Animated gif creation...

Hi - I realize this is not the right forum, but I couldn't find one for Fireworks - and it is related to web development... so...
I have used Image Ready for years now, and love the simplicity of it! Creating an animated gif is a very painless process - you have a window that can easily add frames of the animation to, set the timing, establish tween frames, etc.
Photoshop CS4 eliminated the associated "Image Ready" software - replacing it with Fireworks...
I cannot for the life of me figure out how to accomplish an animated .gif in Fireworks - the help areas offer an overview of what an animation is, but no real help (to me anyway) as to what the process is.
Can anyone please steer me in a direction that will justify Adobe eliminating Image Ready for what appears to be a "much-more-complicated-than-it-needs to-be" replacement?
If anyone has any tutorial links or other technotes they can share, it would be greatly appreciated...
Thanks,
Jesse

Hi - I realize this is not the right forum, but I couldn't find one for Fireworks
Lame.... http://forums.adobe.com/community/fireworks/fireworks_general
It would be better to post over there.

Similar Messages

ImageReady animated gif creation

Using ImageReady 7.0
I created an animated gif by putting a bunch of files named so they retained that order (1-29) into a folder and then did Import Folders as Frames. I then add times in the animation window for each frame and then save it optimized. I've always done it this way because it works and is fairly simple but I can't edit the file later and that's what I need help with.
The deals is, whenever I try to add an image or move layers all the frames end up being that layer in the animation window. All I want to do is add some new images to the end or maybe somewhere else in one of the animated gifs instead of going through the steps like before.
Can someone tell me how to do it or what I am doing wrong?
Thanks in advance!

Its been a long time since I have used ImageReady, and then it was for about year when CS3 came out. So my memory if very rusty with that program. (In other words I am hoping that I am not too far off base, lol.)
Check and make sure there are the same number of layers as there are frames. I believe there is an option in the animation palette for sending the frames to layers. Once you know that the frames and layers match (plus any additional layers you create), you can clear out the animation and reapply the layers to frames.
You should find a small icon in the upper right hand corner of the animation palette and the layers palette. Clicking them will bring up a menu that will do what you need.

CS1, CS2, CS3 Animated Gif Creation Error.

Example: http://img365.imageshack.us/img365/5665/walksz2.gif
Whenever I made an animated gif with a transparent background, the above happens. It doesn't hide the previous frame when drawing the next one. However, when I give it a non-transparent background, it is still fine - http://img59.imageshack.us/img59/8080/walklk4.gif
How can I fix this? This happens in Photoshop CS1, CS2, and CS3.
Thanks,
Dave.

Read up on "frame disposal method."
Here's a link to the online PS CS3 live documentation about the subject. This info applies to all the versions you mentioned:
http://livedocs.adobe.com/en_US/Photoshop/10.0/help.html?content=WSC40F7DA7-6F3C-40d7-8BCD -98A3B1FE7ED0.html

Is it possible to create an animated GIF with transparency in AME?

I have Adobe Media Encoder CS5.5 with Windows 7. Is it possible to save a video (I saved it as uncompressed AVI from After Effects) as an animated GIF with transparency in it (eg. black=transparent)?
I also have VirtualDub 1.9.11 but don't see a transparency option in that.
It's for the web where I'd like the normal web background to show in the black (ie. should be transparent) parts of the GIF.

Thanks. But if I wanted to keep using it it costs about £600 to buy. Would Adobe Photoshop Elements 11 be able to do this too (also, seeing as there is an animated gif creation option in AME and used to be in AE, couldn't they just add a checkbox etc. for AME/and AE for doing transparent gifs in those if they don't support it? Since transparency is a standard feature of .GIF is seems strange to allow GIF creation but not allow transparency)?

Animated GIF file Creation from no of JPEG files

Does anybody know the program to convert a many JPEG files to a single animated gif file.

Oh? And when did you ever say that? Perhaps you should provide clear questions and requirements.
[http://www.google.com/search?q=animated+gif+java|http://www.google.com/search?q=animated+gif+java]
Still, learn how to use Google.

