Andydata.getObject in piecewise mode using execute immediate statement err

andydata.getObject in piecewise mode using execute immediate statement
will get ora-00600 arguments:[kopuigpfx1], [14] in Oracle 11.1.0.6 and Oralce 10.2.0.2.
andydata.getObject in piecewise mode using execute immediate statement err
andydata.getObject in piecewise mode using execute immediate statement will get ora-00600 arguments:[kopuigpfx1], [14] in Oracle 11.1.0.6 and Oralce 10.2.0.x
The following are test scripts in HR schema.
create type ob_test is object(c1 varchar2(10));
script 1: not using execute immediate statement and works fine.
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
DECLARE
p_anydata2 anydata := p_anydata;
p_value_1 VARCHAR2(4000);
p_value_2 OB_TEST;
p_result PLS_INTEGER;
BEGIN
p_anydata2.piecewise;
p_result := p_anydata2.getvarchar2(p_value_1);
p_result := p_anydata2.getobject(p_value_2);
END;
END;
script 2: using execute immediate statement will get ora-600
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
EXECUTE IMMEDIATE 'DECLARE' || chr(10) ||
' p_anydata2 anydata := :1;' || chr(10) ||
' p_value_1 VARCHAR2(4000);' || chr(10) ||
' p_value_2 OB_TEST;' || chr(10) ||
' p_result PLS_INTEGER;' || chr(10) || 'BEGIN' ||
chr(10) || ' p_anydata2.piecewise;' || chr(10) ||
' p_result := p_anydata2.getvarchar2(p_value_1);' ||
chr(10) ||
' p_result := p_anydata2.getobject(p_value_2);' ||
chr(10) || 'END;'
USING p_anydata;
END;
script 3: comment statment "p_result := p_anydata2.getobject(p_value_2);", it works ok.
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
EXECUTE IMMEDIATE 'DECLARE' || chr(10) ||
' p_anydata2 anydata := :1;' || chr(10) ||
' p_value_1 VARCHAR2(4000);' || chr(10) ||
' p_value_2 OB_TEST;' || chr(10) ||
' p_result PLS_INTEGER;' || chr(10) || 'BEGIN' ||
chr(10) || ' p_anydata2.piecewise;' || chr(10) ||
' p_result := p_anydata2.getvarchar2(p_value_1);' ||
chr(10) ||
' /*p_result := p_anydata2.getobject(p_value_2);*/' ||
chr(10) || 'END;'
USING p_anydata;
END;
Could someone tell me how to solve this problem.
Thanks a lot.
Daniel

Similar Messages

Update a date field using execute immediate statement..

I need to update a date field dynamically .
Below is the code I have written for the same..
EXECUTE IMMEDIATE
'UPDATE Temp_Emp ' ||
' SET ' || V_Fieldname || ' = ' || D_Value ||
'WHERE Emp_Id = ' || 8447;
I am getting the following error..
ORA-00904: "AUG": invalid identifier
Pls anyone have any ideas..
Thanks,
Xyz

put D_Value in single quotes like this
EXECUTE IMMEDIATE
'UPDATE Temp_Emp ' ||
' SET ' || V_Fieldname || ' = ''' || D_Value ||''' WHERE Emp_Id = ' || 8447;

Problem in Update statement using Execute Immediate

Hi All,
I am facing problem in update statement.
I am creating dynamic sql and use "execute immediate" statement to execute a update statement.
But it is not updating any thing there in the table.
I have created a query like :
update_query='Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
Execute immediate update_query using V_Id;
commit;
But it is not updating the table.
I have a question , is execute immediate only does insert and delete?
Thanks
Ashok

SQL> select * from t;
                 TID P
                 101 N
SQL> declare
2     V_Id          number := 101;
3     Table_Name    varchar2(30) := 'T';
4     update_query varchar2(1000);
5 begin
6     update_query := 'Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
7     Execute immediate update_query using V_Id;
8     commit;
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> select * from t;
                 TID P
                 101 Y

Have problem when using EXECUTE IMMEDIATE.

