And black.

I have a new Ipad2 and bought an apple SD card reader to put my photos onto my Ipad. I down loaded my photos onto the card and inserted into the card reader and installed it into the IPad. Nothing happened at first and then everything went black and I can't get the Ipad to turn on again. Is there a quick fix to this or is it defunked already.,

Have you tried a reset - press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear (you won't lose any content, it's the iPad equivalent of a reboot).
As a slight aside, In terms of the card reader, if you are copying the photos onto the card yourself, then for the photos to be recognised you need to create a directory called DCIM off the root of the card with the photos underneath it (and the photo filenames need to be exactly 8 characters long, no spaces, plus the file extension)

Similar Messages

The screen on my ipod touch is white all over and black in the upper right hand corner only with color dots and lines run to the left hand side but stop in the middle. how do i fix it?

right now it is the middle of april and i bought the ipod at the beging of Agust the year befor so it still has not been a year. currently it is thursday and the screen changed to the white and black corner on the monday earlier in the week (so 4 days ago). i had just broken up with my gril friend and we were fighting. in anger i through my ipod at the wall. i was aiming for my pillow on my bed so it would hit something soft but i missed and it hit the hard concrete wall in my room. when i looked at my ipod it had turn itself off and when turn on the screen was white with a little black in one corner. i have tryed to restart it by holding down the power and home button till it restarted but the screen only got brighter and then eventually went back the the brightness it was before and turn off. i can still turn the screen on but cant unlock. i know it is still working cause my alram still goes off in the morning. the ipod is a 4th generation ipod touch 16 GB memory and is black. can this be fixed at home on my own or do i have to take it in to apple. can apple even fix it or is my ipod past the point of repair. any advice would be nice. thanks in advance.

- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $99 fr a 16 GB 4G. They do not fix yours.
Apple - iPod Repair price

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My secondary monitor flashes and blacks out after the 10.7 install. Any ideas on how to fix this?

I have installed 10.7 and the secondary monitor flashes and blacks out. I downgraded back to 10.6 and the problem went away. I reinstalled 10.7 and the same problem happened again. The monitor blacks in and out especially when the pointer is placed in the dock area, but it still happens all the time. My secondary monitor is a ViewSonic 22 inch that is connected to a DVI to display adapter. Any solutions??
Thanks

Talked to AppleCare and it's most likely the fact that my MacBook has 3.0 USB ports and my non official charging cable can't support that. So yeah, I'll try a new cable, hopefully that's the fix.

Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store.

Freezing iMac G5 with random red and black pixels, HELP!

Hello all, and thanks in advance for helping. Here's my dilemma: I have a 20" iMac G5 that I have been using for 2-3 years or so. I recently started doing less work on it, as I replaced it with a new 24" iMac, so now it is used for one or two programs as well as occasional internet use. The system began to become slower, then finally started freezing between minimal tasks, even something as simple as pressing TAB in Safari, to trying to make a new folder in iPhoto. We restarted a bunch of times, and even tried clearing the PRAM. Now, it freezes during the start-up and there's little red and black boxes (small, maybe 4x4 or 6x6 worth of pixels) appearing randomly on the screen. When we are able to get the system to start, after one or two small tasks (opening the Address Book, or starting Safari) the program freezes, the pinwheel starts spinning, and I lose any chance to do anything more on the computer without powering down. Any advice or suggestions is appreciated! Thanks and I look forward to hearing from you.

