ANI Server failed, CiscoWorks homepage blank

Hi All,
We are using LMS2.6. Now can't start ANIServer. Whenever we tried to start ANIServer with this command "pdexec ANIServer" the system reply
ERROR: Get reply from server failed:
ERROR: Daemon Manager startup in progress. Also, when we open the CiscoWorks,we can reach to login page. After login, there is only blank page.
C:\Program Files\CSCOpx\campus\bin>pdShow ANIServer
Process= ANIServer
        State  = Failed to run
        Pid    = 0
        RC     = -1
        Signo  = 1073741823
        Start  = N/A
        Stop   = 6/30/2010 5:15:53 PM
        Core   = Not applicable
        Info   = Application failed or was registered incorrectly.
We really need help and we can't run our CiscoWorks since a week ago.

You've changed your Service startup parameters, and this is breaking LMS.  You must NEVER touch the LMS Service startup parameters unless instructed to do so by TAC.
Change the startup parameter of each of the following services to Manual, then reboot the server.  LMS should operate correctly.
CiscoWorks Web Server
CiscoWorks ANI database engine
CWCS Cmf database engine
DFM dfmEpm database engine
DFM dfmInv database engine
DFM dfmFh database engine
CiscoWorks RME NG database engine
CiscoWorks Visibroker Smart Agent
CiscoWorks Tomcat

Similar Messages

  • CiscoWorks ANI server cannot connect, Joe Clark please help

    Joe, if you see this, please help
    I noticed yesterday I was getting some Java errors when opening different modules of Cisco Works, Campus Manager, RME.
    I rebooted the server and everything seemd to be working fine. I tried to set up Notification Services after the reboot and it seemed to go without incident.
    This morning Common Services shows
    "DCA Server is down or inaccessable"
    Campus Manager shows:
    "Cannot connect to ANI Server since it is down"
    Here is a clip from ani.log:
    2007/12/28 08:00:08 Thread-76 ani ERROR DBConnection$ConnectionCreator: Failed to establish DB connectivity because: java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection refused: connect
    2007/12/28 08:00:08 Discovery ani ERROR DiscoveryTimeBaseStat: Failed to enumerate Wbu table names because null
    2007/12/28 08:00:08 Discovery ani DiscoveryTimeBaseStat: {NumDevices=31}{NumDiscovered=0}{NumDeleted=0}{DPH=14695}{OPH=0}
    2007/12/28 08:00:08 Discovery ani DiscoveryTimeBaseImpl: completed: Discovery in 8578 ms
    1198846847568 December 28, 2007 8:00:47 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
    1198846910568 December 28, 2007 8:01:50 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
    1198846973568 December 28, 2007 8:02:53 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
    Reboot has not helped this morning.
    I just found out we did some WIndows patches a couple of days ago.

    Joe,
    Is there any way this could have been related to me setting up Notification Services?
    Something I noticed yesterday is that when setting up "Event Sets", nothing shows up.
    Per the document (and I saw this yesterday after a reboot of the server (most likely what caused the problem), I should see a list of items to trigger notification and I can configure nine different sets.
    But, I see "No Records" on the Event Sets page.
    I see the A,B,C etc, but nothing under them.
    After a reboot yesterday, then I saw the items and checked off for the different event sets.
    My goal is to have an e-mail alert when switch or router interfaces go down , or high utilization of fragmentation.

  • Ciscoworks Lms 3.2 giving ANi Server issue

    We have lms 3.2 configured at our organisation.But i am not able to initialise ANI server.The process is always down and not coming up.
    EDS and anidatabase processes are up.But ani server is not coming up due to which i am not able to access the CAmpus manager.Please reply asap.

    Before this below was the output then i followed one doc im attaching  it now and changed as per the instructions.Il paste the current files also.
    EnablePurgeArchives=ON
    PurgeArchivesOlderThan=180
    EnablePurgeJobs=ON
    PurgeJobsOlderThan=180
    EnableCMPurgeArchives=ON
    I have attached the doc which i followed to change the aniserver file but still did not initialise the aniserver.
    Aniserver issue .pdf is the file i followed to change the corrupted aniserver file.
    aniserver.properties is the file attached with current settings after changing.

  • "iTunes could not sync calendars to the iPhone "name" because the sync server failed to sync the iPhone".

    I get the message "iTunes could not sync calendars to the iPhone "name" because the sync server failed to sync the iPhone" every time I sync the iPhone 3GS with iTunes by USB.  Can anyone help? Please !!!!

