Android API for AnyConnect ICS+ available?

Hello,
I would like to ask if there is any possibility to access the AnyConnect ICS+ mobile application from within the Android SDK.
Is there any other publicly available API that can be used from within Android SDK to built in Cisco VPN functionality within a third-party Android application? I would be grateful for any help. Thanks in advance!

does't suprise me at all sony needs more experienced beta testers really those that actualy use device bit more extreme then normal user would.
If something is stable in extreme conditions then its likely perfectly stable talking about actualy running lot apps leaving everything open and opening new tab for anything etc while doing normal every day tasks that everyone usualy does or more.
other then that they should probably test much longer have bit more patience while testing while perhaps testing 5 tablets at same time.
perhaps they could use some software that mirror commands they do to nearby tablets on a grid so they can even test 100 tablets at once to see which one gives in and randomly shutdown first.
or just to to have a different build on each tablet to see which one is most stable and which one fails so they can rule out bad builds.

Similar Messages

How to read inline feed using android api for odata

Hi,
Need help on reading inline feed using android api. BB and iOS supports inline but for android there is no api.
Please suggest the workaround
Regards,
Satish

This link is very useful:
Knowledge Management and Collaboration (KMC)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Knowledge%20Management%20and%20Collaboration%20Developers%20Guide.html
Patricio.

Android API for Scan via HP Scanners

Hi,
I am an android developer and would like to develop an android application to scan documents via HP printers directly to the android device. I have implemented the same for Samsung Printers but need an API reference for HP printers as HP is one of the most commonly used printer vendors.
Please let me know if there is an API for the same.
Thanks,
Sudhanshu

@coffeewithsuds
I know this post was made a while back but I see no one replied. There's a link below to submit ideas for apps.
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Got-an-idea-for-a-pr...
I'll also pass your post on to some of the folks here....
Many thanks
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

EWS JAVA API for availability is giving only 10 suggested times in a particular day

I'm using EWS JAVA API for seeing the availability of contacts who had shared their calender with me. Here in the suggested timings, I can able to see only 10 suggested timings even though there can be more than 10 suggested slots.
I would like to check is there any limit on suggested times ?
API is also giving quality of timing like "Good", "Excellent" on what basis this is decided ?

You can specify the maximum number of suggestions per day using the MaximumResultsByDay parameter (http://msdn.microsoft.com/en-us/library/office/aa565641(v=exchg.150).aspx).
The quality is determined based on how many attendees are available and is influenced by the GoodThreshold:
http://msdn.microsoft.com/en-us/library/office/aa563485(v=exchg.150).aspx.

