Animação feita no flash cs3 nao aparece animada

fiz uma animação no flash cs3, exportei como video swf.Ao carregar este arquivo no meu site, o arquivo aparece estatico.ele não fica animao.fiz uma asa em movimento mas a asa fica parada. o que ocorre com isso?

Similar Messages

Animation problems in Adobe Flash CS3 for windows.

I'm trying to save some .gif animations, but when I save them, they don't show the movie symbols animating, just the tweens in the main scene. Can someone help? I'll post an example. In 7-21-09 2 it is supposed to flailing it's arms around while moving back and forth. Instead it just moves back and forth. In Cute Porygon, it doesn't move at all because there is no tween in the main scene, yet I have different frames of it moving in a movie clip symbol. can someone help?

I'm pretty sure you have to have all your animation present on the main timeline and not in movieclip objects.

Flash CS3, Having Problems Creating Button Animation

I am relatively new to Flash CS3, and don't use action script... I am creating an animation with sound using the button graphic option so it is a clickable button. I have the animation finished, and the sound embeded, and everything is working great, except when I publish it, I have to click and hold over the graphic for the animation to happen... If I click and release, the animation and sound clips stop... What am I doing wrong and how on Earth can I fix it??? Thank you in advance for any suggestions!!

Yup, that is how it works. You can't control which state a button is in. So when you click on it, it will go to the down state and when you let go it will go back to over (or up if you release outside).
Not sure exactly what the "fix" is. It depends upon what you are trying to do. Generally you would need to use MovieClips instead of buttons with event handlers to tell you "button" what to do. Very few people I know actually use buttons.

Flash CS3 Animation and Audio not timed properly when packaged.

I am trying to create a simulation with audio, mouse movement, mouse clicks and screen changes. When I play the movie in Flash, the animation and the audio are timed properly. However, when I package it, the animation falls behind the audio. I am using wavs for the audio - I've tried mp3s also.
I have a screen displayed with a mouse. The audio and a highlight indicate the next step, then the mouse moves and clicks the desired area - with a audio mouse click. The first "click" sound is pretty close to where it is supposed to be, but as the movie plays, it begins to occur earlier and earlier. So much so, that the audio starts to begin prior to animation is complete later in the move. This is not a real long demonstration, only about 1100 frames, but I notice the problem around frame 180.
Any suggestions?

IE stinks. There's a huge performance difference when playing
SWFs in
Firefox and IE. We have seen SWFs reach 100fps in FF 3.0
while the same SWF
taps out at around 40fps in the latest IE browser. It's not
Flash, it is the
browser.
Adobe Certified Expert
www.keyframer.com
www.mudbubble.com
(if you want to email me, don't look)
"AMK4" <[email protected]> wrote in message
news:gfk9ls$6kf$[email protected]..
> This has me baffled to no end. I have a flash file
that's behaving rather
> odd.
> Even the original author doesn't have an answer. I work
on a WinXP system,
> if
> that matters. When I test the movie within Flash CS3, it
works as
> expected: the
> animations ends as the audio fades out. When I publish
it, and I open it
> up in
> Firefox, it works as expected. But that's where it ends.
On the same
> machine,
> if I view it in Internet Explorer, the animation takes
longer - it plays
> slower. Consequently the audio ends before the animation
is done.
>
> I've tried multiple WinXP machines, they all do the same
thing. In Firefox
> it
> works as expected and the same way as previewed within
Flash CS3. But,
> viewing
> it in IE, and the animation plays longer.
>
> Wanna see it for yourself? Look at the original author's
page:
>
http://www.flashmo.com/preview/flashmo_137_intro/
>
> Open it up in IE and Firefox, side by side if you can.
Does it play
> correctly
> in both (animation ends as the music fades) ?
>
> Suggestions anyone?
>

Can i make Animations with Adobe Flash CS3 Professionals?

can i make Animations with Adobe Flash CS3 Professionals? my
goal is to make a Animation Serie But i got no Expereience!
Is it any place i can learn how to use Adobe Flash CS3
Professionals? Can i get a tutorial/training thing on
www.adobe.com?

Ha!
Just scratch the surface by using the search functions on
this site or google - thousands of
websites that showcase flash animations since version 3 back
in the late 90's - many websites have
dedicated themselves to flash training and tutorials over the
years.
Basically, anything on the web that looks animated, right
click over it and 9 times out of ten it
will say "Flash".
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Arfusman wrote:
> can i make Animations with Adobe Flash CS3
Professionals? my goal is to make a
> Animation Serie But i got no Expereience!
> Is it any place i can learn how to use Adobe Flash CS3
Professionals? Can i
> get a tutorial/training thing on www.adobe.com?
>

Flash cs3 animation freeze problem

The subject of this post is seeking help to the following
problem: As i get 3/4 through my animation my flash cs3 suddenly
freezes down on me and the only thing that helps is closing it down
from the task manager. All the other applications run perfectly
well in the background. Got a pretty good system (3GB ram, vista,
dual core processor). Can anyone help!!!

