Andy's Region Blur - Hot key for "center" radio button???

Hi... I am loving Andy's Region Blur! I have an ongoing project editing courtroom footage that requires concealing multiple identities. Andy's Region Blur is HUGE!!! Since I am using it extensively, i am trying to figure out how to assign the "center" radio button to a hot key on a FCP keyboard. Does anyone know if this is possible??? It's the little things that make the difference...

I think you might have to ask Andy to tweak the FXscript to enable such a feature... not sure...

Similar Messages

  • Hot Keys for CW command buttons

    Does anybody know of an easy way to assign hotkeys (or shortcut keys some
    peope call them)
    to CWUI command buttons in VB? Basically I want to use F1 to operate the
    first command button
    F2 the second one and so forth. In CVI this was easy but I can't find an
    effective way of doing it in VB
    paul

    You will have to use the Form's KeyPreview property and create a KeyPress (KeyDown or KeyUp) event procedure for the form that calls the subroutines associated with each command buttons click events. See the attached example.
    Attachments:
    cw_hotkeys.frm ‏22 KB
    cw_hotkeys.vbp ‏1 KB

  • What is the diffrence  between "Key to Select" and "Selected Key" while creating Radio  Buttons?

    While creating radio buttons there is a confusion regarding two properties "Key to Select" and "Selected Key".Can anybody explain it with example?
    Thanks,
    Vimal

    Hi Vimal,
    Please find my explanation as below
    Key to Select: This is the unique key for each radio button to identify which one is selected
    Selected Key: This holds the "KEY" of selected radio button
    Example:
       Let us say we have 2 radio buttons : Male & Female
         Create a context attribute SELECTED_KEY of type STRING.
         Create an action ON_SELECT for radio button select event
         Now,
         the properties for "MALE" radio button as below
              KEY_TO_SELECT = 'M'
              SELECTED_KEY = "bind to the context attribute SELECTED_KEY
              OnSelect = 'ON_SELECT'.
         The properties for 'Female" radio button as below
              KEY_TO_SELECT = 'F'
              SELECTED_KEY = "bind to the context attribute SELECTED_KEY
              OnSelect = 'ON_SELECT'.
    If we select radio button 'Male', we get the key as 'M' and for 'Female' radio button 'F'.
    check inside the event handler method ONACTIONON_SELECT, you get the 'KEY' of selected radio button.
    So, the context attribute 'SELECTED_KEY'  gets filled with the key of selected radio button
    Hope this helps you in distinguishing the 'KEY TO SELECT' & 'SELECTED KEY' .
    Regards,
    Rama

  • Andy's Region Blur 3 filter

    I've applied Andy's Region Blur 3 filter to my clip.
    1. The blur appears in the center of the frame. How do I move it over the person's face? With Image + Wireframe on, it moves the entire video.
    2. How do you set it up so the blur follows the persons face from frame to frame?
    Thanks.

    I've not used Andy's plugin (though I'm sure it's awesome)
    Check my reply to your earlier message for a way to do it in FCP...
    ...or someone may chime in with the solution to Andy's blur.
    ; ]

  • Hot Keys for TextBoxes

    Hi all,
    I am working on MAC OS X and create an application in java using Net Beans 5.5 .
    Application shows 3 controls on a dialog having
    one label, one textbox and a button control.
    I have set hot keys for both label and button by putting
    '&' in their name like "My&Label" and "My&Button"
    when i run the application And press (Alt+ L) focuse is not going on Textbox but when i press (Alt + B) then button click event is working
    how do i set hot keys for a textbox in front of a label control
    thanks in advance

    I think you need to set the setLabelFor and setDisplayedMnemonic properties of the label.
    From the API docs:
    If the displayedMnemonic property is set and the labelFor property is also set, the label will call the requestFocus method of the component specified by the labelFor property when the mnemonic is activated.

