And yet another publishing error

I'm trying to publish my sites to a folder so I can upload them to my domain server. iWeb is not able to publish to the local folder on my desktop without getting a publishing error. I'm seeing other issues similar to mine on the forums. Wondering if anyone has pinpointed the problem and if there's some way to get around it while we wait for things to get fixed in Mobile Me Land.

KimberleeJo wrote:
...getting a publishing error. I'm seeing other issues similar to mine on the forums. Wondering if anyone has pinpointed the problem...
KimberleeJo ~ State the exact error you're getting and paste the URLs of the relevant forum threads here. Meanwhile, +"A lot of problems can be solved simply by..."+ Read more in the "Fix iWeb" section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html
But before trying such suggestions, read this:
_iWeb ’08: Backing up your Domain file_

Similar Messages

Yet Another Publish to .Mac Error

Ok, got iWeb 08. Upgraded. Started it up. Updated my iWeb 06 created sites. Completed successfully.
I then go to publish. Click continue on the "make sure nothing you are uploading is copyrighted...blah, blah, blah." It uploads the sites. Everything is blue. Then iWeb states it will finish updating the sites in the background. Basically updating pictures movies, so on and so forth. Goes through each site and then at the very end after everything looks to be uploaded. Then suddently everything goes back to red and I get "Publish Error...There was an error updating .Mac." That's it nothing else.
I found this tech article: http://docs.info.apple.com/article.html?artnum=305954
Did what it said and still nothing. I'm connected to .Mac. Got the green little dot at the bottom of the screen. I can connect to the iDisk. I have tried to remove the previous sites from the iDisk but won't allow me to. Get permission errors if I remember correctly.
Has anyone else had this issue?

Hey David - welcome to the forums...
I had this error and the only fix I had was to redesign my entire website.
I'm hoping that I did that prematurely and that someone here will have and answer.
That said...
At the bottom of the iWeb app page (where the green light is) does it have a personal domain name attached to your email address?
I suggest you tell iWeb under FILE-Personal Domain (something) to turn it off. Will take you to another external website and so 'something'. Then restart iWeb and try publishing again.
That was one step I never tried in trying to fix my issues. It MIGHT help. You can always turn it back on later.
Good luck.
CaptM

I tried to implement photo albums using iweb and got a publishing error.

I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
my iWeb version is 3.0.4 (601)

Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work. If they do try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If you're still not able to publish from iWeb to your server download and use the free Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
OT

Proxy servers and the "cannot publish" error - v.1.1.2

Using the latest iWeb (1.1.2), attempts to publish my work to my .Mac account resulted in the infamous "publish error." I then came across this KB article:
http://docs.info.apple.com/article.html?artnum=303927
I turned off my proxy access in the Network settings, and voila, publishing was successful. But now, I'm circumventing my much-needed proxy.
It's been suggested in other threads here that proxies aren't a problem if one's iDisk is accessible through it. This is not the case. With the proxy, iDisk access is fine, it's only iWeb publishing that is a problem.
Any way to keep my proxy and still publish with .Mac?

iDisk access and iWeb publishing ARE indeed different activities. They are similar in that they both utilize the WebDAV protocol over Port 80, but they are different in their individual requirements for back and forth communications with the .Mac servers in terms of how soon or in what timeframe they expect to hear confirmation of transfer back from the server.
It is apparent to me that the network timeout threshold for copying something to iDisk is a lot longer than that for publishing through iWeb. In fact, I would say that iWeb has become a lot more stringent with network timeouts ever since it was updated from 1.0 to 1.1.
Anything in between your computer and the .Mac servers contributes to network latency. There are both software and hardware contributions to this latency. Proxy servers, like routers, can be software or hardware based. Software-based latency is most often greater than hardware-based latency.
I would guess that removing any kind of latency "generating" obstacles within your control would likely improve iWeb function and decrease the incidence of publish errors. Some of these obstacles can include background processes, busy LAN activity (like VOIP use or streaming music/video or online gaming), wireless access points, proxy servers, and routers.
On the other hand, I also think that if Apple increased iWeb's network timeout threshold, that most of the publishing errors that people experience could be eliminated.