Hi, i'm new here... i having problem when trying to use execute immediate statement... :(
procedure code as below:
create procedure copy_row(
p_table varchar2,
p_key varchar2,
p_keyval varchar2,
p_user varchar2,
p_frmto varchar2 default 'FROM')
IS
V_SQL VARCHAR2(500);
BEGIN
if upper(p_frmto)='FROM' then
V_SQL:='INSERT INTO '||P_TABLE||
' SELECT * FROM '||P_USER||'.'||P_TABLE||' WHERE '||P_KEY||' = '''||P_KEYVAL||'''';
elsif upper(p_frmto)='TO' then
V_SQL:='INSERT INTO '||P_USER||'.'||P_TABLE||
' SELECT * FROM '||P_TABLE||' WHERE '||P_KEY||' = '''||P_KEYVAL||'''';
end if;
EXECUTE IMMEDIATE V_SQL;
exception
when others then
raise_application_error(-20000,'PROCEDURE: COPY_ROW - UNABLE TO COPY ROWS! SQL='||V_SQL,TRUE);
end;
is there any limitation on using EXECUTE IMMEDIATE command? i need to use procedure because i'm using old form builder.... but the database server was 9i which able to use this command, so... i decide to use procedure....
i've done some testing on this.... assume the structure of schema1.table1 and schema2.table1 are same....
SQL> CREATE PROCEDURE TESTING IS
2 BEGIN
3 exeCute IMMEDIATE 'INSERT INTO schema1.table1 SELECT * FROM schema2.table1 WHERE column1 = ''abc''';
4 END;
5 /
Procedure created.
SQL> BEGIN
2 TESTING;
3 END;
4 /
BEGIN
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SCHEMA1.TESTING", line 3
ORA-06512: at line 2
any idea?? or have better solution other than this?
database server:9i
sqlplus:SQL*Plus: Release 8.0.6.0.0

Do you have an access to tables you are going to insert into / select from ?
Dynamic SQL checks the access permissions at runtime, not at the compilation stage:
SQL> create user master identified by master default tablespace users temporary
2 tablespace temp;
User created.
SQL> alter user master quota unlimited on users;
User altered.
SQL> grant create session to master;
Grant succeeded.
SQL> grant create table to master;
Grant succeeded.
SQL> grant create procedure to master;
Grant succeeded.
SQL> conn master/master
Connected.
SQL> create procedure wrong_prc
2 is
3 begin
4   execute immediate 'insert into master.t select * from scott.t';
5 end;
6 /
Procedure created.
SQL> create table t (id number);
Table created.
SQL> exec wrong_prc;
BEGIN wrong_prc; END;
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "MASTER.WRONG_PRC", line 4
ORA-06512: at line 1
SQL> conn scott/tiger
Connected.
SQL> grant select on t to master;
Grant succeeded.
SQL> conn master/master
Connected.
SQL> exec wrong_prc;
PL/SQL procedure successfully completed.
SQL> select * from t;
        ID
         1And don't use literals in dynamic SQL - you should use binding variables instead.
Rgds.

Delete From More than 1 table without using execute immediate

Hi,
Am new to PL/SQL, I had been asked to delete few of the table for my ETL jobs in Oracle 10G R2. I have to delete(truncate) few tables and the table names are in another table with a flag to delete it or not. So, when ever I run the job it should check for the flag and for those flag which is 'Y' then for all those tables should be deleted without using the Execute Immediate, because I dont have privilages to use "Execute Immediate" statement.
Can anyone help me in how to do this.
Regards
Senthil

