(animated) Loading message

Hi,
I am trying to display an animated "Loading" message with the execution of an iView. The iView points to a JSP that takes a fair amount of time to execute; before I try to create something of my own, could I reuse the portal mechanism to display it?
How can I invoke this functionality? Is this EPCM?
Thank you,
Adrian

Hi,
I cannot use the message bar element as it is too small. I need an image that could be displayed in the middle of the screen as I have multiple iViews.
The solutions I've found on SDN so far seem to use EPCM; I wasn't able to make them work and see if they are suitable for my case. As EPCM is Javascript, I don't know how that would work since Javascript is client side and requires the page to be loaded to execute. It is the loading time of the page that I am trying to fix though...
I am dissapointed such a little thing would take forever to implement... if it is out-of-the-box feature, where is it documented?
Thanks,
Adrian

Similar Messages

  • Movie Loading Message

    Another seemingly simple question, yet I can't find the
    answer. When I load the flv into Flash with the playback, can I
    create a movie loading message and if so, how? When I went to my
    site from home, it seemed to take a long time for the animation to
    load, I didn't know if there was a wait to get that "hold on, I'm
    loading" message. I see there is information for doing it with
    movie clips and such but I didn't see it for the .flv's.
    Thanks.

    This is how far I am out of my league, I don't even know what
    AS2 or AS3 is off hand. I have to look it up. Thanks for responding
    though to this and my previous one about blurred text. You are
    right on the blurred text one, I thought the customer wanted a
    media bar and I needed flv to do that, now after today's meeting,
    it was a miscommunication on both our parts. However, it's all done
    now and ready for review. Next time, we will just use play and
    pause buttons in flash. Flv is way too much work for small
    animations. Thanks again, I'm sure I'll be back as I learn to make
    video.

  • Help with animated gif messages

    I can't seem to get animated GIFS with music as a SMS or a MMS to play. They are sent from people with phones like the Razor, LG, Envy etc. on the same network as mine ( Verizon ). When I get the message it will show the GIF for about 1 second then it dissapears, then the music plays. It will also give me the option to open the attachments or slides but the GIFS don't open . I can get Video messages from anyone and the videos plays fine. In the past when I opened one of these messages it would kill the audio on my phone and I would have to do a hard reboot for my phone to work even though I could still receive SMS and MMS messages, just the audio on the phone died. I was told the new OS 4.5 would correct this. The only thing it fixed was now if I get a animated GIF message it still does not play but my phone does work and I don't have to reboot. Is there a setting I need to change or is this not supported? I have 2 Curves 8330 OS 4.5.0.77 BIS on Verizon with the unlimted BB plan.
    Thanks,
    Leo
    Solved!
    Go to Solution.

    GIF file format is not supported by Blackberry. Check the details of the supported file formats by BlackBerry.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Mail won't fully load messages

    Ever since updating to 10.4.5, I open Mail, and the circle that shows the progress gets to about 50% to 95% (differs every time) and then hangs. I let it sit for an hour, still nothing. The only way to stop it is to force quit, and sometimes that takes a minute or two. My modem light is blinking like it's transferring data from the 'net, but Mail never fully loads the messages. I can see the headers, but clicking on them gives me the spinning beach ball and Mail says 'Loading Message' in the preview box.
    Thanks.
    iMac G5 17 1.8 Ghz   Mac OS X (10.4.5)   1 GB ram

    Does this happen with all messages or only specific messages.
    It sounds like that this might be an HTML email and Mail is trying to download images from a remote site. Perhaps the remote site is down or a certain image within the email is linked wrong and Mail is trying to download an image that isn't there.
    That's a big problem with HTML emails. Try viewing plain text emails and see if you get the same result.
    Bronson

  • Pc suite wont send or load messages

    I have a nokia n70 with all the latest updates but for some reason when i connect the n70 up to the laptop and want to send messages through nokia suite it wont work. EVERY time it just says "Failed to send the message". It also doesnt load messages in my inbox either. Please help me.

    I have exactly the same problem after upgrading via the "Update Phone Software" icon on the Nokia PC Suite interface.
    Sending and loading of messages worked perfectly before the upgrade. Now I can not do either. Very Frustrating.
    I previously had version 7.1.40.6 which which worked fine and I have now re-installed it after removing the upgraded version using:  Nokia_PC_Suite_Cleaner_7_1_1.exe.
    But the problem remains.  Nokia Support please advise how to resolve this issue and get my current version (7.1.40.6) of Nokia PC Suite working again.

  • Apple Mail - why does it load messages so slowly?