Please help another publishing error

Hi
I have checked around for answers (or at least a reasonable explanation of something fairly simple) and found nothing.
I have just tried to add a new pictures page to my site, with a couple of holiday pics. All well and good.
Then when I publish the site, and go through all the hullaballoo of creating every single page again (can someone please explain why? - particularly when it includes creating pages on a different site that has had nothing changed on it!) I get a publish error, failing to upload some arbitrary .jpg. However this graphic was on one of my old pages that I had not touched at all (and had remained "blue" in iWeb).
What is bizarre is that my new page has been published (along with all its pictures) and the old page with the failed graphic is also fine (and all its pictures are there).
I would really like to know why iWeb recreates all my pages, why there was an error on a page and file that iWeb shouldn't have been touching at all and finally, why iWeb still registers my new page (and hence my site) as unpublished despite the fact that I can visit all the new stuff on it?
Just as an aside, I stopped the upload after the error, but my Activity Monitor was still registering a whackload of uploading going on until I actually quit iWeb.
What's going on? In words of one syllable or less please, I am a little slow.
Thanks!
John

The procedure is invalid and requires compilation. This can occur automatically when an object that the procedure is dependant upon is changed, there are a number of conditions that control this, which I'm not going into here, documentation is available on technet. Alternatively, when it was last compiled there was an error that was never fixed...
Anyway, run the following command
alter procedure flash_report compile;
Alternatively you can use DBMS_UTILITY.compile_schema to compile the entire REPORT schema.
If you get an error, then it's time to debug
Use show errors or select * from user_errors to identify where the error is.
Fix the error, and recompile.
Simon

Yet more publishing errors

I've been playing with iWeb a bit since it was released, and whenever I actually sit down and do some proper web stuff I get publishing errors.
Publishing Error
An error occurred while publishing file "shapeimage2_rollover4.png"
I've had this lots of times now. At first I thought it was me doing something wrong, but now I'm getting very frustrated. I have no idea which file 'shapeimage2_rollover4.png' is, and since this error seems to halt iWeb in its tracks, leaving an unpublished site, what do I do ? I've deleted everything and started again about 4 times now, and now I'm at the point where I'm thinking iWeb is simply too riddled with bugs to be of any value. Does anyone have any idea what I'm doing wrong, or is iWeb just buggy junk ?
Sorry for the sour tone - I'm getting very frustrated.
Powerbook G4 Mac OS X (10.3.7)
Powerbook G4 Mac OS X (10.3.7)
Powerbook G4, PowerMac G5 Dual 2.7 Mac OS X (10.4.4)
Powerbook G4 Mac OS X (10.3.7)

I have been having all the probems as well. My
lastest is "an unknown error occured". So what am I
to do with this?
My issue seems even worse: I can't even publish on local folder. The publish stops at the very same moment, just like if a page or a specific file is corrupted. That's a real bore...
I read in someone responses to
delete all the files on your hard drive, in iWeb,
site and upload agian. I did try that, and seems like
it worked. I may try again. Will let this thread know
what happens.
I did this. It changed... nooooo-thing
I hope they'll fix and improve this. I've bought iLife 06 specifically for iWeb and I just can't use it... Pfew...

Workflow Manager and SharePoint Designer publishing error

Hello all,
I'm hoping for some help in fixing this issue.
I've been trying to publish a workflow using SharePoint Designer only to find that I get this error:
"Errors were found when compilint the workflow. The workflow files were saved but cannot be run."
After clicking on the advanced button it shows error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.WorkflowCommunicationException: The request was aborted: The request was canceled. Client ActivityId : 6a78ad9c-6ac6-f03a-0680-003bd46e5f68. ---> System.Net.WebException:
The request was aborted: The request was canceled. ---> Microsoft.SharePoint.SPException: The requested operation requires an HTTPS (SSL) channel.
Ensure that the target endpoint address supports SSL and try again.
Target endpoint address:
Note: the message cuts off after the "Target endpoint address".
Looking on the SharePoint server, when I try and pull up the Workflow Manager site (https://localhost:12290/) I get this response:
<?xml version="1.0"?>
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>AuthorizationError</Code><message><Message>The caller does not have the necessary
permissions required for this operation. Permissions granted: None. Required permissions: ReadScope.</Message></message></Error>
I am running this farm with HTTPS and I have registered the SP workflow service with the appropriate application. I have also set the Workflow Management Site bindings in IIS to utilize the same certificate as the default SharePoint site.
At this point, I don't know if the error that I received from Designer is related to the Site error, although I do know that I also have a Development environment that is able to publish workflows just fine. However, this farm uses HTTP rather than HTTPS
so I can only assume that the differences are what's causing the issue. I would appreciate any help that anyone can offer. Thanks!

