Angle Text Question

I know I should know how to do this.....
I have a lower third animation that angles back a little bit on the right side of the animation. I want to match that angle with the text that is going to be layered over it.
What am I missing? I tried using Boris Continuum's corner pin, but I'm not having much luck there. I figure there might be something in the Motion Tab, but, so far, no luck there either.
Using rotate didn't work because I need left/right rotation rather than up/down.
Hope that makes sense...
Help if you can.
John

I find handling the anchor point with Basic 3D a bit of a pain ... so I tweaked the script and created my own hack of that filter which I like to think makes it a bit easier. Its downloadable from my webpage here: http://web.me.com/andymees

Similar Messages

Arching, angled text, large to smaller text.

Hello there, I don't know if this is the right place to post this question on, but I just wanted to know how and if a certain effect can be applied to Illustrator. I wanted to get this text shape and angle that is found on the link below which reads 'PELICANS'.
http://logopond.com/gallery/detail/187441
As you can see the 'P' starts of as the Largest letter and then the letters become smaller and at an angle, and then becoming larger again. It would be great if anyone could tell me how to do this. The only way to contact people at Logopond is by writing a public comment or forum, but not for help needed in doing certain things in a particular program. Its usually for design comments helping create brand logo and identity.
Thanks

Hello there, I don't know if this is the right place to post this question on, but I just wanted to know how and if a certain effect can be applied to Illustrator. I wanted to get this text shape and angle that is found on the link below which reads 'PELICANS'.
http://logopond.com/gallery/detail/187441
As you can see the 'P' starts of as the Largest letter and then the letters become smaller and at an angle, and then becoming larger again. It would be great if anyone could tell me how to do this. The only way to contact people at Logopond is by writing a public comment or forum, but not for help needed in doing certain things in a particular program. Its usually for design comments helping create brand logo and identity.
Thanks

Page level help text question

APEX - 4
DB version - 10g
Web server architecture - OHS
Browser - IE8
Theme - 5
I know how to set and display help text for a page item, and I see there is the option to add help text at the page level, but how does the user accessing the screen see the page level help text?
I was thinking it might be a good way to add user help guide information at the page level.
Thank you for any assistance.

I know how to set and display help text for a page item, and I see there is the option to add help text at the page level, but how does the user accessing the screen see the page level help text?Using a Help page and region accessed via a help link (e.g. a navigation bar entry), or using the <tt>apex_application.help</tt> API method in a PL/SQL Dynamic Content region.
This is covered in the APEX documentation which should be consulted before posting a question here.

Swapping images/text question?

Hi, I am moving this question to this forum from general as I got a response suggesting that dynamic html could be the solution to my problem. Any guidance on how to set up the behaviour would be much appreciated.
The problem I have is that I have created a navigation menu using plain text that changes colour on hover and two images in different divs swap images. It all works fine using a standard behaviour but now the client has asked if I can also make the opposite work ie. when the user rolls over the image, then the text changes colour. Is this possible without creating the text elements as images and swapping them using a standard behaviour?
I am not very familiar with the capabilities of javascript so some guidance would be great.
The present draft site is here, so you can see the problem.
Many thanks
Richard

Hi Richard,
I suggest you to use javascript. I will try to give you a basic examle for this problem with a short explanation. Let's say you have the following html code
Here comes the default text of the elementThe image has the id of firstimage and the div#first will be the object where the text will swapped at onmouseover event.
The code above will catch the rollower event of the #firstimaged object and will make the ChangeTextofDivIdfirst javascript function run. With the used innerHTML property you may specify any html code instead of the 'the swapping text' .
Regards
Zoli

How to transcribe text "Question x of y"?

Hello, i'm new here. I need to help with this. I'm creating
Quiz for our customers and i need to transcribe text on the
Question - "Question x of y", but i don't know where i'll find it.
Thank you!

Hi there,
The simplest way of transcribe text in Adobe Captivate is to
export the project as XML, make you changes and then import the XML
document back into Captivate...
To do this carry out the following steps...
1. Open the project you want to translate.
2. Choose File > Export > To XML...
3. In the Save as dialog browse to where you want to save
your file and then click Save
4. Using a text editor or a web authoring tool such as Adobe
Dreamweaver make your changes.
5. Back in Adobe Captivate choose File > Import > From
XML...
6. Select your modified XML file
7. Click Open
HTH
Regards - Mark

Importing desired text question.

I'm new to applescript and I was wondering if anyone had tips on how to fix this problem with this script I was working on.
If im trying to write a command into terminal it looks something like this.
activate application "Terminal"
     tell "Terminal"
     do script "sudo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'Text inserted here'"
end tell
But what I need to know how to do is something along the lines of this
set desiredtextQ to display dialog "Please enter your desired text." default answer "Text Here" buttons {"Continue", "Cancel"}
set desiredtextA to text returned of desiredtextQ
activate application "Terminal"
     tell "Terminal"
     do script "sudo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'desiredtextA'"
end tell
So basicly all I'm trying to do is take the text returned of a question and import it into a scripted terminal command.
I would be thankful if anyone had any help to share with me.

