And suddenly my captures are audio-less...

I have been digitizing some VHS tapes through an ADVC100 this evening. I've done about 15 tapes without trouble, then suddenly FCE stopped capturing the audio from the tapes. This happened without me quitting FCE or anything. Just stopped. I tried to capture with iMovie and iMovie captured the audio fine but iMovie's capture is quite clunky for my tastes. I trashed FCE's prefs tried different setups. Restarted and still cannot get back to FCE's capturing goodness that I had for the previous 15 tapes. grrrrrrrrr
Idears????

I don't know whether this applies to your situation but occasionally FCE can give the impression that the audio has not been captured when it actually has.
Go to View>Video Out and check that "Canvas Playback" has been selected.

Similar Messages

  • I'm trying to import a sequence into premiere pro and suddenly a few sections are 'media offline'

    I'm trying to import a previous premiere pro sequence into premiere pro and suddenly a few sections are 'media offline' (it has always worked up until now).  I would be able to relink the clips but the offending ones aren't showing up in the project's clip bin. To make things worse I can't drag and drop the corresponding clips from my finder into the clips bin and then 'replace clip with' in the timeline, as the clips in the project have been renamed, and are synced up to audio (this is a 90 minute feature film).
    Can anyone help??!!

    Right click on the offline clips and select Reveal in Project.  This will call up the bin they're in, where you'll be able to relink.

  • Captivate 7 is not capturing system audio, and the software has a broken link

    The Problem:
    Captivate 7 is not capturing system audio. When I start a screen recording, the line with "System Audio" and its checkbox are eternally grayed out. Next to the grayed out words is a link that says, "Why is this disabled?"
    The lnik goes to:  http://www.adobe.com/go/cpaudio
    Which is not a valid link, so Adobe's site redirects me to blogs.adoble.com/captivate which is ZERO help. Both browsing and the search bar bring no answers.
    The Device:
    Apple Macbook Air, Mid 2013, running OSX 10.9.2.
    What I've done already:
    Obvsiously I have set Captivate 7's preferences to capture system audio, and have set System Settings -> Security and Privacy -> Privacy -> Accessibility to allow Captivate to control my computer.
    I have also tried clicking the Mic icon, Selecting Source with the System Audio icon and that doesn't record system audio either. It acts like it is recording system audio, but when I stop recording I get a popup that says, "Cannot record system audio. Ensure that you are playing audio on your computer [Okay]"

    It's a wierd one.
    One thing to try, and this fixes a lot of things, trash your preferences.
    http://www.digitalrebellion.com/prefman/
    DM

  • My Ipod is 5-6 years old.  Suddenly, I'm getting audio through only one ear bud.  Is this a common occurrence?  And does this just mean I need to replace them?

    My Ipod touch is 5-6 years old.  Suddenly, I'm receiving audio through only one ear bud.   Is this a common occurrence?  And does this just mean I need to replace them? 

    It's fairly common for headphones after extensive use (5+ years).  If you have another set of headphones (any type with same connector), try it with the iPod to determine if the fault is on the headphones or on the iPod.  Or you can try the same headphones with another device, to see if they are working fine or you get the same audio problem.

  • Importing cd's and suddenly can't see the recently added folder, have been unable to figure out how to re-display it, know the songs are going somewhere

    Was importing cd's and suddenly can't see recently added folder, been unable to figure out how to re-display it, know the songs are going somewhere

    See Restore Original Smart Playlists.
    tt2

  • SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    Hi,
    I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
    <Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
    to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
    I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
    "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
    I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
    renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
    Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
    error logging. So we created another project in Visual Studio called:
    <Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
    And this is when the error has come back and bitten me! The scenario is now as follows:
    1. project1 packages and deploys successfully with long feature names and deep paths.
    2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
    I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
    1. By doing the following I can get project2 to package
    In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
    Clean the solution
    Shut down Visual Studio 2010
    Open Visual Studio 2010
    Rebuild the solution
    Package the project2
    et voila the package is generated!
    This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
    no longer be hanging onto something.
    Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
    solutions on a Build Server using automated builds.
    2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
    3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
    does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
    4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
    from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
    5. DebugView shows nothing useful during the build and packaging of the project.
    6. The error seems to occur in
    CreateSharePointProjectService target called at line 365 of
    Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
    project2 completely and recreate it and introduce it into my Visual Studio solution.
    Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
    Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
    project etc... and is actually workable in a meaningful Visual Studio solution.

    Hi
    Yes, I thought I had fixed this my moving my solution from the usual documents  to
    c:\v2010\projectsOverflow\DetailedProjectTimeline
    This builds ok, but when I come to package I get the lovely error:
    Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
    Now, the error seems to be related to 
    Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
    <metaData>
    <type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
    <importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
    </metaData>
    <data>
    <properties>
    <property name="Title" type="string">VisualProjectTimelineWebPart</property>
    <property name="Description" type="string">My Visual WebPart</property>
    </properties>
    </data>
    </webPart>
    </webParts>
    .... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
    Daniel

  • I had been deleting some of the double songs that are on I-tunes and suddenly all but three of my bob dylan albums  collection  dissapeared . . can i get them back ?  if  i can ,how do i ?