Animated GIF transparency in Muse

I am using Adobe Muse CC 2014 and am interested in placing either a transparent animated .GIF image or an Adobe Edge Animate CC 2104 transparent .OAM image on top of
an image in the <body> section. Placing the Adobe Edge Animate .oam image results in a NON-TRANSPARENT background, even though the same background when
creating/saving/viewing the .html image in Adobe Edge Animate displays as transparent.
I created an animation with a transparent background in both Adobe Photoshop CC 2104 and Fireworks CS6, saving the file as an animated .gif. In both applications, the
background is again, transparent. Placing either of those animated .gif images on top of a <body> background image (.jpg) results in a white stroke/outline around the
non-transparent part of the animated .gif.
All help would be greatly appreciated for enabling either an Adobe Edge Animate .oam image with a transparent background, or an animated .gif file with a transparent
background to be placed on top of a <body> image in Adobe Muse WITHOUT a stroke/outline of any color. Either the steps to make this happen OR a temporary
workaround would be terrific!
NOTE: The stroke of the image has been set to NONE in Adobe Muse to remove this option as a variable.
Thanks,
Prefix

I appreciate your reply. The problem, in this case, did not lie with Photoshop or Fireworks - both of which were used in the creation of the animated images. In both
applications, adding a darker background (just for testing purposes) shows no white outline. As it turned out, the problem was due to the nature of saving (in this case)
a .gif from either a .png file (native to Fireworks), or from a .psd file (Photoshop, of course). The .gif supports transparency, but only at greater than 50%. Anything at 50% or
less (as would occur with anti-aliasing or feathering, for example) will resolve to white. Since there was feathering (and anti-aliasing) for both the transparent characters
as well as the outer edge of the sphere, saving the file as an animated .gif caused the white outline to appear.
The GOOD news is that there is a solution to the problem. I created a file with the animated images 3X larger than the final size. When the image was reduced
in Adobe Muse to the desired size, the white outlines disappeared, leaving me with what I intended as an image from the beginning.
Thanks all who replied and ultimately helped to determine first the cause of the white outlines, and then a way to "fix" the problem.
All of your help is greatly appreciated.
Prefix

Splash page with animated gif only question

Hello all:
I have a splash page (index.html) that is designed using an animated gif created in photoshop. The rest of my site is Css/XHTML, but has some divs containing animated gifs. I have two questions;
1: By using only the animated gif on the splash page, am I limiting or hindering my SEO (google, microsoft, yahoo) ranking opportunities as there is no "content" on the page that the spiders/bots can see? I went ahead and included some "content" but hid it by coloring the type the same as the background color hoping that might do something, but obviously I'm a SEO newbie so any suggestions are more than welcomed. I will include the code at the end of this post, and my site is: http://reynolds-marketing.com.
2. Is there a way to pre-load the animated gifs on my pages so that they play more smoothly and efficiently?
TIA for any of your help. Murman
The code for the splash page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Reynolds Marketing - The Marketing Resource Source</title>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
<meta name="description" content="Reynolds Marketing is a marketing services company offering a full spectrum of marketing services including: consultation, creative, production and logistical marketing services headquartered in Temecula, CA." />
<meta name="keywords" content="Reynolds, Reynolds Marketing, marketing services company, marketing services agency, full spectrum of marketing services, full service marketing agency, marketing consultant, print creative, digital printing, offset printing, website design, website development, digital marketing, digital print on demand, DPOD,Video Production, Video Production, Direct Mail, Temecula, powerpoint presentations" />
<link rel="shortcut icon" href="http://www.reynolds-marketing.com/favicon.ico"/>

<style type="text/css">

</style>

</head>
<body bgcolor="#FFFFFF" text="#FFFFFF" link="#FFFFFF" vlink="#FFFFFF" alink="#FFFFFF" id="index_" style="background-color:#FFFFFF;">
<p>

