Ancient Messages

Over the past few days we have been suffering a problem were very old messages are reappearing on our XI system.
It seems to happen at the same time each day - around 17:05.
The messages are all idocs from our R3 system but have not been sent from there on that day, and have not been stuck in the gateway (sm58) as far as we can tell.
Most of the messages are 7+ months old, and cross checking with what we have processed previously, they appear never to have been processed in XI.
Is XI storing messages somewhere and then releasing them?
If so, how can I find these messages and 'remove' them?
Also how do I stop XI storing them? The whole idea is to process them immediately, not store them away for later.
Regards
C

This affects a number of scenarios, all of which are using standard idoc processing.
What I want to do is find all the messages that appear to have been stored on the XI side and are unprocessed.
When I go into sxmb_moni and look at the messages that are coming through, they contain data that was created many months ago. However when I look at the earliest runtime it shows todays date.
I am assuming that the messages are getting stored somewhere in XI, and have now been released.
How can I find anyother messages that are in this state?

Similar Messages

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. Help!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

Is following message due to 'Java' setting left unchecked? Mac OSX supportsUser Authentication Mechanism (UAM) plug - ins from other manufacturers to control access to servers.To use a UAM, copy the plug - in to: Library/ Filesystems/ AppleShare/ Authenti

Is following message due to 'Java' setting left unchecked?
Mac OSX supportsUser Authentication Mechanism (UAM) plug - ins from other manufacturers to control access to servers.To use a UAM, copy the plug - in to: Library/ Filesystems/ AppleShare/ Authenti

Man that is an ancient message.
The last time I saw that was using Mac clients connected to a Microsoft (Windows) Server running 'Services for Macintosh' which included the ability to act as an AppleShare compatible file server. Because Microsoft have a different security system for defining accounts which includes the 'domain' as well as username, the standard Mac AFP client did not know how to send that information.
Therefore Apple made it possible to installed a plugin in the form of a UAM or User Authentication Mechanism which added the ability to send this information to login to the fileserver.
See http://support.microsoft.com/kb/101747
However Microsoft have long discontinued 'Services for Macintosh' and now the only way for a Mac to connect to a standard Windows Server is via SMB not AFP. I don't believe this plugin is available to download anymore.

Creating dual monitor workspace

I found one ancient message from September with absolutely no responses, so let's try again.....
Bridge CS4. Dual monitors. HOW do I create and SAVE a workspace that takes advantage of both monitors? I want to put previews and some palettes on one monitor, and the rest on the other. But, I don't seem to be able to save the whole thing so it's the default setup.
How do I do this?

I don't believe you can. I do think the save workspaces feature is that
smart or goes that far. At least when I have tried creating a dual monitor
workspace and save it, it never comes up like a created it. I think what the
problem is that when you create that secondary window for the other monitor
it isn't just a window created by the main application but a second light
copy of Bridge loaded in to memory so when you close bridge that is lost.
This has been an issue since they added workspace capabilities to Bridge.
It certainly would be nice if this worked however.
Robert

I installed an ancient version, photoshop element 2, on PC under Windows 7 after change of computer station and it is impossible to register modification made; error message: impossible because saturated disc ....what is not the case: many space on the di

I installed an ancient version, photoshop element 2, on PC under Windows 7 after change of computer station and it is impossible to register modification made; error message: impossible because saturated disc ....what is not the case: many space on the disc. How to repair this error please?

Hello
Thank you for your answer which is interesting because it is a disk of 2 TB... If I create a partition do you think it can solve my problem? I prefer this old version of Photoshop, very practical to use...

Attempting to upgrade to Firefox 3.6 (using an ancient Mac OS 10.3), but received an error message (corrupt image file) when downloading - any way to correct this with my current OS?

I'm currently trying to update a few programs on my good old (VERY old) Mac Powerbook, but I ran into an error when downloading Firefox version 3.6...I'm currently running Mac OS X 10.3.9, which isn't compatible with the most recent versions of Firefox (or anything, for that matter), but it should still allow an upgrade of version 3.6; however, once the file finished downloading, an error message popped up indicating there's a corrupt image file. Is there any way to work around/correct this problem, or am I stuck with my old version of Firefox until I bite the bullet and upgrade my OS??? Any help is greatly appreciated!!

Firefox 3.6 requires at least OS X 10.4, the last version of Firefox that runs on OS X 10.3.9 is Firefox 2.0.0.20 available from https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/

Neither my ipad nor iphone will sync with itunes on my pc. it says i need a newer version of itunes but when i download the latest version i get the same message.

I can't get my iPhone 4s or my iPad 2 to sync with itunes on my pc. My very ancient ipod nano works fine. I get told that the version of itunes is too old. I have tried on 3 occasions to download the update, and while it doesn't say there has been a problem with the download I continue to get the same message. I do get a warning that itunes is not properly installed and that i won't be able to burn cds. I have tried uninstalling itunes completely and reinstalling but that doesn't work either.
does anyone know what I'm doing wrong?