Available APIs for process and package management

Hello All and welcome to my Hello All:
Welcome to my inaugural post. I am a complete noob to Solaris (although I have been using Linux for 5+ years) and am in the process of trying to get a handle on what local C/C++ APIs (if any) are available for management. Specifically, I am looking to find out about process and package management.
For process management, basically I would like to know is there some kind of interface to the the prstat application (ie. Memory and CPU utilization). Does something like this exist?
For package management, I am looking for the ability to add, remove, and query the package �database�. Correct me if I am wrong, but the Solaris package �database� seems similar to that of a Debian system (at least from the perspective that the informational files are stored as plain text in a well-defined directory [ie /var/sadm/pkg/]).
I have installed Solaris 10 on an x86 machine with a full installation; however, of the installed development kits (listed below) nothing jumped out at me.
-bash-3.00# ls -1d /var/sadm/pkg/*devel
/var/sadm/pkg/SUNWaspell-devel
/var/sadm/pkg/SUNWevolution-devel
/var/sadm/pkg/SUNWevolution-libs-devel
/var/sadm/pkg/SUNWgnome-a11y-base-devel
/var/sadm/pkg/SUNWgnome-a11y-libs-devel
/var/sadm/pkg/SUNWgnome-a11y-reader-devel
/var/sadm/pkg/SUNWgnome-a11y-speech-devel
/var/sadm/pkg/SUNWgnome-audio-devel
/var/sadm/pkg/SUNWgnome-base-libs-devel
/var/sadm/pkg/SUNWgnome-camera-devel
/var/sadm/pkg/SUNWgnome-common-devel
/var/sadm/pkg/SUNWgnome-component-devel
/var/sadm/pkg/SUNWgnome-config-devel
/var/sadm/pkg/SUNWgnome-desktop-prefs-devel
/var/sadm/pkg/SUNWgnome-file-mgr-devel
/var/sadm/pkg/SUNWgnome-hex-editor-devel
/var/sadm/pkg/SUNWgnome-img-editor-devel
/var/sadm/pkg/SUNWgnome-libs-devel
/var/sadm/pkg/SUNWgnome-media-devel
/var/sadm/pkg/SUNWgnome-panel-devel
/var/sadm/pkg/SUNWgnome-pilot-devel
/var/sadm/pkg/SUNWgnome-print-devel
/var/sadm/pkg/SUNWgnome-project-devel
/var/sadm/pkg/SUNWgnome-terminal-devel
/var/sadm/pkg/SUNWgnome-text-editor-devel
/var/sadm/pkg/SUNWgnome-vfs-devel
/var/sadm/pkg/SUNWgnome-wm-devel
/var/sadm/pkg/SUNWgnutls-devel
/var/sadm/pkg/SUNWjpg-devel
/var/sadm/pkg/SUNWlibexif-devel
/var/sadm/pkg/SUNWlibgcrypt-devel
/var/sadm/pkg/SUNWlibpopt-devel
/var/sadm/pkg/SUNWmozilla-devel
/var/sadm/pkg/SUNWmoznspr-devel
/var/sadm/pkg/SUNWmoznss-devel
/var/sadm/pkg/SUNWogg-vorbis-devel
/var/sadm/pkg/SUNWopenjade-devel
/var/sadm/pkg/SUNWopensp-devel
/var/sadm/pkg/SUNWpcsclite-devel
/var/sadm/pkg/SUNWpng-devel
/var/sadm/pkg/SUNWpostgr-devel
/var/sadm/pkg/SUNWPython-devel
/var/sadm/pkg/SUNWTiff-devel
I've placed orders for Solaris Internals and Solaris Performance & Tuning (that should arrive tomorrow), but I was hoping that someone could give me a gentle push (or perhaps a swift kick) in a general direction. :)
Thanks.

For process management, basically I would like to
know is there some kind of interface to the the
prstat application (ie. Memory and CPU utilization).
Does something like this exist?Not prstat (although you could 'truss' it and see some of what it's doing to collect the information). kstat is available with a C interface and through perl/shell. It has several CPU fields. It's certainly useful for monitoring, but read-only. I'm not sure what you're looking for in terms of "management".
Also 'dtrace' can provide tons of dynamic information, but that's not necessarily what you're looking for.
For package management, I am looking for the ability
to add, remove, and query the package �database�.
Correct me if I am wrong, but the Solaris package
�database� seems similar to that of a Debian system
(at least from the perspective that the
informational files are stored as plain text in a
well-defined directory [ie /var/sadm/pkg/]).Yes, although it's based on the SysV packaging system. I don't believe there's any API for it outside of the 'pkg*' utilities.
Darren

Is there any available API for BOE Translator?

Hi,
      Is there any available API SDK for BOE Translator?
      Since the client has 2000+ measures to be translated, simply configuring the translation manually cannot meet the needs. The client would like to build the translation in batch through code.
      So does the Translator have any API to call?
      Any suggestion is appreciated.
Best Regards,
Vincent Li

There currently is no public API for the Translation Manager.
Sincerely,
Ted Ueda

[Exchange-Online][EWS][Android]Is it possible to reach Exchange room resource mailbox through Office 365 API for Java/Android

Hi guys,
Title covers largely what I'm trying to do. I'm trying to create an app in Android Studio that uses the Office365 for Android API (https://github.com/OfficeDev/O365-Android-Start).
In this app i want to bind calander events to Locations that i create in Exchange online. Is this possible? If so, how? Have not been succesful in finding in any information on the issue so far.
At the moment when the user wants to create an event, the user just types in the "location", but this is just a string and not bound to anything. I would prefer to get a dropdown of all the room resources I have on Exchange and that this will make
that the location. This to prevent 2 seperate meetings happening in the same room at the same time.
(Was sent here from the O365-forums, so sorry if this is a misplaced post)
Thanks for any and all help.
Mathias

So then I'm guessing you want to be able to retrieve the list of resources in the address book? If the Exchange admins have configured room lists, you could use those:
https://msdn.microsoft.com/EN-US/library/office/dn643730(v=exchg.150).aspx.

