Angry, but angry...I am going to take a gun and shot to some producer...

Hi there,
I have a serious problem:
Tipo evento:   Errore
Origine evento:   System Error
Categoria evento:   (102)
ID evento:   1003
Data:      18/02/2006
Ora:      19.20.31
Utente:      N/D
Computer:   
Descrizione:
Codice errore 0000009c, parametro1 00000004, parametro2 8054d5f0, parametro3 b2000000, parametro4 00070f0f.
I have red on MS web page that this probleme can happen for CPU, PSU, Memory or other hardware. I have everything new and my pc is composed:
PSU: Enermax Liberty ATL500
CPU: Athlon 64 Dual Core 3800+
Mb: MSI K8N Diamond Bios V. 1.8
Graphic: GeForce 6800GS
Memory: Teamgroup 2gb Xtreem
Hd (System): Maxtor L160M0
Hd (storage): 2 Hitachi 80Gb.
Hd (storage): 1 Hitachi 160Gb.
PCI: SCSI Adaptec 2940
PCI: Audio Echo System
PCI: Adsl Modem Alcatel
CDrom: SCSI Pioner
CD/CDRW: SCSI Plextor PXW1210S
DVD/DRW: Sony DRU-510A
I have made some test, with the minum hardaware, PSU CPU and System disk and one memory bank, but I had alway the same error, I have changed the memory with other slotwith one bank, but alway the same error.
I am quite discourage and I fill very, but very angry...how is possible that all new items can produce this boring error. And why???
Please I need an help
Pad >:(

First of all I had to excuse myself If I have been offensive with any of you, but I hope you can understand waht is my feeling in this time. I am like a man in a middle of the river flooding down on the fall.
Quote from: Tiresmoke on 19-February-06, 08:39:13
Auto settings for memory in a computers Bios does not work in all cases. Some memory makers like to set their SPD or built in memory timings for specific purposes. A64's like Low Latency RAM but that does not always mean that your memory will work at the lowest CAS Latency. Try out what is recomended and also get and run Memtest86 as it can show you if your memory is having an issue. Memory issues do not always mean bad memory and no one is going to suggest you have bad memory until it is tested. However Memtest can also show if the timings are too tight in many cases. It will depend on which tests fail. If it fails on test 5 or 7 then it is timings. any other failures show bad RAM.
Modern memory also in most cases depends on a bit more VDIMM (Memory Voltage) to work within specs.
You can find plenty of info on these topics if you start doing a tad of research.
Now the problem can be there or it could be comething else. However most A64 based issues are usually poor power on the 12v rail or memory issues. That does not mean it can't or won'ty be something else. However based on experience these are the best places to start. Get rgese right and if it is something else it will become easier to locate.
Well, I have used memtest for 10 hours and I didn't get any error...but alwasy rebootin system....
Yes, is true, in my bios the memory is set auto and I dont know where to start to set the right settings.
Here the setting from A64http://i1.tinypic.com/o0o683.jpg
Thank
Pad

Similar Messages

  • I've never run verify disk permissions before, but I finally have, and it says it's going to take an hour and 35 minutes to complete.

    Although it keeps actively finding problems with the disk, the progress bar hasn't changed for more than a half an hour, and it still says it's going to take an hour and 35 minutes. I'm starting to worry it will never be done! My laptop, a Macbook Pro, is pretty old - about five years, and I don't know if the fact that I've never run a verify disk permissions before has anything to do with it.
    The only non-greyed out option is to currently 'stop permission verify'.

    Just let it run, it probably won't take that long. Also you may benefit from reading Disk Utility's Repair Disk Permissions messages that you can safely ignore.
    Roger

  • I'm trying to restore my iPod and the update says it's going to take 9 hours and then after 2 hours or less it will say something about "unable to finish update." Why is this?? My iPod is a 3rd generation that I got from my brother.

    I'm trying to restore my iPod and the update says it's going to take 9 hours and then after 2 hours or less it will say something about "unable to finish update." Why is this?? My iPod is a 3rd generation that I got from my brother and even when I download an app that doesn't require my iPod to be an iOs 4.3, it will download, but it won't open.