Hi PPRI and Miriam,
Same deal going on here. It's been a while since I last posted - meaning no problems (which is goooood). So here is the issue:
Would stop at blue screen before loading to main screen. Minor repair on HD volume, and now freezes on main screen very quickly, after booting past blue screen. A few wierd pixels are seen, which lets me know that it has frozen.
Here's what I did:
Hardware check with utility - no problems found, including logic board. From the manual, it seems like it is a software issue.
As before, I repaired a few permissions and minor repair on HD volume. Still not working.
Also opened up my vents and carefully vacuumed the dust - fans were spinning hard. Still, not working.
My next step is to do an archive & install. I'm not sure how to backup my files, so this will have to suffice. This leads me to my questions:
Q1 - How do you burn a backup, without an external HD and without being able to get past my main screen?
Q2 - I noticed a post before this one, concerning the same issue, with Miriam posting on it. Is it overkill to post the same problem/question in another thread in order to maximize the chances for a good response? Any suggestions Miriam?
Thank you for being so helpful. Apple community rocks!
(PS - will let you know how the archive/install goes. If it doesn't work, I may pay to back my files on disc, and then I'll try reformatting HD altogether. Again, will let you know how it goes).
(PS2 - Not sure if this matters, but my imac was one the ones that needed the free extended warranty for the capacitor issues - identified by the serial numbers. Doubt that's the problem since it was working fine after repairs).

I bought a macbook pro retina ME665 in Dubai, and 3 month later its display stopped working properly.some white lines appeared on it and display itself became white and black. Can anybody suggest what should I do to fix this problem?

In October 2013 I was on Vacationin Dubai and bought there Macbook pro retina ME665. I returned to Kyrgystan (home town) and for New Year I was away for a week. When I came back i found that the dispaly of my laptop became white and black, some lines appeared on it. Everybody in my family told me that no one has dropped my laptop or done anything that can cause this problem. there is no any service provider of apple in my country. WIl, the international warranty cover this case? I bought this laptop not from apple store,but in a simple store and I lost reciept.

Put the Serial Number in here...
https://selfsolve.apple.com/agreementWarrantyDynamic.do
to see if it is registered with Apple..
And see here for Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57

My iTunes background has gone gray and black. What did I do and how do I fix the issue?

My iTunes background has gone gray and black. What did I do and how do I fix the issue?

Had the same problem. Go to Users/Library/Preferences. Discard every file that begins with com.apple.iTunes...

Use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... An

Hi...
My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
Waiting for your reply... Thanks and regards...
Turgay Kala
General Manager

Unfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
Here is a list of Apple contacts; there is no email address - you will need to write a letter to their corporate headquarters or call them:
http://www.apple.com/contact/
Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs.

How do I get rid of random screen flicker and black screen when using a late 2013 Mac Pro with a 4k Samsung 55" Display?

I have a new Mac Pro late 2013 and a 55" 4k Samsung display connected using an HDMI cable. For the most part the display is amazing, however, I get occasional screen flicker and black outs. Can anyone help? Could I possibly have a bad video card?

4K displays take more than half the bandwidth of a ThunderBolt Bus. So you may get better results if you are careful to place them on their own Bus. This article has the explanation of which port is using which Bus:
Mac Pro (Late 2013): Using multiple displays

White and black vertical lines

I Have the iPhone 5. It has been in a case since the day I bought it. It is 2 months out of warranty and I got white and black vertical lines while I was laying in bed. My friend tried checking my screen and replaced it with a working screen and it did the same thing so it wasn't the screen. Took my phone to Apple they said it's the screen and I have to pay $130 to fix it even with it out of warranty..... Lady standing next to me had the same problem they plugged it in fixed it and she was on her way with it. What is wrong with my phone? What should I do?

and one more thing, itunes cannot read my device i did that for 20-30 sec but it won't turn on

Premiere Elements 13 Eyedropper for white balance, gray, and black NOT WORKING. Help!

