Android remote iTunes app no longer works after 10.5.2 upgrade.

Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine. After this upgrade, my tablets no longer show up as "devices" in iTunes. Am I the only one to experience this?

Thanks for your replies.
I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
Thanks,
Danny

Similar Messages

Installed Apps No Longer Work After 3.1.3 Upgrade

Last night I upgraded to 3.1.3, and since then NONE of the Apps that I installed works... Each time I try to open any of them, it will open and stop just as quickly, taking me back to the Home screen...
I thought at first it was only the Apps that required Internet Access (IM and/or Email Apps)... However, I was able to open a web page using Safari, and the Email App included in iPhone STILL works... And, like it would normally do, it would check first for a local wireless network, and switch to 3G if it does not find one... However, in this case, when trying any of the Apps I've installed, it does not even check at all for a network or 3G, the Apps just shut down just as quickly as I launch them...
Since then I've discovered that ALL the Apps I've downloaded and installed prior to the upgrade no longer work...
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Any information would be appreciated...
Thanks for your time...

TainoV2 wrote:
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Did you try a reboot (by means of BOTH the Sleep and Home buttons and holding both IGNORING the slide to turn off, and keep holding until you finally see the Apple Logo?)
Message was edited by: DaVBMan

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

Apps no longer work after installing ipad2 update 4.3.5

Apps no longer work after installing IPad 2 update 4.3.5

i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Mail App no longer working after 2.0 upgrade

I upgraded to 2.0 on my IPhone Edge and now my mail application no longer works AT ALL. If I try to open it, it simply shows me a blank mail screen, waits for a few seconds and then returns to the home screen. Strangely enough, I have been able to send email photos using the camera application.
Email is the most important application for me on the iPhone! Has anyone encountered this problem? Is there a fix available?

I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

App No Longer Works After Creating EJB Session Bean

I am using EJB3.0 and using JDEV 11g, PS1. I have used EJB to create my entities from tables and then i created my ejb diagram. After doing that my application (i have a jspx page) that runs fine. Once I create my session bean, I am no longer able to run my application. After creating my session bean I get the following error when I run the application (i.e. not at build/compile time).
<Feb 12, 2010 3:28:57 PM PST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1266017332257' for task '5'. Error is: 'java.lang.ClassNotFoundException: javax.faces.webapp.ConverterELTag'
java.lang.ClassNotFoundException: javax.faces.webapp.ConverterELTag
If i delete the sessionejb.java, ejbbean.java, and the ejblocal.java files, I am able to run my application again. Am I missing something or is this a bug?
Thanks.

Did you solved the problemn? I'm getting this, when I try run my App doesn't work, but if I deploy to WLS Integrated and go to URL it's work...

My Spreadsheet App no longer works after downloading the new ios7 software update.

My spreadsheet app. on my iphone 5 ( that i had been using) is no longer working since the new ios7 update. So how can i solve this problem?

check whether the App is compatible with ios 7, contact the app developer, or wait for the app update.

3rd Party Apps No Longer Work After Update

I just got my iPhone today and installed a few apps, Cube and GuitarChords. Both apps were working fine earlier. Later I connected the phone to my PC and it requested that I perform an update to v2.2, which I did. After the update, neither app would start. When I pressed the icon, it seemed to start for a few seconds then went back to the main screen. I reinstalled the apps and GuitarChords worked, but Cube still wouldn't start. I then did a hard reset (holding home and lock button) and now neither app will open again. All the apple apps start fine. Can anyone tell me what I need to do to get the apps working again?
On a similar note, how would you guys rate the stability of the iPhone at this time. I mostly use my phone for business, so if it's still pretty buggy I'd like to return it and get back on my Win Mobile phone for now. Thanks in advance!

IT DID IT AGAIN!!!
I didn't change or update anything. I was using the Touch Term ssh client this morning and it was working fine. I tried using Win Admin later this afternoon and it wouldn't start, none of the 3rd party apps would. Again I tried the soft and hard resets. I even tried resetting the phone in the general menu. After looking around online, I see that this is an extremely common issue. I'm going to return the iPhone tomorrow and have my Tilt reactivated.
I don't know if Apple monitors these forums, but if so they should take note; if they intend to make a dent in the enterprise market, stability needs to be a top priority. Sure, Windows Mobile doesn't have a very pretty or friendly interface, but it's quite reliable. In the year that I had my Tilt, it crashed once, and that was the fault of buggy software I had installed. Honestly, this being the first Apple product I've personally owned leaves a poor impression of the brand. I know Apple can do better, I manage several Macs at work and I almost never get support calls from those users. I really like the iPhone, and hopefully Apple can get their priorities straight and work out the issues, as I would like to give it another go in the future.
Thank you again to those who responded to my question earlier.