    Did you check your security software settings to be able to restore? iTunes for Windows: Troubleshooting security software issues

  • I'm trying to download an episode of Dr. Who but it keeps telling me it's going to take 24 hours, and then it crashes and says "there was a problem downloading an unknown error occurred 50.  Any Ideas on how to fix it?

    I'm trying to download an epsiode of Dr. Who, but the download is saying it will take 24 hours, and then it stops and says "there was a problem downloading; an unknown error occured (50).  How can I fix this?  I don't think it's my internet, it's really pretty fast. 
    Thanks! 

    Try fixing up the validation issues...
    http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.stereogol.com%2Faudi o%2Fwimpy_podcast.php
    Not promising it will help, but it's worth a shot.

  • Its working just fine but does it look good? Take a look and give me your advice!

    I got to say that this is my first finnished labview program, and  it's working fine, almost no problems. But i'm not that shure about
    this huge while loop with all its instructions. Normaly a while loop takes 1 ms to iterate once, but this loop takes more than one ms,
    I'm using another subVI to catch data up to 5 ms. / sample as output from measurement device to  the while loop in this Sub vi, and then from this sub VI i'm initializing the data value read from the Measurement device, to a global variable that i read in this huge while loop.  I belive that the subVI while loop iterates several times before the huge loop iterates once. Meaby thats why my graphs for the data are plotting more than one data at a time.
    Take a look and give your advice, it seems that all the measurements are well. And I don't really got problems with the program when running, exept from small delays when I switch the sample rates.
    Regards
    Zamzam 
    HFZ
    Attachments:
    WhileLoop.JPG ‏354 KB

    I agree with Titou.
    Wow!  That's an eye-full. 
    There are some functions like setting audio On / Off that may not need to be in there.  Or do they?  You'd have to describe what the loop is supposed to do.  Same comment for the indicator display settings on property nodes.  Do you intend to turn them on/off a number of times during an iteration of the loop?
    You should "divide & conquer".  By that I mean, use sub-vi's that are function specific.  As mentionned by Titou, you should have a look at the development guidelines.   Basically, now that you have a working loop, you can improve it by creating some sub-vi's, revisit some items that may  not need to be in the loop.  As a matter of fact, you could create some control & indicators and maybe transform the loop into a sub-vi as well. 
    There are many Case Statements that you could convert to sub-vi's and that way, you could eliminate the global variables by using indicators and wiring directly to them.
    However, I would have to say that the value for "Write Flow Data" might become unpredictable due to race conditions.  Revisit how the value(s) are set for that one.
    But it does look like you had some fun doing this one.  Which is the most important thing.  To have fun implementing solutions with LV.
    Happy wiring!
    JLV

  • I purchased a book through iTunes and it downloaded. I synced with my iPad. It shows the book is downloading but that has been going on for two hours and i still can't open the book.

    I purchased a book through iTunes. I then synced my iPad and went to iBooks. I clicked on the book and it shows downloading but that has been going on for almost two hours and i still can't open the book. What gives? I have done this before no problem.

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
    and then the 'Report a Problem' link on its line :
    and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
    Or you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • We are watching a movie and we have been kick out. It is not coming up on recently purchase. Now we have purchased it again on the iPad but that download is going to take 30 minus

    Does Apple respond to any of these questions

    This is a user forum, you are not addressing Apple.
    Was this a rental? If so it won't show up under purchase history. Rentals are also not transferable, unless rented via computer.
    If rented on Apple TV you simply go to settings - iTunes - check for rental.