Then tell you DBA's, or better yet their boss, that they need some additional training in how Oracle actually works.
Yes, dynamic sql can be a bad thing when it is used to generate hundreds of identical queries that differ ony in the literals used in predicates, but for something like a set of delte table statements or truncate table statements, dynamic sql is no different in terms of the effect on the shared pool that hard coding the sql statements.
This is a bad use of dynamic sql, because it generates a lot of nearly identical statements due to the lack of bind variables. It is the type of thing your DBA's should, correctly, bring out the lead pipe for.
DECLARE
   l_sql VARCHAR2(4000);
BEGIN
   FOR r in (SELECT account_no FROM accounts_to_delete) LOOP
      l_sql := 'DELETE FROM accounts WHERE account_no = '||r.account_no;
      EXECUTE IMMEDIATE l_sql;
   END LOOP;
END;This will result in one sql statement in the shared pool for every row in accounts_to_delete. Although there is much else wrong with this example, from the bind variable perspective it should be re-written to use bind variables like:
DECLARE
   l_sql VARCHAR2(4000);
   l_acct NUMBER;
BEGIN
   FOR r in (SELECT account_no FROM accounts_to_delete) LOOP
      l_sql := 'DELETE FROM accounts WHERE account_no = :b1';
      EXECUTE IMMEDIATE l_sql USING l_acct;
   END LOOP;
END;However, since you cannot bind object names into sql statements, the difference in terms of the number of statements that end up in the shared pool between this:
DECLARE
   l_sql VARCHAR2(4000);
BEGIN
   FOR r in (SELECT table_name, delete_tab, trunc_tab
             FROM tables_to_delete) LOOP
      IF r.delete_tab = 'Y' THEN
         l_sql := 'DELETE FROM '||r.table_name;
      ELSIF r.trunc_tab = 'Y' THEN
         l_sql := 'TRUNCATE TABLE '||r.table_name;
      ELSE
         l_sql := NULL;
      END IF;
      EXECUTE IMMEDIATE l_sql;
   END LOOP;
END;and something like this:
BEGIN
   DELETE FROM tab1;
   DELETE FROM tab2;
   EXECUTE IMMEDIATE 'TRUNCTE TABLE tab3';
END;or this as a sql script
DELETE FROM tab1;
DELETE FROM tab2;
TRUNCTE TABLE tab3;is absolutley nothing.
Note that if you are truncating some of the tables, and wnat/need to use a stored procedure, you are going to have to use dynamic sql for the truncates anyway since trncate is ddl, and you cannot do ddl in pl/sql wiothout using dynamic sql.
John

Using EXECUTE IMMEDIATE for DML

What benefit is there to use EXECUTE IMMEDIATE for an UPDATE statement like the one below.
EXECUTE IMMEDIATE 'UPDATE mytable SET bonus = v_bonus(i)
                   WHERE empid =:empid AND sal =:sal'
                          USING v_empid(n),v_sal(i);This UPDATE sql is not dynamically created. So is there any performance benefit associated with using
EXECUTE IMMEDIATE for this UPDATE? Can't i just use a normal UPDATE without EXECUTE IMMEDIATE?

Ran these same tests with SQL_Trace turned on, ran the trace files through tkprof and look at what it tells us:
declare
begin
for i in 1 .. 100000 loop
gso_prueba_a();
end loop;
end;
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.07       0.08          0          0          0           1
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.07       0.08          0          0          0           1Now a slow one
declare
begin
for i in 1 .. 100000 loop
execute immediate 'call gso_prueba_b()';
end loop;
end;
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1     36.07      36.54          0          0          0           1
Fetch        0      0.00       0.00          0          0          0           0
total        2     36.07      36.54          0          0          0           1but with this slow one, we see LOTS of recursive SQL - the 'call gso_prueba_b' is getting parsed a gazillion times with the resulting CPU consumption
SQL ID : 1uu09hhqdp1yz
call gso_prueba_b()
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute 99989      2.42       2.72          0          0          0           0
Fetch        0      0.00       0.00          0          0          0           0
total    99990      2.42       2.72          0          0          0           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 91     (recursive depth: 1)
SQL ID : dcstr36r0vz0d
select procedure#,procedurename,properties,itypeobj#
from
procedureinfo$ where obj#=:1 order by procedurename desc, overload# desc
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        2      0.00       0.00          0          4          0           1
total        4      0.00       0.00          0          4          0           1Lots, lots more like this last one but having different SQL ID
By wrapping the procedure call in a dynamically created anonymous block, you are incurring LOTS of overhead.
What is it that you are trying to simulate.
What are you trying to do?