Google Maps API for flash not working on real device iPad

I use flash builder 4.5.1 to build app for Google Maps API for iOS (map_flex_1_20.swc), and it is working well even on the simulator on PC, but after I generate the IPA use FB4.5.1, and install on iPad , it not working at all, only show a while screen.(I used the TabbedViewNavigatorApplication, the botton Tabbar is working, I can switch the page, but on the maps page show nothing)
I also try the code on Flash CS5.5 using map_1_20.swc , when on the PC debug, it works well,(swf files), but install the AIR ipa on the iPAD, show nothing only a white sceeen.
anyone met this problem?

You can also use the MapQuest Mobile Flash Maps API. It's supported by MapQuest and does not need any work-arounds in order to work with the Flash Platform. It also takes advantage of the "build once, deploy anywhere" functionality in Flex 4.5+. MapQuest provides a demo app for Android and iOS and has the source code available for download, too.

VPN API missing on ICS

Hi there,
I saw that several discussions about the VPN API were started, but without any real answer...
The basic problem is that the ICS VPN API is not on the sony rom, preventing us to use ICS VPN software, plus the l2tp is gone, so we can't trick the system as you could with 2.3...
I managed to get a tun.ko working on my phone (neoV, rooted), but I am still missing the silly little dialogs that ask you if you trust the vpn software. They are normally present in a VpnDialogs.apk system app.
But I can't steal it from another phone or emulator, because it is not signed by sony.
If sony will not include the VPN API in a future update, could you please provide at least a signed VpnDialog.apk, so I can add the vpn api support myself? (and make a tutorial for it).
I can see lots of signature spoofing techniques around, but none where you sign a whole new packet. It might be that some more recent phones have this (please let me know if someone can do an adb pull /system/app/VpnDialogs.apk on their phone and pass it on to me).
Thanks in advance for your help and please don't let this spoil my otherwise good experience with my phone.
JP_SH

Thanks nolramlb, but in their source code (file OpenVpnService.java), they import android.net.VpnService and then use establish() which relies on the API and tries to call the dialogs in VpnDialogs.apk.
In fact, they use exactly what I would like to use as well and getting the API fixed would allow me to use their software, for example...
Thanks to this API, you can do VPN without being root, which is great. (Ok, in my case, I need to be root to fix the API, before using VPN without being root, so it loses the point a bit...)
Also, since the API exists, I can't imagine anyone in their right mind using another way for making ICS VPN programs, so if I want my NeoV to use such software, I need to get the API working.
Thanks in advance Sony!

Need API for creation of tag cloud

Hi,
I have a requirement to create a tag cloud based on a particular business logic. Does Webcenter provide API for the same?
Can I customize the "Tagging - Tag Cloud" task flow? If yes, how and to what extent?
Thanks in advance,
Anurag

Hi Ajit,
No another FM is available . U can directly create using transaction SE01 .
Or u can create using BDC .

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

API for Physical Inventory Tag Count

Hi , Please let me know if any Public API available for updating the physical Inventory tag count ? We have requirement like update of physical counts of Inventory tags, the idea is the counts are stored in flat file is in same column format of Physical Inventory Tag count form in Inventory , here just we need to update the counts. let me know any public API avaialble

According to the oracle knowledgebase, there is no Public API. But there is an enhancement request that you might want to add your company to.
Bug 3611131 : INTERFACE/API FOR PHYSICAL INVENTORY ADJUSTMENTS / TAGS

Need API for getting List price and unit price before Order entry

Hello,
I have requirement of provide unit & list price before order entry (Oracle Pricing and availability form provide the same).
Please suggest any API for the same.
Thanks
Akil.