First off, avoid scripting Terminal.app. For most purposes, including this one, there is no need and you are far, far better off using AppleScript's do shell script, which can execute a shell command without needing to invoke Terminal.app.
Therefore, I'd rewrite your first script as:
do shell script "defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'Text inserted here'" with administrator privileges
Note that I've also nixed the 'sudo' component in favor of do shell script's '... with administrator privileges'.
As for the second part of your question, integrating a variable, that's just a matter of concatenating the strings using the & character:
set desiredtextQ to display dialog "Please enter your desired text." default answer "Text Here" buttons {"Cancel", "Continue"} default button 2
set desiredtextA to text returned of desiredtextQ
do shell script "echo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText " & desiredtextA with administrator privileges
Note that if the text from the dialog includes (or might include) spaces or other shell-unsafe characters you might need to quote the text, like:
do shell script "echo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText " & quoted form of desiredtextA with administrator privileges

FR cell text question

Hi there,
I'm trying to add cell text into a FR report.
Right now, I'm adding a text row under each data row that utilizes the <<CellText()>> formula to display the cell text under each data cell.
I have two questions from this...
1) This seems like a fairly inefficient method if I have a lot of data rows/columns, is there an easier way to achieve what I am currently doing?
2) Assuming this is the only way, how do I suppress the entire data row if there is no cell text data for the whole data row? I've tried using all the basic suppression options, as well as some of the advanced options (ie. Value in Cell = No Data...)
Could anyone kindly offer some suggestions, much appreciated!
Thanks in advance!

In the Advanced Options try using "Data Values in Current Row" No Data

Texting question on 3.1.3

Hi everyone! I've looked around for an answer, but I can't seem to find one.
My question is, on a 2g iPhone upgraded to the latest firmware, when texting you can type in landscape mode right? Because it was with the firmware, and not just a 3GS feature?

Landscape typing in Messages is a feature of the 3.x OS, not the hardware. It works in all iPhone models.

Parameter Text question

Anyway I can include the patch number, patch name and set name in the parameter text widow with overriding the parameter name? Also I can't seem to figure out what the plug-in option or channel option for the parameter text display does.

You can use the same FM POPUP_TO_CONFIRM and pass the ICON to the parameter POPUP_TYPE to avoid the "Question mark" icon.
Like:
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
    TITLEBAR                    = 'Test '
    TEXT_QUESTION               = 'TEST'
    TEXT_BUTTON_1               = 'Yes'
    POPUP_TYPE                  = 'ICON_MESSAGE_INFORMATION_SMALL'
* IMPORTING
*   ANSWER                      =
* TABLES
*   PARAMETER                   =
* EXCEPTIONS
*   TEXT_NOT_FOUND              = 1
*   OTHERS                      = 2
Regards,
Naimesh Patel

CS3 ratio and text question

I just don't get this ratio thing. I'm editing a project in widescreen. All of my assets show 720x480 under Video info in the project window, yet they all fit in the wide screen format in the timeline output. I don't get that because 720x480 is 4x3.
So I open the text window to insert some text and I see that that window is in the 4x3 format and I don't know how to widen it so that I can move the text anywhere on the widescreen timeline.
My main question is how to get the text window to be widescreen but if anyone can lend an explanation to this whole ratio thing I'd also appreciate it.
Thanks
Craig

There are two "Aspect Ratios." The first is the Aspect Ratio of the Frame Size. That is the 720 x 480, that you see. Then, there is the PAR (Pixel Aspect Ratio), that John T. mentioned. In SD, there are two common PAR's, that determine how the images are composed, using non-square pixels. Basically, they are 0.9 and 1.2 (CS4 and CS5 have corrected the rounding of these PAR's just a bit), meaning that for Standard (4:3), one has rectangular pixels that are taller, than they are wide, hence the 0.9 PAR and for Widescreen (16:9), they are wider, than they are tall, hence the 1.2 PAR. It's the same pixel x pixel count, but those pixels are different sizes of rectangles.
Good luck, and hope that this helps,
Hunt
PS - for 4:3 Titles, you can use the fixed Effects>Motion>Scale (unchecking Proportional), but do watch out for "stretched" Text, as it might be easier to redo, than alter those visual attributes.