Ни когда
больше не
буду
пользоваться
adobe Flash CS3 ,потому
что он
перезагружает
мой
компьютер.
Наверное
когда её
делали
перестарались.

CS4 animation to Flash CS3?

PhotoShop CS4 NOT extended: How do you take an animation
sequence into Flash CS3 as a movie clip ready to play?
I don't want to import every single layer as an object and
then try to distribute them all over the timeline manually.
Is there some convenient alternative?

well, AS3 has completely changed but you can still use AS1 or
AS2 and publish to any older player -
upgrading the authoring tool doesn't limit backward
compatibility.
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
relief8 wrote:
> Does flash mx upgrade seamlessly to flash cs3. I am
right in the middle of a
> project and want to upgrade. I am not wanting to get cs3
and find out that the
> scripting has changed or something and my files won't
work. Does anyone know?
>

Keynote and Flash CS3

I have read the threads on lack of support for transparency in animated GIFs and QT Flash tracks. I just installed Adobe CS3 and iWork '08, and Keynote '08 seems willing to import Flash 9 files (although I have yet to try features not in Flash 5). There seems no way to specify transparency for the background in SWF, it is an option on export. Assuming the lack of support for transparency is fixed, is there hope for being able to import SWF 9 files to Keynote '08 and have them be transparent?

Welcome to the discussions, Jeff.
I don't think so. Since the Flash would be playing within QuickTime, and the problem is somewhere between Keynote's and QuickTime's interactions, that core problem would have to be resolved before transparencies would work in Keynote.
However, if you get it to work, definitely post back to let us know! (By the way, you're right that the QuickTime support in Keynote for Flash can support ANY version Flash file as long as the file doesn't use any post Flash 5 features.)
Message was edited by: Kyn Drake

Quicktime movie export from Flash CS3 is skipping frame.

When I try to export Quicktime movie from Flash CS3, the
resulting mov file is skipping frames. i.e.: The movie is showing
frame number 1, 2, 3, 4, 5, 6, 7, 7, 7, 10, 11, 12, 12, 12, 15
etc...
As you can see the frame number 7 is repeated 3 times and
frame 8 and 9 are nowhere to be found.
The last configuration I used is 960x540, Sorenson video 3
medium quality, 25 fps, keyframe every 25 frames. 6400 kbits/s.
I tried various configurations,with different codecs and even
with keyframe all frames and I always get simillar problems.
Anyone have an idea what is going on, and how to fix this?
Thank you,
Olivier.

The QT exporter in Flash is honestly my least favorite
feature - not the feature itself but how it
works (or how it doesn't work in some cases). For me it is
almost unusable unless you have a very
short timeline, small stage, lower frame rate - like AS
generated effects or something - otherwise,
for true frame accuracy to video output - it is not reliable
enough and not fast enough for any real
world production environment.
So typically for me - I love SWF2Video (www.flashants.com) as
it takes any SWF and makes it into an
AVI that is frame accurate no matter what the frame rate is -
quite incredible - enough so that I
always felt it should have been bundled with Flash (as well
as Wacom tablets).
Harmony is an incredible product - as is SOLO and TBS (Toon
Boom mStudio) - each of those programs
are dedicated animation programs designed for output to video
- Flash has a lot of hats to fill and
it was never really designed for animation to video even
though many of us have found it suitable
for all intents and purposes as an animation program for full
production.
But all in all - the quicktime exporter doesn't really
deliver how we would expect it too I am sorry
to say - I only hope it works as well as it does on the Mac
(Mac users could always choose to export
to Quicktime Video but not PC users).
For now if I am exporting to video I keep it all on the
timeline or nested in Graphic symbols or use
the SWF2Video tool.
hope this helps.
-chris
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
OBastien wrote:
> Thank you for your reply Chris.
>
> I tried different possible solutions you listed but it's
not working.
> Disabling sound had no effects. Changing the FPS is not
an option, it has to be
> 25 FPS. I lowered the resolution to 300 something, it
seemed to be a little bit
> better, but it still dropped some frame, and the image
quality was horrible.
>
> I think it is really sad that we have to try different
settings in the hope
> that flash will grab all the frames. I'm really
disapointed in Adobe. I'm
> pretty sure it is the fault of Adobe and not Apple,
because I don't have does
> problems with Quicktime in ToonBoom Harmony. What is
strange is when I do an
> AVI export I never noticed a dropped frame. I'm not
using AVI video right now
> because I can not find a codec that gives me small size,
fast encoding times,
> the ability to seek in the movie by dragging the
timeline progress bar, and the
> possibility to edit in After Effects. If you know an AVI
codec that does all
> that it would be really great news.
>
> Thank you again,
> Olivier.
>

How to creating a web banner in Flash CS3?

