope I understand your problem correctly.
The paragraph containing the figure title is positioned in the side head with alignment set to Top Edge. Then that paragraph is followed by another paragraph, which of course is in the main text column, empty, and aligned at the top with the side head.
With the insertion point in the second paragraph, import the image file. This puts the image below the line. Select the image, not the anchored frame, and scale it if necessary. If not created at the correct size, you probably want to scale it down to fit the width of the text column. Now press the key sequence Esc, m, p (note m and p are lowercase). The anchored frame shrinks to fit tightly around the image and changes it position to At Insertion Point. If you turn on Text Symbols, you will see the end-of-paragraph symbol at the lower right edge of the image, and the top of the anchored frame will align with the TOP of the side head text.
You also have to be sure the line spacing of the paragraph holding the image is NOT fixed or Frame will move the image up.
Hope this is what you need,
Van

Paragraph style including anchored frame possible?

Hi,
I'm working on a new template and can't get a specific paragraph style to work correctly.
The page layout is a 1/3 to 2/3 page column layout. The 1/3 page column is called a "Marginalia"- column in German, sorry don't know the term in English. All graphics are in the 1/3 page column, while the text belonging to it is in the 2/3 page column. I need a paragraph style that contains an anchored frame as a placeholder for future graphics in the 1/3 page column and its corresponding text in the 2/3 page column.
I've set up the page with only one text frame which is the width of the 2/3 page. The left margin of the this text frame is the left margin of the running text. All graphics are placed to the right of it.
Can anyone tell me if this is possible and how to best go creating such a paragraph style?
THANKS!

Paragraph styles don't include an anchored frame attribute. You can include an anchored frame in any paragraph (though off the top of my head I don't know a way to insert one automatically -- perhaps it would be scriptable), and you can assign an object style to the anchored frame that contains all the positioning information as well as any text styling or graphic fitting information you might want to use.

How to link a text box to an anchor frame in the master pages?

Ok, as the title states, we are trying to figure out if it is possible to link a text box to an anchor frame in the master page. When you look at our Master Page layout, we have a text box in the upper left hand corner of the left hand page, this is used for our machine serial numbers. Then we have an anchor frame that automatically fills out the figure number. Let's say I have pages 2 & 3 (left & right), they have a S/N at the top of the page for the machine, then pages 4 & 5 have a different S/N. If I have to add more pages in between pages 2 & 3 (bumping the current 4 & 5 to 6 & 7), the anchor frame bumps to the next page, but the S/N text box doesn't. Is there a way to fix it so that they both move to the next page? Thanks for the help.
P.S. I can include images and other info if needed.

I have included a two pictures that should help me explain.
Master Page:
This is the master page set up, the "Page Text Box" has the flow set to "B" while the S/N text box has the flow set to "A". This setup is for our parts manuals, the left page is usually an illustration while the right page is usually a parts list. The text box, anchored frame & paragraph tag are empty in the master page set up. The "page text box" has a flow of "B" and the "S/N text box" has a master flow of "A".
Body Page 1:
When we create new pages, the paragraph tag automatically fills in the figure title on the left page, then we add an anchor frame within the text box to hold the illustration. You will notice that I added in a "test" serial number at the top of the page. Now if I need to go back and add two pages before this, the anchor frame, illustration and parts list will move to a new page, but the S/N text box will not. The "Before S/N TBD" would stay on the original page.
This is what happens, the text box containing the illustration and the parts list "bump" to the next page, but the S/N text box does not. So the question we have is there a way to link that text box to the page so when we create new pages the S/N text box moves with the illustration.
Does this help?
Thanks for the assistance Error7103.

Converting All Figures in Anchored Frames With Callouts

I need to take a few hundred linked graphics in anchored frames that have FrameMaker callouts,save them as PNG files with the callouts embedded (yes, I know I won't be able to edit the callouts later) using different names (or another location), and relink to the new graphics. Doing this one by one is doable, but suboptimal.
I'm not sure if I need a script, some other tool, or if there is some easy way I am missing. Anyone else have to do this and can give me a pointer or two?
Thanks,
Marc

This isn't a full solution, but does reduce the workload.
Using Acrobat Pro (possibly Standard, probably not Reader),
use the Document > Split Document feature set to:
(*) Number of Pages [ 1 ]
and:
Output Options:
[*] Use Label [ Page ]
The file names won't be your image IDs, however.
This gives you the original PDF as single file per page, which dramatically enhances options for batch processing with other apps.
For example, you could use PhotoShop to batch convert those .pdf's to .png's, with full control over res. Illustrtator can also do this (File > Export), with res control.
You could actually re-import those page images back into the FM doc, using Graphic Frames (clipping paths) to hide all page content except the desired images.

Anchored frame that is run-around AND protrudes into margin?

Similar Messages

Maybe you are looking for