Android to IOS
I recently swapped from Android to IOS, can i download the app from the app store and not have to pay for it? Its like $4.99 on the app store but when I first downloaded Photoshop Touch on Android it was $9.99. The $4.99 by itself is definetly worth it but at that point i have paid for the app 3 times!
No there`s no way you only can pay 3 times.
Similar Messages
-
I'm interesting on buying a Firefox Smart Phone, but
I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
Something like Cisco Jabber for Android o iOS.
Thanks,Hi Itech,
If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
You may also search Firefox Marketplace for an alternative solution:
* [https://marketplace.firefox.com/]
- Ralph -
What is difference between Firefox OS and Android or iOS?
What is difference between Firefox OS and Android or iOS?
kingofhawks, Firefox os is open source, offers the ability of do not track and has many great customization options. It is currently however targeted at 3rd world countries and/ or underdeveloped countries so it isn't recommended to use this if you're use to using Android and iOS at this moment. If you have any further questions, please do not hesitate to ask.
Thanks -
I have my Windows Server 2008 standard installed with RRAS service and configure with L2TP VPN with pre-shared key. Services such as Active Directory, DHCP and DNS are not installed. The Internet connection doesn't pass through a router to my server machine.
I have the Verizon fios Internet cable plugged in to the server machine directly.
PCs running Windows and Mac OS X can connect to the server without problem. When I tried to connect by using android or iOS mobiles and tablets, they cannot connect to the server. If I change the VPN type to PPTP, the mobile devices can connect successfully
but I would like to use IPSec/L2TP since it's more secure.
I tried so hard to look for the solution for this issue on Internet but I had no luck on that. Can anyone please provide me some help, please ?
Thanks,
CKHi CK,
I think we may need to create a policy in Network Policies. Please follow the steps below,
Right click Network Policies, Click New.
Enter the policy name, click Next.
Click Add, select the Day and Time Restrictions, click
Add.
In the Day and Time Restrictions, choose Permited for
all, click OK.
Click Next five times(leave everything default), click
Finish.
Move the policy to top and try to connect with your device.
If issue persists, please make sure that the Connection Requet Policies have been configured properly.
For detailed information about how to create a network policy, please refer to the link below,
Configuring NPS network policies
http://technet.microsoft.com/en-us/library/dd441006.aspx
Best Regards.
Steven Lee
TechNet Community Support -
I am using adobe ams(development version) to record video files in mp4 format using rtmp protocol. I am using mp4 as the file extension and as the stream specifier(codec).The videos are saving correctly.When i copy these files on a mobile device(android and iOS) they are not playing.Can somebody tell what I am doing wrong.
The rtmp url I am using is rtmp://localhost:1935/mp4:videoname.mp4Dropbox - defaultcodec.mp4
Dropbox - h264codec.mp4
These are the two files that I created .The first file is created by the default codec used by Flash player.
The second file(h264codec.mp4) is created by using Flash player 11 and as3 . I have encoded the file using h.264/AAC.
The tutorial followed for creating the second encoded file is Encoding live video to H.264/AVC with Flash Player 11 | Adobe Developer Connection
Thanks in advance . These two files stream successfully in the web application using flash player and as3 .I can play both of them in VLC too. But these files wont play on any mobile device(both android and iOS).
Please send me your feedback on this . In the meanwhile I will look into http streaming.
Any help is greatly appreciated. -
Can't use Glympse the way android and ios can use
I'm on Z10STL100-1/10.2.1.1925 bbm 10.3.3.68. Can't send my location the way android and ios can. When an android or ios user sends me glimpse message I can open it in bbm. But when I send a Glympse message to android or ios then they get a link to glympse.com. Please help.
I bounced a BBM off an iOS contact of mine and it asked if he wanted to follow my location on a map. As far as I can remember, my wife (who has a Z10) had to also click on that message to make my location viewable on a map. I don't see any difference between the two. With neither one are you able to instantly see the sender's location without clicking to open a map.
I'm only going by memory with my wife's Z10 so I might be missing something but I think it works similarly with all platforms.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
Build AS3 AIR project on Linux for Android and iOS?
We're about to use a build server for taking some work out of our hands (testing, building etc). The build server is running on Linux and therefore we would like to know if we can build the AS3 (AIR) sourcecode on the Linux environment. We usely create apps for Android and iOS.