    I had been deleting some of the double Dylan  songs that are in my I-tunes library and suddenly most of my Bob Dylan collection dissappered . I was requesting to "save file"  at the time .  How would I get those songs back - if it's possible ?       Jim

    http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CNyMyIvbtqoCFcE42godv DJR7g
    I am assuming you never backed up your computer.
    Sounds like you still may have problems with your PC.

  • Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space.

    Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space. Can someone please help?

    To add to Nick's comments, "Other" is typically approximately 1 gigabyte.  Occasionally for some users, it gets much (many times) bigger because they have some corrupt files.  If that's the case, it's best to restore the iPhone.
    Plug the iPhone into (current) iTunes, let it sync, then choose "Restore" on the right.  If restoring from the iPhone backup does not help, then restore (again) as new and then manaully sync the iPhone.

  • All of a sudden my icons are big and everything is low res

    All of a sudden my icons are big and everything is low res as if it in safe boot mode. I did not safe boot my computer. I have shutdown & restarted and it is the same. Could it be a virus?

    First hold the Control key and scroll or swipe down to make sure that your display is not just zoomed in.
    If that does not return the display to normal, go to System Preferences > Displays > Display tab and check the Resolution: 
    If that does not help, reset the PRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • My wife and I have been texting on our iPhones. All of the sudden all messages are being sent as text. We cannot seem to make the iMessage work.

    My wife and I have been texting on our iPhones. All of the sudden all messages are being sent as text. We cannot seem to make the iMessage work. Any ideas?

    Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac"   maybe thats why nobody answered you.
    It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
    since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well.   I prefer to keep things simple, but...........you and yours,  I dont know.......
    http://support.apple.com/kb/PH11468

  • All of a sudden my contacts are all screwed up.  Somehow my yahoo contacts have been added to my phone.  I have duplicates of stuff in my phone that shoudn't be there and stuff I never entered in contacts.  How do I fix this?

    All of a sudden my contacts are all screwed up.  Somehow my yahoo contacts have been added to my phone.  I have duplicates of stuff in my phone that shoudn't be there and stuff I never entered in contacts.  How do I fix this?

    if you don't want your yahoo contacts, go to settings - mail - yahoo - then turn off the contacts

  • HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

    Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

    read this and see if it helps: http://support.apple.com/kb/ht2090

  • Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    Hi, Im trying to get the whole path in my server, so i tried that with this following code
    Get-ChildItem $sourceFolder  -Recurse | ?{$_.PsIsContainer} |Get-Acl
    But then, it showed me somtehing like this :
    Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
     I tried to find the solver everywhere and mostly they propose to change the path name, which is impossible, since I am working with my company server, and those folder have already there before i start to work here, then the other ask me to use robocopy,
    but all of the trick just dont work
    is there any way to solve this problem? thanks

    There is no simple solution to this. And it is not a limitation of powershell itself, but of the underlying NTFS file system.
    If the problem is that a folder with a name longer than 248 exists anywhere within your directory structure, you are hooped.
    If the problem is that some fully qualified path names exceed 260 characters, then, in those cases, the solution already given is to create a psdrive partway up the path from the drive letter or server/share root of the path. Unfortunately, the output produced
    will be relative to that psdrive and not to what is specified as the $sourcefolder.
    unless you already know where those problematic paths are, you might consider trying to trap those errors and have your script figure out where it needs to create psdrives. You might then be able to calculate the equivalent path for each file or folder and
    output that. the programming effort would be simpler to just created a psdrive for each folder encountered, however I expect that would be very inefficient.
    Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

  • My audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic

    my audio unit manager has gone, i cant scan it and all the components are in the right place, i just cant access my au manager at all in logic
    any help please im going out my mind
    regards james

    Thanks for getting back to me, The AU manger was there, just when you treid to click on it, it just wasn't responding.
    But i had a scan thourgh google and found the answer, i removed the audio units cache and restarted it and all was good. I was really starting to get stressed over the matter but however i got to the bottom of it.
    Again thanks for replying
    Regards James

  • HT1688 Where are the less than and greater than symbols?

    where are the less than < and greater than > symbols?

    Assuming rawValue of the total field is returning as "10000".
    In the Calculate event of the Total field, write the following with Java Script as language.
    VP_Signature.presence = "hidden";
    Officer_Signature.presence = "hidden";
    if(total.rawValue>10000){
         VP_Signature.presence = "visible";
         Officer_Signature.presence = "visible";    
    else{ 
         VP_Signature.presence = "hidden"; 
         Officer_Signature.presence = "visible";
    Thanks
    Srini

Maybe you are looking for