I'm using Premiere Elements 13.1 on an iMac, and trying to adjust the white balance on a clip with ZERO success. The main reason for this is that I cannot utilize the "eyedropper" selector; I know what should appear white, gray, and black, but cannot select those items.
In the Three-Way Color Corrector there are Eyedroppers to use to specify areas of known color range. I have tried without success to select ANY of the eyedroppers...
I have clicked on it - NOTHING
I have held the left mouse on it and attempted to drag it onto the frame - NOTHING
I have right-clicked it - NOTHING
The eyedroppers are not greyed out and they do respond when clicked. I have hit Reset button galore. I have restarted the program.
I have held my mouth funny - NOTHING :-)
When my cursor is hovering over the tool, it changes to an eyedropper. If I click, nothing happens when the cursor is moved - the cursor changes right back into its regular arrow shape. The cursor does nothing to the image if an item is clicked....there is no change to anything on the monitor.
I am a longtime Photoshop user but new to Premiere Elements. This dropper seems to work nothing like the PS ones. In fact, it doesn't work at all...so far.
Can someone please tell me what I need to do to simply select the eyedropper and take it onto the image and select the white (or gray or black)??? Before I go bananas (may be too late)? THANK YOU!

Still not working. I think the root cause of the problem is the mechanics of using the tool itself; I hope this screen shot shows up below ...
Here I have APPLIED EFFECTS open, and have selected Midtones (Greys) to be expanded so that the eyedropper and other details appear:
Now, just below where it has a box and "Impacted frame area in white" (which I know is a checkbox allowing the area effected to be seen), there is a little color box and an eyedropper.
What EXACTLY do I do to select (activate) the eyedropper and subsequently tell the program what I feel should be grey in the selected clip?
As mentioned before, I can click it and the cursor briefly changes to the same shape as the eyedropper. But as soon as I move the cursor a fraction, it changes back to an arrow (normal cursor) shape. Even then, going to the area I need to select in the image, and then clicking it, does exactly nothing to the appearance of the image shown -- even if the colors start way off. No correction at all. It is as if the tool does nothing. The color wheels below all this DO work however - it's just the eyedropper that doesn't do anything. This just cannot be Adobe's intention. I am convinced there must be some flaw in how I am selecting the tool itself. And the user guide - needless to say - is worthless in explaining the mechanics.
So very frustrating. This appears to be the only thing wrong with the program - nothing else seems amiss.
NOTE: To add insult to injury, this promised white/gray/black balance feature and the three-way-color corrector is the SOLE REASON I purchased the software. Funny.

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.

Iphone 6 plus screen flashing white and black

My iPhone 6 Plus 16Gb suddenly started to show screen artifacs, like flashing with white and black, so I can't see the springboard only black and white screen. Restart of the phone didn't help. Even when the phone is booting, Apple logo doesn't appear and then again flashes. As it seems on background everything is working, as I can receive sms and phone calls. It is just the screen. iPhobe 6 Plus is brand new, I've been using it for 1 week and it never dropped. No physical damage, no nothing, just flashing

Have you tried a Reset by holding down the Sleep / Wake Button and the Home Button at the same time until the white Apple logo appears, then let go of the buttons, but wait until the Reset completes and you are back at your lock-screen? If this doesn't work then do you have a computer with the current version of iTunes? If yes and you already have a Backup of your Media and Data on iCloud or iTunes, then you can put the iPhone in DFU Mode. Don't do this unless you have a Backup and also have a computer with the latest iTunes. You will need your Apple ID and Password. To go to DFU Mode you can hold the Home button while you plug the Lightning Cable into the iPhone, a graphic will appear on the iPhone screen showing that you need to connect to iTunes. At that point just connect the iPhone via the Lightning Cable with USB into your Computer. Open the iTunes App on the Computer and wait until a button appears representing the connected iPhone. Then click on the iPhone button on the iTunes screen and it should open to the Summary page. At that point you can Restore the iPhone to Factory Settings and bring it up as A New Phone. The iPhone should screen should then show Hello and you will need to connect to your WiFi via your Router WiFi Password and then answer all the question put forth by the iPhone. When the "Lets Get Started" occurs you can thoroughly check out the iPhone to make sure it is all OK. When satisfied that things are good, you can plug into the computer and iTunes and this time Restore from Backup. or if you Backup is in iCloud you can Restore over the air.