Can anyone give some more information on this? Is it true that the ADT doesn't run on Linux?FYI, I updated my blog post. I found a program called ideviceinstaller (available in the Ubuntu repos ala apt-get install ideviceinstaller or from the website) that allows installation of .ipa files onto iOS devices from Linux.
Previously that was the only development iteration step that required a Windows VM. Now in my workflow, a VM is no longer required for iOS development. (Obviously a Mac is still required to upload to the app store at the end.)
Also, a bonus, here's a quick command to view UUID's authorized by the provisioning file inside an .ipa file:
> unzip -c Main.ipa *.mobileprovision | strings | egrep -i string\>[0-9a-f]\{40\}
<string>d9c2fee807324a18baf5a544ffa2c80f23d3****</string>
<string>f634a0a95bc2327f6a26cb39cf18a01918cf****</string>
<string>651e4284467d328e37c18988c981179b5909****</string>
<string>c11d7eef800632d072da067d9b993624f25b****</string>
<string>72d85ab26cd525a328d3a71e3fe416c61fd6****</string> -
Native Android and iOS Look & Feel with Flex
Hi. I have recently beena asked to research the use of Flex for development for mobile applications in Android and iOS. What I want to accomplish is the feeling of a native application, both look and feel. Android and iOS are very different in terms of styling components.
Can this be even be done in Flex?
Are my goals too high too achieve with Flex?
Screen shots from Flex, Android, and iOS are below.
Differences:
Item
Android
iOS
Tabs Location
Top
Bottom
Top Left Button
'Up'
'Back'
Top Left Button Icon
Application Icon
None
Top Right Button
Multiple
Single
List Item Right Carrot
No
Yes
Adobe Flex Example:
Native Android Example (Pure Android):
Native iOS Example:This is definitely possible, even easy if you jsut have the time to put into it.
All you need is an Android Theme - create custom styles for the buttons ect.
There is a discussion about it here:
https://issues.apache.org/jira/browse/FLEX-33732
And it is an open issue so at some point this will probably get incorporated into the SDK. -
Can I run an html/javascript AIR app on Android or iOS?
Is it possible to compile an already-existing HTML/javascript app to install/run it on any mobile OS (Android or iOS, in particular)? I haven't found anything that says it's possible, only instructions for doing it with a Flash/Flex based AIR app.
I have a large html/javascript app, with a lot of value put into it, and my client would like to be able to package it for use on tablets. Ideally, I'd like to be able to not only have it run there, but also be able to "hide" the html/js code from prying eyes, if there's a way to do that.
Thanks much in advance... I've done considerable research trying to get an answer to these questions.
- JackHi Ross,
the certificate used for APK files is a self-signed one so at this point, no need to use Google Console yet.
See http://helpx.adobe.com/digital-publishing-suite/kb/publishing-process-android-amazon-mobil e.html (Create a certificate file using Keytool)
Testing is only a matter of installing the APK file on the device where you should be able to test.
The Android developer account will be useful for testing if you have in-app purchases matching 'retail' folios. -
Is there any way to more chats on whatsapp from Android to iOS?
Hello! Hello!
I've got a question. I have android phone, and i'm about to buy iPhone soon.I'd like to move my whatsapp chats from android to iOS. I was searching on the website of whatsapp, but there's only information about Android -> Android and iOS -> iOS. I also googled this, and I found one instruction. But it need from me to have Windows. Is there any other way to do this, using OS X?
Thanks in advancehttp://forums.adobe.com/thread/864113?tstart=0
-
URGENT porting to Android and iOS?
I am developing a Flash game and the deadline is by the end of this month.
The game will need to be run on Android and iOS.
I tried AIR, but it runs slowly due to there being frame-by-frame bitmap animations.
Is there a good optimisation method for AIR, or should I use an API?
Can you recommend a good API?
How about Sparrow?
I need an API which I will be able to implement fast, because as I mentioned the deadline is in 9 and a half days.the only quick magic is to make sure you've enabled cacheAsBitmap and cacheAsBitmapMatrix everywhere it's beneficial and to try using gpu and cpu render modes.
otherwise, here's an excerpt from a book i wrote (Flash Game Development: In a Social, Mobile and 3D World)
Optimization Techniques
Unfortunately, I know of no completely satisfactory way to organize this information. In what follows, I discuss memory management first with sub-topics listed in alphabetical order. Then I discuss CPU/GPU management with sub-topics listed in alphabetical order.