<img src="images/index.gif" alt="" width="640" height="480" border="0" usemap="#indexMap" id="index" /></p>
<p>Reynolds Marketing offers a full spectrum of marketing communications services including: consultation, creative, production and logistical marketing services located in Temecula, California. Our services include marketing consultation, press relations, public relations, copy writing, print creative, direct mail creative, video creative, web creative, interactive creative. Print production, direct mail, video production, web page creation and production. Digital print on demand, fulfillment services, powerpoint presentations, marketing communications, marketing communications conformance. To find out more about our services, please go to <a href="http://www.reynolds-marketing.com/who_we are.html">http://www.reynolds-marketing.com/who_we are.html</a> . </p>
<p>Site map:<br />
<a href="http://www.reynolds-marketing.com/index.html">http://www.reynolds-marketing.com/index.html</a><br />
<a href="http://www.reynolds-marketing.com/who_we_are.html">http://www.reynolds-marketing.com/who_we_are.html</a><br />
<a href="http://www.reynolds-marketing.com/contact_us.html">http://www.reynolds-marketing.com/contact_us.html</a><br />
<a href="http://www.reynolds-marketing.com/what_we_do.html">http://www.reynolds-marketing.com/what_we_do.html</a><br />
<a href="http://www.reynolds-marketing.com/services.html">http://www.reynolds-marketing.com/services.html</a><br />
<a href="http://www.reynolds-marketing.com/clients.html">http://www.reynolds-marketing.com/clients.html</a><br />
<a href="http://www.reynolds-marketing.com/projects.html">http://www.reynolds-marketing.com/projects.html</a><br />
<a href="http://www.reynolds-marketing.com/news.html">http://www.reynolds-marketing.com/news.html</a></p>
<p>
<map name="indexMap" id="indexMap">
    <area shape="rect" coords="296,434,342,444" href="who_we_are.html" />
    <area shape="rect" coords="228,451,286,461" href="who_we_are.html" />
    <area shape="rect" coords="296,451,353,461" href="what_we_do.html" />
    <area shape="rect" coords="364,451,416,461" href="contact_us.html" />
</map>

<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
</p>
<script type="text/javascript">
try {
var pageTracker = _gat._getTracker("UA-8703884-1");
pageTracker._trackPageview();
} catch(err) {}</script>
</body>
</html>

My guess is yes, but that is just my opinion. I believe the text/background same color idea was really in vogue back in the late 90's and we all heard that it was the kiss of death for SEO that the SE's hated them so much you got de-listed, not sure if that is a fact or not.
My bigger concern would be how many people you are losing by making them wait to get to where they want to go. I have told many a client that in some sense, the interent is too big, you have too much competition and people have thin patience for things like splash pages. The ooo and aaa effect of animated gifs is long dead...again, in my opinion.
I dont know the answer to your load question...
Gray

I would like to convert an animated Gif to .mov, will Quicktime Pro 7 do this? Should I spend the money?

Hi everyone.
I'm looking to put a few animations onto keynote and I'm making my presentation on PowerPoint.
I need to convert an animated gif into a .mov file and was wondering whether Quicktime Pro 7 does this?
Thanks

I need to convert an animated gif into a .mov file and was wondering whether Quicktime Pro 7 does this?
Since it appears QTKirk has provided the best answer for your specific work flow issue as stated, I will answer your more general question...
Yes, QT 7 Pro can open an animated GIF file and save it as an MOV file. At this time the real question is whether or not the MOV file produced is suitable for your needs. Basically the MOV file can be then then be played—but it only plays one pass in the normal playback mode. You can, of course opt to loop the playback which, for a small files, plays much as the original GIF.
Unfortunately, the "Loop" setting is not saved when the MOV file is saved, so this option must be re-initialized each time the MOV file is opened. This would not be a problem if all you are doing is openening the file in the QT 7 player and letting it play in the looped mode all day as some sort of display but would likely be an unsatisfoactory solution for sending the MOV file to someone else. You could, of course, turn the MOV file into a QTL file with the loop option set to get around this problem.
While I would be hard pressed to say it would be a good investment just for the creation of GIF movie files, QT 7 Pro does offer a lot of other features that make it a bargain utility for many quick edit requirements if you use/need them.