International Texting Question

I have a question to clarify some things.
I am currently a Verizon customer in the USA with Unlimited Texting, data, and have 700 shared minutes with the other lines.
I have a friend in Canada, and will be sending texts from the USA. To my understanding of your post, since I am in the USA and texting someone in Canada it falls under my "unlimited texting" and is free to contact my friend. However, under your linked "more info" page, each text sent and recieved from Canada will charge me $0.20. I want to know which source of information is correct before getting surprise charges on my bill.
Thanks for any follow up information.
Message was moved by: Verizon Moderator for better exposure

If you make a plan change mid-month, you usually have 3 options. You can either BACKDATE the plan to the start of the billing cycle, have it take effect immediately, or FORWARDDATE the plan to the start of the next billing cycle.
If you activate a new texting package, and BACKDATE it, you will be charged the full amount for the cost of that plan for the month, and all of your usage will be billed under your new plan. This can eliminate overages in a lot of cases.
If you activate the new package and choose to have it take effect immediately, or at the start of the next billing cycle, only usage that happens after the plan is activated will be billed under that plan. All your previous usage will be billed under your old plan.

For all new interMedia Text questions

All,
Please post all new interMedia Text only questions on the Oracle Text forum (under technologies).
Thank you.

This can be done using triggers
Refer: How to Automate Grant Operations When New Objects Are Created in a SCHEMA/DATABASE [ID 210693.1]
Edited by: vreddy on Aug 28, 2012 10:11 AM
Edited by: vreddy on Aug 28, 2012 10:11 AM

Beginner Question: UL Nav Menu and Text Question

Ok, I appreciate the input in advance. Although I am using a Dreamweaver book and online tools like Lynda.com... there are some questions I can't find the answer too or just don't know how to articulate my issue correctly in a search browser to find the right answer...
So, my question:
I have used Spry menu's which are great, but I have taken the time to learn how to create a Pull Down Nav Menu from a Unordered List and CSS.
That UL is driven by text in the list...so what if you want to create an unordered list type Nav pulldown, but want to only use background graphics for the nav menu (i.e. text is already imbedded in the graphic from Photoshop or the graphic has no text and is just a graphic). Whenever I completely delete the text out of a List Item, that list item dissapears, which makes complete sense but begs the question of how do I create a Nav Menu with only graphics that will pull down into multiple levels?
Is what I am asking not a real standard practice and I shouldn't be doing it that way?
If it were a one level menu, I know I could just use floated DIV tags, but since I have pull downs I can't see how that would work in a multiple nested pull down Nav Menu.
Again, sorry for the noob question.. and I appreciate your responses in advance.

Thanks again Murray.. and yes I am serious. I am coding two sites right now for my personal businesses. I have a decent handle on Dreamweaver (but not straight coding which I am sure will come over time through trial and error...) and I now taking courses via Lynda and reading books on PHP.
After seeing your response above, I fell stupid as that is just a failure to learn HTML which is a double-edged sword of DW.
Things are not too bad so far, but I am trying to balance the need for getting the site up in a reasonable amount of time AND learning all the technology behind the site.
Since my site(s) will be actively managed, and I consider myself smart and technically savvy, I just couldn't justify paying someone to manage my sites that would need to be changed almost daily... would probably bankrupt me also.
I know some local sites for medium size businesses where they paid brand name web design companies $40-50k to design and build sites that really aren't that great..and are continuing to pay as they are active sites and they wanted someone to manage them. Other smaller companies are paying between $600 and $1,000 per STATIC page and they provided the artwork upfront and got some pretty simple web development back.
And in this economy, knowing how to design, build, and maintain a website probably isn't the worst skill to have in the event I ever find myself out of middle management CPG work
Some of my challenges I am trying to learn about right now are:
PHP & SQL for contact forms, login for restricted access, consumer feedback, etc.
RSS specific news feeds into the site
SEO
Problem is I seem to have more business ideas than time... I have worked in mid to upper mgmt for large CPG companies most of my life, and recently moved my family to Northwest Arkansas for my career. There is low-hanging fruit everywhere for internet businesses that are tied knowledge specific to the local "retailer" here..In fact, some of them I can't believe haven't been taken advantage of yet (which is why I feel time stressed in case someone else beats me too it).
Thanks again for all your help.
Tim

6230i text questions.....

Couple of i hope simple questions.
First one.. i have given my phone to a friend who has put her own sim car in this 6230i. I had set the phone so there is a short cut to SMS text messaging.. She says that she enters a text and when she presses SEND, a number is already displayed. This is annoying and we wonder where this number is coming from by default. Is there a way to ensure that when SEND is pressed that there is either no number , or your sent to the phone book to search for a person....
Second one... When texting, is there a hot key to press with toggles between predictive and non predictive text. It seems on the Nokias you have to press # repeatedly to cycle through several options.
Thx in advance guys..

First....sounds like there is a default number set under Messages>Message settings>Text messages>Sending profile>Default recipient number. Just clear it.
Regarding predictive text....you have to toggle as you describe, or otherwise go to Options>Prediction settings. I hate it. Much easier to be able to spell!
Chris
6230i (the last bug-free Nokia?)
Vodafone UK contract since 1992

Text questions for ipod touch

My girls got Ipod touches for christmas. They downloaded a free texting application. I receive copies of each text they send or receive - any ideas why?

From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Angle Text Question

Similar Messages

Maybe you are looking for