    On my old computer, running Snow Leopard, Apple Mail loaded messages instantly.
    Now, on my new, and much, much faster retina MacBook Pro, it takes Apple Mail 2 to 4 seconds to load even a text-only message.
    It doesn't even make a difference if there is a large image in the message, or not.
    Mail just takes forever loading.
    Have you noticed the slow-down of Mail as well?

    Back up all data.
    Select the named mailbox in the mailbox list, then select
    Mailbox ▹ Rebuild
    from the menu bar. Try to delete the message again.

  • I downloaded Firefox but can't open it. I keep getting "The connection to the server was reset while the page was loading" message. If it's a firewall issue, how do I change my firewall to accept Firefox?

    I have used Firefox for a number of years but some time ago I got a virus on my computer. I loaded eset nod32, removed the virus and cleaned the old files etc. using ccleaner.com. Now I keep getting the "The connection to the server was reset while the page was loading" message and I haven't been able to use firefox since then. I have uninstalled and re-installed it several times with no avail. I suspect there is something in my windows frrewall stopping it.

    If you want to check the Firewall, follow this-
    1. Click Start Menu > Control Panel > Security Center.
    2. Under the "Manage security settings for" click Windows Firewall.
    3. On the Exceptions tab, do one of the following-
    1. If Mozilla Firefox Firefox is there in the list, make sure it's checked.
    2. If Mozilla Firefox is not there, close the Windows Firewall window.

  • I rented Iron Man 2 and it stopped 1/4 the way in, got loading message.

    Last night I rented iron man 2 hd on my new apple tv and about a quarter of the way in I got a loading message and it took about 20 minutes for it to start playing again. It happened about three more times. I used Netflix and had no issue plus stream stuff from my mac with no issues. It really bumbed me out because I had not seen the movie before and it took baout an hour longer to watch with all the stops. I don't think this was a network issue rather than a glitch in the new rental streaming on iTunes. I would like a refund but I guess that is more hassle than it's worth. I hope this doesn't happen again on my next rental. has anyone else tried a rental with the new apple tv and had this issue?

    Consider yourself lucky you even got to watch any of the movie! I rented Avatar last night in HD and it said it would be ready in 229 minutes. Yeah. Streaming wise the Xbox 360 has them beat hands down. I can hit play on there in HD and it starts to play almost instantly.

  • Unable to load Message Catalog - Mqji

    I have written a Java program using MQSeries Libraries. This program reads from and writes to two queues of a Queue Manager on a different machine. This program works fine when it is run from Unix prompt. But when I try to call this program from Oracle8i stored procedures, it gives the same above message :
    'Unable to load Message Catalog - Mqji'.
    I have loaded all the MQSeries Classes from com.ibm.mq and com.ibm.mqservices alongwith my java class file using loadjava utility of Oracle8i. I have also loaded the all mqji* files from /../mqm/java/lib directory.
    Do I need to set up anything else to run my Java Program from Oracle8i database?
    null

    I have written a Java program using MQSeries Libraries. This program reads from and writes to two queues of a Queue Manager on a different machine. This program works fine when it is run from Unix prompt. But when I try to call this program from Oracle8i stored procedures, it gives the same above message :
    'Unable to load Message Catalog - Mqji'.
    I have loaded all the MQSeries Classes from com.ibm.mq and com.ibm.mqservices alongwith my java class file using loadjava utility of Oracle8i. I have also loaded the all mqji* files from /../mqm/java/lib directory.
    Do I need to set up anything else to run my Java Program from Oracle8i database?
    null

  • How do i get rid of original loaded message on screen on l7680

    how do I get rid of original loaded message on screen of my L7680

    Hi...
    pls do these steps to reset your printer back to factory defaults....
    Hope this will work...
    1. while  the printer is on- unplug the power cord.
    2. when the printer switched off- pls press and hold 3 and # key buttons while reconnecting the power cord back to the printer.
    3.when you see a message " Improper shutdown" just press ok to continue
    4.select your appropriate language and country to continue
    5. wait the printer to initialize.
    6. When you see the normal screen, reconnect the printer again back to the wireless network using the wireless set-up wizzard from the printer's control panel.
    7. Try to print and scan wirelessly.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • SQL LOADER  message : Point de validation COMMIT atteint - nombre d'enreg

    Hello
    I am loading a csv file into an oracle table via SQL LOADER
    Each time i invoke it i get the folowing message :
    SQL LOADER message : Point de validation <COMMIT> atteint - nombre d'enregis. logiques 52. (i am french version of apex)
    And the table is left empty.
    The translation of the above message is :
    SQL LOADER Validation Point <COMMIT> reached. number of logical records 52
    What doese it mean ?
    Thanks in advance.