Is there a way to convert a Word document with Red and Black into Spot colors in Acrobat X?

Customer sent us PDF files created in MS Word. Of course, Word creates CMYK versions of colors. I need the red text and black text converted into spot colors for 2 color output on press. Is there a way to do this? I saw another thread that said there is a Fixup in the Print Production/Preflight section of Acrobat X that has a convert to Spot, but I'm not seeing that. All I see is Convert to CMYK. I'm using Acrobat X 10.1.13 on OS X. Any help would be appreciated. He also sent the Word docs so I can drop that into InDesign and reformat the whole thing and fix the colors myself but if I can do it in Acrobat, that would be a lot quicker. Thanks!

Frequently in this scenario the red will be 100% of either magenta or yellow with 0% black. In these cases you can merely plate the Black & Magenta (or yellow) for press.
I've created a Preflight Fixup on occasion for these also.
An example shown - Note it requires the document is cmyk. MS Files will be rgb. You could create a Preflight looking for rgb colors.
With Fixup tab selected - Options > Create New Fixup > Type of Fixup - search for Spot in the field

White and black point vs ??

I never know which forum to post these things, so I'll start with the photographers.
 
 These three shots are as follows: (1) the camera raw version, (2) where I moved the sliders from the ends to approximately the beginning/end of the major portion of the histogram, and (3) using the threshold control to find the white and black points in the main part of the picture.
 
 Then, in the two adjusted versions, I lightened the image with the curves control.
 
 In both these cases, I used the grey dropper to touch the same spot on one of the rocks, to get the apparent neutral point.
 
 It seems to me that the threshold method to find the white and black points is preferred, based on the overall color and appearance of the finished adjustment.
 
 But, I've found on some images where the histogram has missing black and missing white, if I adjust the sliders to these two ends, I get pretty much the same outcome, as far as the contrast, color, and grey point.
 
 Could I have some advice on the preferred method to use in handling my image adjustments? Doing it the threshold method takes more time, and sometimes it's difficult to find the white and black points, or even the grey point.
 
 Thanks.
 
 Al
 
 
<a href="http://www.pixentral.com/show.php?picture=1SlEeG9kfwzD34gVOEcCbg7Ktp83p3" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1SlEeG9kfwzD34gVOEcCbg7Ktp83p3_thumb.jpg" border="0" />
 
 
<a href="http://www.pixentral.com/show.php?picture=1tIEs4eAyKz4sxamyVaYRlKjTIIfKj" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1tIEs4eAyKz4sxamyVaYRlKjTIIfKj_thumb.jpg" border="0" />
 
 
<a href="http://www.pixentral.com/show.php?picture=17K3ewFXsGo4K2uH5TGfO06CdVayyn1" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/17K3ewFXsGo4K2uH5TGfO06CdVayyn1_thumb.jpg" border="0" />

Yes the image was purposely underexposed. What I was trying to accomplish was to speed up the shutter speed to remove the slight blurring and compensate by pulling data from the shadows. Even though the lens has an image stabilizer the amount of light wasn't enough for a proper sharp shot.
this image is before touch up
These two images are F/5.6, 1/20, ISO 800
After touch up
Better lit scene but shows slight motion blur
This last image is F/5.6, 1/4, ISO 800
I believe that I will have to wait next year and hope I have a faster lens by then. I just don't think the 28mm-135mm f/3.5-5.6 lens is fast enough. I was trying this without a tripod to get in tighter.
Also I was taking these shots without the flash to get the drama of the tree lights.
What I would have prefer is a shutter speed of 1/125 or better as it helps with my hands shaking I believe the slowest should be 1/60
And the lower the ISO the better for noise.
These preferences are what I am used to with my Canon G3 that does not have IS.
I am getting so off track here, lol. But anyways, here are the pictures.

And black.

Similar Messages

Maybe you are looking for