Hi,
Thanks luko,
I got API QP_PREQ_PUB.PRICE_REQUEST, and its return output as expected,
Just have confusion that how many qualifiers we have to send
Here is my sample code
OR REPLACE PROCEDURE xx_web_get_price (
IN     NUMBER,
IN     NUMBER,
IN     NUMBER,
IN     NUMBER,
IN     VARCHAR2,
IN     VARCHAR2,
IN     VARCHAR2,
IN     NUMBER,
OUT NUMBER,
OUT NUMBER,
OUT VARCHAR2,
OUT VARCHAR2)
QP_PREQ_GRP.LINE_TBL_TYPE;
QP_PREQ_GRP.QUAL_TBL_TYPE;
QP_PREQ_GRP.LINE_ATTR_TBL_TYPE;
QP_PREQ_GRP.LINE_DETAIL_TBL_TYPE;
QP_PREQ_GRP.LINE_DETAIL_QUAL_TBL_TYPE;
QP_PREQ_GRP.LINE_DETAIL_ATTR_TBL_TYPE;
QP_PREQ_GRP.RELATED_LINES_TBL_TYPE;
QP_PREQ_GRP.CONTROL_RECORD_TYPE;
QP_PREQ_GRP.LINE_TBL_TYPE;
QP_PREQ_GRP.QUAL_TBL_TYPE;
QP_PREQ_GRP.LINE_ATTR_TBL_TYPE;
QP_PREQ_GRP.LINE_DETAIL_TBL_TYPE;
QP_PREQ_GRP.LINE_DETAIL_QUAL_TBL_TYPE;
QP_PREQ_GRP.LINE_DETAIL_ATTR_TBL_TYPE;
QP_PREQ_GRP.RELATED_LINES_TBL_TYPE;
VARCHAR2 (240);
VARCHAR2 (240);
QP_PREQ_GRP.QUAL_REC_TYPE;
QP_PREQ_GRP.LINE_ATTR_REC_TYPE;
QP_PREQ_GRP.LINE_REC_TYPE;
QP_PREQ_GRP.LINE_DETAIL_REC_TYPE;
QP_PREQ_GRP.LINE_DETAIL_REC_TYPE;
QP_PREQ_GRP.RELATED_LINES_REC_TYPE;
QP_Attr_Mapping_PUB.Contexts_Result_Tbl_Type;
QP_Attr_Mapping_PUB.Contexts_Result_Tbl_Type;
INTEGER;
BINARY_INTEGER;
VARCHAR2 (240);
VARCHAR2 (60);
oe_debug_pub.debug_on;
oe_debug_pub.initialize;
:= OE_DEBUG_PUB.Set_Debug_Mode ('FILE');
oe_Debug_pub.setdebuglevel (5);
('File : ' || l_file_val);
QP_Attr_Mapping_PUB.
(p_request_type_code           => 'ONT',
=> 'L',
=> l_pricing_contexts_Tbl,
=> l_qualifier_Contexts_Tbl);
:= 1;
---- Control Record
.pricing_event := 'LINE';                           -- 'LINE';
.calculate_flag := 'Y';    --QP_PREQ_GRP.G_SEARCH_N_CALCULATE;
.simulation_flag := 'N';
.source_order_amount_flag := 'Y';
.rounding_flag := 'Q';
.manual_discount_flag := 'Y';
.request_type_code := 'ONT';
.TEMP_TABLE_INSERT_FLAG := 'Y';
---- Line Records ---------
.request_type_code := 'ONT';
.line_id := 2125125; -- Order Line Id. This can be any thing for this script
.line_Index := '1';                           -- Request Line Index
.line_type_code := 'LINE';           -- LINE or ORDER(Summary Line)
.pricing_effective_date := SYSDATE;    -- Pricing as of what date ?
.active_date_first := SYSDATE; -- Can be Ordered Date or Ship Date
.active_date_second := SYSDATE; -- Can be Ordered Date or Ship Date
.active_date_first_type := 'NO TYPE';                   -- ORD/SHIP
.active_date_second_type := 'NO TYPE';                  -- ORD/SHIP
.line_quantity := 1;                            -- Ordered Quantity
.line_uom_code := p_uom; --'Ea';                         -- Ordered UOM Code
.currency_code := p_currency_code; -- 'USD';                           -- Currency Code
.price_flag := 'Y'; -- Price Flag can have 'Y' , 'N'(No pricing) , 'P'(Phase)
(1) := line_rec;
------ Line Attribute Record
.LINE_INDEX := 1;
.PRICING_CONTEXT := 'ITEM';
.PRICING_ATTRIBUTE := 'PRICING_ATTRIBUTE3';
.PRICING_ATTR_VALUE_FROM := 'ALL';
.VALIDATED_FLAG := 'N';
(1) := line_attr_rec;
.LINE_INDEX := 1;
.PRICING_CONTEXT := 'ITEM';                                 --
.PRICING_ATTRIBUTE := 'PRICING_ATTRIBUTE1';
.PRICING_ATTR_VALUE_FROM := p_item_id;
.VALIDATED_FLAG := 'N';
(2) := line_attr_rec;
.LINE_INDEX := 1;
.PRICING_CONTEXT := 'ITEM';
.PRICING_ATTRIBUTE := 'PRICING_ATTRIBUTE2';
.PRICING_ATTR_VALUE_FROM := p_category_id;
.VALIDATED_FLAG := 'N';
(3) := line_attr_rec;
------ Qualifier Attribute Record
.LINE_INDEX := 1; -- Attributes for the above line. Attributes are attached with the line index
.QUALIFIER_CONTEXT := 'MODLIST';
.QUALIFIER_ATTRIBUTE := 'QUALIFIER_ATTRIBUTE4';
.QUALIFIER_ATTR_VALUE_FROM := p_price_list_id;
.COMPARISON_OPERATOR_CODE := '=';
.VALIDATED_FLAG := 'Y';
(1) := qual_rec;
.LINE_INDEX := 1;
.QUALIFIER_CONTEXT := 'CUSTOMER';
.QUALIFIER_ATTRIBUTE := 'QUALIFIER_ATTRIBUTE2';
.QUALIFIER_ATTR_VALUE_FROM := p_customer_account_id;
.COMPARISON_OPERATOR_CODE := '=';
.VALIDATED_FLAG := 'Y';
(2) := qual_rec;
.LINE_INDEX := 1;
.QUALIFIER_CONTEXT := 'CUSTOMER';
.QUALIFIER_ATTRIBUTE := 'QUALIFIER_ATTRIBUTE40';
.QUALIFIER_ATTR_VALUE_FROM := p_customer_category; --'INDUSTRIAL';
.COMPARISON_OPERATOR_CODE := '=';
.VALIDATED_FLAG := 'Y';
(3) := qual_rec;
QP_PREQ_PUB.PRICE_REQUEST (p_line_tbl,
-- Return Status Information ..
:= x_return_status_text;
:= x_return_status;
:= x_line_tbl.FIRST;
IF I IS NOT NULL
THEN
:= x_line_tbl (I).unit_price;
:= x_line_tbl (I).adjusted_unit_price;
END IF;
xx_web_get_price;
Regards,
akil.