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Selecting data from a table using Execute Immediate in 9i

Hi,
I was wondering how I would be able to do a SELECT on a table using EXECUTE IMMEDIATE. When I tried it (with the proc below), I got the following below. Can anyone tell me what I am doing wrong?
Using Scott/Tiger I tried this:
SQL> ed
Wrote file afiedt.buf
1 CREATE OR REPLACE PROCEDURE P2
2 IS
3 v_SQL VARCHAR2(100);
4 BEGIN
5 v_SQL := 'Select * from Emp';
6 EXECUTE IMMEDIATE v_SQL;
7* END;
SQL> /
Procedure created.
SQL> exec p2
PL/SQL procedure successfully completed.
SQL> set serveroutput on
SQL> exec p2
PL/SQL procedure successfully completed.
SQL>
Thanks in advance.
Sincerely,
Nikhil Kulkarni

1 CREATE OR REPLACE PROCEDURE P2
2 IS
3 v_SQL VARCHAR2(100);
erec emp%rowtype;
4 BEGIN
5 v_SQL := 'Select * from Emp';
6 EXECUTE IMMEDIATE v_SQL into erec;
7* END;
SQL> /

Oracle 11G Copying a table using execute immediate

I want to copy the contents of one table into another using execute immediate.
This keeps failing with the following error
ORA-00903: invalid table name
ORA-06512: at "TABLE_COPY", line 6
ORA-06512: at line 8
create or replace
procedure TABLE_COPY(
TABLE1 varchar2,
TABLE2 varchar2)
is
begin
execute immediate 'insert into '||TABLE2||' (select * from '||TABLE1||')';
end;
Edited by: user9213000 on 24-Jan-2013 07:38

user9213000 wrote:
I want to copy the contents of one table into another using execute immediate.
This keeps failing with the following error
ORA-00903: invalid table name
ORA-06512: at "TABLE_COPY", line 6
ORA-06512: at line 8
create or replace
procedure TABLE_COPY(
TABLE1 varchar2,
TABLE2 varchar2)
is
begin
execute immediate 'insert into '||TABLE2||' (select * from '||TABLE1||')';
end;
Edited by: user9213000 on 24-Jan-2013 07:38The standard advice when (ab)using EXECUTE IMMEDIATE is to compose the SQL statement in a single VARCHAR2 variable
Then print the variable before passing it to EXECUTE IMMEDIATE.
COPY the statement & PASTE into sqlplus to validate its correctness.

Using EXECUTE IMMEDIATE with an NVARCHAR2 parameter

Hi everyone,
In the system I'm working on, my stored procedure receives an NVARCHAR2 parameter which contains a complete SQL statement. e.g.
'UPDATE SomeTable SET SomeTable.Value = 0'
I want to be able to execute this dynamically, using EXECUTE IMMEDIATE, but I've encountered a problem where this is apparently not supported (because the string is Unicode).
It is crucial that the string stays as Unicode, because of the data that may possible be baked into the SQL statement, and so casting it off to a VARCHAR2, or changing the parameter type, is not acceptable.
Is there a work-around for this issue? Even if it has a performance hit, it will be better than nothing :)
I've tried something like this;
declare
myVal VARCHAR2(256);
begin
myVal := 'UPDATE SomeTable SET SomeTable.Value = 2';
execute immediate 'BEGIN :x; END;' using myVal;
end;
But I get an error;
"bind variable 'X' not allowed in this context"
Has anyone any ideas?
Thanks for your help,
Chris

uhmm, I'm not sure if this is a valid testcase. the string could still be converted into ascii or we8iso8859p1 or whatever 1byte-character set you want.
What I think you should test is a two-byte character as part of SQL, PL/SQL resp. as in SQL all words are defined you can not enlarge it with a 2byte word. But in PL/SQL you could define your own variable. If this variable name itself contains a 2byte character, I guess it will fail.
(I have used l_vär and l_vér as variable names in my example)
Message was edited by:
Leo Mannhart
According to the PL/SQL Reference Guide PL/SQL consists of:
PL/SQL programs are written as lines of text using a specific set of characters:
Upper- and lower-case letters A .. Z and a .. z
Numerals 0 .. 9
Symbols ( ) + - * / < > = ! ~ ^ ; : . ' @ % , " # $ & _ | { } ? [ ]
Tabs, spaces, and carriage returns
This seems no longer up-to-date as I could define a variable l_vär for instance as long as I use a 1byte char set (like iso8859p1). The same variable name as a n-byte char set like UTF-8 will give an error as my example shows.