.mov to .gif (animated gif)

Hi Apple fans
I have the worst case never resolve to submit in the history of Apple. Have spent in total 2 and half hours on the phone with Apple customer service and nobody found an answer.
I am building up a website and I want to insert an animated background. I have spent 2 days trying to find a software that convert video (.mov QuicKTime 7) to animated GIF. So far nobody has found a way to do it.
I have a cross platform Windows XP Sp3 and Snowleopard 10.6.4 on the iMac 9.1 for start.
On the Snowleopard I have Final Cut Pro 6, iLife 09, Quick Time 7 (pro?) , Final Cut Express that can edit video. I bought Quick Time Pro especially because it has the capability to convert .mov to .gif. But it does not!!! it convert .gif to .mov only and there is the proof ( http://support.apple.com/kb/sp521 ) information given by Apple customer Support.
On Windows XP SP3, I have Adobe CS3, Video2Gif, AVS video Converter, Gif Optimizer...but as usual , products advertised do not do what they pretend to do on Windows platform, it's just a matter of making you downloading any s*t that can crashed you PC.
So now I am left in limbo between a cross platform operating system that can accept software for their respective OS but can do the job I want them to do.
I call upon any Genius that will be able to resolve my issue which is to convert movies in .mov to animated .gif to insert them as animated background for a webpage.
Thank you very much.
PS: I'm sorry guys I'm out of box of chocolate but will be happy to send one to whoever resolve my concern.

First question would be why you want (or need) the ancient .gif file in the first place:
http://en.wikipedia.org/wiki/GraphicsInterchangeFormat
QuickTime Player Pro can import dozens of image file formats and import "Image Sequence" (up to about 65,000) to display as a .mov file.
Such a small palette of colors is available in the .gif file format and they look really ugly if colors are removed from your source files. The .png format allows more colors (and alpha channels for transparency) and are supported by all modern browsers.
You can export nearly any supported video format to "Image Sequence" via QuickTime Player Pro. Use a modern image editing app to convert (ugh) them to Graphics Interchange Format and then a dedicated GIF creation app to make your file. No doubt you will be disappointed by the results.

How do I hide the mask layer when exporting as animated GIF ?

Hi,
I have designed the following logo for my football team's website.
It plays fine as a flash file but when I export it as an animated GIF file, it shows the bright pink mask layer. Obviously I don't want it to. Has anybody an idea of how to rectify this problem ?
Thanks,
Phil

Peter,
Success! I finally got my head round it Indeed, I can see now your point about the export method being preferable, it's also much quicker than my old "print PDF" method! Like I say, publishing isn't my area of expertise and I get comfortable and set in my ways with certain ways of doing things, especially with computers!
Bob,
Like I was saying to Peter, that makes sense now. I guess my not appreciating the process of PDF creation and thus my incorrect use of the terminology may have confused the issue. With regards the link you sent me, wow it certainly seems I'm not the only one who gets confused! Fortunately it seems my problem is now solved and I have learned to produce a better product!
Thanks again guys!
....now I wonder how I can make my dissertation interactive....

Open and edit animated .gif while preserving frame timing

CS4 Premium Design Edition, Win XP
I was disappointed with the removal of Image Ready from CS3 because although some of the functionality was placed into Photoshop 10, there was no way to open and edit an existing animated .gif while preserving the timing of each individual frame. I was told on the PS forum at the time that I really needed to use Fireworks. I resented that, because I was very happy with Image Ready and I didn't want to have to learn a new application just to gain functionality that had been included in previous versions of PS/IM.
I've now got CS4 Premium Design Edition which of course includs Fireworks... and here's what Help has to say on the subject of imported .gifs.
"Note: When you import an animated GIF, the state delay setting defaults to 0.07 seconds. If necessary, use the States panel to restore the original timing."
This is no use to me. What if I don't know the individual frame timings? What if there are 200 frames with varying timings?
Simple question: which current Adobe product is capable of importing a .gif while retaining the frame timings? If anyone knows, or if I've misunderstood the nature of the Fireworks Help quote above, I'd really appreciate some input here. Thanks :)
Not so simple question: why was an excellent gif-editing application thrown out to have its functionality partially replaced by a bunch of scripts and half-effective workarounds cooked up by desperate users ("import a gif by using the video import and typing *.* into the filename box..")? It's a fair question I think.
Mark