Hi,
As I understand, you encountered the issue when you published a workflow on SharePoint 2013 workflow platform.
I wonder does it work well before when using 2013 workflow platform? If it works before, did you install any updates or change the configuration to the workflow related settings?
If this is the first time after you installed workflow manager 2013, then I’d recommend you try re-registering workflow service per the link below and post the result:
http://technet.microsoft.com/en-us/library/jj663115(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
From the message you accessed workflow host uri, please make sure the account to wfsetup and wfservice account are both in wfadmins group.
http://blogs.msdn.com/b/briangre/archive/2013/02/20/least-privilege-configuration-for-windows-azure-workflow-with-sharepoint-2013.aspx
Regards,
Rebecca Tu
TechNet Community Support

IMovie -crushing and Unable to Publish Error -50

Hello Dear Helpful People!
I have a problem with iMovie 11. It all worked fine until I today. I had problems opening the program,
then I had problems with the preview. All problems I hadn't had 2 month ago.
When I finally finished my project and wanted to export it, or publish it this error is coming:
The project could not be prepared for publishing because an error occurred. (-50)
Can someone please help me?
I screened the forum for similar problems and all the solutions there couldn't help me.
I have 430 GB free Space, I located the Sharing Folder and set all permissions to Read&Write.
This is so frustrating!
I would be forever thankful if someone got an idea for me...
Thank you all so much,
Danny
MacBoook 2008
2GHz Intel Core Duo -
4GB RAM
Mac OSX 10.7.3

Hi
I located the Sharing Folder and set all permissions to Read&Write.
Please inform an ignorant person - What did You do and How ?
• As I read the Error -50
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
AND NEVER - Move or alter any folder named
• iMovie Event's or
• iMovie Project's
EVER
All - moving of material and Projects must be done Within the iMovie Application since iMovie'08 else it loses track of it and flips out.
Yours Bengt W

Yet another parseEscapedXML() error

Hi All,
I have the following operations:
<copy>
<from expression="ora:getContentAsString(bpws:getVariableData('p_invoice_payload','cXML'))"/>
<to variable="p_java_str"/>
</copy>
<copy>
<from expression="ora:parseEscapedXML(bpws:getVariableData('p_java_str'))"/>
<to variable="p_invoice_payload" part="cXML"/>
</copy>
This returns a type error:
<ERROR> <b2bc-d.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:parseEscapedXML(bpws:getVariableData('p_java_str'))", the reason is FOTY0001: type error.
Please verify the xpath query.
Any idea what can be wrong? I plan to do some string processing after the first copy. But cannot convert back.
Thanks in advance.

Hi Suresh,
ora:parseEscapedXML() expects a single parameter input of type string and bpws:getVariableData() returns a node set type.
Anyways.. it worked fine for me to use something like ora:parseEscapedXML(bpws:getVariableData('<varname>')) as you did.
Sometimes I observed that I get FOTY0001: type error and so I have to use something like this ora:parseEscapedXML(+ora:getNodeValue+(bpws:getVariableData('<varname>'))).
Hope that helps.
Regards,
Srini.

Wine and yet another font problem

So I upgraded my system (had to load lots of stuff, Xorg, Wine, the kernel..) and now my Wine fonts look like this:
http://koti.kapsi.fi/anpurola/winecfg.png
Some fonts are ok, but most of them are unreadable. I mostly run poker clients. I tried to delete my .wine directory, and install fonts again with winetricks, didn't help.
Does this have something to do with the new Xorg? I had to remove RgbPath and AutoAddDevices from xorg.conf BTW, to get it work.
Last edited by strummer (2008-12-08 12:12:31)

LTSmash wrote:
strummer wrote:
sunday wrote:
I've found this help:
Using wine over remote X11 sessions and No text or damaged text displayed
Please make sure not have added any fonts to wine. Font conflicts can sometimes cause a similar issue. If a fresh wine prefix.(A copy of wine that nothing has been done to yet) Is having this problem. Try setting following in registry
[HKEY_CURRENT_USER\Software\Wine\X11 Driver]
"ClientSideWithRender"="N"
Place above in text file and it can be inserted into registry by "regedit settings.txt".
This was report as been required of OS X on the 1 Dec 2007. This may change. Please apply only as required.
but it doesn't work for me. Anybody has an idea how to do it?
Wow it works! Thank you! Too bad if some of you still have problems.. BTW I'm using nvidia-96xx driver.
edit: Now that I tried different programs, I noticed some of the graphics won't work For example, I don't see any buttons in programs such as Spotify or Full Tilt Poker client..
Whoa thanks. It worked for me too.
how you ran regedit?
Last edited by na12 (2008-12-31 10:46:54)