Using EXECUTE IMMEDIATE with XML

Database version : 10.2.0.3.0 - 64bi
Hi All,
I have a xml which is stored in a table, xmltype column.
i have target insert tables whose column names and xml nodes are same.
using all_tab_columns table i will generate columns to be passed to xmltable.
all these data i will store in variables and finally pass to xmltable as below
just want to know using execute immediate is good to use in XML?
SQL_STMT := 'insert into '||table_name|| ' ( '||V_COLUMN_NAME||')';
SQL_STMT := SQL_STMT ||' SELECT ' ||V_XTAB_COLUMN_NAME ||
' FROM TO_XML,
XMLTABLE(' ||v_xpath||
'PASSING XML_VALUE
columns ' || V_COLUMNS_DATA_TYPE
||') XTAB
WHERE Seq_NO = ' || P_SEQUENCE_NO ;
EXECUTE IMMEDIATE SQL_STMT ;
Thanks and Regards,
Rubu

1) is it OK? As I stated above, it can be made to work. It would not be my first choice, but then none of us here know the full details as well as you do so maybe there is a compelling reason to use dynamic SQL.
Here is the documentation for [url http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/executeimmediate_statement.htm#LNPLS01317]EXECUTE IMMEDIATE.
Actually now I finally realize your XML resides in table TO_XML so that means you won't be putting the actual XML into the shared pool via an incorrectly written dynamic SQL statement at least. That is what Odie and I were first concerned about with dynamic SQL usage, that the XML would be hard-coded into your SQL_STMT variable. You are simply changing the columns (in 3 locations). With that setup, you have no need for (nor can use) bind variables. The overall issue of dynamic SQL being slightly slower than static SQL still exists as the SQL statement will first have to be parsed and validated.
A larger issue in terms of performance is how 10.2 handles XMLTypes. If the underlying XML is large, XMLTable performance degrades quickly. Options around this are to parse the XML in PL/SQL or to upgrade to some version of 11 and use SECUREFILE BINARY XML as the underlying storage structure for the TO_XML.XML_VALUE column.

Using execute immediate creating a table from another

hi friend i wanted to create a table from a select statement in a pl sql procedure. i am using execute immediate but getting problems with it pls can anyone help me.
here is the query i am using
EXECUTE IMMEDIATE 'CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE '%some_string%');
i need to know if this can be done and if yes how. pls help me its bit urgent too. the schema name is same and the privileges are available to create tables too.

Your syntax is wrong.
If you would use a syntax higlighted editor, it would show.
Yout try to execute a string where another string is embedded. Please use two times single quote or use the 'q' function:
This one is correct:
EXECUTE IMMEDIATE 'CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE ''%some_string%'')';
or this one:
EXECUTE IMMEDIATE q'|CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE '%some_string%')|';
good luck

Create temp table using EXECUTE IMMEDIATE

Is there any performance issue in creating globally temp table
using EXECUTE IMMEDIATE or creating globally temp table from
SQL PLUS.
Any response will be greatly appreciated.
null

Anish,
Creating tables is likely to be an expensive operation.
Performance issues can only be considered in comparison to
alternatives.
Alternatives include: PLSQL tables, cursors and/or recoding so
that tmp tables are not required. (One of our consultants reckons
that sqlserver temp tables are usually used to get around
limitations in sqlserver, ie slightly more complicated sql
statements could be used instead of simpler sql and temporary
tables).
I would think creating the temp table once during sqlplus would
be cheaper than creating and deleting it repeatedly at run time.
Note that EXECUTE IMMEDIATE may do an implicit commit (dbms_sql
certainly does). This may be got over my using the PRAGMA
AUTONOMOUS_TRANSACTION; direction which places a
procedure/function in a seperate transaction.
Turloch
P.S. We have some difficulty in getting information back from the
field/customer sites. If you have questions and answers that are
likely to be useful to other Oracle Migration Workbench
users, and migrators in general, please send them in for possible
inclusion in our Frequently Asked Question list.
Oracle Migration Workbench Team
Anish (guest) wrote:
: Is there any performance issue in creating globally temp table
: using EXECUTE IMMEDIATE or creating globally temp table from
: SQL PLUS.
: Any response will be greatly appreciated.
Oracle Technology Network
http://technet.oracle.com
null