That may seem logical but there are, at least, two problems with that organization.
I do not believe it is the most helpful way to organize this information.
Memory management affects CPU/GPU usage, so everything in the Memory Management section could also be listed in the CPU/GPU section.
Anyway, I am going to also list the information two other ways, from easiest to hardest to implement and from greatest to least benefit.
Both of those later listings are subjective and are dependent on developer experience and capabilities, as well as, the test situation and test environment. I very much doubt there would be a consensus on ordering of these lists. Nevertheless, I think they still are worthwhile.
Easiest to Hardest to Implement
Do not use Filters.
Always use reverse for-loops and avoid do-loops and avoid while-loops.
Explicitly stop Timers to ready them for gc (garbage collection).
Use weak event listeners and remove listeners.
Strictly type variables whenever possible.
Explicitly disable mouse interactivity when mouse interactivity not needed.
Replace dispatchEvents with callback functions whenever possible.
Stop Sounds to enable Sounds and SoundChannels to be gc'd.
Use the most basic DisplayObject needed.
Always use cacheAsBitmap and cacheAsBitmapMatrix with air apps (i.e., mobile devices).
Reuse Objects whenever possible.
Event.ENTER_FRAME loops: Use different listeners and different listener functions applied to as few DisplayObjects as possible.
Pool Objects instead of creating and gc'ing Objects.
Use partial blitting.
Use stage blitting.
Use Stage3D.
Greatest to Least Benefit
Use stage blitting (if there is enough system memory).
Use Stage3D.
Use partial blitting.
Use cacheAsBitmap and cacheAsBitmapMatrix with mobile devices.
Explicitly disable mouse interactivity when mouse interactivity not needed.
Do not use Filters.
Use the most basic DisplayObject needed.
Reuse Objects whenever possible.
Event.ENTER_FRAME loops: Use different listeners and different listener functions applied to as few DisplayObjects as possible.
Use reverse for-loops and avoid do-loops and while-loops.
Pool Objects instead of creating and gc'ing Objects.
Strictly type variables whenever possible.
Use weak event listeners and remove listeners.
Replace dispatchEvents with callback functions whenever possible.
Explicitly stop Timers to ready for gc.
Stop Sounds to enable Sounds and SoundChannels to be gc'd. -
Captivate 7, PhoneGap Builder on Android and iOS tablets
Hello all,
I apologize if some of these questions are basic but searching the forums and online aren't turning up any answers I can discern. My company has decided to move into the mobile market for our E-Learning content, more specifically we want our customers to be able to use our content on tablet devices. I'm creating content with Adobe Captivate 7 using HTML5 animations. I have been able to publish my project as HTML5 and then use the PhoneGap Build tool to add the HTML5 animations to the project. However, I have no experience in app development and I'm running into a roadblock when trying to publish as Android and iOS compatible apps. I'm able to add the .wgz file to the android tablet but I have no idea how to run it or make it work. We just want our projects to play on Android and iOS tablets. My questions are thus:
- Is publishing our modules in App form the only way to accomplish this?
- When trying to publish to Android/iOS I am asked for a "Package". What does this mean? I've watched the following tutorial: Package the HTML5 content for devices using Adobe Captivate 7 App Packager - YouTube but it doesn't go into detail as to what he package is.
- From what I understand Android and iOS apps need certificates and signatures. Are these required for our members to be able to download our modules and run them on their tablets? Can someone direct me to a source for me to learn about and apply for these credentials?
Any help you can provide would be greatly appreciated. Thank you!
- NickJust to clear up my third question, I'm not asking whether our customers will need a set of these credentials to access our content, I'm asking if its required I get these credentials to publish the content.
-
Access BSP Service or Workflows on Android or iOS Phones
Hi,
I have a requirement where we need to access the BSP service on Android and iOS phones. Currently we are using the same by maintaining the IP address in host file setting on individual PCs. As the host file setting option is not available for Andriod and iOS plateform (though we have some App available for Host File setting but I am not sure that they works perfectly).