Hi all,
I'm very new to Flash CS3. Can anyone give me a step-by-step
instructions on how to make a banner for a web-site? Or a link were
i can find step-by-step instructions?
I have googled it but found no real help. I have tryed
"Youtube" hoping to even fine any one (most likely a child) with
directions on how to do this. Funny thing is that it seems most 8
year olds are better at Flash CS3 than I am & i'm 45.
Anyway, if you can help please make it simple or for the
simple minded. :)
Thanks to all!!
BJ

I understand your pain...I just posted a similar request
earlier today for help but finally figured it out on my own. I've
done lots of searching online and used Adobe's Flash Classroom in a
Book and also took an online ed2go class and I still don't have a
good handle on Flash. Nothing seems to give clear step by step
directions on animating images for web banners. You just have to do
a lot of trial and error. These websites may help if you don't have
time for the classes:
http://www.smartwebby.com/Flash/default.asp
http://animation.about.com/lr/flash_animation/150331/1/
mek113

Help!! Flash CS3 and CS4 "Test Movie" very slow on OS X

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

Using boundingBox in flash CS3 to use it in Flex

I am stuck with my Banner design in Flash CS3. I some
animation which is coming outsied of my scene to the scene. But
whenever I am using this swf in flex it is also showing the outside
of the screen material. I know I have to use boundinBox. I am doing
it But still it is not working. Is there any to help me out.

Yes...It worked .Thanks a lot for your help.

[Flash CS3] Resolution Issues

Hello, I've been trying to piece together a FLA for the past few days now, only to encounter problem after problem. I've managed to overcome all but one problem I have been experiencing in Adobe Flash CS3 Professional, being a resolution problem.
I've drawn 796 frames for a flash animation in Photoshop CS3 Professional using a graphics (drawing) tablet, saving them as a .JPG. Would have been smarter to use .PNG, but wasen't thinking straight at the time. After importing the files into the library 100 at a time to prevent a crash, I adjust the flash window to be 1176x894, two pixels short both width and height wise when compared to the files I will be using for the animation. This is to get rid of a tiny white line, as the files don't drop perfectly onto the flash even if they are the exact same resolution. So I plop on the cover for the animation, hitting F6 nine times to make nine extra frames for the intro. F7 for a new, blank keyframe, drop on the first (second really) frame of the animation itself...and it's not the same size.
Note that both the cover and all frames are the exact same resolution, 1178x896 with the flash being 1176x894. It shrinks anything that isn't the cover, also a .JPG, by about 65% the normal size. There appears to be no way to adjust the frames, so down goes the flash unless I really want to make it much smaller. If anyone knows a solution to this problem, I would MUCH apperciate it. :-)

Okay the most important lesson here is that when you are doing something like this test a few before you do all of them.
Well I have no idea. I was going to say that you probably saved the jpegs at a different resolution. Flash expects 72 dpi. Of course that is possible that you have different resolutions.
Also I've never had a problem where the pixel dimensions aren't what they are supposed to be. So you probably have something else going on here....

Flash CS3-Instant Demo

Hello,
I am trying to import a .swf file that was created in Instant Demo. I am using Flash CS3. The .swf animation works correctly before I import it into Flash. After I publish the animation in Flash, buttons no longer work. Any suggestions?
Thank you for your help,
J

Go to adobe's web page and download and install the latest update.

Using Flex components within Flash CS3

I'm new to Flex and I enjoy all of the components that it has
to offer, but I am wondering about their availability within Flash.
My plan is to make a highly animated and interactive menu and
I have reached a point where I have to ask two questions:
1. Is is possible to use any of the Flex components within
Flash CS3?
2. If the first is not possible, then if I make my menu and
specify "containers" within the Flash file then is it possible to
populate these "containers" with Flex components by making the
Flash (.swf) file of my menu into a Flex component itself?

No, Flex components cannot be used in Flash 8.

Animação feita no flash cs3 nao aparece animada

Similar Messages

Maybe you are looking for