  • Going to take a Plunge And Get 9700 Pro

    As much as it hurts my wallet. I want to get it.  Why bother upgrading your system if not going to get one of the best Video cards to go with it.
    Read a few problems with these. But looks like things are fine now.
    OH the inhumanity of it all.  ;(

    Yes. There is some sort of a bios issue when using and ATI 9700 Pro AGP Card with the K7N2 (MSI 6570) Motherboard. It is fine if you use bios ver 3.3. If you upgrade your bios to 3.4 that is when you will have problems. The reason that I say this is that i built 2 Computer systems exactly the same. Except the only diffrence was the bios ver. When the system would POST some times i could get the video to work. When i would reboot the computer or turn it on then some times no video would come up. (this was before downgrading to 3.3) I thought it was memory so i had tryied swaping out DDR chips and that didn't work. Both systems are using AMD XP 2600+ cpu's. 512 MB DDR 333mhz 2.5 cas (generic). and of course ATI 9700 PRO 128 MB AGP card. When MSI updated the bios from 3.3 to 3.4 they messed somthing up in the process.  MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE UPGRADING YOUR BIOS. After updating the bios i have not had any video issues since.
    Enjoy
    Nick

  • What 24 character verification is it talking about???? I've never had so much trouble just to download something that is going to take a day and half

    I purchased the student version of Photoshop and Lightroom a few weeks ago
    I have a 19 digit code that i had to scratch to get, a 30 digit number under the bar code, and a 6 digit authorization code that seems to be completely pointless. I started off putting in the 19 digit code with all my other information, but it wanted 24. so I filled in the rest with zeros. Then it starts giving me so much trouble I don't think I'll ever attempt to get photoshop again.

    You may want to check all about serial numbers and redemption codes here: Find your serial number quickly

  • HT201210 My download for iOS 7 was interrupted, it has downloaded but not installed. it goes through routine Terms & Agreements and everything, but when i try to update it tries to verify the update then says that the update is not available.

    I dont understand, when i try to update it will go through routine apple stuff, then it it will say " Software Update Unavailable (under) Software Update is not available at this time. Try again later." The thing is that i was downloading it and my wi-fi had restarted for some unknown reason and it downloaded onto my phone but not installed. and at the moment it is really bothering me because I have waited a long time for iOS 7 and I am not being allowed to update my phone to it and i just wanted to know how to fix it. Thank you.

    I imagine a ton of people are attempting to download it right now. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

  • HT5622 Entering CORRECT passCODE, hitting DONE but keeps going back to énter passcode' and won't do anything else or let me in.

    Haven't used my Ipad for some time. Switched it on andup came énter PASSCODE''. I entered the correct Passcode and hit DONE but it just
    keeps going back to énter Passcode'and wont let me go any further. Can anyone assist please with a reason for this and/or how to be able to get in.
    Thanks.
    Margii13

    http://support.apple.com/kb/ht1212

  • I have download some podcastsand  but they are not going to the right place

    i been loading podcasts and i think that i'm doing, everything right, but my libary keeps going to recently added videos and my podcasts are going to recenting added videos and so if someone tell me or help me fix the problem it would be appreciated thanks again cory

    Are they video podcasts? That could be why .. .

  • Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
    ArealDJ wrote:
    I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

  • TS1424 Hi, I've just rented a video, which says its going to take 14 hours to download. The 48 hours it gives you to watch the video has already started an hour ago. I had a message which says that I can start watching the film now but it dosen't play. Pl

    Hi,
    I've just rented a movie, which claims its going to take 14 hours to download. Its still at it after 1 hour. To make matters worse, the 48 hours it gives you to watch it has already started and charged me an hour. There was a message to say I could start watching it now but it dosen't work. Please can you help?

    You'll have to wait till it downloads much further than. If your download says it will take 14 hours to download, you have a very slow connection. You would never be able to watch the movie until it downloads completly.

  • When i take a partial screen shot i do not know where it goes, when i take a partial screen shot i do not know where it goes because it dose not go to my desk top and i cant find it in the search thing... but i can hear it being taken

    when i take a partial screen shot i do not know where it goes, when i take a partial screen shot i do not know where it goes because it dose not go to my desk top and i cant find it in the search thing... but i can hear it being taken

    an oh! one more thing, you can change the default folder or create a new one to store all screenshots. Also you can change the file format. Look at the following links
    http://hints.macworld.com/article.php?story=20050824073301844
    http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X

Maybe you are looking for