The BSP service is used with PR Release workflow (Customized workflow).
Please suggest some solution that can be used to access the BSP service on Android and iOS phones or how can we use Workflows on mobile phones. Our SAP Version is ECC 6.0.
What is FQDN in BSP service and how to get the same?
Regards
AbhishekNot sure which version of LiveCycle you are using, but above links talks about the rendering of XFA forms in HTML5 (introduced with LiveCycle ES4).
Another helpful link - http://helpx.adobe.com/livecycle/help/experience-mobile-forms-capabilities.html
~ Varun -
Website to stream to RTMP and HTTP using Android and iOS
Hello, my name is Silvio Tavares, I'm from Brazil and the company where they work bought the Adobe Flash Media Server 5 to make the transmission of the station for the Website as well as for Android and iOS.
I followed your tutorial step by step and nothing more than 20x ( http://www.youtube.com/watch?v=1p27xavIWQA ) .... When I try to run the transmission in Sample Video Player he simply says I'm having a problem with my playback.
Is there anything else to be done?
Please know it must be very busy, but my job depends on it working here.
I am using Windows Server 2012.
In this tutorial does not say you have to configure any file, only the conf.xml Adone Media Live Encoder.
Please help me!Hello, my name is Silvio Tavares, I'm from Brazil and the company where they work bought the Adobe Flash Media Server 5 to make the transmission of the station for the Website as well as for Android and iOS.
I followed your tutorial step by step and nothing more than 20x ( http://www.youtube.com/watch?v=1p27xavIWQA ) .... When I try to run the transmission in Sample Video Player he simply says I'm having a problem with my playback.
Is there anything else to be done?
Please know it must be very busy, but my job depends on it working here.
I am using Windows Server 2012.
In this tutorial does not say you have to configure any file, only the conf.xml Adone Media Live Encoder.
Please help me! -
Push Notyfication in Android and iOS
Is there any way to write a AIR mobile app (Android and iOS)
and push notyfications from external source to aplication when the application is not running?
Is it only possible with native extensions for AIR? Can native extension been add in FlashBuilder?Push notifications support for iOS has been added in AIR and will be available soon in prerelease. You can learn more about the next AIR mobile and desktop features by applying for our private prerelease program. By doing so, you'll get to know the features of the upcoming release in advance!
-
Incident Management System for Mobile Phone (Android and IOS)
Dear Solman Gurus,
We have already Incident Management System in our Solman 7.1 .
We are using it efficiently, but we want to use it in mobile phones also(android and ios).
Also we have a web link and we can manage our incident management system in this link http://xxsolman.xxxxxxxx.com:8006/support . We are using for WEB also for Incident Management System.
My question is ; how can i use it for Mobile Phone Operation systems(android and ios) ? Which guide should i follow ? Should i upgrade pacth or something in our solman ?
Looks like Android application is : SAP IT Incident Management
Best RegarsHi Kemal,
You need to adopt the Mobile strategy for ITSM to use this. Broadly speaking, the ITSM apps can be accessible either via internet or intranet. If you plan to use the apps outside your company network then you would need Sybase tools to enable this as shown below;
The detailed information is available here
Mobile Applications for SAP IT Service Management - SAP IT Service Management on SAP Solution Manager - SCN Wiki
Regards,
Vivek
Maybe you are looking for
-
I have filled out an iPhoto "postcard" format with a message and photo, etc., and when I hit send, I get the message "The email server didn't recognize your username/password combination." I hit OK but it does not clear to refill the log-in -- and I
-
Dear All, I work at a radio astronomy research centre. We are about to move office to be close to one of our radio telescopes and this means that we must use USM instead of GSM for our calls etc. I love my iPhone (and iPad) but I have been told that
-
The buttons on the top row of my computer is there a way to tun off and on?
the buttons on the top row of my computer is there a way to tun off and on?
-
Cs4 reinstallation invalid serial number
Hello, today i tried to install Cs4 Design Standard (after downloading the installation program from adobe) on my new mac pro. I bought CS4 in 2010, but my new mac has no CD Drive. The serial number is invalid and i don't know why! Could you please h
-
Mac OS X 10.2.8 update
How do I update my ibook to 10.3 or higher - is it worth doing? I can't use my nano with what I have.