CREATE TEMPORARY TABLE USING EXECUTE IMMEDIATE

Hi All,
i have a question,
how can i create a temporary table using EXECUTE IMMEDIATE ??
Like:
CREATE GLOBAL TEMPORARY table new_table as (Select * from old_table);
Thanks,
Edited by: xDeviates on Jun 11, 2012 3:13 PM

It looks like you are approaching the problem incorrectly. As I suggested in Dynamic Select, it sounds like you, at most, want a function that returns a SYS_REFCURSOR (it's still not obvious to me why you would even want/ need to resort to dynamic SQL in the first place)
CREATE OR REPLACE FUNCTION get_dynamic_cursor( p_table_name IN VARCHAR2 )
RETURN sys_refcursor
IS
l_rc sys_refcursor;
BEGIN
OPEN l_rc FOR 'SELECT * FROM ' || dbms_assert.sql_object_name( p_table_name );
RETURN l_rc;
END;which you can then call from your application
SQL> variable rc refcursor;
SQL> exec :rc := get_dynamic_cursor( 'EMP' );
PL/SQL procedure successfully completed.
SQL> print rc
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        801
        20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1601        300
        30
      7521 WARD       SALESMAN        7698 22-FEB-81       1251        500
        30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7566 JONES      MANAGER         7839 02-APR-81       2976
        20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1251       1400
        30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2851
        30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7782 CLARK      MANAGER         7839 09-JUN-81       2451
        10
      7788 SCOTT      ANALYST         7566 19-APR-87       3001
        20
      7839 KING       PRESIDENT            17-NOV-81       5001
        10
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7844 TURNER     SALESMAN        7698 08-SEP-81       1501          0
        30
      7876 ADAMS      CLERK           7788 23-MAY-87       1101
        20
      7900 JAMES      CLERK           7698 03-DEC-81        951
        30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7902 FORD       ANALYST         7566 03-DEC-81       3001
        20
      7934 MILLER     CLERK           7782 23-JAN-82       1301
        10
14 rows selected.Justin

Problem using EXECUTE IMMEDIATE

Hi,
I am running the following procedure..
table emp ( empno number,ename varchar2 , dept varchar2 )
CREATE OR REPLACE PROCEDURE Sp_Test11 ( p_dept IN VARCHAR2 )
IS
m_count               NUMBER               :=     NULL;
m_sql_query               VARCHAR2(32767) := 'SELECT COUNT(*) INTO m_count FROM emp WHERE dept = ';
BEGIN
m_sql_query := m_sql_query||''''||p_dept||''''||';';
     EXECUTE IMMEDIATE m_sql_query ;
END Sp_Test11;
I am getting the "Invalid character" error on execute immediate statement when i debug ..
Please guide.

venkata wrote:
Use RETURN or RETURNING INTO Keywords in execute immediate statement.RETURNING INTO is used with INSERT/UPDATE/DELETE statements when there will be triggers that will populate something on the table after an insert or update etc. e.g. when you insert a new record and you want to return the primary key that is automatically generated from a sequence so you can use it in your code for something else.
If you are SELECTing data then you would use the INTO keyword as Gj demonstrated.
SQL> ed
Wrote file afiedt.buf
1 declare
2    v_cnt number;
3 begin
4    execute immediate 'select count(*) from x' returning into v_cnt;
5* end;
SQL> /
declare
ERROR at line 1:
ORA-06547: RETURNING clause must be used with INSERT, UPDATE, or DELETE statements
ORA-06512: at line 4
SQL> ed
Wrote file afiedt.buf
1 declare
2    v_cnt number;
3 begin
4    execute immediate 'select count(*) from x' into v_cnt;
5* end;
SQL> /
PL/SQL procedure successfully completed.
SQL>It's amazing how many people are just jumping in here with wrong answers.

Andydata.getObject in piecewise mode using execute immediate statement err

Similar Messages

Maybe you are looking for