Yet another 8006 error when downloading podcast episodes

Hi all,
my podcast just stopped working today. I used to have a PHP-wrapper, and all mp3-files were handled by it. This allowed me to track the number of completed downloads instead of started ones. Well, this didn't work when somebody tried to download an episode with their iPhone. Now I have changed my RSS-feed to work so that it points to a PHP-script which simply provides an HTTP 302 status and the link to the actual file.
For some reason this seems to work on everything else, incuding the iTunes app in iPhone, but iTunes on my Macbook (or anybody else's iTuneses for that matter) just give that notorious 8006 error.
URL to the feed is http://media.konsolifin.net/podcast/podcast.rss?src=itunes (That src variable is not really necessary, but I like to have it there to help me track what download channel the listeners are using.)
Anybody have any idea what could be wrong this time? Lucky thing is that since I have written the code for the whole podcast page myself, I can easily change virtually anything and also get some information about the incoming requests.

The URL given for your latest episode is
http://media.konsolifin.net/podcast/konsolifin_podcast_bonus_track_005_joulukale nterin_ensimmainen_luukku-46-itunes.mp3
When pasted into a browser this redirects to
http://media.konsolifin.net/podcast/mp3/konsolifin_podcast_bonus_track_005_joulu kalenterin_ensimmainen_luukku.mp3
However when subscribing iTunes appears to start downloading but then brings up an error. I don't know anything about PHP, but from various other reports it does appear that iTunes is flaky when it comes to calling media files using a script. It's really recommended to provide a direct link to the file. I understand that you want to use PHP to provide usage information, which you won't get by linking directly, but as I say it often causes problems and I'm afraid I can't offer any advice on getting round them.

And yet another reverse telecine question. =)

Okay so I shot the footage in 24p advanced on a dvx100b. I batch reverse telecined in cinema tools. It worked fine except for the first frame of some of the final reverse telecined files. Only on some of the files (randomly) the first frame is interlaced. This only happened to some of the files and it is not really a big deal because there is nothing important usually in the first frame but it is a little worrying. Could it be because I didnt really pay attention to which of the 5 frame set (0-5/A-D frames where frame 3/C is the interlaced frame in 24p advanced) was captured as the first frame during capturing? I have heard that you must capture the 0/A frame as the first frame for reverse telecining/advanced pulldown removal to work. Is this true. Even if so, the whole clip other than the first frame is still fine so, any ideas?

Ive received an answer to this in another forum. It is due to the fact that cinema tools has no other field to combine with for the first frame depending on which of the 5 field sequence it started recording in. It is really no problem because it is only the very first frame that is affected.

And yet another black screen issue

As many others in this forum I suffer from the black screen problem when installing Windows 7 32 bit on my newly bought iMac OS 10.6.4. Will Apple please take care of this problem!

Apple has, in their tech notes, which can usually be found from Boot Camp Support page. I guess Boot Camp Assistant Help menu too.
*iMac displays a black screen during installation of Windows 7*http://support.apple.com/kb/TS3173
First item under "Troubleshooting"
http://www.apple.com/support/bootcamp
iMac and Windows 7 = BSOD
http://geekswithblogs.net/ajames/archive/2009/08/12/take-an-imac-and-windows-7-r tm-ndash-and-have.aspx
BC 3.0 FAQ, What's New
http://support.apple.com/kb/HT3777
Boot Camp: Windows 7 installation frequently asked questions
http://support.apple.com/kb/HT3986
Boot Camp Software Update 3.1 for 64-bit requires 3.0
http://support.apple.com/kb/DL979
http://www.macintouch.com/readerreports/bootcamp/index.html

And yet another file system...

SpadFS - new experimental filesystem.

It has not got journaling!
Be carefull! it is impressive to see a new FS done for a tesis but... be carefull!
Damnshock

IWeb 08 UPGRADE and now receive a "Publish Error"

I am receiving a "An unknown Error occurred" Publish Error after I upgraded to iWeb 08. I cleaned out my iDrive directory, modified my website, etc, and still receive the same error. PLEASE HELP!

I got the "Publish Error", "An unknown error occurred." message when I was publishing to a folder. I tried again and watched the progress carefully, noting that it seem to stop on a blog page. I also found this message in the console log:
2007-08-14 12:37:46.993 iWeb[359] EXCEPTION RAISED during Publish:
** Can't cache image
2007-08-14 12:37:46.993 iWeb[359] Publish error: An unknown error occurred.
I removed the image in the blog's title area and the error went away. It still works after I added it back in. I had to do this for all three blogs on my site.
I do see dozens of these other messages in console log, but nothing has broken yet (that I can tell):
2007-08-14 12:37:47.783 iWeb[359] Error getting configuration data through: getDataAtPath

And yet another publishing error

Similar Messages

Maybe you are looking for