  • Set a default value for a radio button populated with a List of value

    Hi,
    I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
    <af:selectOneRadio value="#{bindings.Code.inputValue}"
    label="#{bindings.Code.label}"
    required="#{bindings.Code.hints.mandatory}"
    shortDesc="#{bindings.Code.hints.tooltip}"
    id="sor1" autoSubmit="true"
    valuePassThru="true" layout="horizontal">
    <f:selectItems value="#{bindings.Code.items}" id="si1"/>
    </af:selectOneRadio>
    I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
    Thanks

    Hi,
    this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
    Frank

  • Hot keys for the button

    hi friends,
    Is it possible to remove a mnemonic associated with a button based on the focus of the cursor?
    For example, when focus is on text field TF1, the button B1 should have a hot key ALT_B but when the focus is on textfield TF2, the button B1 should not have the hot key ALT_B.. that is, if focus is on TF2 and user enters ALT_B.. button B1 action should not be performed.
    Thanks in advance,
    regards,
    Deepa Raghuraman

    You could use Button.setMnemonic(0) (thats the method that takes an int as the argument) to disable the mnemonic. And Button.setMnemonic(KeyEvent.VK_B) to enable it again (for the character 'b').
    But don't misunderstand me either, if I open a new dialog and see a button that signifies to me : You can use ALT_B to toggle me because thats the character that has a line below it, I would be surprised it that doesn't work just a few seconds later, because some application logic took that feature away from me.
    Think about it, but otherwise the above methods should work. May you have to repaint/inavlidate the button to set/remove the underlined character

  • How about Hot Keys for the Wireless Keyboard?

    Hello all.
    Been using the iPad 2 for about 2 weeks since I got it.  Had to "ditch" the iPad Keyboard Dock and use a regular Apple Wireless Keyboard.  The good thing is now using the TwelveSouth iPad Stand, I can orientate the iPad to any of the two positions I want.
    But I miss the special hot keys on Keyboard Dock, namely the Home and Lock keys.  Kind of inconvenient pushing the Home button on the iPad 2, especially having to double-press for multitasking.
    If only the iPad's iOS allows some sort of configuration for hot keys on the wireless keyboard.  I do notice that the F5 and F6 are empty.
    Cheers

    I would only hope that the keyboard would turn off, not just when it isn't pairing with the computer, but for the keyboard that is paired (mine is) it would be best if it turned off after a period of no use. Here is what one man, not an Apple tech, said about the A1314 keyboard he was selling on ebay:
    "The keyboard automatically powers down when you're not using it and turns on instantly as soon as you start typing. This intelligent power management means you'll get up to nine months of battery life based on average usage patterns. It also has an on/off switch for when you're away from your computer for a long time."
    This doesn't indicate how many minutes of no use it needs before it 'powers down' (doesn't sound as good as really being turned off) and it also doesn't address the issue of knowing if your keyboard is on or off via the power button.
    Even my dog electric training collar blinks twice when it is turned on and blinks three times when it is turned off. The Apple keyboard needs two indicator lights, one to tell you if it is searching for pairing and the other strictly as an on off indicator. I'm not going to loose any sleep over this, but it does seem like somebody was sleeping in the design department as this keyboard is really cool, but it doesn't convey the basic on/off information to the user.

  • Hot keyes for monitor brightness on SL510

    I have very annoying problem with hotkeyes for adjusting monitor brightness! After last version of hotkeyes driver they don't work. I can't increase or decrease brightness! Pressing them down and can't change anything. And there is something more! For example I have adjusted some level from power manager and everything looks good until I don't try to manage brightness with hot keyes. I doesn't matter if i want to increase or decrease brightness, it just goes to maximum level!
    Anyone knows something for this problem?
    Many, many thanks in advance
    Solved!
    Go to Solution.