    I posted the following to "iTunes could not sync calendars to the iPhone "xx" because the sync server failed to sync the iPhone. What does this mean??" at https://discussions.apple.com/message/15820680#15820680
    I haven't seen it mentioned but the secret is to
    Sync only selected calendars
    Select "Remove Calendars" from the popup window
    (This is ambigous: from where are the calendars removed?  From the device being synced to)
    Click apply.
    Oops!  My memory is already gone stale.  I think I left no calendars selected, then clicked apply.  Then I selected the calendars that I wanted, then clicked apply.
    In any case, I had a blank calendar on my iPad and then I had all the updated events that I wanted on my iPad.
    Thanks to all who provided some of the essential clues to resolving this problem.

  • Iphoto/MobileMe request to server failed

    In attempting to publish an iPhoto album (Life '09) on MobileMe after loading the thumbnails, I receive a message that it cannot publish that album "request to server failed". I have Life '09 version of iPhoto and my MobileMe account is working well otherwise for mail. When I look at my Gallery on MobileMe I see the name of the album I am trying to publish and only when I mouseover the blank box which should show the photos do I see the photos. beneath the box it is written, "no photos". I have previously published four albums with no problem. Is there a problem with the MobileMe Server or with iPhoto?

    It's very frustrating when these things don't work and extremely time consuming when solving these issues ...but persistence does pay off!
    Initially I had exactly the same issue. I then tested to see if I could publish another set of photos to my Mobile Me account from one of my other macs, and presto, no issues!!
    I then proceeded to copy all the photos from one computer to the other. Once done I had a dialogue box that told me there was an issue with one photo and I could not transfer it to my MacBook Pro ...that's when I found out that this photo was causing a "request to server failed" error! I deleted the photo, and tried again. Now it's happy, and my album is uploaded to MobileMe.
    Sometimes the smallest of problems become the biggest, it's worth cross checking all your bases

  • LMS 4.0.1 - ANI Server may be down

    Hi all,
    I'm facing a problem with my LMS 4.0.1...when I tried to access anything under "Admin> Collection Settings> Data Collection>" I received the following message:
    "Error while loading. ANI Server may be down. Please check for ANI Server Status in Admin -> System -> Server Monitoring -> Processes"
    And then, all fields are blank in:
    SNMP Timeouts and Retries
    Data Collection Schedule
    Data Collection Critical Devices Poller
    But everything is OK, the process is running (with busy flag set) on pdshow...I tried to restart ANIServer with "pdterm ANIServer/pdexec ANIServer" and other actions mentioned in other posts but no luck at all...
    Maybe It's related to another problem, where my shadow directory is not being updated, after change any configuration...in any device...
    Could you please help me?
    Regards,
    Vicente Pires

    Hi ,
    Found some errors and exception in the log..
    We need to follow the below steps to fix the issue::
    -we need to re-initialize the ANIdatabase ::
    1.stop the daemon manager :
    /etc/init.d/dmgtd stop
    net stop crmdmgtd
    2.Go to : /opt/CSCOpx/bin/ and issue the command :
    Run the below command:    /opt/CSCOpx/bin/perl dbRestoreOrig.pl dsn=ani dmprefix=ANI
    windows::
    NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
    3.Start the Daemon manager :: 
    /etc/init.d/dmgtd start
    net start crmdmgtd
    ***IMP***   Re-initialize the ANI database will not lose any of the history information of the device.  Also ANI database does not contain any historical information as soon as the above steps are complete you need to run and new DATA COLLECTION followed by User tracking Acquisition and then check the issue.
    Data collection:: Go to  Admin > Collection Settings > Data Collection > Data Collection Schedule   under "start Data Collection" > For "All Device"  >> click "START"
    User tracking :: Inventory > User Tracking Settings > Acquisition Actions
    hope it will help
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Error: Reconfiguring the Filr Server Failed

    I am in the midst of my first install of Filr appliance. I am doing a Large Installation of version 1. 0.1.
    All appliances are running (MySQL X 1 and Search Appliance X 2)
    I have configured Mysql and Search appliance as described in the Installation and Configuration Guide.
    When I run the Filr "Large Deployment" Server Configuration Wizard, the following happens-
    1. It starts with the Database dialog box and I am able to connect to the Mysql server- it goes through the screen,
    2. Then it prompts for Search Appliance- I key in the Search appliance details,
    3. Prompts for Default Locale- I select English-- after a few minutes it gives me an error Reconfiguring the Filr server failed
    I have tried redoing the Filr environment, but still the same issue.
    The System Service- area shows the Novell Filr status as blank (no status)- is this normal
    the logs indicate -HTTP ERROR 500, Problem accessing /vaconfig/system/logs/filr.zip. Reason: Unable to copy zipped log files to stream.
    One more thing, Where do the filr logs file reside??? which folders, I am hoping the logs will give me some clue.
    Can someone please advise.
    thanks
    Tom.