API for Shared Review in Acrobat SDK

Hi,
I would like to implement the functionality for Shared Review programmatically.
Right now we need to open each pdf file select Comments -> Send for Shared Review in Acrobat Professional and follow the steps in wizard.
I am looking at achieving the above steps programmatically so that I need not open each pdf individually and run through the wizard. For this, is there any API available either in Acrobat 8.1 or 9.0 SDK which I can make use of and build an automatic service.
A swift response is appreciated.
Thanks & regards,
Rajeev

is there (today - 2011) really still no API for that?
Also not in LiveCycle Server?
Thanks,

Java API for working with digital signature.

Hi,
     I have to check whether a pdf form is modified since it is digitally signed, using a java program.
     Are there any java APIs(provided by SAP) available for that?
     Can I use IWDPDFDocument API in java program? I tried it but I am getting 'classnotfoundexception'.
Thanks,
Prabhakar.

may i know what service pack of SAP NetWeaver Developer Studio version are you using?
as the "IWDPDFDocument" is only available on SAP NetWeaver 2004S SPS 10 and above
and you just need to import either this two class
com.sap.tc.webdynpro.clientserver.adobe.api
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.api
hope this information could help you
Regards
Jia Jun

Android API for AnyConnect ICS+ available?

Similar Messages

Maybe you are looking for