Hi Bob, that's not glib at all, it's a reasonable question.
I uninstalled it along with everything else when I installed CS3, in the reasonable expectation that whatever replaced IR would be at least equal in functionality.
Perhaps I should just dig out CS2 and install IM from there, but I have some serious reservations about doing so, because I don't know if/how a partial install of CS2 will impact upon my installation of CS4, and I'm not confident of getting support.
I am also curious to know if/why Adobe actually removed basic functionality without replicating or replacing it in their other software. I really want to know: which recent, currently supported Adobe product
should I be using in order to regain this functionality? Or do Adobe no longer produce a geniuinely comprehensive .gif-editing application?
Mark

Animated GIF ignoring frame timing

I am trying to create simple animated GIFs with a few layers
of text that simply fade in and fade out in sequence. My initial
attempt worked perfectly. Most frames use the default 7/100's of a
second delay as they fade. A few frames were manually set to much
longer delays so that the text pauses, before fading out to be
replaced by the next text.
When I reopened the file, to adjust the background color, and
then re-saved it, the GIF now plays straight through, ignoring the
timing of each frame. Nothing I do now can get it to pause on the
appropriate frames. I've tried cutting the symbols out and pasting
them into a new file, removing the animation from the symbols and
reapplying it, etc.
Any ideas, anyone?
Thanks in advance.

None, None.

Edit animated gif

Hi,
How can I edit an animated gif in Photoshop Elements 6 for Mac?
When I open the file there is just the first frame in one layer - no other layers available.
Thanks!

Thanks Barbara!
Barbara B. wrote:
... then bring it to PSE.
I can't drag the single frames from Preview to PSE, because PSE 6 doesn't run in window mode.
(Is this improved in the current version?)
I can only drag the single frames to the desktop (as TIFF files, I guess transparency info is lost then?).
Barbara B. wrote:
... there's a bug beginning in PSE 6 where you can't change the frame delay rate from the default when you save an animated gif.
What's the default frame delay rate? Maybe it's just what I need.
Barbara B. wrote:
You might want to look into a free program like giffun from stone.com instead.
Yes that's maybe a better idea. It doesn't have to be free software. Can you recommend something good?
Thanks again!

Can i open and edit animated GIF in Adobe Photoshop Touch?

Can i open and edit animated GIF in Adobe Photoshop Touch?

No, only regular static GIF images are supported. The desktop version of Photoshop does support this however.

Animated GIFs are ridiculously large - why?

Hi all,
I cannot figure out why the animated GIFs I am exporting are
so massive in file size. For example, I import a small 5-frame
650Byte GIF. I edit the size of the canvas to pad it to a square
(from 54x40 to 54x54, or something like that), then I save it with
the following settings:
Animated GIF
Exact Palette
0 Loss
4 Colours (5 including alpha channel)
No dither
And it comes out as 64.4KB. How can the file size increase by
100 times with barely any change? Even if I import it, change
nothing and save the file with the same settings as above, it's
still 64.4KB. Is Fireworks padding the file with unnecessary
information or something?
Thanks for any help,
John.

> But the original image is an animated GIF and it's less
than 1KB big! So
> how
> does it increase in size 100 times when I save it
even if I don't
> change
> anything about the image before saving? There is no
PNG file but I can
> link
> you to the original 650 Byte Animated GIF:
I'm confused. What is this I am looking at. What have you
done to it to
make it increase in weight?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Quircus" <[email protected]> wrote in
message
news:g6fohk$mip$[email protected]..
> But the original image is an animated GIF and it's less
than 1KB big! So
> how
> does it increase in size 100 times when I save it
even if I don't
> change
> anything about the image before saving? There is no
PNG file but I can
> link
> you to the original 650 Byte Animated GIF:
>
>
http://www.aotplaza.com/Prod.gif
>
> Is it something to do with my settings perhaps? Like
telling it to save
> extra
> information in the file?
>

Animated gif creation...

Similar Messages

Maybe you are looking for