    Dear Bharath,
    Your PL is too low. Upgrade to the latest PL will solve this problem.
    Thanks,
    Gordon

  • Server failed to hotmail

    I first had hotmail as my mail app now it says "cannot get mail" the connection to the server failed" I could download emails at first but now there is nothing in my mail. When I did have mail there, I then had trouble deleting emails

    Try to delete and add the account again;
    Go to Settings – Mail, Contact, Calendars
    Click on Add Account…
    Choose Microsoft Exchange
    Fill in the fields shown (Leave domain blank and your login should be your email address)
    Click next and it will ask for server. Use m.hotmail.com
    Choose if you want your email, contacts or calendar synced.

  • How do i fix connection to the server failed with yahoo

    how do I fox connection to the server failed on my 1phone with yahoo

    Hi,
    You can try to right-click and '''Reset''' the key '''browser.newtab.url''' in [http://kb.mozillazine.org/About:config about:config] or '''Modify''' and enter '''about:blank'''.
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.
    [https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites New tab page]
    If the issue returns, you can try to check/change the '''Options''' for ShopAtHome in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions''', or in the toolbat itself.
    [https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using extensions]

  • HT1937 Hi my email is not working it says" Cannot gel mail...The connection to the server failed" but my network is working ok is the only application failing...how can I solve the problem?

    Hi, my mail applicatin is not working properly. It says cannot get main...the connection to the server failed but everything else is working ok. How can I solve this problem?

    The connectivity test indicated that there was a problem with the user's ActiveSync folder, typically fixed by checking the box "Allow inheritable permissions ...".
    Since it already was checked and even by removing the inherited permissions and then re-inheriting them didn't do the trick, I ended up just deleting the whole thing and then made a new duplicate account and blank mailbox.  That was pretty drastic
    but it fixed the problem.  After restoring his mailbox contents from backup, the user is now a happy camper.
    The connectivity test tool was helpful because the external URL was blank so I filled in the URL.  But ActiveSync was working fine for everybody without the URL before although I don't know why it did work without it.
    The other funny thing is on one of my iPads I am able to synch my mailbox and also the user's mailbox but on another iPad it just wouldn't synchronize when it worked before I added the external URL.  The iPads have the same OS version so I
    just don't understand it.  Oh well.
    Thanks for your help.  That was a good tip!
    WC

  • Cannot get maile connection to server failed

    followed the instructions for icloud set up in apple support for ipad and iphone even deleted the account and then set the account up with the correct ID and password.  I do use a different ID  than my apple ID for my icloud account.  I use my me.com email address.  I can get into the cloud on my pc and I can send and recieve email when I log into my icloud account but this fails to work on my ipad and iphone.  Attempts to seen or get email on these devices when on a wifi network end up with the message "cannot get mail connection to server failed"
    lee

    Hi HLSdoc,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/ts4002
    Issues sending or receiving mail on iPhone, iPad, or iPod touch
    Best of luck,
    Mario

  • "Connection to server failed" error with Gmail exchange server

    Hi,
    I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
    I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
    I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
    I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
    Message was edited by: KJones75

    I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
    I'm not sure why changing the password fixed the problem, but I'm glad it's working again.

  • Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

    My CEO has an ipad2 and I set it up w/ AOL.  She cannot send any email via her AOL account from her iPad.  She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed."   We've tried it on wifi and on 3G (Verizon version).  I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work.  The SMTP settings are smtp.aol.com, port 587.  I've tried adding an alternate server/smtp, but I haven't been able to find anything that works.  Any advice or other people having this issue?  It works fine sending an email from her aol web mail.  And unfortunately, having her sign up for a gmail account is not an option.  Thanks

    Interesting.  Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
    I have two email accounts on my iphone - AOL and my email from my business website.  I deleted both and then recreated first the business account and then the AOL account.  Same error.  Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result.  I still get the error "A Copy has been placed in your Outbox.  Sending the mssage content to the server failed."
    Perhaps this problem will get fixed by IOS 6.   AOL will not talk to me unless I pay and Apple says its not their problem.  So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone.

  • I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above helped, restart your router.
    No data is lost due to a reset.

  • TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

    I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
    Message is " A copy has been placed in your
                        Outbox. Sending the message content to the server failed."
    Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
    Address is fine etc.

    How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

Maybe you are looking for