Have you run windows update? That could prevent iTunes from properly installing. Also, try with your antiVirus and firewall disabled. What version of Windows are you running?
OS X is the operating system on the Mac.
Message was edited by: ssschmidt

A message from Creative to the Sound Blaster forum participa

We have read the strong feedback about Creative's forum post regarding driver development by Daniel_k and other outside parties. Creative's message posted on our behalf by our Company spokesperson tried to address our concern about the improper distribution of certain software which is the property of other companies. However, we did not make it as clear as we would have liked that we do support driver development by independent third parties. The huge task of developing driver updates to accommodate the many changes in the Vista operating system and the extensi've testing required, including the lengthy Vista certification requirements for audio, makes it very difficult for Creative to develop updates for all past products. Outside developers have been very helpful to Creative and our customers by developing updates for many of our Sound Blaster products, and we do support and appreciate these efforts. This however does not extend to the unauthorized distribution of other companies' property. We hope to work out a mutually agreeable method for working with Daniel_k in supporting his efforts in driver development. Going forward, we are committed to doing a better job of working more closely with third parties to support their development for our products and our customers.

May I be the first to say:
Thank you for finally responding. :smileyvery-happy:
It may be the beginning of repairing Creative's unfathomably huge PR snafu. Hopefully you guys can pull this one off, starting with this thread. If you can actually take this and turn the whole company around with it, I'm sure many Creative swear-offers may once again return to your products. By turning around, I mean:
- Quit crippling hardware with bad (or intentionally bad) software. Yes, other companies (like nVidia, Intel, AMD, etc...) do this to maintain low production cost, but when it does work, it works well, and their products are branded as "lower priced alternati'ves". Everyone's seen unpopulated component pads on hardware boards, which entices people to want to buy the full featured version. But doing it between operating systems is absolutely ridiculous!
- Support the driver community. Drivers dri've hardware. No drivers, no hardware! Concentrate as much effort on your drivers as you do your excellent hardware, and you will have a high quality product once again. I still love that the old ISA Sound Blasters often had built-in speaker amplifiers. That's a mark of quality and creativity. Hopefully you can do it again!
- Rethink your corporate strategy. Everyone now knows about Creative's history of buying up companies to stifle competition... you've got to quit that stuff. It may give you more capital, but doing it in a Microsoftian fashion is just bound to get you bad press that your company isn't Microsoft-sized enough to handle. Again.
- While Windows Vista may be the worst operating system in existence, that in no way gives you the right to refuse support on older hardware when it's darn well capable of being supported. nVidia and ATI are shining examples of this - they still support their most ancient of hardware in the newest operating systems. That's what's given me the ability to put [url="http://nliteos.com">nLite[/url]ned versions of Windows XP on darn near every computer I come across, and make it run better than ever. You need to quit spewing out excuses and start spewing out working drivers.
- And for crying out loud, your driver self extractor is atrocious. It doesn't need to rattle off the CRC as it computes each byte. I can't be the only person that is annoyed by that
With that, let's see the news flow right on in.
Message Edited by FalconFour on 04-0-2008 09:58 PM

"Error:Out of Disk Space" message. Why?

I've been using an Apple G4 with FCP2 to capture footage through a Sony DSR-11 deck. I've set up a LaCie 500GB 7200, with most of its 500GB available, as capture disk. As late as last summer I used this system to capture 70+ hours of footage which was then edited on another system.
This time I've met only problems. I've tried capturing 5 different DV tapes. They seem to be capturing but at the end of the hour I get the message "Error: Out of Disk Space".
Does anyone know why this might be happening? I've checked the set up and everything seems in order. (These tapes are 4:3, the ones captured last year were 16:9 DV, so the only adjustment I had to make was un-checking "anamorphic".) I even tried capturing to the MAC hard drive to see if the problem was the LaCie drive, but I get the same same message. (The LaCie I've been using had been full with last year's capture scratch and the disk had been erased through LaCie's Silverlining program, so for a while I began to think that this may be the problem; that maybe I'd have to reformat the disk, etc. but this test seems to rule that out.)
Thanks.
John