    Hi All,
    Welcome to Lenovo Forum! DaemonDriver, your name somehow caught my attention
    Understand that it seems there is problem with the brightness hotkey even with the latest hotkey driver v3.02. To further the investigation,  may i know
    what OS (home? 64bit?) are you using?
    currently using v3.02 ?
    machine type number (e.g. 7660-14A)
    power manager version?
    Hope to hear from you soon.
    Cheers,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Hot keys for Button UI Elements

    Hi All,
    Just wanted to check if there are hot keys (Ctrlkey eg CtrlC) available for Button UI Elements in Web Dynpro.
    Regards
    Nikhil

    Hi Armin,
    Thanks for the reply.
    Closing the thread.
    Regards
    Nikhil

  • Provide code for desplay radio button in POP UP window(REUSE_ALV_POP

    Dear Experts,
    I m using Function module REUSE_ALV_POPUP_TO_SELECT . I can use check box but radio button is required.  How to declared that radio button in  main Program and  I need radio button on POPUP window also along with other fields. That radio button should not display on my main selection screen, Radio Button should be display on POPUP window only .
    Pl provide me code for .....
    Thanks & Regards,
    Swapnika
    Edited by: swapnika on Nov 28, 2011 8:09 AM

    Hi,
    Using radio button for single selection.
    You can double click at  the line for the single selection instead of radio button by leaving I_CHECKBOX_FIELDNAME blank.
    Hope this help.
    Tiwa N.

  • Best Practice for validating radio buttons

    Hi,
    I'm building a form which has quite a lot of questions that a
    user answers my selecting a radio button. All the questions are
    required. Could someone please advise me what the best practice is
    for validating a radio button in a radio button group is checked?
    There doesn't seem to be much information out there on this
    one???
    Thanks...

    Have you found a solution? If yes can you please give me a
    short description?
    Thanks.

  • Position  for dynamic radio button

    Hi expert,
    i created a dynamic radio button in my web dynpro application but i want to give the position in top of the my view kindly give me on example for this issue.
    thank's and regard's
    vikash

    Use this.............
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/201ddd3b-b4ce-2b10-8883-880ae8147f89
    The sequence to place a new UIElement at the screen is as follows:
    1.Create the UIElement
    2.Create the LayoutData that fits to the Layout of the surrounding container
    3.Insert the UIElement into the surrounding container
    *Code to create new button dynammically:
    lr_button = cl_wd_button=>new_button( on_action = `CHANGE_TEXT` ).
    **The following coding changes the design of a button to "emphasized":*
    lr_button->set_design( cl_wd_button=>e_design-emphasized ).
    set the new text*
      lr_button->set_text( new_text ).
    For Step 2 and Step 3 refer code by Radhika.
    Thanx.
    Saurav.

  • Hot Keys for Switching between Applications (Equivalent to Windows Alt-Tab)

    Please help.
    For the longest time, I have had trouble finding the keys to enable a fast switch of active applications. Is there an "ALT-TAB" for us Mac lovers? I mostly want to know because when playing WoW, I'd like to be able to switch to Safari at a drop of a hat to look up info.
    Any suggestions/answers?
    -M

    The alternative command is Command-TAB.
    When WoW operates in full screen it might not work however.
    You posted in the wrong forum BTW.
    Please post in the appropriate forum next time.
    E.g. in one of the Mac OS X v10.4 Tiger forums.
    Hope this helps.
    M
    17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.4.6)   Several ext. HD (backup and data)

  • I like to manually create lists when I take notes, so is there a way to create a shortcut/hot key for different symbols in the Pages inspector?

    Not really a Pages user, but I am trying to make the switch from Word if I can figure out a few ways to customize Pages. I don't want to create a new paragraph style because I rearrange my lists a lot. I think there is a way to automatically create a custom list style, but I like to make lists manually because I frequently change things around. I would like to be able to manually add symbols. I know that Option + 8 will give me a bullet, but I would also like to use different symbols I found in inspector, like a black square and a black triangle. Anyone know if this is possible?

    If what you're looking for is a more flexible way of quickly just including any symbol of your preference when you're taking notes (without establishing a more structured list like picas suggestion) there are a number of ways to use keyboard shortcuts to get a variety of symbols. Here is a link that you can use to hopefully find what you're looking for:
    http://www.wikihow.com/Make-Symbols-on-a-Mac
    You can also try http://support.apple.com/kb/ht1343 to find other keyboard shortcuts.

Maybe you are looking for