    Yes
    my table is empty and
    and this is my control file :
    load data
    infile 'i:\csvs\mvh051.csv'
    into table mvhist051
    fields terminated by ';' optionally enclosed by '"'
    (ETABLI,NUPIECE,NUMLIGNE,DATEOP,JOURNAL,COMPTE,CODEN,LIBELLE,MONTANT,SENS,DATEVALEUR,OPERATION,NPIECE,CORIG,SOLDE,MVAPUR)
    hear is a sample of bide file :
    5100;2052;1;01/01/2005;ARB;1120060;0;report de solde 2004;6122867,27;D;01/01/2005;98;;1
    5100;2053;1;01/01/2005;ARB;1120070;0;report de solde 2004;223639,17;D;01/01/2005;98;;1
    5100;2054;1;01/01/2005;ARB;1261000;0;report de solde 2004;4680204207,00;D;01/01/2005;98;;1
    5100;2055;1;01/01/2005;ARB;1271100;0;report de solde 2004;81895715591,44;D;01/01/2005;98;;1
    ETABLI;NUPIECE;NUMLIGNE;DATEOP;JOURNAL;COMPTE;CODEN;LIBELLE;MONTANT;SENS;DATEVALEUR;OPERATION;NPIECE;CORIG;SOLDE;MVAPUR
    Please not that the last line is the heading columns names. I dont under stand why
    it is copied.

  • Constantly getting "Loading" messages when trying to open mail

    Constantly getting "Loading" messages when trying to open messages within "Mail." Funny, these appear to be messages sent to my .mac account. Apparently, I am able to open gmai.com messages. Any advice.

    What does the error message say? (Precise text, please.)

  • Best Practice with Spark, display an animated loading screen

    In the past I would use Flash to create assests and then write the actionscript to interact with those assets.  So if I wanted to show an animated loading screen, I would create it in flash with the animation tools, set up it up to be a class of "LoadingScreen", then whenever I wanted to show a loading screen I would just create a new instance of LoadingScreen and add it to the stage.  When I eventually get a responce from my server I would remove the LoadingScreen.
    I want to do this in Flash Builder using the latest tools (states, spark, skinning, etc).  How would you do this?
    I imagine I won't have to create a seperate state for my various pages plus an extra state for each page showing the loading screen, correct? (page1, page1Loading, page2, page2Loading, etc)
    I have created the animated loading screen in Flash and exported the file out as a swc, so I have access to it in Builder, but what do I do from there, I can't do an addChild.
    Any ideas?  I am still trying to get my head around how to work with all of these new tools.

    I'm not really sure what you were doing before, but you can use the Flash Component Kit to export your Flash content and bring it in to Flex.  Flash Builder exposes this more readily today as you can create a Flash component, and it'll open up Flash Authoring and automatically use the Flash Component Kit for Flex behind the scenes.  If you dont' care much about getting the sizing of your Flash content correct in Flex, you could just addChild() your Flash content to a UIComponent, which is what I assume you were doing before.
    In terms of Spark states and skins, I'm not really sure what your question is.  You can drop your Flash component in to a skin if you want and use states to control when it is visible just like another other component in Spark.

  • "resource not loaded" message

    Hello!
    I´ve a library that was implemented on LabView 5.1 and it worked fine.
    Then, one day, i tried to open this library using LabView 7, and it
    worked as well, but now, whenever i try to open the program using
    LabView 5.1 it pops up a "resource not loaded" message.
    Well, i´m lost... any help will be appreciated.
    Thank you,
    Luanna

    Hi osu7582, and a warm welcome to the forums!
    Did it ever work on the iBook?
    Is it IMAP or POP account?
    Open Activity Monitor in Applications>Utilities, how much Memory free & Hard Disk space does it show?
    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup

  • Missing Loading Message in webDynpro iview

    Hi,
    we have developed some WebDynpros. We have created some webdynpro iview to embed these webdnypros into a portal role. When I run the webdynpro without the portal or in the preview of the iview creator, the round role of the loading message is displayed well. But when I embed the iview into the portal role, the loading message is not vissible during the webdynpro picks up the data from backend system.
    We are using SAP NW04s SPS10. The parameter of the ivew to show the loading message is still enabled.
    Has anyone of you similiar experiences?
    Thanks a lot.
    Best Regards,

    Hi Guys
    Have u found the solution for the issue..
    since i am currently facing the same problem
    i am running on NW sp16
    it would be highly appreciated if you can share across the solution
    Thanks
    Kumar T

Maybe you are looking for