Since I last wrote I’ve changed hard drives, run tests on them, as well as trash my preferences, which I did earlier. Still, if I try to capture a tape (to disks with up to 460 GB available) I get the message “Error: Out of Disk Space”. The only thing I can think of doing now is deleting and then reinstalling the Final Cut software.
Here I’m kind of dumb and don’t want to make any mistakes. This Apple has been a stand-alone computer used only for Final Cut and the software was installed when I got it. The rest of my life has been conducted on a PC. So is there anything I should do before deleting Final Cut? Should I be doing anything to protect exiting project files, captured clips, thumbnail cache etc.? Will Final Cut just recognize these when I re-install? What do I do? Just open the Mac hard drive, identify the Final Cut application and drag it to Trash? Do I need to empty the trash first or should I leave it there for safety?
I look at the instructions that came with my ancient Final Cut 2 disks. Here’s what they say in full:
To install QuickTime, follow these steps
1) Insert the Final Cut Pro CD in your CD drive. (I see I have two disks: one “Final Cut Pro 2”, the other “Final Cut Pro 2:Tutorial Media” Do I need to install the second?)
2) Double-click the CD’s icon, then double-click the QuickTime Installer folder.
3) Double-click the QuickTime Installer icon and follow the onscreen instructions.
4) When the Choose Installation Type window appears, select Custom, then click Continue.
5) In the next window, click Select All, then continue
This replaces any previous versions of QuickTime and ensures a complete installation of all components required by Final Cut Pro.
6) When a message appears saying installation was successful, click Restart.
Is this all straightforward or might there be any potential pitfalls in the above instructions for someone unfamiliar with installing software on a Mac (In my case old software and an old Mac – a G4)? I guess I should also ask if you folks out there agree that re-installing Final Cut may be the answer to my problem, that this error message is the result of a glitch that has arisen in the installed version of Final Cut.
Thanks in advance for any help.
John

I'm trying to move messages from Mozilla to Thunderbird as Mozilla is no longer compatible with 10.7

I don't know how to move my messages from Mozilla to Thunderbird.

Mozilla what? as there is Mozilla Firefox, Mozilla Thunderbird and the ancient Mozilla 1.7.x suite along with other Mozilla products and projects.
If you are referring to the Mozilla suite then perhaps look at SeaMonkey which is a community effort in keeping the suite going. http://www.seamonkey-project.org/

Error message: "iTunes cannot read the contents of the iPod."

I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...

My suggestions, when Restoring the iPod.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
Disconnect all other USB devices, except the mouse and keyboard.
Stop all other programs except iTunes.
Good Luck!

HT2736 I'm trying to send a tune as a gift but, every time I fill out the info, and press "continue", I get a message that my session has "timed out".

I'm trying to send a tune as a gift but, every time I fill out the info, and press "continue", I get a message that my session has "timed out". I didn't take me over a minute to fill out the form. How fast does one have to be!?

Well, first, why are you running such ancient versions of Firefox as 3.6? i would immediately update to Firefox 15.0.1 as Firefox 3.6.28 is no longer supported and is critically insecure.
As for the dreamweaver thing, I'm not sure this is a Firefox issue, so I'd check again after updating Firefox.

Error message when trying to set up shared printer

I can't seem to add my ancient agfa imagesetter to my list of printers. The rip software is running on an old mac running system 9. I've tried typing in the printer's IP address, but that doesn't work either.
So I thought I could work around that by sharing the printer from my G5 which is running system 10.4. So Mountain Lion now sees my agfa in the shared printer list, but when I go to add it, the error message is "Unable to download the software from the server at this time."
My best guess would be an issue with sharing permissions, but I am open for suggestions. I can't add any of the printers from the shared printer list, so it is not my agfa that is the problem with my workaround solution, it is a "sharing" problem with my G5.
Ideally, I'd like to print directly to my old rip, but if I can't, if anyone can help me solve the "sharing" puzzle, I would greatly appreciate it!!

If you are using LELA delete it from your computer. It is not needed. Connect viw your wired computer to 192.168.1.1 username blank password admin (or whatever you made it) and configure your router manually.

GeneIOUSBIDE.kext error message

When installing updates or software I often get the following error message
"/system/library/extensions/GeneIOUSBIDE.kext was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update"
Where does this file come from - the error message keeps appearing - the Apple Store has been no help

Unless you are connecting your mac to an ancient drive or device that does not have a USB jack, you will never need this... Just delete it, it does no harm to do so. This system extension is not even needed on any Intel based mac because support for the cable, example linked to below, is provided by OSX. You can safely go to System/Library/Extensions and remove GeneIOUSBIDE.kext. If you are leery of doing that, Just keep a copy of it somewhere so you can reinstall it if you think it caused a problem.
Here is what the cable looks like that this Extension is supporting, so you can see for yourself if you will ever really need to have this Extension installed.
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=14727 97&Sku=C250-2288&SRCCODE=CNETFEED&CMP=OTC-CNETFEED

My send messages are not being captured. all you see is the subject line.

After February 27, it seems that Thunderbird is not capturing my Sent messages. You can see the subject in the list above the line, but nothing shows up below it. If I put it in Trash, I still can't see it.
I have another mailbox on this computer, and it's working fine.
It's an old Mac (G4) running an ancient system, 10.3.9, and that supports Thunderbird 2.0.0.23
Yes, I know it's an antique, but we need to fix it right now. Please help.

It was the icon after all, and it finally worked. I think I had to clean out some of my sent mail and compact the folders first. Thank you very much.

Ancient Messages

Similar Messages

Maybe you are looking for