Garmin ANT+ agent app no longer works after upgrading to Yosemite

Hi,
I have ANT Agent for my Garmin watch (version 2.2.2 - latest) which worked perfectly in Mavericks but no longer works in Yosemite.
Can anyone help?

ewaller wrote:
Hello,
Welcome to the forums. Your post is fine in every way. Introduction, problem description, what you have done -- perfect. The package you reference is from the AUR which, as you know, is not in the main stream Arch distribution. These community contributions are essential Arch, but have their own area in the forum to differentiate them.
Moving this thread to AUR issues...
As it turns out. This isn't a bug in AUR/easystroke. It is a bug in the latest xserver 1.10.902 (found in the "extra" repo) Many applications are affected. Opera, chrome (if you are using the mouse gestures features for navigation) and it turns out that while i thought Maya wasn't affected, in reality, it is totally affected. most applications that use a mouse with right-clicks, middle clicks do not work properly.
it's an upstream bug, that affects all distributions using the latest Xorg. I am not filing a bug report, because as i understand it, this bug has already been reported upstream by Ubuntu-devs (on launchpad).
that latest update for Xserver, should have been tested better, before being an update available through pacman.
On my system, i do not use any testing repos, only core, extra, and community. I do this to avoid situations, just like this. lol.
I have work i need to get done today, but unfortunately, the only way that could happen is if i downgrade xserver (which i don't think is a smart idea). So, i guess i must wait for the next xserver update for arch. hopefully this happens in the next 24hours.
I suppose i will have to use OSX for now, until this is properly addressed and fixed.
anyway, i just wanted to point out that this bug has nothing to do (specifically) with Easystroke or AUR, that is just how i first noticed the bug. ( i just wanted to point that out, as you are a moderator ). This bug is in the main repos for Arch, and anyone updating today (or yesterday) will be affected, if they use applications where it's noticable.
jordan

Many Apps no longer working after software update

I recently updated my iPhone software and since then many of my apps don't work. usually wat happens is that when i click on an app the screen will go black for a few seconds then go back to my home page.

Many applications aren't yet update for compatibility with the 3.0 software... that could be a part of the problem with some of your apps.
Suggest you try the following 2 steps. Do the first step and see if that fixes the problem If not, do the second.
Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

W520 webcam no longer working after Windows 8.1 upgrade

Hello,
I upgraded my w520 from Win 7 to Win 8 last year with zero problems.
Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera.
In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly."
But it does not work properly.
Did anyone get the camera to work or is it just a matter of waiting for a driver to be released eventually?
I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
Thank you!
Solved!
Go to Solution.

try getting the communicastion utility installed under 8.1. The crossed image is the cameras security mode.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Mail search no longer works after 10.7.2 upgrade

The search field in the upper right hand corner no longer returns any results, from any mailbox, regardless of the text I type in. This was working fine until I upgraded to 10.7.2. I absolutely rely on the search feature as my mail messages are a wealth of information for me.
Help!
Brian

I've managed to get it working after trying the following:
1. Used Disk Utility to repair permissions on my main drive
2. In Terminal used the comand "sudo mdutil -v -i on /"
That tells spotlight to turn indexing on for that drive.
3. Did a restart
I'd recommend trying the permissions and a restart first and if that doesn't help then try the command line fix.
The first time I ran it without -v so got no feedback on what it was doing. Stopping it and trying to do it again gave me the message "Error: Index is already changing state. Please try again in a moment." After the restart it now says:
Indexing enabled.
Scan base time: 2011-10-19 07:40:10 +0100 (60 seconds ago), reasoning: 'scan not required - avoided catchup scan'
Now mail is back to how it was before the 10.7.2 update, happy days.

AirPrint no longer works after 10.6.5 upgrade

I followed the instructions in the following discussion thread (i.e. ran the mentioned script) and Print was working perfectly from my iPhones and iPad. Then other day I updated the OS to 10.6.5 and printing no longer works. I assumed that the changes were overwritten by the OS update so I just ran the Script again, same as before, however Printing still does Not work. Please advise. Could it be that Apple realized this work around and plugged it just to **** their "valued" customers.
http://discussions.apple.com/thread.jspa?threadID=2658720&tstart=0
Thanks in advance.

Then other day I updated the OS to 10.6.5
The other day?
Your post in the other thread on 29 November shows you had 10.6.5 installed.
Also I can't explain why but it most certainly did work with the previous OS X
AirPrint is not dependent on the OS
It is dependent on the printer firmware. The printer needs to be on the local network and does not need to be connected directly to a computer.
The fix in that other thread allows iPads to print to printers connected to a Mac.
The code that allows this was not present in Mac OS prior to 10.6.5
If it worked previously, it sounds like you have an AirPrint compatible printer.

Android remote iTunes app no longer works after 10.5.2 upgrade.

Similar Messages

Maybe you are looking for